Enhancing the osteogenic efficacy of human bone marrow aspirate: concentrating osteoprogenitors using wave-assisted filtration

Critical Analysis of cGMP Large-Scale Expansion Process in Bioreactors of Human Induced Pluripotent Stem Cells in the Framework of Quality by Design

Human induced pluripotent stem cells (hiPSCs) are manufactured as advanced therapy medicinal products for tissue replacement applications. With this aim, the feasibility of hiPSC large-scale expansion in existing bioreactor systems under current good manufacturing practices (cGMP) has been tested. Yet, these attempts have lacked a paradigm shift in culture settings and technologies tailored to hiPSCs, which jeopardizes their clinical translation. The best approach for industrial scale-up of high-quality hiPSCs is to design their manufacturing process by following quality-by-design (QbD) principles: a scientific, risk-based framework for process design based on relating product and process attributes to product quality. In this review, we analyzed the hiPSC expansion manufacturing process implementing the QbD approach in the use of bioreactors, stressing the decisive role played by the cell quantity, quality and costs, drawing key QbD concepts directly from the guidelines of the International Council for Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use.

Red blood cells and their releasates compromise bone marrow-derived human mesenchymal stem/stromal cell survival in vitro

PURPOSE

The use of bone marrow aspirate (BMA) and bone marrow aspirate concentrate (BMC) in the treatment of inflammatory orthopedic conditions has become a common practice. The therapeutic effect of BMA/BMC is thought to revolve primarily around the mesenchymal stem/stromal cell (MSC) population residing within the nucleated cell fraction. MSCs have the unique ability to respond to site of injury via the secretion of immunomodulating factors, resolving inflammation in diseased joints. Recently, the importance of hematocrit (HCT) in BMC has been debated, as the potential impact on MSC function is unknown. In the present study, we investigate MSC health over a short time-course following exposure to a range of HCT and red blood cell releasate (RBC_rel) conditions.

METHODS

Bone marrow-derived human MSCs in early passage were grown under conditions of 0%, 2.5%, 5%, 10%, 20% and 40% HCT and RBC_rel conditions for 3 days. At each day, the percentage of viable, apoptotic and necrotic MSCs was determined via flow cytometry. Relative viable MSC counts in each condition was determined to account for dynamic changes in overall MSC densities over the time-course. Statistical analysis was performed using a one-way ANOVA comparing test conditions to the control followed by a Dunnett's multiple comparison test.

RESULTS

Significant reductions in viable MSCs concurrent with an increase in necrotic MSCs in high HCT and RBC_rel conditions was observed within 24 h. At each successive timepoint, the percent and relative number of viable MSCs were reduced, becoming significant in multiple HCT and RBC_rel conditions by Day 3. Necrosis appears to be the initial mode of MSC death following exposure to HCT and RBC_rel, followed by apoptosis in surviving MSC fractions.

CONCLUSION

Various levels of HCT and RBC_rel severely compromise MSC health within 3 days and HCT should be controlled in the preparation of BMC products. Further, HCT of BMCs should be routinely recorded and tracked with patient outcomes along with routine metrics (e.g. nucleated cell counts, fibroblast-colony forming units). Differences in HCT may account for the inconsistencies in the efficacy of BMC reported when treating orthopedic conditions.

Combination of Filtered Bone Marrow Aspirate and Biomimetic Scaffold for the Treatment of Knee Osteochondral Lesions: Cellular and Early Clinical Results of a Single Centre Case Series

BACKGROUND

Osteochondral injury is a very common orthopaedic pathology, mainly affecting young, active population, with limited current treatment options. Herein we are presenting cellular and early clinical data of a patient series treated for chronic osteochondral lesions in the knee with a filter-based intra-operative bone marrow aspirate (BMA) separation device.

METHODS

Fifteen patients with chronic knee osteochondral lesions (60% females, 19-59 years) were included in this prospective case series. Filtered BMA (f-BMA), containing mesenchymal stem/stromal cells (MSCs), was combined with a biomimetic collagen-hydroxyapatite scaffold (CHAS) and implanted into the site of the lesion. Harvested BMA and post-separation f-BMA were analysed for blood cell counts, flow cytometry, and fibroblast colony forming units (CFU-Fs). Patients were followed for serious adverse events and graft failures. Clinical evaluation was assessed using the knee injury and osteoarthritis outcome score (KOOS). In 8 patients a magnetic resonance imaging (MRI)/arthroscopy were performed.

