Effect of high-pressure treatment on rheological, thermal and structural changes in Basmati rice flour slurry

Transglutaminase-induced soybean protein isolate cold-set gels treated with combination of ultrasound and high pressure: Physicochemical properties and structural characterization

Soybean protein isolate (SPI) was treated by the combined exposure to ultrasound and high pressure and then subjected to transglutaminase (TGase)-catalyzed cross-linking to prepare SPI cold-set gels. The effects of combined treatments on physicochemical and structural properties of TGase-induced SPI cold-set gels were investigated. The combination of ultrasound and high pressure promoted the covalent disulfide bonds and ε-(γ-glutaminyl) lysine isopeptide bonds as well as non-covalent hydrophobic interactions, which further improved the gelation properties of SPI compared to ultrasound or high pressure alone. In particular, the 480 W ultrasound followed by high pressure treatment of gels led to higher strength (120.53 g), water holding capacity (95.39 %), immobilized water (93.92 %), lightness (42.18), whiteness (51.03), and elasticity (G' = 407 Pa), as well as more uniform and compact microstructure, thus resulting in the improved gel network structure. The combination of two treatments produced more flexible secondary structure, tighter tertiary conformation and higher denaturation degree of protein in the gels, leading to more stable gel structure. The structural modifications of SPI contributed to the improvement of its gelation properties. Therefore, the combined application of ultrasound and high pressure can be an effective method for improving the structure and properties of TGase-induced SPI cold-set gels.

The Application of High-Hydrostatic-Pressure Processing to Improve the Quality of Baked Products: A Review

The current trend in the food industry is towards "clean label" products with high sensory and nutritional quality. However, the inclusion of nutrient-rich ingredients in recipes often leads to sensory deficiencies in baked goods. To meet these requirements, physically modified flours are receiving more and more attention from bakery product developers. There are various findings in the literature on high hydrostatic pressure (HHP) technology, which can be used to modify various matrices so that they can be used as ingredients in the baking industry. HHP treatments can change the functionality of starches and proteins due to cold gelatinization and protein unfolding. As a result, the resulting ingredients are more suitable for nutrient-rich bakery formulations. This review describes the information available in the literature on HHP treatment conditions for ingredients used in the production of bakery products and analyses the changes in the techno-functional properties of these matrices, in particular their ability to act as structuring agents. The impact of HHP-treated ingredients on the quality of dough and bakery products and the effects on some nutritional properties of the treated matrices have been also analysed. The findings presented in this paper could be of particular interest to the bakery industry as they could be very useful in promoting the industrial application of HHP technology.

Processing strategies to improve the breadmaking potential of whole-grain wheat and non-wheat flours

Strategies to increase the bio-functionality of staple food, such as bread, by incorporating whole-grain wheat flour or flour from other, non-wheat grains instead of refined wheat flour are often constrained with the lack of their techno-functionality, despite the associated beneficial effect on consumers' health and well-being. Most of the available studies investigating the possibilities to improve technological and sensory quality of bread prepared using whole-grain wheat and non-wheat flours still rely on formulation approaches in which different additives and novel ingredients are used as structuring agents. Less attention has been given to technological approaches which could be applied to induce structural changes on biopolymer level and thus increase the breadmaking potential of whole grains such as: modification of grain and biopolymers structure by germination, flour particle size reduction, dry-heat or hydrothermal treatment, atmospheric cold plasma, high-pressure processing or ultrasound treatment. Strategies to modify processing variables during breadmaking like dough kneading and hydration modification, sourdough fermentation or non-conventional baking techniques application are also poorly exploited for bread preparation from non-wheat grains. In this paper, the challenges and opportunities of abovementioned processing strategies for the development of bread with whole-wheat flours and non-wheat flours from underutilised gluten-containing or gluten-free cereals and pseudocereals will be reviewed throughout the whole breadmaking chain: from grain to bread and from milling to baking. Feasibility of different strategies to increase the technological performance and sensory quality of bread based on whole-grain wheat flours or flours from other, non-wheat grains will be addressed considering both the environmental, safety and nutritive advantages.

