Rheological and emulsifying properties of arabinoxylans from various cereal brans

Combined treatment of rice bran by solid-state fermentation and extrusion: Effect of processing sequence and microbial strains

Solid-state fermentation (SSF) and extrusion are effective methods to improve the nutritional and sensory quality of rice bran. The effect of the processing sequence of SSF and extrusion and microbial strains on the quality of rice bran was studied. The results showed that the first SSF followed by extrusion increased the contents of phenolic, flavonoid and γ-oryzanol, but the color changed to brown. The first extrusion followed by SSF caused damage to bioactive components and antioxidant activity, but significantly increased the content of arabinoxylans. The difference between the two processing sequences may be related to the process time and the effect of substrate on microbial induction. Aspergillus oryzae and Neurospora sitophila were suitable for increasing the bioactive components of rice bran, while Lactiplantibacillus plantarum was suitable for increasing water-extractable arabinoxylan content. Different processing sequences and microbial strains have their advantages, and these results can provide reference for rice bran processing.

Effect of enzymatic hydrolysis of arabinoxylan on the quality of frozen dough during the subfreezing process

BACKGROUND

The objective of this investigation was to examine the impact of enzymatic hydrolysis of arabinoxylan (AX) on frozen dough quality under subfreezing conditions. The dough was subjected to freezing at -40 °C for 2 h and then stored at -9, -12, and -18 °C for 15 days. The water loss, freezable water content, water migration, and microstructure of the dough were measured.

RESULTS

The dough containing 0.8% cellulase enzymatically hydrolyzed AX (CAX) required the shortest duration when traversing the maximum ice-crystal formation zone (6.5 min). The dough with xylanase enzymatically hydrolyzed AX (XAX) demonstrated a faster freezing rate than the dough with CAX. The inclusion of both XAX and CAX in the dough resulted in the lowest freezable water loss and reduced freezable water content and free-water content levels, whereas the inclusion of xylanase-cellulase combined with enzymatically hydrolyzed AX resulted in higher free-water content levels. The textural properties of the subfreezing temperature dough were not significantly different from the dough stored at -18 °C and sometimes even approached or surpassed the quality observed in the control group rather than the dough stored at -18 °C. In addition, the gluten network structure remains well preserved in XAX- and CAX-containing doughs with minimal starch damage.

CONCLUSION

The enzymatic hydrolysis of AX from wheat bran can be used as a useful additive to improve the quality of frozen dough. © 2024 Society of Chemical Industry.

Lipid metabolism regulation by dietary polysaccharides with different structural properties

Lipid metabolism plays an important role in energy homeostasis maintenance in response to stress. Nowadays, hyperlipidemia-related chronic diseases such as obesity, diabetes, atherosclerosis, and fatty liver pose significant health challenges. Dietary polysaccharides (DPs) have gained attention for their effective lipid-lowering properties. This review examines the multifaceted mechanisms that DPs employ to lower lipid levels in subjects with hyperlipidemia. DPs could directly inhibit lipid intake and absorption, promote lipid excretion, and regulate key enzymes involved in lipid metabolism pathways, including triglyceride and cholesterol anabolism and catabolism, fatty acid oxidation, and bile acid synthesis. Additionally, DPs indirectly improve lipid homeostasis by modulating gut microbiota composition and alleviating oxidative stress. Moreover, the lipid-lowering mechanisms of particular structural DPs (including β-glucan, pectin, glucomannan, inulin, arabinoxylan, and fucoidan) are summarized. The relationship between the structure and lipid-lowering activity of DPs is also discussed based on current researches. Finally, potential breakthroughs and future directions in the development of DPs in lipid-lowering activity are discussed. The paper could provide a reference for further exploring the mechanism of DPs for lipid regulations and utilizing DPs as lipid-lowering dietary ingredients.

