Dual-functional melatonin releasing device loaded with PLGA microparticles and cyclodextrin inclusion complex for osteosarcoma therapy

Functional anti-bone tumor biomaterial scaffold: construction and application

Bone tumors, including primary bone tumors and bone metastases, have been plagued by poor prognosis for decades. Although most tumor tissue is removed, clinicians are still confronted with the dilemma of eliminating residual cancer cells and regenerating defective bone tissue after surgery. Therefore, functional biomaterial scaffolds are considered to be the ideal candidates to bridge defective tissues and restrain cancer recurrence. Through functionalized structural modifications or coupled therapeutic agents, they provide sufficient mechanical strength and osteoinductive effects while eliminating cancer cells. Numerous novel approaches such as photodynamic, photothermal, drug-conjugated, and immune adjuvant-assisted therapies have exhibited remarkable efficacy against tumors while exhibiting low immunogenicity. This review summarizes the progress of research on biomaterial scaffolds based on different functionalization strategies in bone tumors. We also discuss the feasibility and advantages of the combined application of multiple functionalization strategies. Finally, potential obstacles to the clinical translation of anti-tumor bone bioscaffolds are highlighted. This review will provide valuable references for future advanced biomaterial scaffold design and clinical bone tumor therapy.

Advanced nanoscale drug delivery systems for bone cancer therapy

Bone tumors are relatively rare, which are complex cancers and mostly involve the long bones and pelvis. Bone cancer is mainly categorized into osteosarcoma (OS), chondrosarcoma, and Ewing sarcoma. Of these, OS is the most intimidating cancer of the bone tissue, which is mostly found in the log bones in young children and older adults. Conspicuously, the current chemotherapy modalities used for the treatment of OS often fail mainly due to (i) the non-specific detrimental effects on normal healthy cells/tissues, (ii) the possible emergence of drug resistance mechanisms by cancer cells, and (iii) difficulty in the efficient delivery of anticancer drugs to the target cells. To impose the maximal therapeutic impacts on cancerous cells, it is of paramount necessity to specifically deliver chemotherapeutic agents to the tumor site and target the diseased cells using advanced nanoscale multifunctional drug delivery systems (DDSs) developed using organic and inorganic nanosystems. In this review, we provide deep insights into the development of various DDSs applied in targeting and eradicating OS. We elaborate on different DDSs developed using biomaterials, including chitosan, collagen, poly(lactic acid), poly(lactic-co-glycolic acid), polycaprolactone, poly(ethylene glycol), polyvinyl alcohol, polyethyleneimine, quantum dots, polypeptide, lipid NPs, and exosomes. We also discuss DDSs established using inorganic nanoscale materials such as magnetic NPs, gold, zinc, titanium NPs, ceramic materials, silica, silver NPs, and platinum NPs. We further highlight anticancer drugs' role in bone cancer therapy and the biocompatibility of nanocarriers for OS treatment.

Microparticles in the Development and Improvement of Pharmaceutical Formulations: An Analysis of In Vitro and In Vivo Studies

Microparticulate systems such as microparticles, microspheres, microcapsules or any particle in a micrometer scale (usually of 1–1000 µm) are widely used as drug delivery systems, because they offer higher therapeutic and diagnostic performance compared to conventional drug delivery forms. These systems can be manufactured with many raw materials, especially polymers, most of which have been effective in improving the physicochemical properties and biological activities of active compounds. This review will focus on the in vivo and in vitro application in the last decade (2012 to 2022) of different active pharmaceutical ingredients microencapsulated in polymeric or lipid matrices, the main formulation factors (excipients and techniques) and mostly their biological activities, with the aim of introducing and discussing the potential applicability of microparticulate systems in the pharmaceutical field.

