Wheat flour enriched with oat β -glucan: A study of hydration, rheological and fermentation properties of dough

Physicochemical properties and structure of rice dough and protein based on TGase combined with sodium metabisulfite modification

To improve the toughness of the rice dough, protein transglutaminase (TGase) combined with sodium metabisulfite (SMB) modification was used. The influences of modification on rice dough and protein were investigated, and their physicochemical and structural characteristics were analyzed. Mechanical analysis results indicated that the tanδ and texture characteristics of the modified rice dough were close to those of the wheat dough. The content of weakly bound water increased after rice dough modification. The average particle size of the modified rice protein (MRP) increased. The α-helix and β-turn increased, the β-sheet of MRP was reduced. The hydrogen, ionic, and hydrophobic bond contents of the MRP were significantly higher than those of the unmodified rice protein (URP). The results showed that TGase combined with SMB changed the URP network structure, thereby effectively regulating the viscoelastic balance of the unmodified rice dough.

Highly cost-effective wheat starch-stearic acid complexes enabled by microwave processing: Structural properties, anti-digestion, and molecular dynamics simulation

Microwave (MW) heating shows higher efficiency in preparing wheat starch-stearic acid (WS-SA) complexes than the traditional water bath (WB) heating method, while the detailed "time-energy-quality" evaluations and the potential anti-digestion mechanism of the MW-processed WS-SA remain further exploration. In this study, 95 % time cost and 73 % energy consumption were saved when using MW processing WS-SA, and the MW-processed complexes were verified to show significantly higher relative crystallinity, short-range ordered structure degree, thermal stability, complex index, and resistant starch content. Molecular dynamics (MD) simulation demonstrated that MW treatment notably facilitated the binding rate of amylose and SA molecules, generating a tight and stable helical structure through hydrogen bonds and van der Waals forces. Analyses of solvent-accessible surface area and water status cross-verified that the denser structure could endow the MW-processed complexes with higher resistance to water solvation effects and correspondingly reduce the water mobility for enzymatic hydrolysis reactions, ultimately making the MW-processed complexes more undigestible. This study provides a further understanding of the anti-digestion mechanisms of the MW-processed WS-SA from the molecular level, and it is expected that the current work could attract more concerns to the highly cost-effective MW heating method for processing starchy food.

Mechanism underlying the effect of soluble oat β-glucan and tea polyphenols on wheat gluten aggregation characteristics

The mechanism of how the coexistence of oat β-glucan (OβG) and tea polyphenols (TP) impacts gluten aggregation properties was investigated. The OβG might form interchain hydrogen bondings and compete for water with gluten, which could increase gluten aggregation and the gluten network's expansion, leading to its increasing average particle size (by 17.23 %) with 5%OβG. The physicochemical characteristics of TP and OβG + TP groups showed similar changing trends, indicating the predominant effect of TP; however, the effect was, to some extent, enhanced with the presence of OβG. This might be because OβG induced a more expanded network of gluten, favoring the access and attack of TP to unfold or disrupt the gluten structure by breaking disulfide bonds, as confirmed by the red-shifts in fluorogram, increasing content of free sulfhydryl by 250 % (without OβG) and 312 % (with OβG), and decreasing particle size of gluten by 10.43 % (without OβG) and 21.08 % (with OβG) when the addition of TP was 2 %. Moreover, with the increasing of TP, the tremendous unfolding or disrupting gluten structure exposed more amino acids whereas decreased the intermolecular contacts and extended chains of gluten, consequently leading to the increasing hydrogen bonds and hydrophobic interactions while reducing the content of β-sheets, respectively.

Effects of xanthan gum and hydroxypropyl methylcellulose on the structure and physicochemical properties of triticale gluten during fermentation

The effects of 1 % xanthan gum (XG) and hydroxypropyl methylcellulose (HPMC) on the physicochemical and structural properties of triticale gluten (TG) during fermentation were investigated. Rheological analysis revealed that the addition of XG or HPMC decreased G' and G″ values, while increasing tanδ and recovery strain of triticale gluten during fermentation. Thermal gravimetric analysis demonstrated that triticale gluten added with XG after fermentation exhibited the highest residual mass, showing a 9.3 % increase compared to TG. Microscopic observations indicated that the addition of XG or HPMC during fermentation resulted in a more continuous and compact network structure of triticale gluten. Analysis of secondary structure, disulfide bond formation, and macromer content revealed that 1 % XG significantly enhanced the formation of interchain disulfide bonds (1.9 μmol/g), elevated the β-folding ratio (43.58 %), and increased the gluten-macromer content (2.2 %) during fermentation. Surface hydrophobicity and electrophoresis analyses suggested that the interaction between hydrocolloids and gluten enhanced the exposure of hydrophobic groups of gluten. This study offers insights into the potential applications of XG and HPMC in fermented triticale products.