RESULTS

Cell suspension contained 0.027% CD271⁺ CD45^- 7-AAD^- cells, 0.15% CD73⁺ CD90⁺ CD105⁺ cells and 0.0012% CFU-Fs of all nucleated cells with 86% viability. Filtration process resulted in 12.8 (4.0-40.8) fold enrichment in terms of CFU-F content in comparison to initial BMA. No serious adverse events related directly to the osteochondral treatment were reported. After an average follow-up of 20 months (14-25) all KOOS subscales (Symptoms/Pain/Daily activities/Sport and recreation/Quality of life) increased significantly from pre-operative 55/56/67/30/30 to post-operative 73/76/79/51/52 (p values < 0.05), respectively. MRI or arthroscopic evaluation revealed nearly normal to normal overall International Cartilage Repair Society assessment in 7/8 patients.

CONCLUSION

The filter-based BMA separation procedure significantly increased the frequency of mesenchymal stem/stromal cells (MSCs), however their concentration was not increased. The clinical evaluation revealed high safety profile of the treatment and resulted in improved clinical status of the patients.

Assessing clinical implications and perspectives of the pathophysiological effects of erythrocytes and plasma free hemoglobin in autologous biologics for use in musculoskeletal regenerative medicine therapies. A review

Autologous biologics, defined as platelet-rich plasma (PRP) and bone marrow aspirate concentrate (BMC), are cell-based therapy treatment options in regenerative medicine practices, and have been increasingly used in orthopedics, sports medicine, and spinal disorders. These biological products are produced at point-of-care; thereby, avoiding expensive and cumbersome culturing and expansion techniques.

Numerous commercial PRP and BMC systems are available but reports and knowledge of bio-cellular formulations produced by these systems are limited. This limited information hinders evaluating clinical and research outcomes and thus making conclusions about their biological effectiveness. Some of their important cellular and protein properties have not been characterized, which is critical for understanding the mechanisms of actions involved in tissue regenerative processes. The presence and role of red blood cells (RBCs) in any biologic has not been addressed extensively. Furthermore, some of the pathophysiological effects and phenomena related to RBCs have not been studied. A lack of a complete understanding of all of the biological components and their functional consequences hampers the development of clinical standards for any biological preparation.

This paper aims to review the clinical implications and pathophysiological effects of RBCs in PRP and BMC; emphasizes hemolysis, eryptosis, and the release of macrophage inhibitory factor; and explains several effects on the microenvironment, such as inflammation, oxidative stress, vasoconstriction, and impaired cell metabolism.

•

Different biological formulations optimize disease specific regenerative treatment protocols.

•

Disintegrated RBC's release harmful components to regenerative therapy treatment vials.

•

The effectiveness of MSC injection depends on the quality of the bone marrow aspiration procedure.

•

PRP and BMC should contain minimal to no erythrocytes.

Osteogenic ability of rat bone marrow concentrate is at least as efficacious as mesenchymal stem cells in vitro

Cell therapy using bone marrow concentrate (BMC) or purified and expanded mesenchymal stem cells (MSCs) has been shown to have a promising osteogenic capacity. However, few studies have directly compared their relative osteogenic ability. The aim of this study was to compare the osteogenic ability of BMC isolated by density gradient centrifugation with bone marrow-derived MSCs in vitro using the cells of 3-month-old Sprague-Dawley rats. The isolated cells were seeded onto 24-well plates (1 × 10⁵  cells/well) and cultured in control growth media, osteogenic media with dexamethasone, or media without dexamethasone (which simulated the in vivo tissue environment). Alkaline phosphatase activity at week 2, osteocalcin using quantitative real-time polymerase chain reaction at week 4, and Alizarin red staining at week 4 were evaluated. In the osteogenic media with dexamethasone, BMC showed equivalent (osteocalcin) or even greater (Alizarin red staining) osteogenic ability compared to MSCs, suggesting that cross-talk among various cells in the BMC leads to greater osteogenesis. Furthermore, in the osteogenic media without dexamethasone, BMC showed equivalent (osteocalcin) or a trend for greater (Alizarin red staining) bone formation than MSCs alone. Our results suggest that BMC has at least comparable bone regeneration potential to MSCs. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B:2500-2506, 2019.

