Modified mesoporous silica nanoparticles coated by polymer complex as novel curcumin delivery carriers

Candesartan Cilexetil Formulations in Mesoporous Silica: Preparation, Enhanced Dissolution In Vitro, and Oral Bioavailability In Vivo

Candesartan cilexetil (CC) is one of well-tolerated antihypertensive drugs, while its poor solubility and low bioavailability limit its use. Herein, two mesoporous silica (Syloid XDP 3150 and Syloid AL-1 FP) and the corresponding amino-modified products (N-XDP 3150 and N-AL-1 FP) have been selected as the carriers of Candesartan cilexetil to prepare solid dispersion through solvent immersion, and characterized through using powder X-ray diffraction analysis, infrared spectroscopy, differential scanning calorimetry, scanning electron microscopy, and solid-state nuclear magnetic resonance spectroscopy, etc. The state of CC changed from crystalline to amorphous after loading onto the silica carriers, in which no interactions between CC and silica existed. Then, the dissolution behaviors in vitro were studied through using flow-through cell dissolution method. CC-XDP 3150 sample exhibited the most extensive dissolution, and the cumulative release of CC from it was 1.88-fold larger than that of CC. Moreover, the pharmacokinetic results in rats revealed that the relative bioavailability of CC-XDP 3150 and CC-N-XDP 3150 solid dispersions were estimated to be 326 % % and 238 % % in comparison with CC, respectively. Clearly, pore size, pore volume, and surface properties of silica carrier have remarkable effect on loading, dissolution and bioavailability of CC. In brief, this work will provide valuable information in construction of mesoporous silica-based delivery system toward poorly water-soluble drugs.

Porous Silica Nanomaterials as Carriers of Biologically Active Natural Polyphenols: Effect of Structure and Surface Modification

For centuries, humans have relied on natural products to prevent and treat numerous health issues. However, biologically active compounds from natural sources, such as polyphenols, face considerable challenges, due to their low solubility, rapid metabolism, and instability, which hinder their effectiveness. Advances in the nanotechnologies have provided solutions to overcoming these problems through the use of porous silica materials as polyphenol carriers. These materials possess unique properties, such as a high specific surface area, adjustable particle and pore sizes, and a surface that can be easily and selectively modified, which favor their application in delivery systems of polyphenols. In this review, we summarize and discuss findings on how the pore and particle size, structure, and surface modification of silica materials influence the preparation of efficient delivery systems for biologically active polyphenols from natural origins. The available data demonstrate how parameters such as adsorption capacity, release and antioxidant properties, bioavailability, solubility, stability, etc., of the studied delivery systems could be affected by the structural and chemical characteristics of the porous silica carriers. Results in the literature confirm that by regulating the structure and selecting the appropriate surface modifications, the health benefits of the loaded bioactive molecules can be significantly improved.

Sol-Gel Synthesis of Silica-Poly (Vinylpyrrolidone) Hybrids with Prooxidant Activity and Antibacterial Properties

The present work deals with the sol-gel synthesis of silica-poly (vinylpyrrolidone) hybrid materials. The nanohybrids (Si-PVP) have been prepared using an acidic catalyst at ambient temperature. Tetramethyl ortosilane (TMOS) was used as a silica precursor. Poly (vinylpyrrolidone) (PVP) was introduced into the reaction mixture as a solution in ethanol with a concentration of 20%. The XRD established that the as-prepared material is amorphous. The IR and 29Si MAS NMR spectra proved the formation of a polymerized silica network as well as the hydrogen bonding interactions between the silica matrix and OH hydrogens of the silanol groups. The TEM showed spherical particle formation along with increased agglomeration tendency. The efficacy of SiO2/PVP nanoparticles as a potential antimicrobial agent against a wide range of bacteria was evaluated as bacteriostatic, using agar diffusion and spot tests. Combined effects of hybrid nanomaterial and antibiotics could significantly reduce the bactericidal concentrations of both the antibiotic and the particles, and they could also eliminate the antibiotic resistance of the pathogen. The registered prooxidant activity of the newly synthesized material was confirmative and explicatory for the antibacterial properties of the tested substance and its synergetic combination with antibiotics. The effect of new hybrid material on Crustacea Daphnia magna was also estimated as harmless under concentration of 0.1 mg/mL.