Wheat bran arabinoxylans: Chemical structure, extraction, properties, health benefits, and uses in foods

Wheat bran (WB) is a well-known and valuable source of dietary fiber. Arabinoxylan (AX) is the primary hemicellulose in WB and can be isolated and used as a functional component in various food products. Typically, AX is extracted from the whole WB using different processes after mechanical treatments. However, WB is composed of different layers, namely, the aleurone layer, pericarp, testa, and hyaline layer. The distribution, structure, and extractability of AX vary within these layers. Modern fractionation technologies, such as debranning and electrostatic separation, can separate the different layers of WB, making it possible to extract AX from each layer separately. Therefore, AX in WB shows potential for broader applications if it can be extracted from the different layers separately. In this review, the distribution and chemical structures of AX in WB layers are first discussed followed by extraction, physicochemical properties, and health benefits of isolated AX from WB. Additionally, the utilization of AX isolated from WB in foods, including cereal foods, packaging film, and the delivery of food ingredients, is reviewed. Future perspectives on challenges and opportunities in the research field of AX isolated from WB are highlighted.

Structural and rheological characterization of water-soluble and alkaline-soluble fibers from hulless barley

BACKGROUND

Highland hulless barley has garnered attention as a promising economic product and a potential healthy food ingredient. The present study aimed to comprehensively investigate the molecular structure of extractable fibers obtained from a specific highland hulless barley. Water-soluble fiber (WSF) and alkaline-soluble fiber (ASF) were extracted using enzymatic digestion and an alkaline method, respectively. The purified fibers underwent a thorough investigation for their structural characterization.

RESULTS

The monosaccharide composition revealed that WSF primarily consisted of glucose (91.7%), whereas ASF was composed of arabinose (54.5%) and xylose (45.5%), indicating the presence of an arabinoxylan molecule with an A/X ratio of 1.2. The refined structural information was further confirmed through methylation, 1 H NMR and Fourier-transform infrared spectroscopy analyses. WSF fiber exclusively exhibited α-anomeric patterns, suggesting it was an α-glucan. It has a low molecular weight of 5 kDa, as determined by gel permeation chromatography. Conversely, ASF was identified as a heavily branched arabinoxylan with 41.55% of '→2,3,4)-Xylp-(1→' linkages. ASF and WSF exhibited notable differences in their morphology, water absorption capabilities and rheological properties.

CONCLUSION

Based on these findings, molecular models of WSF and ASF were proposed. The deep characterization of these fiber structures provides valuable insights into their physicochemical and functional properties, thereby unlocking their potential applications in the food industry. © 2023 Society of Chemical Industry.

Development of sorghum arabinoxylan-soy protein isolate composite nanoparticles for delivery of curcumin: Effect of polysaccharide content on stability and in vitro digestibility

The purpose of this study was to fabricate composite nanoparticles using soy protein isolate (SPI) and sorghum bran arabinoxylan (AX) for the delivery of curcumin (Cur). The influences of AX concentrations on the physicochemical characteristic, stability and bioaccessibility of curcumin were investigated. The findings showed that the encapsulation efficiency of curcumin obviously increased upon incorporating AX in comparison to SPI-Cur particles. Hydrogen bonds and hydrophobic interactions were the primary driving forces for the formation of SPI-Cur-AX nanoparticles (SCA). SCA nanoparticles with 1.00 % AX exhibited a uniform size with orderly distribution, suggesting its remarkable physical stability due to the strengthened electrostatic repulsion. However, excessive AX led to aggregation of particles, a noticeable increase in size, and subsequently, a reduction in stability. Due to the heightened free radical scavenging capacity of sorghum AX, SCA nanoparticles exhibited superior antioxidant capabilities. Compared to free curcumin, encapsulation within composite particles significantly enhanced the retention rate and bioaccessibility of curcumin. This improvement was attributed to the potent emulsification ability of AX, which coordinated with bile salt to promote the transfer of curcumin into micelles. The research provides an effective strategy for developing food-grade delivery carriers aimed at enhancing dispersibility, stability and bioaccessibility of the fat-soluble bioactives.