Size and dielectric properties of skeletal stem cells change critically after enrichment and expansion from human bone marrow: consequences for microfluidic cell sorting

The capacity of bone and cartilage to regenerate can be attributed to skeletal stem cells (SSCs) that reside within the bone marrow (BM). Given SSCs are rare and lack specific surface markers, antibody-based sorting has failed to deliver the cell purity required for clinical translation. Microfluidics offers new methods of isolating cells based on biophysical features including, but not limited to, size, electrical properties and stiffness. Here we report the characterization of the dielectric properties of unexpanded SSCs using single-cell microfluidic impedance cytometry (MIC). Unexpanded SSCs had a mean size of 9.0 µm; larger than the majority of BM cells. During expansion, often used to purify and increase the number of SSCs, cell size and membrane capacitance increased significantly, highlighting the importance of characterizing unaltered SSCs. In addition, MIC was used to track the osteogenic differentiation of SSCs and showed an increased membrane capacitance with differentiation. The electrical properties of primary SSCs were indistinct from other BM cells precluding its use as an isolation method. However, the current studies indicate that cell size in combination with another biophysical parameter, such as stiffness, could be used to design label-free devices for sorting SSCs with significant clinical impact.

Application of 3D-printed patient-specific skeletal implants augmented with autologous skeletal stem cells

Joint replacements have proved a medical success providing symptomatic relief and return to mobility in many patients with arthritis. However, multiple revision surgeries due to joint failure can result in complex revision scenarios with significant bone tissue loss, in an elderly population, which poses a significant clinical challenge. Computer-aided design–computer-assisted manufacturing (CAD–CAM) prototyped bespoke implants are currently being used as an alternative and innovative approach for joint restoration in salvage cases, while the incorporation of autologous skeletal stem cells to optimize regenerative capacity can enhance implant osseointegration. We present a case series of 11 patients with severe disability and significant bone loss due to failed joint replacements. The choice of CAD–CAM prototyped joint implants enhanced with autologous skeletal stem cells resulted in significant patient-reported clinical and radiological improvements.

The CD45lowCD271high Cell Prevalence in Bone Marrow Samples May Provide a Useful Measurement of the Bone Marrow Quality for Cartilage and Bone Regenerative Therapy

BACKGROUND

Bone marrow aspirates and concentrates are increasingly being used for musculoskeletal regenerative therapies, providing bone and cartilage progenitors. However, the quality of these bone marrow samples remains imprecise within clinical settings. As there is a need for the development of these therapies, a method of counting CD45CD271 cells was optimized and tested as an indicator of bone marrow sample quality.

METHODS

Bone marrow aspirates were collected from 54 donors (28 male and 26 female; median age of 48 years). The reagent concentrations were optimized for fast staining, and an acoustic-focusing flow cytometer (Attune) was used to enable automated CD45CD271 cell counting in bone marrow aspirates, bone marrow concentrates, and samples loaded onto a collagen scaffold. The CD45CD271 cell counts were compared with those obtained using another flow-cytometry-based method (LSR II) and with connective tissue progenitor (CTP) counts quantified using a colony forming unit-fibroblast (CFU-F) assay.

RESULTS

The optimized method enabled the counting of CD45CD271 cells within only 15 minutes. The quantified cell counts (median, 1,520; range, 96 to 20,992 cells/mL of bone marrow) were positively correlated with the CTP counts (p < 0.0001; r = 0.7237). In agreement with CFU-F and LSR II-based assays, the CD45CD271 cell counts quantified using the Attune-based method decreased with age in the samples from female but not male donors (p = 0.0015 and p = 0.3877, respectively). A significant increase in CD45CD271 cell counts was detected following bone marrow concentration (mean, 5-fold; 95% confidence interval [CI], 3.6 to 7.2-fold). Additionally, the number of CD45CD271 cells attached to the collagen scaffold was positively correlated with the number of progenitor cells that survived on the scaffold after 2-week culture (p = 0.0348).

CONCLUSIONS

An assay for counting CD45CD271 cells may provide a useful measurement of bone marrow quality. While the specificity of this measurement of CD45CD271 cells remained low in our experimental conditions, CD45CD271 cell counts were positively and modestly correlated with the prevalence of CTPs.