The influence of non-starch polysaccharides on the formation mechanism of wheat dough

The study examined the effects of oat β-glucan (OβG), chitosan (CTS), araboxylan (AX), and fructosan (FOS) on wheat dough formation. Adding 0-7 % OβG, AX, and FOS increased SS content, enhancing gluten stability. D-AX and D-FOS showed higher β-sheet structures, higher air retention and gluten network, smaller pores and denser structures, higher elastic and viscosity moduli. Excessive OβG and CTS could reduce the dough stability, and β-turn and β-sheet ratios, respectively. Therefore, B-7AX and B-7FOS exhibited lower hardness indices during storage, leading to a smoother appearance and more orderly gas chamber distribution. The study provides a theoretical foundation for using non-starch polysaccharides in flour-based products.

A review on the hydration properties of dietary fibers derived from food waste and their interactions with other ingredients: opportunities and challenges for their application in the food industry

Dietary fiber (DF) significantly affects the quality attributes of food matrices. Depending on its chemical composition, molecular structure, and degree of hydration, the behavior of DF may differ. Numerous reports confirm that incorporating DF derived from food waste into food products has significant effects on textural, sensory, rheological, and antimicrobial properties. Additionally, the characteristics of DF, modification techniques (chemical, enzymatic, mechanical, thermal), and processing conditions (temperature, pH, ionic strength), as well as the presence of other components, can profoundly affect the functionalities of DF. This review aims to describe the interactions between DF and water, focusing on the effects of free water, freezing-bound water, and unfreezing-bound water on the hydration capacity of both soluble and insoluble DF. The review also explores how the structural, functional, and environmental properties of DF contribute to its hydration capacity. It becomes evident that the interactions between DF and water, and their effects on the rheological properties of food matrices, are complex and multifaceted subjects, offering both opportunities and challenges for further exploration. Utilizing DF extracted from food waste exhibits promise as a sustainable and viable strategy for the food industry to create nutritious and high-value-added products, while concurrently reducing reliance on primary virgin resources.

Insights into the enhancement mechanism of rheological properties of dough induced by wheat flour maturation: The view from gluten proteins aggregation

To elucidate the mechanisms underlying the changes in the rheological properties of dough made from wheat flour during maturation, the molecular structure of gluten before and after maturation was characterized. Wheat flour was matured under three distinct conditions for predetermined durations. The development time, stability, and maximum force of dough peaked at 7.10 min, 8.58 min, and 88.98 N, respectively, after 40 days of maturation at 25 °C and 40 °C. Compared to the control, the storage modulus of dough made from wheat flour matured at 40 °C increased, while creep compliance decreased, indicating improved deformation resistance and a closer resemblance to viscoelastic solid materials. SDS-PAGE and molecular weight distribution indicated that maturation induces the binding of gluten peaks, evoking small molecular weight proteins to form larger protein clusters through folding. Compared to the control, the content of disulfide bonds significantly (P < 0.05) increased, tightening the protein network, while fluorescence intensity decreased after 40-50 days. This is accompanied by a distinct cross-linkage structure, confirmed by AFM. Among the three maturation conditions, 40 °C had the most pronounced effect, followed by 25 °C. This study offers insights and a theoretical basis for adjusting maturation conditions to enhance wheat flour quality.

The effects of adding various starches on the structures of restructured potato-based dough and the oil uptake of potato chips

BACKGROUND

The material composition significantly influences the oil absorption and quality characteristics of fried food products. The oil absorption of restructured potato chips is highly dependent on the structural properties of the restructured potato-based dough produced prior to frying. In this study, three types of starch were added to modify the structure of restructured potato-based dough, allowing the production of potato chips with less oil absorption.

