Preparation and characterization of pyrimethamine solid dispersions and an evaluation of the physical nature of pyrimethamine in solid dispersions

Enhanced drug release through nitrendipine/hydroxypropyl methylcellulose solid dispersion via supercritical antisolvent technique

The poor water solubility of nitrendipine (NT) results in low oral bioavailability, which hinders its practical application. Hydroxypropyl methylcellulose (HPMC) is a prominent drug carrier that has been applied in the biomedical field due to its significant characteristics, such as large surface area, biocompatibility and biodegradability. In this study, an efficient drug delivery system based on the preparation of NT/HPMC solid dispersion using supercritical antisolvent (SAS) technology was proposed. The effect of different operating parameters such as solvent, host guest ratio, concentration, temperature, and pressure on NT/HPMC was optimized to obtain dispersed particles with maximum solubility. The formed solid dispersion presents non-static spherical particles with a high surface area and small particle size. Importantly, in vitro drug release studies have demonstrated that the dissolution and solubility of NT in solid dispersion are significantly enhanced compared to pure drug. In vitro bioactivity experiments showed that the NT/HPMC solid dispersion has good biocompatibility and antibacterial performance. Thus, this study indicates that solid dispersion prepared using SAS technology are considered a promising drug delivery system.

Designing type V deep eutectic solvents with antimalarial pharmaceutical ingredients

This work studies the formation of deep eutectic solvents formed by one active pharmaceutical ingredient (quinine, pyrimethamine, or 2-phenylimidazopyridine) and a second component potentially acting as an excipient (betaine, choline chloride, tetramethylammonium chloride, thymol, menthol, gallic acid, vanillin, acetovanillone, 4-hydroxybenzaldehyde, syringaldehyde, propyl gallate, propylparaben, or butylated hydroxyanisole), aiming to address challenges regarding drug solubility, bioavailability, and permeability. A preliminary screening was carried out using the thermodynamic model COSMO-RS, narrowing down the search to three promising excipients (thymol, propyl gallate, and butylated hydroxyanisole). Nine solid-liquid equilibrium (SLE) phase diagrams were experimentally measured combining the three model drugs with the screened excipients, and using a combination of a visual melting method and differential scanning calorimetry. Negative deviations from thermodynamic ideality were observed in all nine systems. Furthermore, a total of four new cocrystals were found, with powder and single crystal X-ray diffraction techniques being employed to verify their unique diffraction patterns. In the thermodynamic modelling of the SLE diagrams, two COSMO-RS parametrizations (TZVP and TZVPD-FINE) were also applied, though neither consistently delivered a better description over the other.

Stability Challenges of Amorphous Solid Dispersions of Drugs: A Critical Review on Mechanistic Aspects

The most common drawback of the existing and novel drug molecules is their low bioavailability because of their low solubility. One of the most important approaches to enhance the bioavailability in the enteral route for poorly hydrophilic molecules is amorphous solid dispersion (ASD). The solubility of compounds in amorphous form is comparatively high because of the availability of free energy produced during formulation. This free energy results in the change of crystalline nature of the prepared ASD to the stable crystalline form leading to the reduced solubility of the product. Due to the intrinsic chemical and physical uncertainty and the restricted knowledge about the interactions of active molecules with the carriers making, this ASD is a challenging task. This review focused on strategies to stabilize ASD by considering the various theories explaining the free-energy concept, physical interactions, and thermal properties. This review also highlighted molecular modeling and machine learning computational advancement to stabilize ASD.