CLINICAL RELEVANCE

A fast and automated assessment of bone marrow aspirate/concentrate quality using CD45CD271 cell counting may be a useful tool for improving the quality of regenerative therapy.

Early loss of subchondral bone following microfracture is counteracted by bone marrow aspirate in a translational model of osteochondral repair

Microfracture of cartilage defects may induce alterations of the subchondral bone in the mid- and long-term, yet very little is known about their onset. Possibly, these changes may be avoided by an enhanced microfracture technique with additional application of bone marrow aspirate. In this study, full-thickness chondral defects in the knee joints of minipigs were either treated with (1) debridement down to the subchondral bone plate alone, (2) debridement with microfracture, or (3) microfracture with additional application of bone marrow aspirate. At 4 weeks after microfracture, the loss of subchondral bone below the defects largely exceeded the original microfracture holes. Of note, a significant increase of osteoclast density was identified in defects treated with microfracture alone compared with debridement only. Both changes were significantly counteracted by the adjunct treatment with bone marrow. Debridement and microfracture without or with bone marrow were equivalent regarding the early cartilage repair. These data suggest that microfracture induced a substantial early resorption of the subchondral bone and also highlight the potential value of bone marrow aspirate as an adjunct to counteract these alterations. Clinical studies are warranted to further elucidate early events of osteochondral repair and the effect of enhanced microfracture techniques.

Assessment of Methods for Rapid Intraoperative Concentration and Selection of Marrow-Derived Connective Tissue Progenitors for Bone Regeneration Using the Canine Femoral Multidefect Model

Treatment of large bone defects remains an unsolved clinical challenge, despite a wide array of existing bone graft materials and strategies. Local deficiency in osteogenic connective tissue progenitors (CTP-Os) due to tissue loss is one of the central biological barriers to bone regeneration. Density separation (DS) and selective retention (SR) represent two promising methods that can be used intraoperatively to rapidly concentrate cells and potentially select CTP-Os. This project was designed to compare DS and SR using the canine femoral multidefect (CFMD) model. Mineralized cancellous allograft (MCA) was used as a standardized scaffold for cell transplantation. Two experiments were performed using a cohort of six animals in each comparison. In Cohort I, unprocessed bone marrow aspirate (BMA) clot was compared to DS processing. MCA combined with raw BMA or DS processed cells produced a robust and advanced stage of bone regeneration throughout the defect in 4 weeks with reconstitution of hematopoietic marrow. However, the retention of DS processed cells and CTP-Os in the MCA matrix was low compared to BMA clot. In Cohort II, MCA with DS-T cells (addition of calcium chloride thrombin to induce clotting and enhance cell and CTP-O retention) was compared to MCA with SR cells. A mean of 276 ± 86 million nucleated cells and 29,030 ± 10,510 CTP-Os were implanted per defect in the DS-T group. A mean of 76 ± 42 million nucleated cells and 30,266 ± 15,850 CTP-Os were implanted in the SR group. Bone formation was robust and not different between treatments. Histologically, both groups demonstrated regeneration of hematopoietic marrow tissue. However, SR sites contained more hematopoietic vascular tissues, less fibrosis, and less residual allograft, particularly in the intramedullary cavity, suggesting a more advanced stage of remodeling (p = 0.04). These data demonstrate excellent overall performance of DS and SR processing methods. Both methods achieve a bone regeneration response that approaches the limits of performance that can be achieved in the CFMD model. Further advancement and comparison of these intraoperative bone marrow cell processing methods will require use of a larger and more biologically compromised defect site to guide the next steps of preclinical development and optimization.

Regeneration of a Tooth in a Tissue-Engineered Mandible After Resection of a Central Giant Cell Tumor. Demonstrating Evidence of Functional Matrix Theory and Ectodermal Origin of Teeth in a Human Model-A Case Report

Central giant cell tumors (CGCTs) are uncommon lesions occurring in the jaw. They are benign but locally destructive osteolytic lesions. They usually occur in pediatric patients 5 to 15 years of age. Multiple noninvasive modalities of treatment (intralesional steroids, interferon, calcitonin, and denosumab) have been described for those lesions, but for those that are refractory to treatment, enucleation and curettage or resection is a curative surgery. This case report describes a pediatric patient who was diagnosed with an aggressive CGCT of the left mandible encompassing the right angle to the condyle. The lesion became refractory to noninvasive treatments and immediate resection and reconstruction was performed using principles of tissue engineering. After 5 years of close observation, the patient showed normal morphology and growth of his mandible, but surprisingly developed a left mandibular third molar (tooth 17) in the site of the mandibular resection and reconstruction. This is the first case report in the literature to show the spontaneous development of teeth in a human reconstructed mandible, contributing evidence toward the functional matrix theory of mandibular growth and ectodermal origin of teeth.