RESULTS

Distinct differences were observed among the three types of starch in terms of amylose content, chain length distribution, swelling power, solubility, crystalline structure and pasting properties. The addition of wheat starch, corn starch and tapioca starch changed the rheological properties, water distribution and strength of the restructured dough. Importantly, adding wheat starch and corn starch significantly lowered the oil content of potato chips by 7.94% and 13.06%, respectively. The reduction in oil absorption by potato chips was attributed to the increased strength of the starchy gel network of the dough, a slower rate of water evaporation and a limitation of dough expansion during frying.

CONCLUSION

Adding wheat starch or corn starch to restructured potato-based dough resulted in a decrease in the oil absorption of potato chips by creating a stronger starchy gel network in the dough. This study could guide the development of suitable material compositions, which are important for producing fried food products with lower oil content. © 2024 Society of Chemical Industry.

Effect of highland barley treated with heat-moisture on interactions between gluten and starch granules in dough

This study aimed to investigate the effect of heat-moisture treatment (HMT)-modified highland barley (HB) on interactions between gluten and starch granules in dough. The results demonstrated that HB addition increased the water absorption, weakened the extensibility, increased the storage modulus (G') and loss modulus (G″), decreased tan δ (G"/G') of dough. The textural and stress relaxation results showed that HB increased the hardness and elastic modulus (E2) of the dough, requiring more stress to compress the dough. Also, the increase in sulfhydryl and surface hydrophobicity all confirmed the addition of HB induced the deterioration of gluten network structure. Furthermore, HMT-HB improved farinograph quality number of flour, decreased tan δ of dough compared with HB. The E2, coefficient of viscosity (η) and hardness increased, while the relaxation time (τ) decreased with increasing HMT strength of HB, suggesting the formation of a tighter dough structure. The secondary structure and microstructure analyses revealed that the HMT could reduce the damage of HB to dough quality. These results indicated that HMT had the potential to enhance the interaction between starch and protein, leading to a denser dough matrix. This study facilitates the basic theory for the comprehensive utilization of HB in the food industry.

Cereal dietary fiber regulates the quality of whole grain products: Interaction between composition, modification and processing adaptability

The coarse texture and difficulty in processing dietary fiber (DF) in cereal bran have become limiting factors for the development of the whole cereal grain (WCG) food industry. To promote the development of the WCG industry, this review comprehensively summarizes the various forms and structures of cereal DF, including key features such as molecular weight, chain structure, and substitution groups. Different modification methods for changing the chemical structure of DF and their effects on the modification methods on physicochemical properties and biological activities of DF are discussed systematically. Furthermore, the review focusses on exploring the interactions between DF and dough components and discusses the effects on the gluten network structure, starch gelatinization and retrogradation, fermentation, glass transition, gelation, and rheological and crystalline characteristics of dough. Additionally, opportunities and challenges regarding the further development of DF for the flour products are also reviewed. The objective of this review is to establish a comprehensive foundation for the precise modification of cereal DF, particularly focusing on its application in dough-related products, and to advance the development and production of WCG products.

Layer-by-Layer Nanoparticle Assembly for Biomedicine: Mechanisms, Technologies, and Advancement via Acoustofluidics

The deposition of thin films plays a crucial role in surface engineering, tailoring structural modifications, and functionalization across diverse applications. Layer-by-layer self-assembly, a prominent thin-film deposition method, has witnessed substantial growth since its mid-20th-century inception, driven by the discovery of eligible materials and innovative assembly technologies. Of these materials, micro- and nanoscopic substrates have received far less interest than their macroscopic counterparts; however, this is changing. The catalogue of eligible materials, including nanoparticles, quantum dots, polymers, proteins, cells and liposomes, along with some well-established layer-by-layer technologies, have combined to unlock impactful applications in biomedicine, as well as other areas like food fortification, and water remediation. To access these fields, several well-established technologies have been used, including tangential flow filtration, fluidized bed, atomization, electrophoretic assembly, and dielectrophoresis. Despite the invention of these technologies, the field of particle layer-by-layer still requires further technological development to achieve a high-yield, automatable, and industrially ready process, a requirement for the diverse, reactionary field of biomedicine and high-throughput pharmaceutical industry. This review provides a background on layer-by-layer, focusing on how its constituent building blocks and bonding mechanisms enable unmatched versatility. The discussion then extends to established and recent technologies employed for coating micro- and nanoscopic matter, evaluating their drawbacks and advantages, and highlighting promising areas in microfluidic approaches, where one distinctly auspicious technology emerges, acoustofluidics. The review also explores the potential and demonstrated application of acoustofluidics in layer-by-layer technology, as well as analyzing existing acoustofluidic technologies beyond LbL coating in areas such as cell trapping, cell sorting, and multidimensional particle manipulation. Finally, the review concludes with future perspectives on layer-by-layer nanoparticle coating and the potential impact of integrating acoustofluidic methods.

