The effect of the release behavior of simvastatin from different PLGA particles on bone regeneration in vitro and in vivo : Comparison of simvastatin-loaded PLGA microspheres and nanospheres

Simvastatin-Loaded Polymeric Nanoparticles: Targeting Inflammatory Macrophages for Local Adipose Tissue Browning in Obesity Treatment

Obesity is defined as chronic, low-grade inflammation within specific tissues. Given the escalating prevalence of obesity among individuals of all ages, obesity has reached epidemic proportions, posing an important public health challenge. Despite significant advancements in treating obesity, conventional approaches remain largely ineffective or involve severe side effects, thus underscoring the pressing need to explore and develop treatment approaches. Targeted and local immunomodulation using nanoparticles (NPs) can influence fat production and utilization processes. Statins, known for their anti-inflammatory properties, show the potential for mitigating obesity-related inflammation. A localized delivery option offers several advantages over oral and parenteral delivery methods. Here, we developed simvastatin (Sim) encapsulated within PLGA NPs (Sim-NP) for localized delivery of Sim to adipose tissues (ATs) for immunomodulation to treat obesity. In vitro experiments revealed the strong anti-inflammatory effects of Sim-NPs, which resulted in enhanced modulation of macrophage (MΦ) polarization and induction of AT browning. We then extended our investigation to an in vivo mouse model of high-fat-diet (HFD)-induced obesity. Sim-NP administration led to the controlled release of Sim within AT, directly impacting MΦ activity and inducing AT browning while inducing weight loss. Our findings demonstrated that Sim-NP administration effectively inhibited the progression of obesity-related inflammation, controlled white fat production, and enhanced AT modulation. These results highlight the potential of Sim-NP as a potent nanotherapy for treating obesity by modulating the immune system.

Design of gelatin cryogel scaffolds with the ability to release simvastatin for potential bone tissue engineering applications

Tissue engineering aims to improve or restore damaged tissues by using scaffolds, cells and bioactive agents. In tissue engineering, one of the most important concepts is the scaffold because it has a key role in keeping up and promoting the growth of the cells. It is also desirable to be able to load these scaffolds with drugs that induce tissue regeneration/formation. Based on this, in our study, gelatin cryogel scaffolds were developed for potential bone tissue engineering applications and simvastatin loading and release studies were performed. Simvastatin is lipoliphic in nature and this form is called inactive simvastatin (SV). It is modified to be in hydrophilic form and converted to the active form (SVA). For our study's drug loading and release process, simvastatin was used in both inactive and active forms. The blank cryogels and drug-loaded cryogels were prepared at different glutaraldehyde concentrations (1, 2, and 3%). The effect of the crosslinking agent and the amount of drug loaded were discussed with morphological and physicochemical analysis. As the glutaraldehyde concentration increased gradually, the pores size of the cryogels decreased and the swelling ratio decreased. For the release profile of simvastatin in both forms, we can say that it depended on the form (lipophilic and hydrophilic) of the loaded simvastatin.

Fabrication and Characterization of Antibody-Loaded Cationic Porous PLGA Microparticles for Sustained Antibody Release

Poly lactic-co-glycolic acid (PLGA) microparticles have been formulated to allow the sustained release of numerous drugs, including antibodies. It is well-known that antibodies are susceptible to chemical and physical stress; therefore, it is necessary to be loaded on PLGA microparticles under mild conditions. In the present study, we constructed cationic porous PLGA microparticles that could be electrostatically adsorbed with infliximab as a model antibody. Cationic porous PLGA microparticles were prepared using the double emulsion method by adding polyethyleneimine and ammonium bicarbonate. After antibody loading, surface pores closure was achieved by mild heating. The size of the optimized formulation was approximately 5 μm, exhibiting a positive charge. The loaded antibody was gradually released from the formulation over 56 days. Based on a tumor necrosis factor (TNF)-α inhibition assay, the released infliximab maintained its pharmacological activity. Collectively, we successfully loaded antibodies into PLGA microparticles while maintaining activity and demonstrating long-acting properties.

