Development of dental implant coating with minocycline-loaded niosome for antibacterial application

The Integration of Advanced Drug Delivery Systems into Conventional Adjuvant Therapies for Peri-Implantitis Treatment

Despite the high success rates of dental implants, peri-implantitis is currently the most common complication in dental implantology. Peri-implantitis has an inflammatory nature, it is associated with the accumulation of plaque in the peri-implant tissues, and its evolution can be progressive depending on various factors, comorbidities, and poor oral health. Prophylaxis and different treatment methods have been widely discussed in recent decades, and surgical and non-surgical techniques present both advantages and disadvantages. In this work, a literature review of different studies on the application of adjuvant treatments, such as local and systemic antibiotics and antiseptic treatments, was conducted. Positive outcomes have been found in the short (up to one year after treatment) and long term (up to ten years after treatment) with combined therapies. However, there is still a need to explore new therapies based on the use of advanced drug delivery systems for the effective treatment of peri-implantitis in the long term and without relapses. