Improving Ibuprofen solubility by surfactant-facilitated self-assembly into mixed micelles

Enhanced Solubility of Ibuprofen by Complexation with β-Cyclodextrin and Citric Acid

The ability of β-CD to form inclusion complexes with ibuprofen (IBU) and at the same time to make a two-phase system with citric acid was explored in the present study for achieving improved solubility and dissolution rate of IBU. Mechanical milling as well as mechanical milling combined with thermal annealing of the powder mixtures were applied as synthetic methods. Solubility and dissolution kinetics of the complexes were studied in compliance with European Pharmacopoeia (ICH Q4B). β-CD and citric acid (CA) molecules were shown to interact by both ball milling (BM), thermal annealing, as well as BM with subsequent annealing. Complexes were also formed by milling the three compounds (β-CD, CA and IBU) simultaneously, as well as by a consecutive first including IBU into β-CD and then binding the formed β-CD/IBU inclusion complex with CA. As a result, ternary β-CD/IBU/CA complex formed by initial incorporation of ibuprofen into β-CD, followed by successive formation of a two-phase mixture with CA, exhibited notably improved dissolution kinetics compared to the pure ibuprofen and slightly better compared to the binary β-CD/IBU system. Although the addition of CA to β-CD/IBU does not significantly increase the solubility rate of IBU, it must be considered that the amount of β-CD is significantly less in the ternary complex compared to the binary β-CD/IBU.

Preparation of pH-responsive oxidized regenerated cellulose hydrogels compounded with nano-ZnO/chitosan/aminocyclodextrin ibuprofen complex for wound dressing

Recently, using oxidized regenerated cellulose (ORC) to build a hydrogel system on promoting healing in wounds has a fast-growing market. However, it remains a challenge to improve the degree of oxidation of regenerated cellulose (RC) and to prepare matrices that are uniquely responsive to the wound environment. Herein, highly oxidized aldehyde-based cellulose from porous RC was prepared by NaBH4-HCl swelling and then NaIO4 oxidation pathway. Chitosan (CS), ethylenediamine-cyclodextrin (EDA-CD) along with ORC have been used to construct hydrogel matrices that are pH-responsive and capable of controlled drug release for use as future wound dressings. And zinc oxide nanoparticles (ZnO NPs) with antimicrobial effect and ibuprofen (IBU) with analgesic effect were piggybacked into the hydrogel system. XRD was used to study the presence of ZnO. SEM was used to observe the surface structure of the prepared hydrogel. TEM was used to observe the particle size of the ZnO NPs. Meanwhile, the oxidation conditions of the ORC were explored. Furthermore, the mechanical, swelling, water retention, cytotoxicity, bacterial inhibition properties and treatment effect, which are closely related to the application of wound dressing, were carefully researched. The unique characteristics of prepared hydrogel, including pH-responsive degradability and sustained release properties of IBU, were also investigated.

Molecular insights into the aggregation and solubilizing behavior of biocompatible amphiphiles Gelucire® 48/16 and Tetronics® 1304 in aqueous media

A comparative analysis of the micellar and solubilizing properties of two polyethylene glycol (PEG)-based amphiphilic biocompatible excipients: Gelucire® 48/16 (Ge 48/16) and Tetronics® 1304 (T1304), in the presence and absence of salt, was conducted. As there is a dearth of research in this area, the study aims to shed light on the behavior of these two nonionic surfactants and their potential as nanocarriers for solubilizing pharmaceuticals. Various techniques such as cloud point (CP), dynamic light scattering (DLS), small-angle neutron scattering (SANS), Fourier transform infrared spectroscopy (FT-IR), UV spectrophotometry, and high-performance liquid chromatography (HPLC) were employed. The solubility of quercetin (QCT), a flavonoid with anti-inflammatory, antioxidant, and anti-cancer properties, was evaluated and the interaction between QCT and the micellar system was examined. The analysis revealed the occurrence of strong interactions between QCT and surfactant molecules, resulting in enhanced solubility. It was observed that the micellar size and solubilizing ability were significantly improved in the presence of salt, while the CP decreased. Ge 48/16 exhibited superior performance, with a remarkable increase in the solubility of QCT in the presence of salt, suggesting its potential as an effective nanocarrier for a range of pharmaceutics, and yielding better therapeutic outcomes.