In Vitro Cell Behavior and Antibiotic Activity under Sustained Release of Doxycycline-Loaded Poly(lactic-co-glycolic acid) Microspheres

The state-of-the-art sustained drug delivery systems are related to features to improve pharmacological transport through a controlled ratio between drug release and the desired therapeutic effect. Microspheres of biodegradable polymers, such as poly(lactic-co-glycolic acid) (PLGA), play an important role in these approaches, directing the release in a specific region of interest. In this way, the encapsulation of doxycycline (DOX) as a microbial agent turns the PLGA microspheres into a potential device for the treatment of topic oral diseases. Thus, this work aimed to produce DOX-loaded PLGA microspheres and see how they interfered with mesenchymal stem cell viability and in the sustained release in antimicrobial assays. Scanning electron microscopy showed the spherical microstructured pattern, revealing assorted sized distribution, with major diameters ranging 1–3 µm. The encapsulation efficiency presented a mean of 80% in both methods to obtain the microspheres (sonication and magnetic rotation). The DOX release test revealed a gradual and continuous profile of 30–40% between 120 and 168 h. Mesenchymal stem cells cultured in PLGA with or without DOX at several concentrations revealed no effect on the cell metabolic activity. Striking morphology changes were observed by confocal microscopy after 1 to 3 days under culture. The live/dead assay indicated that when microsphere densities were increased (from 10 to 100 µg/mL) cultured cells presented an internalized pattern of microspheres in both groups of PLGA containing DOX or not, while slight cell death signals were identified nearby microsphere clusters. Microbiological assays performed by the agar diffusion test pointed out that an inhibition zone was identified in Staphylococcus aureus (S. aureus) cultures at earlier times of DOX release. Despite the well-known use of PLGA as a drug delivery vehicle, when synthesized with DOX, it presents both characteristics of the desired treatment to prevent healthy tissue damage while avoiding bacterial growth in a microenvironment with anatomical features, such as grooves, projections, and other tough conditions that favor the development of oral diseases.

Amphiphilic Crosslinked Four-Armed Poly(lactic-co-glycolide) Electrospun Membranes for Enhancing Cell Adhesion

Common poly(lactide-co-glycolide) (i-PLGA) has emerged as a biodegradable and biocompatible material in tissue engineering. However, the poor hydrophilicity and elasticity of i-PLGA lead to its limited application in tissue engineering. To this end, an amphiphilic crosslinked four-armed poly(lactic-co-glycolide) was prepared. First, four-armed PLGA (4A-PLGA) was synthesized by polymerizing l-lactide (LA) and glycolide (GA) with pentaerythritol as the initiator. Then, the hydrophilic polymer poly(glutamate propylene ester) (PGPE) was prepared through the esterification of glutamic acid and 1,2-propanediol. The hydrophilic 4A-PLGA-PGPE was finally synthesized through the condensation reaction of 4A-PLGA and PGPE with the aid of triphosgene. 4A-PLGA-PGPE was then used to prepare amphiphilic membranes by electrospinning. It was demonstrated that the mechanical properties and biocompatibility of 4A-PLGA were improved after the introduction of PGPE. Furthermore, the introduction of glutamate improved the hydrophilicity of 4A-PLGA, thus effectively promoting cell entry and adhesion, which makes the electrospun 4A-PLGA-PGPE membranes promising for tissue engineering.

Fabrication of Porous Crystalline PLGA-PEG Induced by Swelling during the Recrystallization Annealing Process

Poly(lactide-co-glycolide) (PLGA) has been widely used as a scaffold material for tissue engineering owing to its biocompatibility, biodegradability, and biosafety. However, lactic acid (LA) produced during PLGA degradation is prone to inflammation, which is a shortcoming that must be avoided. To this end, crystalline PLGA-PEG was synthesized here for the first time. To make the crystalline PLGA-PEG more suitable for tissue engineering, porous crystalline PLGA-PEG was prepared via the swelling behavior during recrystallization annealing. The structure and properties of the porous crystalline PLGA-PEG were confirmed by SEM, POM, and XRD. Furthermore, the swelling behavior of different PEG molecular weights was studied, and the cell viability test and alkaline phosphatase activity test showed that PLGA-PEG has good biocompatibility. Such a porous crystalline PLGA-PEG will make PLGA have a broader application prospect in bone repair.

