Effect of steaming and defatting treatments of oats on the processing and eating quality of noodles with a high oat flour content

Rheological, thermal, and in vitro starch digestibility properties of oat starch-lipid complexes

The influence of oat lipids on the structural, thermal, rheological, and in vitro digestibility properties of oat starch under heat processing conditions was investigated. X-ray diffraction, fourier infrared spectroscopy, and differential scanning calorimetry revealed the formation of a V-shaped crystal structure between starch and lipid, resulting in enhanced orderliness and enthalpy. Oat lipids decreased the final viscosity and gel strength of oat starch while weakening the trend towards gel network formation. Additionally, oat lipids exhibited enhanced resistance to starch hydrolase, leading to elevated contents of slowly digestible starch and resistant starch. Consequently, this leads to an augmentation in the rate constants for the rapid digestion fraction (k1) and the slow digestion fraction (k2). When the lipid content reached 7.50 %, a significant increase of 42.20 % was observed in the maximum digestibility of slow digestion fraction (C∞2), while a notable decrease of 44.06 % was noted in the maximum digestibility of rapid digestion fraction (C∞1). The correlation analysis revealed that lipid content, final viscosity, and enthalpy exerted significant influences on in vitro starch digestion. These results demonstrate the substantial impact of lipid content on oat starch structure, subsequently affecting its thermal, rheological, and digestive properties.

Effect of milling and defatting treatment on texture and digestion properties of oat rice

Oat rice with great sensory acceptance was developed based on the combination method of milling and defatting (petroleum ether) treatment. In this study, the effect of milling and defatting treatment on the texture and digestion properties of oat rice was investigated. Results showed that milling and defatting treatment enhanced stickiness, enthalpy, and starch digestibility. The pasting temperature and hardness of oat rice were reduced. The lipid content of oat rice was significantly reduced by milling and defatting treatment, leading to a decrease in the formation of starch-lipid complex. Fourier transform infrared spectroscopy and X-ray diffraction analyses revealed that the application of milling and defatting treatments led to a reduction in the content of starch-lipid complexes in oats during the cooking process. Milling and defatting significantly enhanced both the rapid and slow digestion rates of oat rice. Specifically, the rapid digestion rate was found to be 2.5 times higher than the slow digestion rate. The nutritive components of oat rice were properly preserved, and the viscosity and elasticity of oat rice reached the maximum when milling for 40 s and defatting. This study provides a theoretical basis for oat products.

Sprouting and Hydrolysis as Biotechnological Tools for Development of Nutraceutical Ingredients from Oat Grain and Hull

Oat consumption has increased during the last decade because of the health benefits associated with its soluble dietary fiber (β-glucan), functional proteins, lipids, and the presence of specific phytochemicals, such as avenanthramides. Oat is consumed mainly as whole grain, and the hull (seed coat), comprising 25–35% of the entire grain, is removed, generating a large amount of waste/by-product from the milling industry. The objective of this study was to evaluate the use of biotechnological strategies, such as sprouting for oat grain (OG) and hydrolysis for oat hull (OH), to enhance antioxidant and anti-inflammatory properties and lower the glycemic index (GI). Sprouting produced significant (p ≤ 0.05) increases in free (32.10 to 76.62 mg GAE (100 g)−1) and bound phenols (60.45 to 124.36 mg GAE (100 g)−1), increasing significantly (p ≤ 0.05) the avenanthramide (2c, 2p and 2f) soluble phenolic alkaloid content and anti-inflammatory properties of OG. On the other hand, the hydrolysis of OH using Viscoferm (EH2-OH) and Ultraflo XL (EH21-OH) increased by 4.5 and 5-fold the release of bound phenols, respectively; meanwhile, the use of Viscoferm increased the 4.55-fold soluble β-glucan content in OH, reaching values close to those of OG (4.04 vs. 4.46 g (100 g)−1). The study shows the potential of both strategies to enhance the nutritional and bioactive properties of OG and OH and describes these processes as feasible for the industry to obtain an ingredient with high antioxidant and anti-inflammatory activities. Single or combined biotechnological tools can be used on oat grains and hulls to provide nutraceutical ingredients.