Multifunctional Surface Modification of PDMS for Antibacterial Contact Killing and Drug-Delivery of Polar, Nonpolar, and Amphiphilic Drugs

Medical device-associated infections pose major clinical challenges that emphasize the need for improved anti-infective biomaterials. Polydimethylsiloxane (PDMS), a frequently used elastomeric biomaterial in medical devices, is inherently prone to bacterial attachment and associated infection formation. Here, PDMS surface modification strategy is presented consisting of a cross-linked lyotropic liquid crystal hydrogel microparticle coating with antibacterial functionality. The microparticle coating composed of cross-linked triblock copolymers (diacrylated Pluronic F127) was deposited on PDMS by physical immobilization via interpenetrating polymer network formation. The formed coating served as a substrate for covalent immobilization of a potent antimicrobial peptide (AMP), RRPRPRPRPWWWW-NH2, yielding high contact-killing antibacterial effect against Staphylococcus epidermidis and Staphylococcus aureus. Additionally, the coating was assessed for its ability to selectively host polar, amphiphilic, and nonpolar drugs, resulting in sustained release profiles. The results of this study put forward a versatile PDMS modification strategy for both contact-killing antibacterial surface properties and drug-delivery capabilities, offering a solution for medical device-associated infection prevention.

Insight of the various in silico screening techniques developed for assortment of cocrystal formers and their thermodynamic characterization

Most of the widely used drugs have problems associated with their oral bioavailability either due to their poor aqueous solubility or due to their poor permeability. Co-crystallization is an efficient and economically feasible approach that offers a great opportunity for improvement in physicochemical properties such as solubility, stability, and bioavailability of such type of therapeutic agent. Selection of the best co-former plays a major role in co-crystallization. Various approaches have been developed for the selection of suitable co-formers with API. In recent years in silico screening, a computational tool paying more attention for screening of co-formers has been developed. Numerous approaches can be used for in silico screening such as the Autodocking tool, COSMORS, COSMOTHERM, etc. Autodocking can predict several numbers of co-former effectively screened in silico method to identify a suitable co-former with an API. Prediction of solubility and dissolution is also important for the development of co-crystal. In this review, we discuss in silico screening of coformer and thermodynamic approaches to determine the dissolution and solubility of co-crystal specially with reference to the drugs belonging to BCS class II group.

Xylitol as a Hydrophilization Moiety for a Biocatalytically Synthesized Ibuprofen Prodrug

Biocatalyzed synthesis can be exploited to produce high-value products, such as prodrugs. The replacement of chemical approaches with biocatalytic processes is advantageous in terms of environmental prevention, embracing the principles of green chemistry. In this work, we propose the covalent attachment of xylitol to ibuprofen to produce an IBU-xylitol ester prodrug. Xylitol was chosen as a hydrophilizer for the final prodrug, enhancing the water solubility of ibuprofen. Ibuprofen is a nonsteroidal anti-inflammatory drug (NSAID) extensively used as an analgesic, anti-inflammatory, and antipyretic. Despite being the third-most-prescribed medicine in the world, the aqueous solubility of ibuprofen is just 21 mg/L. This poor water solubility greatly limits the bioavailability of ibuprofen. We aimed to functionalize ibuprofen with xylitol using the reusable immobilized N435 biocatalyst. Instead of a biphasic media, we proposed a monophasic reaction environment. The characterization of the IBU-xylitol ester was performed by ¹H, ¹³C-NMR, DEPT, COSY, HMQC, HMBC, FTIR, and MS spectroscopy. Preliminary in vitro tests showed that this enzymatically synthesized prodrug of ibuprofen reduced the expression of the interleukin 8 genes in human bronchial epithelial cells (IB3-1) from cystic fibrosis (CF) patients.

