Drug-loaded polymeric films as a promising tool for the treatment of periodontitis

Moxifloxacin HCl -loaded Cellulose Acetate Butylate In Situ Forming Gel for Periodontitis Treatment

Periodontitis presents significant treatment challenges due to its complexity and potential complications. In response, an in situ forming gel (ISG) loaded with moxifloxacin HCl (Mx) and cellulose acetate butyrate (CAB) was developed for targeted periodontitis therapy. Mx-loaded 10-45% CAB-based ISGs were developed, and their physicochemical properties such as rheology, viscosity, contact angle, gel morphology and gel formation, interface interaction were investigated. Moreover, the formulation performance studies including drug release and kinetics, in vitro degradation, and antimicrobial activities were also evaluated. The Mx-loaded ISGs containing 25-45% CAB demonstrated rapid matrix formation in both macroscopic and microscopic examinations and presented plastic deformation matrix. Tracking with sodium fluorescein and Nile red fluorescence probes indicated delayed solvent movement owing to CAB matrix formation. Adequate CAB content sustained Mx release for one week, following Peppas-Sahlin model and indicating a predominantly Fickian diffusion mechanism. Higher CAB content likely contributed to a denser matrix structure, leading to a slower in vitro degradation rate. Synchrotron radiation X-ray tomographic and SEM imaging provided insights into the CAB matrix structure and porous network formation. These ISG formulations effectively inhibited Staphylococcus aureus, Escherichia coli, Candida albicans, and Porphyromonas gingivalis. The Mx-loaded 40% CAB-based ISG shows promise as a dosage form for treating periodontitis. Further clinical trials are necessary to ensure the safety of this new ISG formulation, despite existing safety data for other medicinal uses of CAB. HIGHLIGHTS: Moxifloxacin HCl-loaded 10-45% cellulose acetate butyrate (CAB)-based in situ forming gels (ISG) were developed. They were evaluated for physicochemical properties, drug release, in vitro degradation, and antimicrobial activities. ISGs with 25-45% CAB showed swift matrix formation and plastic deformation Adequate CAB content sustained Mx release with Fickian diffusion mechanism They promise for periodontitis treatment because of effective inhibition of related pathogens.

Topical Biocomposites Based on Collagen, Hyaluronic Acid and Metronidazole as Periodontitis Treatment

BACKGROUND

It is well known that periodontitis affects the gums and surrounding connective tissue. The chronic inflammatory response induced by bacteria in the gingival tissue leads to the loss of the collagen connection between the tooth and the bone and ultimately to bone loss.

METHODS

In this context, the aim of this research was the obtaining and characterization of a drug release supports in the form of sponges based on collagen, hyaluronic acid as a support and metronidazole as an antibiotic for the treatment of periodontitis. The sponges were characterized by FT-IR spectroscopy, water uptake, contact angle, SEM microscopy, in vitro metronidazole release analysis from sponges and data modeling.

RESULTS

The results showed that all the sponges had a porous structure with interconnected pores, the pore sizes being influenced by hyaluronic acid and metronidazole; the spongious structure became much more dense for samples with metronidazole content. All metronidazole-loaded sponges showed good surface wettability and an adequate swelling capacity for a suitable antimicrobial release at the periodontal pocket. The porous structures allow a controlled release, fast in the first hour, essential to control the initial microbial load at the periodontal level, which continues slowly in the following hours to ensure an effective treatment of periodontitis.

CONCLUSIONS

Correlating all physical-chemical and bio-pharmaceutical results obtained, a promising solution for periodontitis treatment could be a met-ronidazole-collagen-hyaluronic system consisting of 1% collagen, 1.5% metronidazole and 0.8% hyaluronic acid, and in vitro and in vivo tests are recommended to continue studies.

Metronidazole Modified-Release Therapy Using Two Different Polymeric Systems Gels or Films: Clinical Study for the Treatment of Periodontitis

This study evaluated the efficacy of semisolid systems (gels) and films containing a combination of metronidazole (MTZ) and metronidazole benzoate after scaling and root-planing (SRP) for periodontitis. In total, 45 patients with stage I or II periodontitis were enrolled and divided into 3 groups: 1-SRP-control; 2-SRP + Film with MTZ; 3-SRP + Gel with MTZ. The pH of gingival crevicular fluid (GCF) before/after treatments, MTZ concentrations, and drug release using high-performance liquid chromatography were investigated. The effects were evaluated by longitudinal monitoring of clinical parameters (probing depth-PD, clinical attachment level-CAL, and bleeding on probing-BP). MTZ and MTZ-benzoate concentrations in the periodontal pocket and pH showed no statistical difference after application. SRP + Gel presented the lowest CAL values. For SRP + Film and SRP + Gel, higher PD values were observed at T0 compared to all groups. A relevant reduction in BP was observed in SRP + Film and SRP + Gel groups at all times compared to T0. Both therapies improved periodontal health compared to SRP alone, reducing PD and BP, and increasing CAL for the gel group, suggesting they are promising for periodontal disease treatment.