How to Improve Solubility and Dissolution of Irbesartan by Fabricating Ternary Solid Dispersions: Optimization and In-Vitro Characterization

The purpose of this study is to improve the solubility and dissolution of a poorly soluble drug, Irbesartan, using solid dispersion techniques. For that purpose, different polymers such as Soluplus^®, Kollidon^® VA 64, Kolliphor^® P 407, and Polyinylpyrrolidone (PVP-K30) were used as carriers at different concentrations to prepare solid dispersion formulations through the solvent evaporation method. In order to prepare binary dispersion formulations, Soluplus^® and Kollidon^® VA 64 were used at drug: polymer ratios of 1:1, 1:2, 1:3, and 1:4 (w/w). Saturation solubility of the drug in the presence of used carriers was performed to investigate the quantitative increase in solubility. Dissolution studies were performed to explore the drug release behavior from the prepared dispersions. Additionally, the characterization of the prepared formulations was carried out by performing DSC, SEM, XRD, and FTIR studies. The results revealed that among binary systems, K₄ formulation (Drug: Kollidon^® VA 64 at ratio of 1:4 w/w) exhibited optimal performance in terms of increased solubility, drug release, and other investigated parameters. Furthermore, ternary dispersion formulations of the optimized binary formulation were prepared with two more polymers, Kolliphor^® P 407 and Polyvinylpyrrolidone (PVP-K30), at (Drug: Kollidon^® VA 64:ternary polymer) ratios of 1:4:1, 1:4:2, and 1:4:3 (w/w). The results showed that KPVP (TD₃) exhibited the highest increase in solubility, as well as dissolution rate, among ternary solid dispersion formulations. Results of solubility enhancement by ternary solid dispersion formulations were also supported by FTIR, DSC, XRD, and SEM analysis. Conclusively, it was found that the ternary solid dispersion-based systems were more effective compared to the binary combinations in improving solubility as well as dissolution of a poorly soluble drug (Irbesartan).

Characterization of Novel Solid Dispersions of Moringa oleifera Leaf Powder Using Thermo-Analytical Techniques

Moringa oleifera leaf powder (MOLP) has been identified as the most important functional ingredient owing to its rich nutritional profile and healthy effects. The solubility and functional properties of this ingredient can be enhanced through solid dispersion technology. This study aimed to investigate the effects of polyethylene glycols (PEGs) 4000 and 6000 as hydrophilic carriers and solid dispersion techniques (freeze-drying, melting, solvent evaporation, and microwave irradiation) on the crystallinity and thermal stability of solid-dispersed Moringa oleifera leaf powders (SDMOLPs). SDMOLPs were dully characterized using powder X-ray diffraction (PXRD), differential scanning calorimetry (DSC), thermo-gravimetric analysis (TGA), and Fourier transform infrared spectroscopy (FTIR). The PXRD results revealed that the solid dispersions were partially amorphous with strong diffraction peaks at 2θ values of 19° and 23°. The calorimetric and thermogravimetric curves showed that PEGs conferred greater stability on the dispersions. The FTIR studyrevealed the existence of strong intermolecular hydrogen bond interactions between MOLP and PEG functional groups. MOLP solid dispersions may be useful in functional foods and beverages and nutraceutical formulations.

Cellulose derivatives as effective recrystallization inhibitor for ternary ritonavir solid dispersions: In vitro-in vivo evaluation

Amorphous solid dispersions (ASDs) are regarded as one of the most promising techniques for poorly-soluble active pharmaceutical ingredients (API). However, the thermodynamic instability of ASDs at supersaturated state makes them easy to recrystallize in aqueous media. In this study, ritonavir (RTV) was selected as a model drug for evaluating the solubility enhancement and recrystallization inhibition effect of various cellulose derivatives and the combinations of them with typical surfactants. Combination of HPMCAS-HF/SLS was filtrated for preparing ternary RTV solid dispersions (RTV SD) via solvent evaporation method. RTV SD exhibited enhanced dissolution manner, while the oral bioavailability of RTV SD was equivalent with the Reference Standard Norvir® but increased significantly compared to the ternary physical mixture. Thus, the ternary SD system might be promisingly employed as efficient drug delivery system for RTV, while the HPMCAS-HF/SLS combination could be recommended as effective excipient for fabricating steady solid dispersions loading poorly soluble API.