Curcumin-loaded mesoporous silica nanoparticles for drug delivery: synthesis, biological assays and therapeutic potential - a review

Curcumin-loaded mesoporous silica nanoparticles (MSNs) have shown promise as drug delivery systems to address the limited pharmacokinetic characteristics of curcumin. Functionalization with folic acid and PEGylation enhance anticancer activity, biocompatibility, stability, and permeability. Co-delivery with other drugs results in synergistically enhanced cytotoxic activity. Environment-responsive MSNs prevent undesirable drug leakage and increase selectivity towards target tissues. This review summarizes the methods of Cur-loaded MSN synthesis and functionalization and their application in various diseases, and also highlights the potential of Cur-loaded MSNs as a promising drug delivery system.

Barrier behaviour of partially N-acetylated chitosan layers in aqueous media

Chitosan coatings of 353 ± 12 nm thickness were prepared on glass and zinc substrates by dip-coating method to study their barrier-behaviour. The coatings were chemically modified to increase their degree of acetylation (DA) from ca. 44 % up to ca. 98 % resulting a quasi-chitin coating. The effect of the acetylation reaction was studied by infrared spectroscopy, and the structural changes of the native and acetylated coatings were investigated by UV-Vis spectrophotometry and X-ray diffraction. The surface properties of the coated samples were characterized by wettability measurements - advancing water contact angle decreased from ca. 80° (native) to ca. 43° (fully acetylated) - and microscopic (SEM, AFM) studies. The barrier behaviour of the chitosan layer depending on the DA was evaluated by electrochemical impedance spectroscopy studies and with a special mesoporous silica - chitosan bilayer system by measuring the amount of dye (Rhodamine 6G) accumulated in the silica through the chitosan coating during an impregnation step. These methods showed significant decrease in the barrier-effect of the coatings with increasing DA (accumulation of approximately six times more dye and a reduction of charge transfer resistance by an order of magnitude), due to the structural and ionization changes in the coatings.

In Vitro Efficacy of Curcumin-Loaded Amine-Functionalized Mesoporous Silica Nanoparticles against MCF-7 Breast Cancer Cells

Purpose: Mesoporous silica nanoparticles (MSNs) have drawn substantial interest as drug nanocarriers for breast cancer therapy. Nevertheless, because of the hydrophilic surfaces, the loading of well-known hydrophobic polyphenol anticancer agent curcumin (Curc) into MSNs is usually very low. Methods: For this purpose, Curc molecules were loaded into amine-functionalized MSNs (MSNs-NH₂ -Curc) and characterized using thermal gravimetric analysis (TGA), Fourier-transform infrared (FTIR), field emission scanning electron microscope (FE-SEM), transmission electron microscope (TEM), Brunauer-Emmett-Teller (BET). MTT assay and confocal microscopy, respectively, were used to determine the cytotoxicity and cellular uptake of the MSNs-NH₂ - Curc in the MCF-7 breast cancer cells. Besides, the expression levels of apoptotic genes were evaluated via quantitative polymerase chain reaction (qPCR) and western blot. Results: It was revealed that MSNs-NH₂ possessed high values of drug loading efficiency and exhibited slow and sustained drug release compared to bare MSNs. According to the MTT findings, while the MSNs-NH₂ -Curc were nontoxic to the human non-tumorigenic MCF-10A cells at low concentrations, it could considerably decrease the viability of MCF-7 breast cancer cells compared to the free Curc in all concentrations after 24, 48 and 72 hours exposure times. A cellular uptake study using confocal fluorescence microscopy confirmed the higher cytotoxicity of MSNs-NH₂ -Curc in MCF-7 cells. Further, it was found that the MSNs-NH₂ -Curc could drastically affect the mRNA and protein levels of Bax, Bcl-2, caspase 3, caspase 9, and hTERT relative to the free Curc treatment. Conclusion: Taken together, these preliminary results suggest the amine-functionalized MSNs-based drug delivery platform as a promising alternative approach for Curc loading and safe breast cancer treatment.

Natural Biopolymers as Smart Coating Materials of Mesoporous Silica Nanoparticles for Drug Delivery

In recent years, the functionalization of mesoporous silica nanoparticles (MSNs) with different types of responsive pore gatekeepers have shown great potential for the formulation of drug delivery systems (DDS) with minimal premature leakage and site-specific controlled release. New nanotechnological approaches have been developed with the objective of utilizing natural biopolymers as smart materials in drug delivery applications. Natural biopolymers are sensitive to various physicochemical and biological stimuli and are endowed with intrinsic biodegradability, biocompatibility, and low immunogenicity. Their use as biocompatible smart coatings has extensively been investigated in the last few years. This review summarizes the MSNs coating procedures with natural polysaccharides and protein-based biopolymers, focusing on their application as responsive materials to endogenous stimuli. Biopolymer-coated MSNs, which conjugate the nanocarrier features of mesoporous silica with the biocompatibility and controlled delivery provided by natural coatings, have shown promising therapeutic outcomes and the potential to emerge as valuable candidates for the selective treatment of various diseases.

3D printed MCT oleogel as a co-delivery carrier for curcumin and resveratrol

Designing a suitable matrix to protect sensitive bioactive compounds is an important stage in nutraceutical development. In this study, emulsion templated medium-chain triglycerides (MCT) oleogel was developed as co-delivery carriers for synergistic nutraceuticals, curcumin, and resveratrol and to 3D print in customized shapes for personalized nutrition. To obtain the stable emulsion, gelatin and gellan gum were added such that their protein-polysaccharide interaction helps in the structuring of the oil phase. Increasing the amount of gellan gum had a positive effect on stabilizing the emulsion but became the critical parameter during 3D printing. Hence, gellan gum of 1.5% (w/v) and gelatin at 10% (w/v) of water were considered optimum to produce a stable 30% O/W emulsion for 3D printing. Upon analyzing the in-vitro digestion behavior of the oleogel, it was observed that the bioactives were protected under oral and gastric conditions and allowed intestinal targeted delivery. The total bioaccessible fraction increased up to 1.13-fold and 1.2-fold for curcumin and resveratrol respectively compared to control (MCT oil). The FFAs release profile also indicated that gelators play an important role in lipase activity. Also, the ex-vivo everted gut sac analysis showed enhanced permeation of about 1.83 times and 1.13 times for curcumin and resveratrol respectively. Thus, this study provides useful insights into the 3D printing of emulsion templated oleogel as personalized nutraceutical carriers.

Efficient Delivery of Curcumin by Alginate Oligosaccharide Coated Aminated Mesoporous Silica Nanoparticles and In Vitro Anticancer Activity against Colon Cancer Cells

We designed and synthesized aminated mesoporous silica (MSN-NH2), and functionally grafted alginate oligosaccharides (AOS) on its surface to get MSN-NH2-AOS nanoparticles as a delivery vehicle for the fat-soluble model drug curcumin (Cur). Dynamic light scattering, thermogravimetric analysis, and X-ray photoelectron spectroscopy were used to characterize the structure and performance of MSN-NH2-AOS. The nano-MSN-NH2-AOS preparation process was optimized, and the drug loading and encapsulation efficiencies of nano-MSN-NH2-AOS were investigated. The encapsulation efficiency of the MSN-NH2-Cur-AOS nanoparticles was up to 91.24 ± 1.23%. The pH-sensitive AOS coating made the total release rate of Cur only 28.9 ± 1.6% under neutral conditions and 67.5 ± 1% under acidic conditions. According to the results of in vitro anti-tumor studies conducted by MTT and cellular uptake assays, the MSN-NH2-Cur-AOS nanoparticles were more easily absorbed by colon cancer cells than free Cur, achieving a high tumor cell targeting efficiency. Moreover, when the concentration of Cur reached 50 μg/mL, MSN-NH2-Cur-AOS nanoparticles showed strong cytotoxicity against tumor cells, indicating that MSN-NH2-AOS might be a promising tool as a novel fat-soluble anticancer drug carrier.

Polysaccharide/mesoporous silica nanoparticle-based drug delivery systems: A review

Mesoporous silica nanoparticles (MSNs) have been well-researched in the design and fabrication of advanced drug delivery systems (DDSs) due to their advantages such as good biocompatibility, large specific surface area and pore volume for drug loading, easily surface modification, adjusted size and good thermal/chemical stability. For MSN-based DDSs, gate materials are also necessary. And natural polysaccharides, one kind of the most abundant natural resource, have been widely applied as the "gatekeepers" in MSN-based DDSs. Polysaccharides are cheap and rich in sources with good biocompatibility, and some of them have important biological functions. In this review article, polysaccharides including chitosan, hyaluronic acid, sodium alginate and dextran, et al. are briefly introduced. And the preparation processes and properties such as controlled drug release, cancer targeting and disease diagnosis of functional polysaccharide/MSN-based DDSs are discussed.

Recent Technologies for Amorphization of Poorly Water-Soluble Drugs

Amorphization technology has been the subject of continuous attention in the pharmaceutical industry, as a means to enhance the solubility of poorly water-soluble drugs. Being in a high energy state, amorphous formulations generally display significantly increased apparent solubility as compared to their crystalline counterparts, which may allow them to generate a supersaturated state in the gastrointestinal tract and in turn, improve the bioavailability. Conventionally, hydrophilic polymers have been used as carriers, in which the amorphous drugs were dispersed and stabilized to form polymeric amorphous solid dispersions. However, the technique had its limitations, some of which include the need for a large number of carriers, the tendency to recrystallize during storage, and the possibility of thermal decomposition of the drug during preparation. Therefore, emerging amorphization technologies have focused on the investigation of novel amorphous-stabilizing carriers and preparation methods that can improve the drug loading and the degree of amorphization. This review highlights the recent pharmaceutical approaches utilizing drug amorphization, such as co-amorphous systems, mesoporous particle-based techniques, and in situ amorphization. Recent updates on these technologies in the last five years are discussed with a focus on their characteristics and commercial potential.

Dual drug release mechanisms through mesoporous silica nanoparticle/electrospun nanofiber for enhanced anticancer efficiency of curcumin

Electrospun nanofibers (NFs)-based drug delivery approaches are of particular interest as a hopeful implantable nanoplatform for localized cancer therapy and treating tissue defect after resection, allowing the on-site drug delivery with minimal side effect to healthy cells. To maintain therapeutic concentrations of anticancer molecules for a relatively long time through a combination of burst and sustained drug release mechanisms, a hybrid of polycaprolactone and gelatin (PCL/GEL) was used for co-encapsulation of free curcumin (CUR) and CUR-loaded mesoporous silica nanoparticles (CUR@MSNs) via electrospinning, resulting in a novel drug-loaded nanofibrous scaffold, CUR/CUR@MSNs-NFs. The as-prepared MSNs and composite NFs were characterized via TGA, FTIR, FE-SEM, TEM, and BET. In vitro release profile of CUR from CUR/CUR@MSNs-NFs was examined, and the in vitro antitumor efficacy against MDA-MB-231 breast cancer cells was also evaluated through MTT, scratch assay, DAPI staining, and real-time PCR. The results disclosed that the smooth, bead-free, and randomly oriented CUR/CUR@MSNs-NFs displayed a combination of initial rapid discharge and sustained release for CUR, which led to higher cytotoxicity, lower migration as well as a more pronounced effect on apoptosis induction than CUR-NFs and CUR@MSNs-NFs. The present study illustrated that the dual drug release mechanisms through MSN/NF-mediated drug delivery systems might have a highly hopeful application as a localized implantable scaffold for potential postoperative breast cancer therapy.

Current Trends in Drug Delivery System of Curcumin and its Therapeutic Applications

Curcumin is a poly phenolic compound extracted from turmeric. Over the past years, it has acquired significant interest among researchers due to its numerous pharmacological activities like anti- cancer, anti-alzheimer, anti-diabetic, anti-bacterial, anti-inflammatory and so on. However, the clinical use of curcumin is still obstructed due to tremendously poor bioavailability, rapid metabolism, lower gastrointestinal absorption, and low permeability through cell that makes its pharmacology thrilling. These issues have led to enormous surge of investigation to develop curcumin nano formulations which can overcome these restrictive causes. The scientists all across the universe are working on designing several drug delivery systems viz. liposomes, micelles, magnetic nano carriers, etc. for curcumin and its composites which not only improve its physiochemical properties but also enhanced its therapeutic applications. The review aims to systematically examine the treasure of information about the medicinal use of curcumin. This article delivers a general idea of the current study piloted to overwhelm the complications with the bioavailability of curcumin which have exhibited an enhanced biological activity than curcumin. This article explains the latest and detailed study of curcumin and its conjugates, its phytochemistry and biological perspectives and also proved curcumin as an efficient drug candidate for the treatment of numerous diseases. Recent advancements and futuristic viewpoints are also deliberated, which shall help researchers and foster commercial translations of improved nanosized curcumin combination for the treatment of various diseases.