Improvement of Fat Graft Survival with Autologous Bone Marrow Aspirate and Bone Marrow Concentrate: A One-Step Method

BACKGROUND

Stem cells have proven to be beneficial to fat graft survival, but a one-step method of cell-assisted lipotransfer is still missing. In the present work, the authors improved the fat graft survival using bone marrow aspirate and bone marrow concentrate, to ensure that both liposuction and cell-assisted lipotransfer were included in the same procedure.

METHODS

Bone marrow aspirate was collected from the iliac crest of the rabbits. Bone marrow concentrate was obtained using density gradient centrifugation and labeled with PKH26 fluorescent cell linker. Rabbits were divided into three groups: group A, bone marrow aspirate; group B, bone marrow concentrate; and group C, phosphate-buffered saline buffer as a blank control. The implanted mixture contained 1.5 ml of adipose granule and 1 ml of bone marrow aspirate or bone marrow concentrate. The rabbits were subjected to fluorescence imaging in vivo at four time points. Grafts were harvested and analyzed at 4 weeks and 12 weeks after fat grafting.

RESULTS

Bone marrow cell fluorescence signals were observed in the rabbits' injection regions during a follow-up of 12 weeks. The fat grafts of group A and B showed a better weight and volume retention, living quality, adipocyte viability, and angiogenesis after transplantation. The results of living tissue imaging also showed that the implanted bone marrow cells could contribute to fat graft survival by multilineage differentiation and could also contribute to adipogenesis and angiogenesis.

CONCLUSION

Both bone marrow aspirate and bone marrow concentrate improved the survival and angiogenesis of grafted fat tissue.

Resection of an ameloblastoma in a pediatric patient and immediate reconstruction using a combination of tissue engineering and costochondral rib graft: A case report

BACKGROUND AND OVERVIEW

Ameloblastoma is an odontogenic tumor predominantly occurring in patients who are in their 20s and 30s. Approximately 10% to 15% of ameloblastomas occur in patients younger than 18 years. Although it is a benign tumor, an ameloblastoma can have a devastating effect on children both physically and emotionally. The aim of this case report is to demonstrate how tissue engineering and surgical techniques can minimize morbidity and recovery time after extirpation and immediate reconstruction of a mandibular ameloblastoma.

CASE DESCRIPTION

An 11-year-old girl was referred for surgical evaluation of a lesion found on a routine dental radiograph. Resection of a mandibular unicystic ameloblastoma resulted, including immediate reconstruction using a costochondral rib graft, allogeneic bone, bone marrow aspirate concentrate, and recombinant human morphogenetic protein-2. One year postoperatively, the patient had no evidence of recurrence as well as excellent mandibular bone height and width with good facial form. The patient has returned to her daily life without any disabilities or disfigurement.

CONCLUSIONS AND PRACTICAL IMPLICATIONS

Dentists are typically the first health care providers to discover oral pathology in patients. The coordination of care by the dental care providers and the oral and maxillofacial specialist was key to the successful outcome for this patient. With biotechnology and surgical techniques, the dental surgeon can extirpate an ameloblastoma and reconstruct the mandible defect to the ideal shape and size with minimal morbidity and recovery time.