Iron Nano Biocomposite-Infused Biopolymeric Films: A Multifunctional Approach for Robust Skin Repair

Sodium alginate (SA) biopolymeric films have various limitations such as poor mechanical properties, high vapor permeability, lack of antibacterial activity, excessive burst release, and weak cell adhesion. To overcome these limitations, a strategy involving the integration of nanofillers into an SA film matrix is explored. In this context, a cost-effective iron-containing carbon nano biocomposite (FeCNB) nanofiller is developed using a solvent-free technique. This nanocomposite is successfully incorporated into the alginate film matrix at varying concentrations (0.05, 0.1, and 0.15%) aimed at enhancing its physicochemical and biological properties for biomedical applications. Characterization through FESEM and BET analyses confirms the porous nature of the FeCNB. EDX shows the FeCNB's uniform distribution upon its integration into the film matrix, albeit without strong chemical interaction with SA. Instead, hydrogen bonding interactions become apparent in the FTIR spectra. By incorporating the FeCNB, the mechanical attributes of the films are improved and the water vapor permeability approaches the desired range (2000-2500 g/m2day). The film's swelling ratio reduction contributes to a decrease in water permeability. The antibacterial activity and sustained release property of the FeCNB-incorporated film are established using tetracycline hydrochloride (TCl), a model drug. The drug release profile resembled Korsmeyer-Peppas's release pattern. In vitro assessments via the MTT assay and scratch assay on NIH-3T3 cells reveal that FeCNB has no adverse effects on the biocompatibility of alginate films. The cell proliferation and adhesion to the SA film are significantly enhanced after infusion of the FeCNB. The in vivo study performed on the rat model demonstrates improved wound healing by FeCNB-impregnated films. Based on the comprehensive findings, the proposed FeCNB-incorporated alginate films prove to be a promising candidate for robust skin repair.

PVA/Chitosan Thin Films Containing Silver Nanoparticles and Ibuprofen for the Treatment of Periodontal Disease

Local delivery of drugs or antimicrobial agents is a suitable approach in the management of periodontitis when the infection is localized deep in the pockets and does not adequately respond to mechanical debridement and/or systemic antibiotic treatment. In this context, the objective of this study was to prepare new biocomposite films with antimicrobial, anti-inflammatory, and good mechanical properties to be applied in periodontal pockets. The composite film is eco-friendly synthesized from poly(vinyl alcohol) (PVA) cross-linked with oxidized chitosan (OxCS). Silver nanoparticles (AgNps) were inserted during film synthesis by adding freshly chitosan-capped AgNps colloidal solution to the polymer mixture; the addition of AgNps up to 1.44 wt.% improves the physico-chemical properties of the film. The characterization of the films was performed by FT-IR, atomic mass spectrometry, X-ray spectroscopy, and SEM. The films displayed a high swelling ratio (162%), suitable strength (1.46 MPa), and excellent mucoadhesive properties (0.6 N). Then, ibuprofen (IBF) was incorporated within the best film formulation, and the IBF-loaded PVA/OxCS-Ag films could deliver the drug in a sustained manner up to 72 h. The biocomposite films have good antimicrobial properties against representative pathogens for oral cavities. Moreover, the films are biocompatible, as demonstrated by in vitro tests on HDFa cell lines.

Drug release kinetics and biological properties of a novel local drug carrier system

Background:

The purpose of this in vitro study was to investigate drug release kinetics and cytotoxicity of a novel drug delivery system for treatment of periodontitis.