Enhancing Gluten Network Formation and Bread-Making Performance of Wheat Flour Using Wheat Bran Aqueous Extract

Wheat bran possesses diverse nutritional and functional properties. In this study, wheat bran aqueous extract (WBE) was produced and thoroughly characterized as a functional ingredient and improver for bakery application. The WBE contained 50.3% total carbohydrate, 24.5% protein, 13.0% ash, 6.7% soluble fiber, 2.9% insoluble fiber, and 0.5% β-glucan. Notably, adding 7.5% WBE significantly increased the bread-specific volume to 4.84 cm3/g, compared with the control of 4.18 cm3/g. Adding WBE also resulted in a remarkable improvement in dough properties. The WBE-enriched dough showed increased peak, setback, breakdown, and final viscosities, along with higher storage and loss modulus. Scanning electron microscopy analysis further revealed that the WBE promoted the aggregation of protein and starch within the dough. The extractable gliadin to glutenin ratio increased with 5 and 7.5% WBE additions, compared with the control and 2.5% WBE addition. WBE did not significantly alter the starch gelatinization temperature or dough extension properties. These findings demonstrate that the inclusion of WBE in wheat flour is a promising approach for producing high-quality bread that is enriched with dietary fiber and protein.

Effects of hydrocolloids on mechanical properties, viscoelastic and microstructural properties of starch-based modeling clay

The effects of various hydrocolloids (guar gum, xanthan gum, and carboxymethyl cellulose) on the texture, rheology, and microstructural properties of modeling clay prepared with cassava starch were investigated. Notably, incorporation of 3 % guar gum and 4 % xanthan gum into starch-based modeling clay resulted in enhancements of 94.12 % and 77.47 % in cohesiveness, and 64.70 % and 66.20 % in extensibility, respectively. For starch-based modeling clay with added guar gum and xanthan gum, compared to formulations without hydrocolloids, the linear viscoelastic range exceeded 0.04 %, and the frequency dependence of both maximum creep compliance (Jmax) and storage modulus (G') was significantly reduced. This indicates a more stable network structure and enhanced resistance to deformation. Results from Fourier Transform Infrared (FTIR) spectroscopy and X-ray diffraction (XRD) confirmed that the physical interactions between starch and various hydrocolloids, along with the addition of these hydrocolloids, inhibited the degradation effect of thermomechanical processing on the crystalline structure of starch. With the addition of guar gum, it is observed that a continuous and dense network structure forms within the starch-based modeling clay, and starch particles are distributed uniformly. In conclusion, hydrocolloids enhances the properties of starch-based modeling clay, introducing an innovative solution to the modeling clay sector.

Gluten-starch microstructure analysis revealed the improvement mechanism of Triticeae on broomcorn millet (Panicum miliaceum L.)

Understanding the mechanism by which Triticeae improves the quality of broomcorn millet (BM) is key to expanding the use of this crop to address food crises and food security. This study aimed to explore the effects of Triticeae on the disulfide bonds, secondary structures, microstructure, and rheological properties of BM dough, and to investigate the potential food applications of BM. Gluten protein, intermolecular SS, and β-Sheets content of the reconstituted doughs were significantly improved compared with BM dough, which improved disorderly accumulation of starch and gluten-starch interaction in BM dough. CLSM analysis showed that broomcorn millet-common wheat (BM-CW) and broomcorn millet-durum wheat (BM-DW) also possessed larger protein areas, smaller lacunarities, and better gluten-starch interactions in the reconstituted doughs. Disulfide bonds were positively correlated with the gluten network structure, and more disulfide bonds were formed in BM-CW (3.86 μmol/g), which promoted stronger mechanical resistance in BM-CW. Therefore, the combination of BM flour with CW and DW flours had better dough elasticity and stability. Finally, a potential evaluation and optimization scheme for BM as a cooked wheaten food is proposed to improve the reference for future food security and dietary structure adjustment of residents.