Chitosan-based biomaterials for the treatment of bone disorders

Bone is an alive and dynamic organ that is well-differentiated and originated from mesenchymal tissues. Bone undergoes continuous remodeling during the lifetime of an individual. Although knowledge regarding bones and their disorders has been constantly growing, much attention has been devoted to effective treatments that can be used, both from materials and medical performance points of view. Polymers derived from natural sources, for example polysaccharides, are generally biocompatible and are therefore considered excellent candidates for various biomedical applications. This review outlines the development of chitosan-based biomaterials for the treatment of bone disorders including bone fracture, osteoporosis, osteoarthritis, arthritis rheumatoid, and osteosarcoma. Different examples of chitosan-based formulations in the form of gels, micro/nanoparticles, and films are discussed herein. The work also reviews recent patents and important developments related to the use of chitosan in the treatment of bone disorders. Although most of the cited research was accomplished before reaching the clinical application level, this manuscript summarizes the latest achievements within chitosan-based biomaterials used for the treatment of bone disorders and provides perspectives for future scientific activities.

Exploring In Vitro Biological Cellular Responses of Pegylated β-Cyclodextrins

βCDPEG5 and βCDPEG2 are two derivatives comprising seven PEG linear chains of 5 and 2 kDa, respectively, conjugated to βCD. As βCDPEGs display different physicochemical properties than their precursors, they could also trigger distinct cellular responses. To investigate the biological behavior of βCDPEGs in comparison to their parent compounds, we performed broad toxicological assays on RAW 264.7 macrophages, MC3T3-E1 osteoblasts, and MDCK cells. By analyzing ROS and NO₂⁻ overproduction in macrophages, we found that βCDPEGs induced a moderate stress response without affecting cell viability. Although MC3T3-E1 osteoblasts were more sensitive than MDCK cells to βCDPEGs and the parent compounds, a similar pattern was observed: the effect of βCDPEG5 on cell viability and cell cycle progression was larger than that of βCDPEG2; PEG2 affected cell viability and cell cycle more than βCDPEG2; cell post-treatment recovery was favorable in all cases, and the compounds had similar behaviors regarding ROS generation. The effect on MDCK cell migration followed a similar pattern. In contrast, for osteoblasts, the interference of βCDPEG5 with cell migration was smaller than that of βCDPEG2; likewise, the effect of PEG2 was shorter than its conjugate. Overall, the covalent conjugation of βCD and PEGs, particularly to yield βCDPEG2, improved the biocompatibility profile, evidencing that a favorable biological response can be tuned through a thoughtful combination of materials. Moreover, this is the first time that an in vitro evaluation of βCD and PEG has been presented for MC3T3-E1 and MDCK cells, thus providing valuable knowledge for designing biocompatible nanomaterials constructed from βCD and PEGs.

Protective effect of melatonin entrapped PLGA nanoparticles on radiation-induced lung injury through the miR-21/TGF-β1/Smad3 pathway

Radiation-induced lung injury (RILI) is a complication commonly found in victims suffering from nuclear accidents and patients treated with chest tumor radiotherapy, and drugs are limited for effective prevention and treatment. Melatonin (MET) has an anti-radiation effect, but its metabolic period in the body is short. In order to prolong the metabolism period of MET, we prepared MET entrapped poly (lactic-co-glycolic acid) nanoparticles (MET/PLGANPS) for the treatment of RILI. As a result, the release rate of MET/PLGANPS in vitro was lower than MET, with stable physical properties, and it caused no changes in histopathology and biochemical indicators. After 2 weeks and 16 weeks of irradiation with the dose of 15 Gy, MET and MET/PLGANPS could reduce the expression of caspase-3 proteins, inflammatory factors, TGF-β1 and Smad3 to alleviate radiation-induced lung injury. MET/PLGANPS showed better therapeutic effect on RILI than MET. In addition, we also found that high expression of miR-21 could increase the expression levels of TGF-β1, and inhibit the protective effect of MET/PLGANPS. In conclusion, MET/PLGANPS may alleviate RILI by inhibiting the miR-21/TGF-β1/Smad3 pathway, which would provide a new target for the treatment of radiation-induced lung injury.