Selective Crystallization of d-Mannitol Polymorphs Using Surfactant Self-Assembly

Selective crystallization of polymorphs is highly sought after in industrial practice. Yet, state-of-the-art techniques either use laboriously engineered solid surfaces or strenuously prepared heteronucleants. We propose an approach where surfactants in solution self-assemble effortlessly into mesoscopic structures dictating the polymorphic outcome of the target solute. Sodium dodecyl sulfate (SDS) surfactant is used as a tailored additive to crystallize different polymorphic forms of a model active pharmaceutical ingredient, d-mannitol. Different mesoscopic phases of SDS template particular polymorphs: packed monolayers, micelles, and crystals favored the β, α, and δ forms of d-mannitol, respectively. A synergistic effect of topological templating and molecular interactions is proposed as the rationale behind the observed selective crystallization of polymorphs. This crystal engineering technique suggests that surfactant self-assemblies can be used as tailored templates for polymorphic control.

Development of omega-3 loxoprofen-loaded nanoemulsion to limit the side effect associated with NSAIDs in treatment of tooth pain

The majority of newly developed drugs need to be incorporated with delivery systems to maximize their effect and minimize side effects. Nanoemulsions (NEs) are one type of delivery system that helps to improve the solubility and dissolution of drugs, attempting to enhance their bioavailability and onset of action. The objective of this investigation was to develop an omega-3 oil-based NE loaded with loxoprofen (LXP) to enhance its dissolution, in vitro release, and mucosal penetration and decrease its mucosal ulcerative effects when applied in an oral treatment. LXP-loaded NEs were formulated with varying levels of omega-3 oil (10–30%), surfactant polyoxyethylene-C21-ethers (laureth-21) (40–60%), and co-surfactant polyethylene glycol-40 hydrogenated castor oil (HCO-40) (30–50%) using an extreme vertices mixture design. The developed NEs were characterized for globule size and drug loading capacity. The optimal formulation was tested for in vitro drug release, ex vivo permeation, and ulcer index value. The developed NE acquired a globule size ranging 71–195 nm and drug loading capacity of 43–87%. Considering the results of the in vitro release study, the optimized NE formulation achieved 2.45-fold and 2-fold increases in drug permeation across tested mucosa compared to a marketed tablet and drug aqueous dispersion, respectively. Moreover, the optimum NE exhibited the best ulcer index in comparison to drug aqueous suspension and different formulations when tested in rats. Overall, this research highlights the capacity of NEs to deliver LXP with enhanced solubility, drug release, and permeation while effectively protecting the application site from side effects of the model drug.

Biocatalytic Approach for Direct Esterification of Ibuprofen with Sorbitol in Biphasic Media

Ibuprofen is a nonsteroidal anti-inflammatory drug (NSAID) introduced in the 1960s and widely used as an analgesic, anti-inflammatory, and antipyretic. In its acid form, the solubility of 21 mg/L greatly limits its bioavailability. Since the bioavailability of a drug product plays a critical role in the design of oral administration dosage, this study investigated the enzymatic esterification of ibuprofen as a strategy for hydrophilization. This work proposes an enzymatic strategy for the covalent attack of highly hydrophilic molecules using acidic functions of commercially available bioactive compounds. The poorly water-soluble drug ibuprofen was esterified in a hexane/water biphasic system by direct esterification with sorbitol using the cheap biocatalyst porcine pancreas lipase (PPL), which demonstrated itself to be a suitable enzyme for the effective production of the IBU-sorbitol ester. This work reports the optimization of the esterification reaction.

Investigation of design space for freeze-drying injectable ibuprofen using response surface methodology

This study explores the use of a statistical model to build a design space for freeze-drying two formulations with ibuprofen. A 2 × 3 factorial experimental design was used to evaluate independent variables (filling volume and annealing time) and responses as residual moisture content, specific surface area and reconstitution time. A statistical model and response surface plots were generated to define the interactions among the selected variables. The models constructed for both formulations suggest that 1 mL of filled volume and no annealing should be used to achieve optimal residual moisture content, specific surface area and reconstitution time. The proposed models were validated with additional experiments, in which the responses observed were mainly in close agreement with the predicted ones. Additionally, the established models demonstrate the reliability of the evaluation procedure in predicting the selected responses.