Arabinoxylan in Water through SANS: Single-Chain Conformation, Chain Overlap, and Clustering

Using small-angle neutron scattering (SANS), we examine the structure and conformational behavior of wheat arabinoxylan (AX) prepared at various concentrations in a sodium phosphate aqueous buffer. As for another major hemicellulose, xyloglucan, we observe a small number of large clusters surrounded by AX chains that behave exactly as a polymer in good solvent with a Flory exponent ν = 0.588. The fit of the data at high q-values to a standard worm-like chain model gives the persistence length lp = 45 Å and cross section of the chains 2Rc = 11-12 Å. In addition, using a dedicated modeling approach, we extract from the SANS data at the intermediate q-range the correlation length ξ of the solutions in the semidilute regime. The decay of ξ with concentration follows a scaling law that further confirms the self-avoiding statistical behavior of the AX chains. This first comprehensive study about the properties of water-soluble AX at different length scales may help in the development of products and processes involving AX as a substitute for fossil carbon molecules.

Ultrasound-assisted extraction and characteristics of maize polysaccharides from different sites

Antitumor, antioxidant, hypoglycemic, and immunomodulatory properties are all exhibited by maize polysaccharides. With the increasing sophistication of maize polysaccharide extraction methods, enzymatic method is no longer limited to a single enzyme to extract polysaccharides, and is more often used in combination with ultrasound or microwave, or combination with different enzymes. Ultrasound has a good cell wall-breaking effect, making it easier to dislodge lignin and hemicellulose from the cellulose surface of the maize husk. The "water extraction and alcohol precipitation" method is the simplest but most resource- and time-consuming process. However, the "ultrasound-assisted extraction" and "microwave-assisted extraction" methods not only compensate for the shortcoming, but also increase the extraction rate. Herein, the preparation, structural analysis, and activities of maize polysaccharides were analyzed and discussed.

Enhancing the technofunctionality of γ-aminobutyric acid enriched germinated wheat by modification of arabinoxylan, gluten proteins and liquid lamella of dough

To enhance the technofunctionality of germinated wheat enriched with γ-aminobutyric acid, xylanase (Xyn) and glucose oxidase (Gox) were incorporated with emphasis on modifying the key components. Combination of Xyn and Gox enhanced steamed bread quality with optimum loaf volume and textural property. Continuous and dense gluten network was facilitated and improved viscoelasticity of dough. Water solubility of arabinoxylan (AX) enhanced with Xyn and the molecular weight was more homogeneous distributed throughout bread making process with Xyn and Gox. Polymerization behavior of α-/γ-gliadin and glutenin was suppressed in steamed bread, while incorporation of AX to insoluble proteins was enhanced by enzymes. In addition, the promoted formation of high molecular weight glycoprotein in the liquid lamella of dough enhanced the thermal stability of foams and contribute to superior quality of steamed bread. Results demonstrated that germinated wheat could be exploited as a functional ingredient with desirable technofunctionality by modification of the components.

Polysaccharides as wall materials in spray-dried microencapsulation of bioactive compounds: Physicochemical properties and characterization

Natural bioactive compounds (BCs) are types of chemicals found in plants and certain foods that promote good health, however they are sensitive to processing and environmental conditions. Microencapsulation by spray drying is a widely used and cost-effective approach to create a coating layer to surround and protect BCs and control their release, enabling the production of high functional products/ingredients with extended shelf life. In this process, wall materials determine protection efficiency, and physical properties, bioavailability, and storage stability of microencapsulated products. Therefore, an understanding of physicochemical properties of wall materials is essential for the successful and effective spray-dried microencapsulation process. Typically, polysaccharide-based wall materials are generated from more sustainable sources and have a wider range of physicochemical properties and applications compared to their protein-based counterparts. In this review, we highlight the essential physicochemical properties of polysaccharide-based wall materials for spray-dried microencapsulation of BCs including solubility, thermal stability, and emulsifying properties, rheological and film forming properties. We provide further insight into possibilities for the chemical structure modification of native wall materials and their controlled release behaviors. Finally, we summarize the most recent studies involving polysaccharide biopolymers as wall materials and/or emulsifiers in spray-dried microencapsulation of BCs.