Role of Surfactant Micellization for Enhanced Dissolution of Poorly Water-Soluble Cilostazol Using Poloxamer 407-Based Solid Dispersion via the Anti-Solvent Method

This study aimed to investigate the role of micellization of sodium lauryl sulfate (SLS) in poloxamer 407 (POX)-based solid dispersions (POX-based SDs) using the anti-solvent method in enhancing the dissolution rate of practically water-insoluble cilostazol (CLT). Herein, SLS was incorporated into CLT-loaded SDs, at a weight ratio of 50:50:10 of CLT, POX, and SLS by three different methods: anti-solvent, fusion (60 °C), and solvent (ethanol) evaporation. The SDs containing micellar SLS in the anti-solvent method were superior in the transformation of the crystalline form of the drug into a partial amorphous state. It was notable that there was an existence of a hydrophobic interaction between the surfactant and the hydrophobic regions of polymer chain via non-covalent bonding and the adsorption of micellar SLS to the POX-based SDs matrix. Moreover, SLS micellization via the anti-solvent method was effectively interleaved in SDs and adhered by the dissolved CLT, which precluded drug particles from aggregation and recrystallization, resulting in improved SD wettability (lower contact angle) and reduced particle size and dissolution rate. In contrast, SDs without micellar SLS prepared by the solvent method exerted drug recrystallization and an increase of particle size, resulting in decreased dissolution. Incorporation of surfactant below or above critical micellar concentration (CMC) in SDs using the anti-solvent method should be considered in advance. Dissolution results showed that the pre-added incorporation of micellar SLS into POX-based SDs using the anti-solvent method could provide a way of a solubilization mechanism to enhance the dissolution rate of poorly water-soluble drugs.

Conducting polymer nanoparticles for a voltage-controlled release of pharmacological chaperones

Pharmacological chaperones (PCs) are low-molecular weight chemical molecules used in patients for the treatment of some rare diseases caused primarily by protein instability. A controlled and on-demand release of PCs via nanoparticles is an alternative for cases in which long treatments are needed and prolonged oral administration could have adverse effects. In this work, pyrimethamine (PYR), which is a potent PC consisting of pyrimidine-2,4-diamine substituted at position 5 by a p-chlorophenyl group and at position 6 by an ethyl group, was successfully loaded in electroresponsive poly(3,4-ethylenedioxythiophene) nanoparticles (PEDOT NPs). The PYR-loading capacity was 11.4 ± 1.5%, with both loaded and unloaded PEDOT NPs exhibiting similar sizes (215 ± 3 and 203 ± 1 nm, respectively) and net surface charges (-26 ± 7 and -29 ± 6 mV, respectively). In the absence of electrical stimulus, the release of PC from loaded NPs is very low (1.6% in 24 h and 18% in 80 days) in aqueous environments. Instead, electrical stimuli that sustained for 30 min enhanced the release of PYR, which was ∼50% when the voltage was scanned from -0.5 V to 0.5 V (cyclic voltammetry) and ∼35% when a constant voltage of 1.0 V was applied (chronoamperometry).

Highly Water-Soluble Solid Dispersions of Honokiol: Preparation, Solubility, and Bioavailability Studies and Anti-Tumor Activity Evaluation