Turbo-Treatment of Rice Flour to Improve Technological Functionality

Turbo-technology (i.e., a heat/shear treatment) potential in modifying rice flour technological properties (i.e., damaged starch, pasting properties, apparent cold viscosities, and color) depending on cooking temperature (120–200 °C), added water (30–40%), and drying temperature (160–200 °C) was evaluated. Applying a Box–Behnken design, highly significant (p < 0.001) models were found for moisture, damaged starch, pasting properties, and cold viscosities. The most important factor was the added water, significantly (p < 0.001) affecting all treated flour characteristics. The optimization resulted in 200 °C as cooking and drying temperature and 40% added water, but values of damaged starch and cold viscosities in the treated flour were still low. Thus, flour was overnight wetted (40% water) before cooking and drying at 200 °C, obtaining high values of damaged starch (49.5 ± 1.5 g/100 g db) and cold viscosities (from 6213 to 21,436 cP). The study represents a guide for the application of turbo-technology to design flour with tailored technological properties.

Changes in Physicochemical Properties and Qualities of Red Brown Rice at Different Storage Temperatures

The effects of storage temperature on the physicochemical properties and qualities of red brown rice were investigated in this study. The samples were vacuum-packed in nylon/polyethylene pouches and stored at 15 °C, 25 °C and 35 °C for 12 weeks. The moisture content decreased as storage time was prolonged. Rice stored at 15 °C and 25 °C had a lower falling range of water content compared to the samples stored at 35 °C. Free fatty acid values increased fastest when samples were stored at a high temperature, and the rise can be effectively delayed at low temperatures. The pH of residual cooking water and adhesiveness decreased, while the heating water absorption rate and hardness increased during storage for red and brown rice. Low-field nuclear magnetic resonance results indicate that water molecules migrated, the binding force of H protons became stronger and the bonds between molecules became closer with increased storage duration. Temperature had an obvious correlation with starch granules and protein structure, characterized by a scanning electron microscope and Fourier transform infrared spectroscopy. Low temperatures significantly retarded those changes. The results indicate that storage temperature is a vital factor affecting the physicochemical properties and qualities of red brown rice and provided reference and theoretical basis for the actual storage of red brown rice.

Rheological, thermal, and structural properties of high-pressure treated Litchi (Litchi chinensis) kernel starch

Starch isolated from litchi kernel was subjected to high-pressure (HP) treatment at selected pressures (300, 450 and 600 MPa) for 10 min, and evaluated for its rheological, morphological, thermal and structural properties. The amylose content of native litchi kernel starch (LKS) was 17.4%, which increased significantly upon pressurization. The temperature sweep test of the untreated starch sample resulted in the peak G' and G″ values of 3417 and 283 Pa, respectively, and those values decreased after pressurization. Oscillatory rheological measurements showed the frequency dependency of tested starch pastes. Furthermore, the mechanical rigidity of the starch pastes improved with pressure treatment. Morphological studies revealed that starch granule structure remained intact after pressurization; however, pressure >450 MPa resulted in surface roughness and small cavities. HP treatment significantly influenced thermal properties of LKS, in particular at 450 and 600 MPa, where a significant drop in the transition temperatures and enthalpy values were recorded. The HP-treated starch samples exhibited distinct X-ray diffraction pattern of native LKS i.e. the blend of A- and B-type allomorphs with a predominating A-type crystalline structure. Upon pressure treatment, the disappearance of 2θ peak at 5.6° and significant changes in peak intensities confirmed the structural change in the starch matrix.

Evaluation of Changes in Protein Quality of High-Pressure Treated Aqueous Aquafaba

Chickpea cooking water (CCW), known as aquafaba, has potential as a replacement for egg whites due to its emulsion and foaming properties which come from the proteins and starch that leach out from chickpeas into the cooking water. High pressure (HP) processing has the ability to modify the functional characteristics of proteins. It is hypothesized that HP processing could favorably affect the functional properties of CCW proteins by influencing their structure. The objective of this study to evaluate the effect of HP treatment on the associated secondary structure, emulsion properties and thermal characteristics of CCW proteins. A central composite rotatable design is used with pressure level (227-573 MPa) and treatment time (6-24 min) as HP variables, and concentration of freeze dried CCW aquafaba powder (11-29%) as product variable, and compared to untreated CCW powder. HP improves aquafaba emulsion properties compared to control sample. HP reduces protein aggregates by 33.3%, while β-sheets decreases by 4.2-87.6% in which both correlated to increasing protein digestibility. α-helices drops by 50%. It affects the intensity of some HP treated samples, but not the trend of bands in most of them. HP treatment decreases Td and enthalpy because of increasing the degree of denaturation.