Fabrication and biomedical applications of Arabinoxylan, Pectin, Chitosan, Soy protein, and Silk fibroin hydrogels via laccase - ferulic acid redox chemistry

The unique physiochemical properties and the porous network architecture of hydrogel seek the attention to be explored in broad range of fields. In the last decade, numerous studies on the development of enzymatically cross-linked hydrogels have been elucidated. Implementing enzyme based cross-linking for fabrication of biomaterials over other crosslinking methods harbor various advantages, especially hydrogels designed using laccase exhibits mild reaction environment, high cross-linking efficiency and less toxicity. To our knowledge this is the first report reviewing the formulation of laccase mediated cross-linking for hydrogel preparation. Here, laccase catalyzed synthesis of hydrogel using polysaccharide viz. arabinoxylan, sugar beet pectin, galactomannan, chitosan etc. and proteins namely soy protein, gelatin, silk fibroin were discussed on highlighting their mechanical properties and its possible field of application. We have summarized the role of phenolic acids in laccase mediated crosslinking particularly ferulic acid which is a component of lignocellulose, serving cell rigidity via crosslinkage. The review also discusses on various biomedical applications such as controlled protein release, tissue engineering, and wound healing. It is anticipated that this review will give a detailed information on different laccase mediated reaction strategies that can be applied for the synthesis of various new biomaterials with tailor made properties.

Isolation, Structural, Functional, and Bioactive Properties of Cereal Arabinoxylan─A Critical Review

Arabinoxylans (AXs) are widely distributed in various cereal grains, such as wheat, corn, rye, barley, rice, and oat. The AX molecule contains a linear (1,4)-β-D-xylp backbone substituted by α-L-araf units and occasionally t-xylp and t-glcpA through α-(1,2) and/or α-(1,3) glycosidic linkages. Arabinoxylan shows diversified functional and bioactive properties, influenced by their molecular mass, branching degree, ferulic acid (FA) content, and the substitution position and chain length of the side chains. This Review summarizes the extraction methods for various cereal sources, compares their structural features and functional/bioactive properties, and highlights the established structure-function/bioactivity relationships, intending to explore the potential functions of AXs and their industrial applications.

Purification of Arabinoxylans from Corn Fiber and Preparation of Bioactive Films for Food Packaging

Corn fiber, a by-product of the starch industry, is presently incorporated in animal feed. However, it has arabinoxylans as added-value components (besides ferulic acid) that should be valorized. In this work, the raw material, a fraction enriched in arabinoxylans from corn fiber, previously produced by alkaline extraction from corn fiber and pre-concentrated by ultrafiltration, was further purified. The use of ultrafiltration operated in diafiltration mode (dia-ultrafiltration) was evaluated for the purification of the arabinoxylans fraction. The objective was to maximize the removal of the small contaminants from the fraction and to maximize the permeability and/or the permeate flux, by selecting the relevant operating conditions involved in this process. The removal of contaminants (%) was estimated when their apparent rejection stabilized. Edible films were produced, from the resultant purified arabinoxylans fraction, using glycerol as plasticizer (30% dry basis). Additionally, films with the incorporation of ferulic acid were developed, in order to obtain barriers with antioxidant activity. The films were characterized in terms of mechanical properties, antioxidant activity and permeability to water vapor. The films prepared presented a good potential to be used as packaging for food products with low water content.

Effect of Ultrasound-Treated Arabinoxylans on the Oxidative Stability of Soybean Oil

Arabinoxylans (AX) are polysaccharides with antioxidant activity and emulsifying properties, which make them an attractive alternative for its potential application as a natural antioxidant in oils. Therefore, this work aimed to investigate the effect of ultrasonic treatment of AX on their antioxidant capacity and its ability to improve the oxidative stability of soybean oil. For this purpose, AX were exposed to ultrasonic treatment at 25% (100 W, AX-1) and 50% (200 W, AX-2) power and an operating frequency of 20 KHz during 15 min, and their macromolecular properties (weight average molecular weight (Mw), polydispersity index and intrinsic viscosity) were evaluated. The antioxidant capacity of AX was determined by the DPPH assay and Rancimat test. Results showed that ultrasonic treatment did not affect the molecular identity of the polysaccharide but modified its Mw distribution. AX-1 showed the highest antioxidant activity (75% inhibition) at 533 µg/mL by the DPPH method compared to AX and AX-2. AX at 0.25% (w/v) and AX-1 at 0.01% (w/v) exerted the highest protective effects on oxidative stability of soybean oil with induction periods of 7.69 and 5.54 h, respectively. The results indicate that AX could be a good alternative for the potential application as a natural antioxidant in oils.