Promising effects of β-glucans on gelation in protein-based products: A review

Gel property is one of the most important abilities to endow protein-based food products with a unique texture and higher overall acceptability. Cereal β-glucan (BG) is widely applied in protein-based products to improve the stability of the protein gel by increasing water holding capacity, storage modulus (G'), loss modulus (G") and linking with protein through more exposed sites, making it easier to form a stronger three-dimensional gel network. In addition, BG may be cross-linked with proteins, or physically embedded and covered in protein network structures, interacting with proteins mainly through non-covalent bonds including hydrogen bonding and electrostatic interaction. Furthermore, the transition of the α-helix to the β-form in the protein secondary structure also contributes to the stability of the protein gel. The practical applications of BG from different cereals in protein-based products are summarized, and the rheological properties, microstructure of protein as well as the underlying interaction mechanisms between BG and protein are discussed. In conclusion, cereal BG is a promising polysaccharide in developing nutritional protein-based products with better sensory properties.

Radio-frequency treatment of medium-gluten wheat: effects of tempering moisture and treatment time on wheat quality

BACKGROUND

Wheat and wheat flour are important raw materials of staple foods. Medium-gluten wheat is now the dominant wheat in China. In order to expand the application of medium-gluten wheat, radio-frequency (RF) technology was used to improve its quality. Effects of tempering moisture content (TMC) of wheat and RF treatment time on wheat quality were investigated.

RESULTS

No evident change in protein content after RF treatment, but a reduction in wet gluten content of the sample with 10-18% TMC and RF treatment for 5 min, was observed. By contrast, protein content increased to 31.0% after RF treatment for 9 min in 14% TMC wheat, achieving the requirement of high-gluten wheat (≥30.0%). Thermodynamic and pasting properties indicated that RF treatment (14% TMC, 5 min) can alter the double-helical structure and pasting viscosities of flour. In addition, the results of textural analysis and sensory evaluation for Chinese steamed bread showed that RF treatment for 5 min with different TMC (10-18%) wheat could deteriorate wheat quality, while the wheat (14% TMC) treated with RF for 9 min had the best quality.

CONCLUSION

RF treatment for 9 min can improve wheat quality when the TMC was 14%. The results are beneficial to the application of RF technology in wheat processing and improvement of wheat flour quality. © 2023 Society of Chemical Industry.

Extrusion Modification of Wheat Bran and Its Effects on Structural and Rheological Properties of Wheat Flour Dough

The study investigated the extrusion modification of wheat bran and its effects on structural and rheological properties of wheat flour dough. Extruded bran showed better solubility of dietary fiber and structural porosity, leading to higher hydration and swelling power. Addition of extruded bran to dough caused water redistribution as an intensive aggregation of bound water to gluten matrix with reduced mobility. The bran-gluten interaction influenced by water sequestering caused partial gluten dehydration and conversion of β-turn into β-sheet, which demonstrated the formation of a more polymerized and stable gluten network. Farinographic data confirmed the promotion of dough stability with extruded bran addition at lower gluten content, while viscoelastic data suggested improved dough elasticity at all gluten contents by increasing elastic moduli and decreasing loss tangent. This study would be useful for interpreting the modification effect and mechanism of extrusion on cereal brans and provide valuable guidance for applying it as an effective modification technology on the commercial production of cereal bran and its flour products.

Mechanism underlying the weakening effect of β-glucan on the gluten system

The high β-glucan content in barley disrupts the gluten network in dough. Scanning electron microscopy (SEM), differential scanning calorimetry (DSC), fourier transform infrared spectroscopy (FTIR), and solid-state nuclear magnetic resonance (NMR) techniques were used to clarify how β-glucan affected the quality of the gluten network structure with β-glucan contents of 0-2%. The results suggest that the physical hindrance of the β-glucan gel destroyed the formation of the gluten network structure. When 1.0-2.0% β-glucan was added, the percentage of α-helical structures increased significantly. When the added amount of β-glucan reached 2.0%, the sulfhydryl group (SH) content increased from 8.06 to 10.27 µmol/g, and the disulfide bond (SS) content decreased from 240.09 to 217.38 µmol/g. The interaction between β-glucan and gluten mainly resulted from the interaction of electron-withdrawing groups, such as carbonyl groups (CO) and double bond carbons (CC), and carbon atoms on the side chains of β-glucan, which play an important role in the central structure of glutenin.