Delivery of Natural Agents by Means of Mesoporous Silica Nanospheres as a Promising Anticancer Strategy

Natural prodrugs derived from different natural origins (e.g., medicinal plants, microbes, animals) have a long history in traditional medicine. They exhibit a broad range of pharmacological activities, including anticancer effects in vitro and in vivo. They have potential as safe, cost-effective treatments with few side effects, but are lacking in solubility, bioavailability, specific targeting and have short half-lives. These are barriers to clinical application. Nanomedicine has the potential to offer solutions to circumvent these limitations and allow the use of natural pro-drugs in cancer therapy. Mesoporous silica nanoparticles (MSNs) of various morphology have attracted considerable attention in the search for targeted drug delivery systems. MSNs are characterized by chemical stability, easy synthesis and functionalization, large surface area, tunable pore sizes and volumes, good biocompatibility, controlled drug release under different conditions, and high drug-loading capacity, enabling multifunctional purposes. In vivo pre-clinical evaluations, a significant majority of results indicate the safety profile of MSNs if they are synthesized in an optimized way. Here, we present an overview of synthesis methods, possible surface functionalization, cellular uptake, biodistribution, toxicity, loading strategies, delivery designs with controlled release, and cancer targeting and discuss the future of anticancer nanotechnology-based natural prodrug delivery systems.

Highly Enhanced Curcumin Delivery Applying Association Type Nanostructures of Block Copolymers, Cyclodextrins and Polycyclodextrins

The limited bioavailability of the highly hydrophobic natural compound, curcumin with wide range of beneficial bioactivity is still a challenge. Self-association type systems of polyethylene oxide-polypropylene oxide-polyethylene oxide block copolymers (Pluronic) were applied to enhance the aqueous solubility of curcumin. Comparison of four Pluronics (94, 105, 127,108) with different compositions led to the conclusion that solubilization capacity is maximum for Pluronic 105 with intermediate polarity (hydrophilic/lipophilic balance (HLB) = 15) possessing the optimum balance between capacity of hydrophobic core of the micelle and hydrophilic stabilizing shell of the associate. Curcumin concentration in aqueous solution was managed to increase 105 times up to 1-3 g/L applying Pluronic at 0.01 mol/L. Formation of a host-guest complex of cyclodextrin as another way of increasing the curcumin solubility was also tested. Comparing the(2-hydroxypropyl)-α, β and γ cyclodextrins (CD) with 6, 7 and 8 sugar units and their polymers (poly-α-CD, poly-β-CD, poly-γ-CD) the γ-CD with the largest cavity found to be the most effective in curcumin encapsulation approaching the g/L range of concentration. The polymer type of the CDs presented prolonged and pH dependent release of curcumin in the gastrointestinal (GI) system modelled by simulated liquids. This retarding effect of polyCD was also shown and can be used for tuning in the combined system of Pluronic micelle and polyCD where the curcumin release was slower than from the micelle.

Chitosan-based Colloidal Polyelectrolyte Complexes for Drug Delivery: A Review

Polyelectrolyte complexes (PECs) as safe drug delivery carriers, are spontaneously formed by mixing the oppositely charged polyelectrolyte solutions in water without using organic solvents nor chemical cross-linker or surfactant. Intensifying attentions on the PECs study are aroused in academia and industry since the fabrication process of PECs is mild and they are ideal vectors for the delivery of susceptible drugs and macromolecules. Chitosan as the unique natural cationic polysaccharide, is a good bioadhesive material. Besides, due to its excellent biocompatibility, biodegradability, abundant availability and hydrophilic nature, chitosan-based PECs have been extensively applied for drug delivery, particularly after administration through mucosal and parenteral routes. The purpose of this review is to compile the recent advances on the biomedical applications of chitosan-based PECs, with specific focuses on the mucosal delivery, cancer therapy, gene delivery and anti-HIV therapy. The challenges and the perspectives of the chitosan-based PECs are briefly commented as well.

Therapeutic Potential of Polymer-Coated Mesoporous Silica Nanoparticles

Mesoporous silica nanoparticles (MSNs) find tremendous applications in drug delivery due to several advantages such as their easy fabrication process, high drug loading, biodegradability, biocompatibility, and so forth. Nevertheless, despite several advantages, the use of this striking drug delivery carrier is restricted due to premature drug release owing to the porous structure. Coating of the pores using polymers has emerged as a great solution to this problem. Polymer coatings, which act as gatekeepers, avoid the premature release of loaded content from MSNs and offers the opportunity for controlled and targeted drug delivery. Therefore, in this review, we have compiled the polymer-based coating approaches used in recent years for improving the drug delivery capability of MSNs. This manuscript provides an insight into the research about the potential of polymer-coated MSNs, allowing the selection of right polymer for coating purposes according to the desired application.