Formulation of solid dispersion to improve dissolution and oral bioavailability of poorly soluble dexibuprofen

Dexibuprofen (DEXI) belongs to BCS class II drug with poor aqueous solubility resulting in poor bioavailability. To enhance solubility and bioavailability of DEXI, DEXI-loaded solid dispersion (SD) was formulated. DEXI-SDs were prepared by melting method and solvent evaporation method. Amphipathic polymer poloxamer 407 (pol 407) was selected based on solubility and dissolution tests. The ratio of DEXI:pol 407 was optimized as 1:2. The physicochemical properties, dissolution, and oral bioavailability of SD3 and SD6 were evaluated to compare preparation methods. The dissolution rate of DEXI from SD formulations was higher at pH 6.8 and pH 7.2 than at pH 1.2. Following oral administration in rats, the C_max and AUC_last of SD3 and SD6 formulations were significantly higher compared with raw DEXI. In addition, the SD6 formulation showed increased C_max and AUC_last by 1.34- and 1.33-fold, compared with those of SD3 formulation, respectively. These results demonstrated that SD formulation has excellent potential as a formulation for poorly soluble drug DEXI.

Fabrication of a narrow size nano curcuminoid emulsion by combining phase inversion temperature and ultrasonication: preparation and bioactivity

A novel method to prepare narrow size nano curcuminoids from Curcuma longa.

Influences of added surfactants on the water solubility and antibacterial activity of rosemary extract

Rosemary extract (RE) has significant antioxidant and antibacterial properties; however, the application of RE to areas with an aqueous solution is limited due to its poor solubility. There is a need for research focused on finding a method to improve water solubility for incorporating RE into aqueous systems, such as food and cosmetic. Therefore, in this study, the micellar solubilization of RE is conducted using four types of surfactants (Tween 20, polyglyceryl-10-laurate, polyglyceryl-10-myristate, and polyglyceryl-10-monooleate) to increase the water solubility of RE and the effects of various surfactant types and concentration on solubility were investigated. Antibacterial activities of the mixture solutions containing RE and surfactants were also examined. The water solubility of RE significantly improved when surfactants were added into the RE solution and especially in polyglyceryl-10-monooleate, with the longest tail, was the most effective for increasing solubility. In terms of the antibacterial effect on Bacillus subtilis, it was observed that a relatively lower concentration of surfactants was effective. The results of this study provide useful information for the development of a new RE-loaded delivery system for food and cosmetic application.

Studying the toxicity of SLEnS-LAS micelles to collembolans and plants: Influence of ethylene oxide units in the head groups

Mixed micelles of linear alkylbenzene sulfonic acid (LAS) and ether sulfate-based surfactants (SLE_nS) can be added in household products and cleaning agents. SLE_nS with higher ethylene oxide (EO) units in the head groups have economic and environmental advantages. This work aims to assess the influence of the number of EO units in the ecotoxicity of seven variants of SLE_nS-LAS micelles (0-50 EO units) in soils. Ecotoxicological tests were carried out to assess emergence and growth of four plants species and reproduction of collembolans. Most of the variants inhibited plants growth at the highest concentrations (1237.5 μg SLE_nS kg^-1 of soil_dw). For reproduction, lower number of EO units resulted in EC₅₀ from 924.2 (95 % CL: 760.7-1063.4) to 963.2 (95 % CL: 676.9-1249.6) μg SLE_nS kg^-1 of soil_dw, whereas for higher number of EO units (50 and 30) no inhibition was reported. Based on these results, we suggest that a higher number of EO units contribute to less hazardous formulations, confirming that different designs of surfactants may contribute to changes in the responses of terrestrial organisms. Therefore, we demonstrate that standardized ecotoxicological assays may contribute to more sustainable and effective formulations, when used upstream, prior to manufacture and marketing.