Characterization and cytocompatibility of a new injectable multiphasic bone substitute based on a combination of polysaccharide gel-coated OSPROLIFE(®) HA/TTCP granules and bone marrow concentrate

The purpose of this study was to examine the in vitro cytocompatibility of a novel injectable multiphasic bone substitute (MBS) based on polysaccharide gel-coated OSPROLIFE(®) hydroxyapatite (HA)/tetracalcium phosphate (TTCP) granules combined with bone marrow concentrate (BMC). Polysaccharide gel-coated granules loaded in syringe were combined with BMC diluted in ionic crosslinking solution. The product was then maintained in culture to investigate the cytocompatibility, distribution, and osteogenic differentiation function of cells contained in the BMC. The in vitro cytocompatibility was assessed after 0, 24, and 96 h from the injectable MBS preparation using the LIVE/DEAD(®) staining kit. The results highlighted that cells remained viable after combination with the polysaccharide gel-coated granules; also, viability was maintained over time. The distribution of the cells in the product, observed using confocal microscopy, showed viable cells immersed in the polysaccharide gel formed between the granules after ionic crosslinking. The mesenchymal stromal cells (MSC) contained in the injectable MBS, the basic elements for bone tissue regeneration, were able to differentiate toward osteoblasts, producing an osteogenic matrix as evidenced by alizarin red-s (AR-S) staining. In conclusion, we found that the injectable MBS may have the potential to be used as a bone substitute by applying a "one-step" procedure in bone tissue engineering applications. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 104B: 894-902, 2016.

Embryonic stem cell-derived osteocytes are capable of responding to mechanical oscillatory hydrostatic pressure

Osteoblasts can be derived from embryonic stem cells (ESCs) by a 30 day differentiation process, whereupon cells spontaneously differentiate upon removal of LIF and respond to exogenously added 1,25α(OH)2 vitamin D3 with enhanced matrix mineralization. However, bone is a load-bearing tissue that has to perform under dynamic pressure changes during daily movement, a capacity that is executed by osteocytes. At present, it is unclear whether ESC-derived osteogenic cultures contain osteocytes and whether these are capable of responding to a relevant cyclic hydrostatic compression stimulus. Here, we show that ESC-osteoblastogenesis is followed by the generation of osteocytes and then mechanically load ESC-derived osteogenic cultures in a compression chamber using a cyclic loading protocol. Following mechanical loading of the cells, iNOS mRNA was upregulated 31-fold, which was consistent with a role for iNOS as an immediate early mechanoresponsive gene. Further analysis of matrix and bone-specific genes suggested a cellular response in favor of matrix remodeling. Immediate iNOS upregulation also correlated with a concomitant increase in Ctnnb1 and Tcf7l2 mRNAs along with increased nuclear TCF transcriptional activity, while the mRNA for the repressive Tcf7l1 was downregulated, providing a possible mechanistic explanation for the noted matrix remodeling. We conclude that ESC-derived osteocytes are capable of responding to relevant mechanical cues, at least such that mimic oscillatory compression stress, which not only provides new basic understanding, but also information that likely will be important for their use in cell-based regenerative therapies.

The effect of bone marrow concentrate and hyperbaric oxygen therapy on bone repair

Neoangiogenesis represents an essential part of bone regeneration. Therefore the improvement of neovascularization is the subject of various research approaches. In addition autologous mesenchymal stem cells concentrate in combination with bone substitute materials have been shown to support bone regeneration. In a rabbit model we examined the proposed synergistic effect of hyperbaric oxygen therapy (HBOT) and bone marrow concentrate (BMC) with porous calcium phosphate granules (CPG) on neoangiogenesis and osseous consolidation of a critical- size defect. The animal groups treated with HBOT showed a significantly higher microvessel density (MVD) by immunhistochemistry. Furthermore HBOT groups presented a significantly larger amount of new bone formation histomorphometrically as well as radiologically. We conclude that the increase in perfusion as a result of increased angiogenesis may play a key role in the effects of HBOT and consequently promotes bone healing.

Comparative study of different centrifugation protocols for a density gradient separation media in isolation of osteoprogenitors from bone marrow aspirate

INTRODUCTION

Human bone marrow contains osteoprogenitors capable of differentiating into osteoblasts. Density gradient centrifugation (DGC) is a commonly used method to isolate osteoprogenitors from bone marrow. Numerous studies used different dilution and centrifugation protocols, which might affect cell yields and quality. Moreover, the relative isolation efficiencies of the different separation protocols have not been investigated. This study compares the enrichment efficacy of the two different centrifugation protocols for a commonly used DGC media in isolation of osteoprogenitors.

MATERIAL AND METHOD

Bone marrow was aspirated from human anterior iliac crests. Osteoprogenitors are isolated with Ficoll DGC media. A centrifugal force of 400 g and 1:1 dilution was compared with the centrifugal force of 1000 g after three dilution times with a buffer.