Effect of hydrocolloids on gluten proteins, dough, and flour products: A review

Hydrocolloids are among the most common components in the food industry, which are used for thickening, gel formation, emulsification, and stabilization. Previous studies have also found that hydrocolloids can affect the structures and properties of gluten proteins, dough, and flour products. In this review, hydrocolloids were separated into three categories: anionic, nonionic, and other hydrocolloids, and reviewed the effects of common hydrocolloids on gluten proteins, dough, and flour products. Hydrocolloids can affect the structures and properties of gluten proteins through gluten-hydrocolloids interaction, secondary structures, disulfide bonds, environment of aromatic amino acids, and chemical bonds. The properties of dough are affected by rheological, fermentation, and thermomechanical properties. Hydrocolloids are widely used in bread, Chinese steamed bread, noodles, yellow layer cake, and so on, which mainly affect their appearance, texture, and aging speed. This comprehensive review provides a scientific guide for the development and utilization of hydrocolloids and their applications in flour products, and provides a theoretical basis for improving the processing characteristics of products.

High β-Glucans Oats for Healthy Wheat Breads: Physicochemical Properties of Dough and Breads

Bread is a highly consumed food whose nutritional value can be improved by adding an oat flour (Avena sativa L.-variety Bonaerense INTA Calen-Argentina) to a high-industrial quality wheat flour (Triticum aestivum L.). This cultivar of oat contains high amounts of β-glucans, which act as a prebiotic fiber. Wheat flour was complemented with different amounts of oat flour (5, 15, and 25%). A contribution of hydrophilic components from oat flour was evident in the oat-wheat mixtures. At the same time, the high content of total dietary fiber led to changes in the rheological properties of the dough. Mixtures with a higher proportion of oats showed an increase in alveographic tenacity (stiffer dough), higher stability, and a lower softening degree in farinographic assays. The dough showed significant increases in hardness and gumminess, without significant changes in cohesiveness, i.e., no disruption to the gluten network was observed. Relaxation tests showed that the blends with a higher oat content yielded 10 times higher stress values compared to wheat dough. Analysis of the oat-wheat breads showed improvements in nutritional parameters, with slight decreases in the volume and crust color. The crumb showed significant increases in firmness and chewing strength as the amount of oats added increased. Nutritional parameters showed that lipids, dietary fiber, and β-glucans were significantly increased by the addition of oats. Sensory analysis achieved high response rates with good-to-very good ratings on the hedonic scale set. Thus, the addition of oats did not generate rejection by the consumer and could be accepted by them. Breads with wheat and oats showed nutritional improvements with respect to wheat bread, since they have higher dietary fiber content, especially in β-glucans, so they could be considered functional breads.

The use of time domain 1 H NMR to study proton dynamics in starch-rich foods: A review

Starch is a major contributor to the carbohydrate portion of our diet. When it is present with water, it undergoes several transformations during heating and/or cooling making it an essential structure-forming component in starch-rich food systems (e.g., bread and cake). Time domain proton nuclear magnetic resonance (TD ¹ H NMR) is a useful technique to study starch-water interactions by evaluation of molecular mobility and water distribution. The data obtained correspond to changes in starch structure and the state of water during or resulting from processing. When this technique was first applied to starch(-rich) foods, significant challenges were encountered during data interpretation of complex food systems (e.g., cake or biscuit) due to the presence of multiple constituents (proteins, carbohydrates, lipids, etc.). This article discusses the principles of TD ¹ H NMR and the tools applied that improved characterization and interpretation of TD NMR data. More in particular, the major differences in proton distribution of various dough and cooked/baked food systems are examined. The application of variable-temperature TD ¹ H NMR is also discussed as it demonstrates exceptional ability to elucidate the molecular dynamics of starch transitions (e.g., gelatinization, gelation) in dough/batter systems during heating/cooling. In conclusion, TD NMR is considered a valuable tool to understand the behavior of starch and water that relate to the characteristics and/or quality of starchy food products. Such insights are crucial for food product optimization and development in response to the needs of the food industry.