A Novel Approach to Optimize Hot Melt Impregnation in Terms of Amorphization Efficiency

In this study, an innovative methodology to optimize amorphization during the hot melt impregnation (HMI) process was proposed. The novelty of this report revolves around the use of thermal analysis in combination with design of experiments (DoEs) to reduce residual crystallinity during the HMI process. As a model formulation, a mixture of ibuprofen (IBU) and Neusilin was used. The main aim of the study was to identify the critical process parameters of HMI and determine their optimal values to assure a robust impregnation process and possibly the highest possible amorphization rate of IBU. In order to realize this, a DoE approach was proposed based on a face-centered composite design involving three factors. The IBU/Neusilin ratio, the feeding rate, and the screw speed were considered as variables, while the residual crystallinity level of IBU, determined using differential scanning calorimetry (DSC), was measured as the response. Additionally, the stability of IBU under HMI was analyzed using high-performance liquid chromatography to estimate the extent of potential degradation. In order to verify the correctness of the DoE model, tested extrudates were manufactured by HMI and the obtained extrudates were thoroughly examined using scanning electron micrography, X-ray powder diffraction, and DSC.

The Role of Functional Excipients in Solid Oral Dosage Forms to Overcome Poor Drug Dissolution and Bioavailability

Many active pharmaceutical ingredients (APIs) exhibit poor solubility and low dissolution rates in aqueous environments such as the luminal fluids of the gastrointestinal tract. The oral bioavailability of these compounds is usually very low as a result of their poor solubility properties. In order to improve the bioavailability of these poorly soluble drugs, formulation strategies have been applied as a means to improve their aqueous solubility and dissolution rates. With respect to formulation approaches, excipients can be incorporated in the formulation to assist in the dissolution process of the drug, or specialized dosage forms can be formulated that improve dissolution rate through various mechanisms. This paper provides an overview of selected excipients (e.g., alkalinizing agents, surfactants and sugars) that can be used in formulations to increase the dissolution rate as well as specialized dosage forms such as self-emulsifying delivery systems and formulation techniques such as inclusion complexes and solid dispersions. These formulation approaches are discussed with available examples with specific reference to positive outcomes in terms of drug solubility and bioavailability enhancement.

A novel study on curcumin metal complexes: solubility improvement, bioactivity, and trial burn wound treatment in rats

This paper describes a new technique to enhance the solubility of metal curcumin complexes.

Utilization of a fattigation platform gelatin-oleic acid sodium salt conjugate as a novel solubilizing adjuvant for poorly water-soluble drugs via self-assembly and nanonization

Solubilizing adjuvants are commonly used to dissolve insoluble drugs by simply adding in a formulation. In this study, gelatin and oleic acid sodium salt (OAS), a generally recognized as safe-listed material were chosen and conjugated to develop a natural solubilizing adjuvant using the fattigation platform technology to enhance solubility and dissolution rate of poorly water-soluble drugs according to self-assembly and nanonization principle when simply mixed with poorly water-soluble drugs. We synthesized the gelatin and OAS conjugates (GOC) at three different ratios (1:1, 1:3, 1:5; GOC 1, GOC 2, and GOC 3, respectively) via the 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide/N-hydroxysuccinimide reaction using a spray dryer. This amphiphilic micronized GOC was self-assembled into nanoparticles. The synthesis of new amphiphilic conjugates was identified through Fourier transform-infrared (FT-IR) spectroscopy. The powder properties of the GOCs, such as angle of repose, bulk density, and tapped density were varied with the oleic acid bonding ratio. Then, GOCs were utilized to investigate the enhanced solubility and release rate of various poorly water-soluble drugs such as cilostazol (CSZ), coenzyme Q10, ticagrelor, telmisartan, aprepitant and itraconazole as model drugs. Based on the solubility studies by concentration and type of GOCs, 3% GOC 2 was selected. When this GOC was mixed with these model drugs by the physical mixing, wetting and hot melting methoods, the solubility was highly enhanced compared to the pure control drug, ranging from 20 to 150,000 times. In case of CSZ, all formulations were significantly improved release rate compared to the of CSZ alone and the reference tablet, cilostan® (Korea United Pharm) in simulated intestinal fluid containing 0.2% sodium lauryl sulfate. Differential scanning calorimetry and powder X-ray diffraction were conducted to confirm the crystal polymorphic structure of CSZ, and as a result they changed to diminutive peak intensity compared to CSZ alone. Field-emission scanning electron microscopy indicated that GOC was round with a reduced size of about 100 nm. The reduction of drug particles via nanonization and self-assembly of amphiphilic GOC in an aqueous media could be a key factor to improve poor water solubility by providing a favorable dispersion of drug molecules in an amphiphilic network.