Evaluation of the efficiency of simvastatin loaded PLGA nanoparticles against acute paraquat-intoxicated rats

Here, we reported a novel nanotherapeutic platform for paraquat (PQ)-induced acute lung injury in animal models using simvastatin (SV) loaded into Poly (lactic-co-glycolic acid) (PLGA) nanoparticles (NPs). In this way, Male Wistar rats orally received PQ (120 mg / kg) plus saline, SV (20 mg / kg) or PLGA-SV NPs containing 5, 10 and 20 mg SV/ kg. The levels of TNFα, IL-1β, IL-6 and glutathione content were evaluated. In addition, the pathological changes in the lung were monitored. Our results indicated that PQ (120 mg/kg) significantly reduced the body weight of rats compared to the control group. The most decrease in the level of inflammatory cytokines, bleeding, alveolar destruction as well as lymphocytic infiltration in the lung was observed at group treated with PLGA-SV NPs (10 mg). Free SV (20 mg) as well as PLGA-SV NPs (5 mg) modulated the inflammatory factors and glutathione content, however, they could not prevent tissue damage of PQ. Interestingly, PLGA-SV NPs (20 mg) could not improve the PQ- induced pulmonary damage. In conclusion, PLGA-SV NPs (10 mg) attenuated PQ-induced lung injury. The underlying mechanism may be relevant to increasing glutathione levels and inhibition of the production of inflammatory factors.

Recent advances in PLGA-based biomaterials for bone tissue regeneration

Bone regeneration is an interdisciplinary complex lesson, including but not limited to materials science, biomechanics, immunology, and biology. Having witnessed impressive progress in the past decades in the development of bone substitutes; however, it must be said that the most suitable biomaterial for bone regeneration remains an area of intense debate. Since its discovery, poly (lactic-co-glycolic acid) (PLGA) has been widely used in bone tissue engineering due to its good biocompatibility and adjustable biodegradability. This review systematically covers the past and the most recent advances in developing PLGA-based bone regeneration materials. Taking the different application forms of PLGA-based materials as the starting point, we describe each form's specific application and its corresponding advantages and disadvantages with many examples. We focus on the progress of electrospun nanofibrous scaffolds, three-dimensional (3D) printed scaffolds, microspheres/nanoparticles, hydrogels, multiphasic scaffolds, and stents prepared by other traditional and emerging methods. Finally, we briefly discuss the current limitations and future directions of PLGA-based bone repair materials. STATEMENT OF SIGNIFICANCE: As a key synthetic biopolymer in bone tissue engineering application, the progress of PLGA-based bone substitute is impressive. In this review, we summarized the past and the most recent advances in the development of PLGA-based bone regeneration materials. According to the typical application forms and corresponding crafts of PLGA-based substitutes, we described the development of electrospinning nanofibrous scaffolds, 3D printed scaffolds, microspheres/nanoparticles, hydrogels, multiphasic scaffolds and scaffolds fabricated by other manufacturing process. Finally, we briefly discussed the current limitations and proposed the newly strategy for the design and fabrication of PLGA-based bone materials or devices.

Simvastatin-Incorporated Drug Delivery Systems for Bone Regeneration

Local drug delivery systems composed of biomaterials and osteogenic substances provide promising strategies for the reconstruction of large bone defects. In recent years, simvastatin has been studied extensively for its pleiotropic effects other than lowering of cholesterol, including its ability to induce osteogenesis and angiogenesis. Accordingly, several studies of simvastatin incorporated drug delivery systems have been performed to demonstrate the feasibility of such systems in enhancing bone regeneration. Therefore, this review explores the molecular mechanisms by which simvastatin affects bone metabolism and angiogenesis. The simvastatin concentrations that promote osteogenic differentiation are analyzed. Furthermore, we summarize and discuss a variety of simvastatin-loaded drug delivery systems that use different loading methods and materials. Finally, current shortcomings of and future development directions for simvastatin-loaded drug delivery systems are summarized. This review provides various advanced design strategies for simvastatin-incorporated drug delivery systems that can enhance bone regeneration.