β-Glucan as a Techno-Functional Ingredient in Dairy and Milk-Based Products-A Review

The article systematizes information about the sources of β-glucan, its technological functions and practical aspects of its use in dairy and milk-based products. According to the analysis of scientific information, the main characteristics of β-glucan classifications were considered: the source of origin, chemical structure, and methods of obtention. It has been established that the most popular in the food technology of dairy products are β-glucans from oat and barley cereal, which exhibit pronounced technological functions in the composition of dairy products (gel formation, high moisture-binding capacity, increased yield of finished products, formation of texture, and original sensory indicators). The expediency of using β-glucan from yeast and mushrooms as a source of biologically active substances that ensure the functional orientation of the finished product has been revealed. For the first time, information on the use of β-glucan of various origins in the most common groups of dairy and milk-based products has been systematized. The analytical review has scientific and practical significance for scientists and specialists in the field of food production, in particular dairy products of increased nutritional value.

Corn silk flour fortification as a dietary fiber supplement: evolution of the impact on paste, dough, and quality of dried noodles

Corn silk flour is a natural, functional ingredient, rich in dietary fiber and polyphenols. Fortification of a wheat flour-based staple food such as dried noodles, with corn silk flour could directly affect the pasting properties of wheat flour and hydration properties of dough, and thus influence the quality of dried noodles. The competition for water between corn silk flour and wheat flour inhibited the gelatinization of starch and hindered the formation of the gluten network which harmed the cooking properties and decreased consumer acceptance of the resulting dried noodles. Nutritionally, the dietary fiber and polyphenols content of the resulting dried noodles was effectively improved, especially at a 6∼9% replacement rate. The current work demonstrates the feasibility of fabricating corn silk flour-enriched dried noodles and its nutritional superiority compared to the corresponding normal product.

Bioconversion of High-Calorie Potato Starch to Low-Calorie β-Glucan via 3D Printing Using Pleurotus eryngii Mycelia

Edible fungi play an important role in material and energy cycling. This study explored the role of Pleurotus eryngii mycelia in the transformation of potato high-calorie starch to low-calorie β-glucan. First, the 3D printing performance of the potato medium was optimized. After inoculating the fermentation broth of Pleurotus eryngii in 3D printing, we studied the microstructure and material composition of the product. Along with the increase in 3D printing filling ratio, the starch content of the culture product decreased from 84.18% to 60.35%, while the starch content in the solid medium prepared using the mold was 67.74%. The change in β-glucan content in cultured products was opposite to that of starch, and the content of the culture product increased from 12.57% to 24.31%, while the β-glucan content in the solid medium prepared using the mold was 22.17%. The amino acid composition and content of the 3D printing culture system and solid culture products prepared using the mold were similar. The 3D printing culture system promoted the bioconversion efficiency of mycelia. It also showed high application potential of Pleurotus eryngii mycelia for the preparation of low-calorie food.

Evaluation of passion fruit mesocarp flour on the paste, dough, and quality characteristics of dried noodles

Reasonable intake of high-fiber staple food is already one of the most effective measures in fiber deficiency disease prevention and control. Passion fruit mesocarp flour (PFMF), the primary byproduct during passion fruit processing, was utilized to manufacture high-fiber dried noodles. The presence of PFMF boosted wheat flour gelatinization and retrogradation. The competition for water between PFMF and wheat flour inhibited the formation of the gluten network, which harmed the cooking properties and decreased consumer acceptance of the resulting dried noodles. Nevertheless, PFMF fortification could considerably increase the dietary fiber content of noodles. Especially for noodles with 9% PFMF, the total dietary fiber content was greater than 6%, and they thus could be regarded as a high-dietary-fiber food. Generally, the current work demonstrates the feasibility of fabricating PFMF-enriched dried noodles and their nutritional superiority compared to the corresponding normal product.

Dietary fiber in bakery products: Source, processing, and function

Bakery products are prevalently consumed foods in the world, and they have been regarded as convenient dietary vehicles for delivering nutritive ingredients into people's diet, of which, dietary fiber (DF) is one of the most popular items. The food industry attempts to produce fiber-enriched bakery products with both increasing nutritional value and appealing palatability. As many new sources of DFs become available, and consumers are moving towards healthier diets, studies of using these DFs as functional ingredients in baked goods are becoming vast. Besides, the nutrition value of DF is commonly accepted, and many investigations have also revealed the health benefits of fiber-enriched bakery products. Thus, this chapter presents an overview of (1) trends in supplementation of DF from various sources, (2) impact of DF on dough processing, quality and physiological functionality of bakery products, and (3) technologies used to improve the compatibility of DF in bakery products.