Ester coupling of ibuprofen in hydrogel matrix: A facile one-step strategy for controlled anti-inflammatory drug release

Ibuprofen (IBU) is a non-steroidal anti-inflammatory drug (NSAID) commonly used in the treatment of pain, fever and inflammation. However, the administration of IBU in its free carboxylic acid form is strongly dependent on its limited solubility in aqueous solution. This mandates for an increased drug concentration to reach the therapeutic window, and promotes the alternative use of IBU sodium salt, even if this latter form poses significant constraints in terms of tunable release due to its uncontrolled and rapid diffusion. A potential solution is represented by oral administration through physical encapsulation of ibuprofen in designed carriers, despite this route limits the application of this therapeutic agent. In this work, we propose the covalent tethering of ibuprofen to a hydrogel matrix via esterification reaction. Exploiting the cleavability of the ester bond under physiological conditions, we propose a controlled drug delivery system where the whole drug payload can be released, thus overcoming the questioned aspects of over-dosage and solubility-dependent administration. In particular, we tested the biological activity of cleaved ibuprofen in terms of cyclooxygenase inhibition, reporting that chemical tethering did not alter the efficiency of the NSAID. Moreover, due to the sol-gel transition of the hydrogel matrix, these ibuprofen-functionalized hydrogels could be used as injectable tools in several clinical scenarios, performing a localized drug release and opening advanced avenues for in situ treatments.

Successful oral delivery of poorly water-soluble drugs both depends on the intraluminal behavior of drugs and of appropriate advanced drug delivery systems

Poorly water-soluble drugs continue to be a problematic, yet important class of pharmaceutical compounds for treatment of a wide range of diseases. Their prevalence in discovery is still high, and their development is usually limited by our lack of a complete understanding of how the complex chemical, physiological and biochemical processes that occur between administration and absorption individually and together impact on bioavailability. This review defines the challenge presented by these drugs, outlines contemporary strategies to solve this challenge, and consequent in silico and in vitro evaluation of the delivery technologies for poorly water-soluble drugs. The next steps and unmet needs are proposed to present a roadmap for future studies for the field to consider enabling progress in delivery of poorly water-soluble compounds.

Solubilization of ibuprofen for freeze dried parenteral dosage forms

Ibuprofen, a weakly acidic non-steroidal anti-inflammatory drug having poor aqueous solubility, is a challenging drug for the development of pharmaceutical formulations, resulting in numerous research attempts focusing on improvement of its solubility and consequently bioavailability. Most studies have been done for solid dosage forms, with very little attention paid to parenterals. Hence, the main purpose of the present study was to enhance ibuprofen solubility as a result of formulation composition and the freeze drying process. Moreover, the purpose was to prepare a freeze dried dosage form with improved ibuprofen solubility that could, after simple reconstitution with water for injection, result in an isotonic parenteral solution. Solubility of ibuprofen was modified by various excipients suitable for parenteral application. Drug interactions with selected excipients in the final product/lyophilisate were studied by a combined use of XRPD, DSC, Raman and ss-NMR. Analyses of lyophilized samples showed solubility enhancement of ibuprofen and in situ formation of an ibuprofen salt with the alkaline excipients used.