Effect of melatonin/BMP-2 co-delivery scaffolds on the osteoclast activity

Bone morphogenetic protein two (BMP-2) has been widely used as an osteoinductive agent in the treatment of bone diseases. However, some side effects, such as osteoclast activation have emerged when it was used at high doses. In this study, by considering the osteoclast-suppressing capability of melatonin (MEL), its effect on osteoclast differentiation induced by BMP-2 was investigated. These two factors, MEL and BMP-2, were embedded into chitosan/hydroxyapatite (HAp) scaffolds that were characterized morphologically by scanning electron microscopy (SEM) and micro-computed tomography (μ-CT). Release profiles of MEL and BMP-2 from scaffolds were determined in vitro and then, the differentiation of RAW 264.7 cells to osteoclasts was investigated on the scaffolds. Results of tartrate-resistant acid phosphatase (TRAP) staining, SEM imaging and expression of cathepsin K gene showed that, in the presence of BMP-2, osteoclast differentiation increased, whereas it decreased in MEL and MEL/BMP-2 embedded scaffolds suggesting that melatonin successfully attenuated osteoclast differentiation induced by BMP-2. Thus, the MEL/BMP-2 loaded chitosan/HAp scaffolds that have dual function in enhancing bone formation and inhibiting osteoclast activity are recommended biomaterials in the field of bone regeneration.

Scaffold-based osteogenic dual delivery system with melatonin and BMP-2 releasing PLGA microparticles

The growing safety problems about the use of bone morphogenetic protein 2 (BMP-2) is one of the recent issues that was improved by using low doses of BMP-2 with the support of other osteoinductive agents and/or using appropriate carriers. The aim of the present study is to investigate the effect of scaffold-based dual release system including melatonin (MEL) and BMP-2 loaded polylactic-co-glycolic acid (PLGA) microparticles on the osteogenic activity of pre-osteoblastic MC3T3-E1 cells. MEL and BMP-2 loaded microparticles were prepared by double emulsion solvent evaporation method in the average diameters of ~2 µm and ~11 µm, respectively and loaded into chitosan/hydroxyapatite (HAp) scaffolds. In vitro MC3T3-E1 culture studies were carried out comparatively with blank scaffolds, single (BMP-2 or MEL) releasing groups and dual (BMP-2 and MEL) releasing group. Microscopic observations and hematoxylin/eosin staining showed enhanced number of cells and dense ECM in dual release group. The expressions of differentiation markers, Runt-related transcription factor 2 (RUNX2) and alkaline phosphatase (ALP) and also mineralization were higher in dual release group than that of the other groups. Our findings showed that BMP-2 at low doses (~20 ng per scaffold) was sufficient in terms of osteogenic activity with controlled release systems where it was used in combination with MEL (~10 µg per scaffold).

Recent advances in the formulation of PLGA microparticles for controlled drug delivery

Polymeric microparticles (MPs) are recognized as very popular carriers to increase the bioavailability and bio-distribution of both lipophilic and hydrophilic drugs. Among different kinds of polymers, poly-(lactic-co-glycolic acid) (PLGA) is one of the most accepted materials for this purpose, because of its biodegradability (due to the presence of ester linkages that are degraded by hydrolysis in aqueous environments) and safety (PLGA is a Food and Drug Administration (FDA)-approved compound). Moreover, its biodegradability depends on the number of glycolide units present in the structure, indeed, lower glycol content results in an increased degradation time and conversely a higher monomer unit number results in a decreased time. Due to this feature, it is possible to design and fabricate MPs with a programmable and time-controlled drug release. Many approaches and procedures can be used to prepare MPs. The chosen fabrication methodology influences size, stability, entrapment efficiency, and MPs release kinetics. For example, lipophilic drugs as chemotherapeutic agents (doxorubicin), anti-inflammatory non-steroidal (indomethacin), and nutraceuticals (curcumin) were successfully encapsulated in MPs prepared by single emulsion technique, while water-soluble compounds, such as aptamer, peptides and proteins, involved the use of double emulsion systems to provide a hydrophilic compartment and prevent molecular degradation. The purpose of this review is to provide an overview about the preparation and characterization of drug-loaded PLGA MPs obtained by single, double emulsion and microfluidic techniques, and their current applications in the pharmaceutical industry.Graphic abstract.