Study on the Incorporation of Oat and Yeast β-Glucan into Shortbread Biscuits as a Basis for Designing Healthier and High Quality Food Products

According to international health and food organizations and authorities, people should limit fat intake since fat is the most caloric component of food and it is often a source of unsafe saturated fatty acids (FA) and trans isomers. The greatest health benefits come from replacing shorts with dietary fiber molecules. The aim of the study was to determine the possibility of reducing shortening content, which has an undesirable profile of FA, by addition of β-glucan molecules in shortbread biscuits. The effect of oat and yeast β-glucan supplementation on physical and sensory quality of products with reduced fat content (max 15%) were studied. It was shown that the substitution of shortening by β-glucan in shortbread biscuits is possible to a limited extent. Reduction in product energy value (up to 36 kcal/100 g) and content of undesirable FA (maximum 2.1 g/100 g) and increased of β-glucan content, regardless of the type, caused deterioration of biscuits quality and affected changes during storage. The substitution of shortening by β-glucan in food is a good way to improve nutritional value by increasing the amount of dietary fiber molecules, reducing calories, and amount of SFA in diets.

A Systematic Comparison of the Intrinsic Properties of Wheat and Oat Bran Fractions and Their Effects on Dough and Bread Properties: Elucidation of Chemical Mechanisms, Water Binding, and Steric Hindrance

This study aimed at elucidating the contribution of chemical interactions, water binding, and steric hindrance on the effect of wheat and oat brans and of their fractions, i.e., soluble and insoluble, on dough and bread properties. For such purpose, an inert filler, i.e., glass beads of comparable particle size and with no water binding capacity and moisture sorption properties, was also studied. The glass beads provided breads most similar to the control, indicating the limited role of steric hindrance. Brans and bran fractions showed distinct compositional and physical properties. The soluble fraction from oat bran, rich in β-glucan, was less hygroscopic than the wheat counterpart and could bind more water, resulting in larger detrimental effects on bread quality. The β-glucan content showed a prevalent role in affecting gluten development, the thermo-setting behaviour of the dough, and crumb texture, i.e., cohesiveness and resilience. Overall, the comparison between the two brans and their fractions indicated that the interplay between water binding, mainly provided by the insoluble fraction, and the plasticizing properties of the soluble bran fraction controlled the effects on bread volume and texture. From a compositional standpoint, β-glucan content was a determining factor that discriminated the effects of wheat and oat brans.

Effects of chitosan oligosaccharide and hyriopsis cumingii polysaccharide on the quality of wheat flour and extruded flour products

Abstract

Effects of chitosan oligosaccharide (COS) and hyriopsis cumingii polysaccharide (HCP) on the quality of wheat flour and corresponding extruded flour products were investigated in this work. The results showed that both COS and HCP are conducive to the improvement of dough quality. Moreover, compared to control group samples, the moisture content, expansion ratio and oil absorption rate of the samples were increased and the hardness were decreased with the addition of COS. These phenomena indicate the quality of extruded flour products became better in the presence of COS as well. However, HCP has little or no effect on the quality of extruded flour products may be due to its degradation under high temperature and pressure extrusion. COS with higher stability exhibited better improvement effects on the quality of extruded flour products and showed a promising prospect for application in extruded food industry.

Graphical Abstract

Insight into molecular and rheological properties of sprouted sorghum flour

This work investigated the effect of sprouting and drying post-sprouting on technological functionalities of sorghum flour as probed by Low-resolution Proton Nuclear Magnetic Resonance (¹H NMR) and Dynamic Mechanical Analysis (DMA). Multivariate statistics were used to assess the effect of flour (from sprouted and unsprouted sorghum, and wholewheat) and hydration level on flour-water systems molecular and viscoelastic properties. Overall, sorghum-based systems showed greater molecular mobility explaining poorer viscoelastic properties than those obtained from wheat. Sprouting affected the molecular properties of sorghum flour-water systems, while no differences were observed in the two sprouted samples dried in different conditions. However, sprouting did not affect the viscoelastic properties of sorghum-water systems. These results bolster the use of sprouted sorghum in composite flours for the development of sustainable finished products with high nutritional value and satisfactory technological and organoleptic properties.