Preparation and investigation of indirubin-loaded SLN nanoparticles and their anti-cancer effects on human glioblastoma U87MG cells

Indirubin, an ingredient in traditional Chinese medicine, is considered as an anti-cancer agent. However, due to its hydrophobic nature, clinical efficiency has been limited. Drug delivery via nanotechnology techniques open new windows toward treatment of cancerous patients. Glioblastoma multiforme (GBM) is the most severe and common type of brain primary tumors. Of common problems in targeting therapies of glioblastoma is the availability of drug in tumoric tissues. In this study, Indirubin loaded solid lipid nanoparticles were prepared and their therapeutic potentials and antitumoric effects were assessed on GBM cell line (U87MG). The SLNs were prepared with Cetyl palmitate and Polysorbat 80 via high-pressure homogenization (HPH) methods in hot mode. Then, properties of SLNs including size, zeta potential, drug encapsulation efficacy (EE %) and drug loading were characterized. SLNs morphology and size were observed using SEM and TEM. The crystalinity of formulation was determined by different scattering calorimetry (DSC). The amount of drug release and antitumor efficiency were evaluated at both normal brain pH of 7.2 and tumoric pH of 6.8. The prapared SLNs had mean size of 130 nm, zeta potential of -16 mV and EE of 99.73%. The results of DSC showed proper encapsulation of drug into SLNs. Drug release assessment in both pH displayed sustain release property. The result of MTT test exhibited a remarkable increment in antitumor activity of Indirubin loaded SLN in comparison with free form of drug and blank SLN on multiform GB. This study indicated that Indirubin loaded SLNs could act as a useful anticancer drugs.

Improving Dissolution Properties by Polymers and Surfactants: A Case Study of Celastrol

Two polymorphs of celastrol were discovered and fully characterized by X-ray powder diffraction, thermogravimetry analysis, and differential scanning calorimetry. The single-crystal structures of form I and the isostructural solvate of form II were disclosed by single-crystal X-ray diffraction. The apparent solubility and wettability of both the crystalline forms were determined. It was found that surfactant can significantly improve the solubility of celastrol up to more than 10⁴ times. Tween 80 and sodium dodecyl sulfate largely improved the wettability of the 2 crystals. Form I shows better wettability than form II in all the buffer solutions with polymers and surfactants. Compared with form II, form I exhibits higher solubility in carboxymethylcellulose and polyvinylpyrrolidone media but much lower solubility in tween 80 and sodium dodecyl sulfate solutions. An investigation of wettability and solubility mechanisms was fully explored, and a hypothesis was proposed to understand the abnormal solubility differences.

Feasibility of Using Gluconolactone, Trehalose and Hydroxy-Propyl Gamma Cyclodextrin to Enhance Bendroflumethiazide Dissolution Using Lyophilisation and Physical Mixing Techniques

Purpose: Hydrophobic drugs are facing a major challenge in dissolution rate enhancement and solubility in aqueous solutions; therefore, a variety of methods have been used to improve dissolution rate and/or solubility of bendroflumethiazide as a model hydrophobic drug. Methods: In this study, two main methods (physical mixing and lyophilisation) were used with gluconolactone, hydroxyl propyl γ-ccyclodextrin, and trehalose to explore this challenge. Bendroflumethiazide, practically insoluble in water, was mixed with one of the three excipients gluconolactone, hydroxyl propyl γ-cyclodextrin, and trehalose in three different ratios 1:1, 1:2, 1:5. To the best of our knowledge, the dissolution of the drug has not been previously enhanced by using either these methods or any of the used excipients. Samples containing drug and each of the excipients were characterized via dissolution testing, Fourier Transform infra-red spectroscopy, differential scanning calorimetry, and scanning electron microscopy. Results: The used methods showed a significant enhancement in dug dissolution rate; physical mixing significantly, p < 0.05, increased the percentage of the drug released with time; for example, bendroflumethiazide dissolution in distilled water was improved from less than 20% to 99.79% within 90 min for physically mixed drug-cyclodextrin 1:5. The lyophilisation process was enhanced and the drug dissolution rate and the highest drug dissolution was achieved for (drug-gluconolactone 1:1) with 98.98% drug release within 90 min. Conclusions: the physical mixing and freeze drying processes significantly increased the percentage of drug release with time.