RESULTS

The average numbers of isolated cells were significantly higher when using lower centrifugal force with 1:1 dilution, however, there was no detectable difference between Colony-forming unit-fibroblast (CFU-F) forming capacity, STRO-1 positivity, osteogenic differentiation or mineralization abilities between protocols.

CONCLUSION

Both protocols could isolate competent and functional osteoprogenitors, while a lower centrifugal force (400 g) with 1:1 dilution produced recovery of more osteoprogenitors.

Concise review: bridging the gap: bone regeneration using skeletal stem cell-based strategies - where are we now?

Skeletal stem cells confer to bone its innate capacity for regeneration and repair. Bone regeneration strategies seek to harness and enhance this regenerative capacity for the replacement of tissue damaged or lost through congenital defects, trauma, functional/esthetic problems, and a broad range of diseases associated with an increasingly aged population. This review describes the state of the field and current steps to translate and apply skeletal stem cell biology in the clinic and the problems therein. Challenges are described along with key strategies including the isolation and ex vivo expansion of multipotential populations, the targeting/delivery of regenerative populations to sites of repair, and their differentiation toward bone lineages. Finally, preclinical models of bone repair are discussed along with their implications for clinical translation and the opportunities to harness that knowledge for musculoskeletal regeneration.

Multipotential stromal cell abundance in cellular bone allograft: comparison with fresh age-matched iliac crest bone and bone marrow aspirate

AIM

To enumerate and characterize multipotential stromal cells (MSCs) in a cellular bone allograft and compare with fresh age-matched iliac crest bone and bone marrow (BM) aspirate.

MATERIALS & METHODS

MSC characterization used functional assays, confocal/scanning electron microscopy and whole-genome microarrays. Resident MSCs were enumerated by flow cytometry following enzymatic extraction.

RESULTS

Allograft material contained live osteocytes and proliferative bone-lining cells defined as MSCs by phenotypic and functional capacities. Without cultivation/expansion, the allograft displayed an 'osteoinductive' molecular signature and the presence of CD45(-)CD271(+)CD73(+)CD90(+)CD105(+) MSCs; with a purity over 100-fold that of iliac crest bone. In comparison with BM, MSC numbers enzymatically released from 1 g of cellular allograft were equivalent to approximately 45 ml of BM aspirate.

CONCLUSION

Cellular allograft bone represents a unique nonimmune material rich in MSCs and osteocytes. This osteoinductive graft represents an attractive alternative to autograft bone or composite/synthetic grafts in orthopedics and broader regenerative medicine settings.

Characterization of DC-STAMP+ Cells in Human Bone Marrow

Osteoclasts (OC), specialized cells derived from monocytes, maintain skeletal homeostasis under normal conditions but degrade bone in patients with rheumatoid (RA) and psoriatic arthritis (PsA). Monocytes initially develop in the bone marrow (BM), circulate in peripheral blood, and differentiate into distinct cell types with diverse functions. Imaging studies in (RA) patients and murine arthritis models demonstrate that bone marrow edema detected on MRI is the result of enhanced myelopoiesis which precedes the development of bone erosions detected on plain radiographs several years later. A major knowledge gap, however, is whether OC develop in the BM and circulate to the joint and if the differentiation to OC takes place in the joint space in response to differentiation signals such as RANKL and TNF. We have previously demonstrated that osteoclast precursors (OCP) are increased in the circulaton of patients with RA and PsA. We showed that DC-STAMP (Dendritic Cell-Specific Transmembrane protein), a 7-pass transmembrane protein expressed on the surface of monocytes, is essential for cell-to-cell fusion during OC differentiation and is a valid biomarker of OCP. Herein, we examined OCP in human bone marrow and identified one novel subset of DC-STAMP+CD45intermediate monocytes which was absent in the blood. We also found that OCPs reside in human BM with a higher frequency than in the peripheral blood. These findings support the notion that the BM is a major reservoir of circulating OCPs. In addition, we demonstrated that a higher frequency of DC-STAMP+ cells in the BM have detectable intracellular IFN-γ, IL-4 and IL-17A than DC-STAMP+ cells circulating in the peripheral blood. Finally, the frequency of DC-STAMP+ monocytes and T cells is signficantly higher in PsA BM compared to healthy controls, suggesting an enhanced myelopoiesis is a central event in inflammatory arthritis.