Honokiol (HK), a well-tolerated natural product, has many multiple pharmacological activities. However, its poor water solubility and low bioavailability limit its clinical application and development. The aim of this research was to prepare the solid dispersion (SD) formulation of honokiol (HK) with poloxamer-188 (PLX) as the carrier, thereby improving its solubility and oral bioavailability. Firstly, by investigating the relationship between the addition amount of the PLX and the solubility of HK, and the effects of solid dispersions with different ratios of HK-PLX on the solubility of HK, we determined that the optimum ratio of PLX to HK was (1:4). Then, the HK-PLX (1:4) SD of HK was prepared using the solvent evaporation method. The morphology of the obtained HK-PLX (1:4) SD was different from that of free HK. The HK in the HK-PLX (1:4) SD existed in amorphous form and formed intermolecular hydrogen bonds with PLX. Additionally, the solubility values of the HK-PLX (1:4) SD were about 32.43 ± 0.36 mg/mL and 34.41 ± 0.38 mg/mL in artificial gastric juice (AGJ) and in artificial intestinal juice (AIJ), respectively. Compared with free HK, the release rate and the bioavailability was also substantially improved for HK in its SD form. 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay indicated that the HK-PLX (1:4) SD showed higher inhibition of HepG2 cells than free HK. Taken together, the present study suggests that the HK-PLX (1:4) SD could become a new oral drug formulation with high bioavailability and could produce a better response for clinical applications of HK.

Modulation of Drug Crystallization and Molecular Interactions by Additives in Solid Dispersions for Improving Drug Bioavailability

Background::

An increase in poorly water-soluble drugs makes the design of drug delivery systems challenging.

Methods::

Currently, a number of prospective solid dispersions have been investigated with potential applications for delivering a variety of poorly water-soluble drugs. A number of traditional solid dispersions and modifiedsolid dispersions offer attractive advantages in the fabrication, design and development of those drugs for effective therapeutics.

Results::

Although traditional solid dispersions can produce a higher release rate, resulting in higher bioavailability compared to conventional dosage forms, this method is not always a promising approach. Modified-solid dispersion has demonstrated both the ability of its polymers to transform drug crystals into amorphous forms and molecular interactivity, thereby improving drug dissolution rate and bioavailability, especially with tough drugs. However, the classification of modified-solid dispersion, which guides the selection of the right strategy in solid dispersion preparation, remains ill-defined.

Conclusions::

This review focused on effective strategies in using additives in solid dispersion for improving drug bioavailability.

Solid dispersion technology as a strategy to improve the bioavailability of poorly soluble drugs

Over the last half-century, solid dispersions (SDs) have been intensively investigated as a strategy to improve drugs solubility and dissolution rate, enhancing oral bioavailability. In this review, an overview of the state of the art of SDs technology is presented, focusing on their classification, the main preparation methods, the limitations associated with their instability, and the marketed products. To fully take advantage of SDs potential, an improvement in their physical stability and the ability to prolong the supersaturation of the drug in gastrointestinal fluids is required, as well as a better scientific understanding of scale-up for defining a robust manufacturing process. Taking these limitations into account will contribute to increase the number of marketed pharmaceutical products based on SD technology.

Prediction and elucidation of factors affecting solubilisation of imatinib mesylate in lipids

The physico-chemical properties of lipids influencing the solubilisation of imatinib mesylate (IM) in lipid matrix were evaluated and a statistical model to predict the same has been derived in the present study. After experimental quantification of IM solubility in various lipids, Hansen Hildebrand's total solubility parameters were calculated in order to study the role of various forces connected to lipid-drug interaction. To develop a relationship between the various descriptors of the lipids and experimental solubility of IM in lipids (% w/w), quantitative structure-solubility relationship (QSSR) was used. To generate equations that can predict the solubility of IM in lipids (%w/w), multiple linear regression was used. Amongst the various lipids tested, glyceryl monostearate and behenic acid solubilised the highest (6.19 ± 0.22%) and lowest (0.01 ± 0.01%) amounts of IM respectively. Our results suggested that alkyl chain length, polarity of the lipids, index of cohesive interaction in solids, estimated number of hydrogen bonds that would be accepted by the solute from water molecules in an aqueous solution, estimated number of hydrogen bonds that would be donated by the solute to water molecules in an aqueous solution and solvent accessible surface area collectively play a significant role in solubilising IM in the lipids. The equation developed could predict the solubility of IM in lipids with good accuracy (R²_pred = 0.912).