The journey from white rice to ultra-high hydrostatic pressurized brown rice: an excellent endeavor for ideal nutrition from staple food

Although brown rice (BR) contains significantly higher levels of nutrients than the traditionally used polished white rice (WR), its consumption among the population is still not noteworthy. WR and BR are essentially same grain. The only difference between the two is the application of an exhaustive milling procedure during the processing of WR that removes all other layers of the grain except the portion of its white endosperm. BR, on the other hand, is prepared by removing only the outer hull of the rice seed. Thus, in addition to its inner endosperm, the bran and germ are also left on the BR. Hence, BR retains all its nutrients, including proteins, lipids, carbohydrates, fibers, vitamins, minerals, tocopherols, tocotrienols, γ-oryzanol, and γ-aminobutyric acid (GABA) packed into the bran and germ of the seed. Since BR tastes nutty and takes longer to cook than WR, it is not appreciated by the consumers. However, these problems have been circumvented using non-thermal ultra-high hydrostatic pressure (UHHP)-processing for the treatment of BR. A superior modification in the physicochemical and functional qualities of UHHPBR, along with its ability to curb human diseases may make it a more palatable and nutritious choice of rice over WR or the untreated-BR. Here, we have reviewed the mechanism by which UHHP treatment leads to the modification of nutrients such as proteins, lipids, carbohydrates, and fibers. We have focused on the effects of rice on cell and animal models of different conditions such as hyperlipidemia, diabetes, and hypertension and the possible mechanisms. Finally, we have emphasized the effects of UHHPBR in human cases with rare conditions such as osteoporosis and brain cognition - two age-related degenerative diseases of the elderly population.

Effects of high hydrostatic pressure on the rheological properties and foams/emulsions stability of Alyssum homolocarpum seed gum

The ability to modify food and increase the shelf life by enhanced stability using nonthermal process is of interest to many food companies. Here, we investigate the effects of high hydrostatic pressure (HHP), as a nonthermal process, at various pressure levels (200, 400, and 600 MPa for 30 min) on the functional properties of aqueous dispersions of Alyssum homolocarpum seed gum (AHSG). In this regard, the rheological properties, foam stability, and emulsion stability of the HHP-treated gums were analyzed and compared. Dynamic oscillatory test indicated that the HHP-treated gums had more gel-like behavior than viscous-like behavior (storage modulus > loss modulus) at designated pressures. When AHSG was treated by HHP, both elastic (G') and viscous (G″) moduli were increased compared to the native AHSG. The native- and HHP-treated gums exhibited a shear-thinning (pseudoplastic) behavior. Furthermore, the pressure levels have a significant effect on consistency coefficient, flow behavior index, and yield stress (p < .05) of AHSG. The results showed that the HHP-treated gums lead to improve the foam and emulsion stability of AHSG. Finally, we assume that HHP-treated AHSG improves texture in the food materials.

Effects of high hydrostatic pressure on the ordered structure including double helices and V-type single helices of rice starch

This study mainly aimed to investigate the influents of high hydrostatic pressure (HHP) on the ordered structures of starch, for this purpose, we compared the ordered structure of rice starch treated by HHP and heat, including long- and short-range ordered structures and thermodynamic properties at similar levels of gelatinization degree (DG). X-ray diffractometer, Fourier transform infrared spectrometer (FTIR), ¹³C cross polarization magic angle spinning/NMR, and Differential scanning calorimeter were used to detect crystal structure, band height ratio in FTIR spectra (R), double helix structure, and thermodynamic behavior. Results showed that HHP-treated rice starch (HHGS) had greater crystallinity, larger R, and more double helix and V-type single helix structures as compared to heat-treated rice starch (HGS) at a similar DG. The thermodynamic analysis illustrated that T_o of HHGS was lower as compared to HGS. The ordered structure of HHGS was close packaged. HHP simultaneously induced annealing and pressure-induced gelatinization until achieving a certain degree of gelatinization.