Progress and Prospects of Polymer-Based Drug Delivery Systems for Bone Tissue Regeneration

Despite the high regenerative capacity of bone tissue, there are some cases where bone repair is insufficient for a complete functional and structural recovery after damage. Current surgical techniques utilize natural and synthetic bone grafts for bone healing, as well as collagen sponges loaded with drugs. However, there are certain disadvantages associated with these techniques in clinical usage. To improve the therapeutic efficacy of bone tissue regeneration, a number of drug delivery systems based on biodegradable natural and synthetic polymers were developed and examined in in vitro and in vivo studies. Recent studies have demonstrated that biodegradable polymers play a key role in the development of innovative drug delivery systems and tissue engineered constructs, which improve the treatment and regeneration of damaged bone tissue. In this review, we discuss the most recent advances in the field of polymer-based drug delivery systems for the promotion of bone tissue regeneration and the physical-chemical modifications of polymers for controlled and sustained release of one or more drugs. In addition, special attention is given to recent developments on polymer nano- and microparticle-based drug delivery systems for bone regeneration.

Assessment of Residual Solvent and Drug in PLGA Microspheres by Derivative Thermogravimetry

Thermogravimetry does not give specific information on residual organic solvents in polymeric matrices unless it is hyphenated with the so-called evolved gas analysis. The purpose of this study was to apply, for the first time, derivative thermogravimetry (DTG) to characterize a residual solvent and a drug in poly-d,l-lactide-co-glycolide (PLGA) microspheres. Ethyl formate, an ICH class 3 solvent, was used to encapsulate progesterone into microspheres. DTG provided a distinct peak, displaying the onset and end temperatures at which ethyl formate started to evolve from to where it completely escaped out of the microspheres. DTG also gave the area and height of the solvent peak, as well as the temperature of the highest mass change rate of the microspheres. These derivative parameters allowed for the measurement of the amount of residual ethyl formate in the microspheres. Interestingly, progesterone affected not only the residual solvent amount but also these derivative parameters. Another intriguing finding was that there was a linear relationship between progesterone content and the peak height of ethyl formate. The residual solvent data calculated by DTG were quite comparable to those measured by gas chromatography. In summary, DTG could be an efficient and practical quality control tool to evaluate residual solvents and drugs in various polymeric matrices.

Comparison of chitosan microsphere versus O-carboxymethyl chitosan microsphere for drug delivery systems

The development of controlled drug delivery systems for bone regeneration, especially microspheres, has become a research hotspot in recent years. Chitosan and its derivative O-carboxymethyl chitosan have been considered to be an effective way for controlled drug delivery due to their nontoxicity and biodegradability. Currently, most of the studies have researched on synthesizing and characterizing chitosan and O-carboxymethyl chitosan. However, few studies have focused on the differences between chitosan microspheres and O-carboxymethyl chitosan microspheres directly. In this study, chitosan and O-carboxymethyl chitosan microspheres were developed by water-in-oil emulsification cross-linking method using vanillin as the cross-linking agent, and then their physicochemical properties were evaluated by Fourier transform infrared spectroscopy, scanning electron microscopy, and in vitro release testing. The results showed that O-carboxymethyl chitosan was successfully modified by adding carboxymethyl group at the chitosan C6 position.The particle size of chitosan microspheres (50–90 µm) was significantly larger than that of O-carboxymethyl chitosan microspheres (10–50 µm), and the drug release profile of O-carboxymethyl chitosan microspheres showed larger initial burst release within the first day and sustained release at the fourth day, while chitosan microspheres showed sustained release at the seventh day. In addition, Cell Counting Kit-8 assay showed that MC3T3-E1 proliferated well and highly expressed the alkaline phosphatase marker protein on both chitosan and O-carboxymethyl chitosan microspheres. Overall, both chitosan and O-carboxymethyl chitosan microspheres showed good biocompatibility, and chitosan microspheres were superior to O-carboxymethyl chitosan microspheres. Moreover, the different drug release rates suggest that chitosan and O-carboxymethyl chitosan microspheres have the potential to be used for the repair of different bone defects.

Poly(anhydride) nanoparticles act as effective adjuvants to elicit a persistent immune response

This research shows that p-OVA nanoparticles composed of poly(anhydride) and OVA have a strong ability to induce an OVA-specific immune response.