Improving the cold water swelling properties of oat starch by subcritical ethanol-water treatment

The granular cold water swelling oat starch was prepared by subcritical ethanol-water, and the changes of properties and structure on oat starch were investigated. The oat starch was modified at the temperature of 95 °C and ethanol concentration of 48% and showed a higher cold water swelling ability of 22.58 g/g, whereas native oat starch was 6.73 g/g. Modified oat starch granule was kept intact, and it was swollen when dispersing in the water. The gelatinization enthalpy declined to 0 J/g. The surface of modified oat starch granules was honeycomb and porous observed by scanning electron microscope. The X-ray diffraction showed the A-type crystal decreased and the V-type crystal increased, and the result was quantitatively confirmed by solid-state ¹³C NMR spectroscopy. The ratio of 1047 cm^-1/1022 cm^-1 (determined by Fourier transform infrared spectroscopy) of modified oat starch was decreased. The molecular weight distribution of modified oat starch was slightly reduced, and the amylose content increased from 26.18% to 31.68%, and only a small amount of carbohydrates leached during the modification. Subcritical ethanol-water modification improved the cold water swelling ability of oat starch. The starch crystals changed from A-type to V-type provide a potential mechanism of subcritical ethanol-water modified oat starch.

Effects of multi-frequency ultrasound on physicochemical properties, structural characteristics of gluten protein and the quality of noodle

In this study, the influence of multi-frequency ultrasound irradiation on the functional properties and structural characteristics of gluten, as well as the textural and cooking characteristics of the noodles were investigated. Results showed that the textural and cooking characteristics of noodles that contain less gluten pretreated by multi-frequency ultrasonic were ultrasonic frequency dependent. Moreover, the noodles that contain a smaller amount of sonicated gluten could achieve the textural and cooking quality of commercial noodles. There was no significant difference in the cooking and texture characteristics between commercial noodles and noodles with 12%, 11%, and 10% gluten pretreated by single-frequency (40 kHz), dual-frequency (28/40 kHz), and triple-frequency sonication (28/40/80 kHz), respectively. Furthermore, the cavitation efficiency of triple-frequency ultrasound was greater than that of dual-frequency and single-frequency. As the number of ultrasonic frequencies increased, the solubility, water holding capacity and oil holding capacity of gluten increased significantly (p < 0.05), and the particle size was reduced from 197.93 ± 5.28 nm to 110.15 ± 2.61 nm. Furthermore, compared to the control group (untreated), the UV absorption and fluorescence intensity of the gluten treated by multi-frequency ultrasonication increased. The surface hydrophobicity of gluten increased from 8159.1 ± 195.87 (untreated) to 11621.5 ± 379.72 (28/40/80 kHz). Raman spectroscopy showed that the α-helix content of all sonicated gluten protein samples decreased after sonication, while the β-sheet and β-turn content increased, and tryptophan and tyrosine residues were exposed. Through scanning electron microscope (SEM) analysis, the gluten protein network structure after ultrasonic treatment was loose, and the pore size of the gluten protein network increased from about 10 μm (untreated) to about 26 μm (28/40/80 kHz). This work elucidated the effect of ultrasonic frequency on the performance of gluten, indicating that with increasing frequency combination increases, the ultrasound effect became more pronounced and protein unfolding increased, thereby impacting the functional properties and the quality of the final product. This study provided a theoretical basis for the application of multi-frequency ultrasound technology in the modification of gluten protein and noodle processing.

Sandwich-type sheeting improved the processing and eating qualities of potato noodles

A technology called sandwich-type sheeting was used to produce noodles with potato flakes. The technical parameters of sheeting were first optimized. Then the processing and eating qualities of potato noodles made with sandwich-type sheeting and conventional sheeting were compared. Results showed that the optimal moisture of inner-layer dough and outer-layer dough was 41 and 37%, respectively. The suitable ratio of the thickness of inner layer to that of outer layer was 3:1. The tensile strength of the sandwich-type dough sheet was 1.285 times higher than that of conventional dough sheet. The cooking loss of the sandwich-type noodles was 37.0% lower than that of conventional noodles, and the adhesiveness decreased by 51.0%. In the sandwich-type noodles, the compact gluten network structure of outer wheat layer prevented the leaching of soluble substances in the inner layer added with potato flakes, improving the cooking and eating qualities of potato noodles.

Research on Progress in Combined Remediation Technologies of Heavy Metal Polluted Sediment

Heavy metals contaminated sediment has become a worldwide environmental issue due to its great harm to human and aquatic organisms. Thus, economical, effective, and environmentally-friendly remediation technologies are urgently needed. Among which, combined remediation technologies have attracted widespread attention for their unique advantages. This paper introduces combined remediation technologies based on physical-, chemical-, and bio-remediation of heavy metal polluted sediments. Firstly, the research progress in physical-chemical, bio-chemical, and inter-organismal (including plants, animals, microorganisms) remediation of heavy metal polluted sediments are summarized. Additionally, the paper analyzes the problems of the process of combined remediation of heavy metals in river sediments and outlooks the future development trends of remediation technologies. Overall, this review provides useful technology references for the control and treatment of heavy metal pollution in river sediments.