Effect of heat treatment to sweet potato flour on dough properties and characteristics of sweet potato-wheat bread

The effect of heat treatment at 90, 100, 110 and 120 ℃ for 20 min to sweet potato flour on dough properties and characteristics of sweet potato-wheat bread was investigated. The lightness (L*) and a* of sweet potato flour samples after heat treatment were increased, while the b* were decreased significantly, as well as the particle size, volume and area mean diameter ( p < 0.05). A slight change of the microstructures of sweet potato flour was observed, where the number of irregular granules increased as the temperature increased from 90 to 120 ℃. Compared with sweet potato flour samples without heat treatment and with heat treatment at 90, 100 and 120 ℃, the gelatinization temperature and enthalpy change of sweet potato flour at 110 ℃ were the lowest, which were 77.94 ℃ and 3.67 J/g, respectively ( p < 0.05). After heat treatment, gas retention of the dough with sweet potato flour increased significantly from 1199 ml without heat treatment to 1214 ml at 90 ℃ ( p < 0.05). In addition, specific loaf volume of sweet potato-wheat bread with sweet potato flour after heat treatment increased significantly, which was the largest at 90 ℃ (2.53 cm3/g) ( p < 0.05). Thus, heat treatment at 90 ℃ to sweet potato flour could be potentially used in wheat bread production.

Rheometric Non-Isothermal Gelatinization Kinetics of Chickpea Flour-Based Gluten-Free Muffin Batters with Added Biopolymers

An attempt was made to analyze the elastic modulus (G′) of chickpea flour (CF)-based muffin batters made with CF alone and with added biopolymers (whey protein (WP), xanthan gum (XG), inulin (INL), and their blends) in order to evaluate their suitability to be a wheat flour (WF) substitute in muffins, and to model the heat-induced gelatinization of batters under non-isothermal heating condition from 25 °C to 90 °C. A rheological approach is proposed to determine the kinetic parameters (reaction order (n), frequency factor (k₀), and activation energy (E_a)) using linearly-increasing temperature. Zero-order reaction kinetics adequately described batter gelatinization process, therefore assuming a constant rate independent of the initial G′ value. The change of the derivative of G′ with respect to time (dG′/dt) versus temperature is described by one exponential function with activation energies ranging from 118 to 180 kJ·mol⁻¹. Control wheat gluten batter, with higher and lower starch and protein contents, respectively, than CF-based batters, exhibited the highest E_a value. Formulation of CF-based gluten-free batters with starch and protein contents closer to the levels of WF-based batter could be a strategy to decrease differences in kinetic parameters of muffin batters and, therefore, in technological characteristics of baked muffins.

In vitro digestibility and changes in physicochemical and structural properties of common buckwheat starch affected by high hydrostatic pressure

High hydrostatic pressure (HHP), a non-thermal processing technology, was applied at 120, 240, 360, 480, and 600MPa to assess its effect on the in vitro digestibility, physicochemical, and structural properties of common buckwheat starch (CBS). HHP treatment resulted in CBS granules with more rough surfaces. With the increasing pressure level, amylose content, pasting temperature, and thermal stability substantially increased and relative crystallinity, hardness, swelling power, and viscosity decreased. At 120-480MPa, HHP did not affect the 'A'-type crystalline pattern of CBS. However, at 600MPa, HHP contributed to a similar 'B'-type pattern. Compared with native starch, HHP-modified CBS samples had lower in vitro hydrolysis, reduced content of rapidly digestible starch, and increased levels of slowly digestible starch and resistant starch. These results revealed that the in vitro digestibility, physicochemical, and structural properties of CBS are effectively modified by HHP.

Effect of presoaking high hydrostatic pressure on the cooking properties of brown rice

Effects of presoaking-high hydrostatic pressure (PHHP) on cooking time, hardness, gumminess, springiness, and microstructure of brown rice were evaluated. Compared with traditional soaking treatment, PHHP significantly shorten the cooking time of brown rice from 34 to 14 min. The hardness of brown rice treated by PHHP reduced remarkably, which is lower than that treated by soaking process and similar to that of white rice. The gumminess and springiness of brown rice dramatically decreased under pressure above 500 MPa. However, the water uptake capacity of brown rice treated by PHHP was not obviously affected, whose moisture contents were much lower than that of soaked samples. The analysis of thermal properties revealed that the enthalpy of brown rice was influenced by PHHP, and the denaturation of brown rice components generated. These results and microstructure analysis revealed that the structures of pericarp and aleurone layer of brown rice were damaged by PHHP, which allows water to be easily absorbed by the rice kernel during cooking process. PHHP treatment could be a potentially applicable pretreatment for improving cooking properties of brown rice.