Materials and Methods:

This in vitro study addresses the fabrication of a polycaprolactone/alginic acid-based polymeric film loaded with metronidazole, as a basic drug in the treatment of periodontal diseases. Films were prepared by solvent casting technique. Four formulations with different percentages of drug by weight (3%, 5%, 9%, and 13%) were prepared. Drug release kinetics were investigated using ultraviolet–visible spectroscopy during (one week). Data were analyzed using repeated measures ANOVA. Cytotoxicity of drug-loaded system extracts was evaluated by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay using L929 cells after 24-h incubation. The results were evaluated according to ISO standard 10993-5 and assessed using ANOVA and Tukey's tests at a significance level of P < 0.05.

Results:

All polymeric films showed a burst drug release followed by a gradual release. Drug release data were fitted well with the first-order kinetic model in all drug-containing formulations indicating that drug release is a fraction of remaining drug in the matrix. Drug release is mainly driven by diffusion of medium into the composite matrix. 3%wt metronidazole-containing formulation exhibited the best MTT result.

Conclusion:

The findings of this study supported the synthesis of drug-loaded periodontal films with 3% metronidazole due to better biological properties along with the ability of acceptable drug release to eradicate anaerobic periodontal bacteria.

A Novel Method for Preparation of Carrageenan/Fish Scale Collagen/Allopurinol Biocomposite Film

Biopolymers such as carrageenan or collagen can be used as carriers for loading a drug to enhance a drug’s bioavailability. In this work, allopurinol was loaded on a carrageenan/collagen blend and the carrageenan/collagen/allopurinol (CCA) biocomposite films were prepared using the ionic gelation method combined with the 3D printing method using carrageenan/collagen/allopurinol gel as a 3D printing ink material. The advantages of the 3D printing method are the ease in shaping the design of films and the ease in controlling the thickness of films. The results of infrared (IR) spectroscopy and field emission scanning electron microscopy (FESEM) analyses showed that the CCA biocomposite films have a regular structure, and the functional groups of components in the biocomposites can interact with each other. After 30 minutes of immersion in distilled water and pH buffer solution, the biocomposite films swelled and disintegrated. The carrageenan/collagen blend can control the release of allopurinol in simulated body fluids. In addition, the drug release kinetic models reflecting the release process of allopurinol from CCA biocomposite films in simulated body fluids have also been calculated.

Polysaccharide-Based Drug Delivery Systems for the Treatment of Periodontitis

Periodontal diseases are worldwide health problems that negatively affect the lifestyle of many people. The long-term effect of the classical treatments, including the mechanical removal of bacterial plaque, is not effective enough, causing the scientific world to find other alternatives. Polymer-drug systems, which have different forms of presentation, chosen depending on the nature of the disease, the mode of administration, the type of polymer used, etc., have become very promising. Hydrogels, for example (in the form of films, micro-/nanoparticles, implants, inserts, etc.), contain the drug included, encapsulated, or adsorbed on the surface. Biologically active compounds can also be associated directly with the polymer chains by covalent or ionic binding (polymer-drug conjugates). Not just any polymer can be used as a support for drug combination due to the constraints imposed by the fact that the system works inside the body. Biopolymers, especially polysaccharides and their derivatives and to a lesser extent proteins, are preferred for this purpose. This paper aims to review in detail the biopolymer-drug systems that have emerged in the last decade as alternatives to the classical treatment of periodontal disease.

Formulation and Optimization of Sodium Alginate Polymer Film as a Buccal Mucoadhesive Drug Delivery System Containing Cetirizine Dihydrochloride

Currently, pharmaceutical companies are working on innovative methods, processes and products. Oral mucoadhesive systems, such as tablets, gels, and polymer films, are among these possible products. Oral mucoadhesive systems possess many advantages, including the possibility to be applied in swallowing problems. The present study focused on formulating buccal mucoadhesive polymer films and investigating the physical and physical–chemical properties of films. Sodium alginate (SA) and hydroxypropyl methylcellulose (HPMC) were used as film-forming agents, glycerol (GLY) was added as a plasticizer, and cetirizine dihydrochloride (CTZ) was used as an active pharmaceutical ingredient (API). The polymer films were prepared at room temperature with the solvent casting method by mixed two-level and three-level factorial designs. The thickness, tensile strength (hardness), mucoadhesivity, surface free energy (SFE), FTIR, and Raman spectra, as well as the dissolution of the prepared films, were investigated. The investigations showed that GLY can reduce the mucoadhesivity of films, and CTZ can increase the tensile strength of films. The distribution of CTZ proved to be homogeneous in the films. The API could dissolve completely from all the films. We can conclude that polymer films with 1% and 3% GLY concentrations are appropriate to be formulated for application on the buccal mucosa as a drug delivery system.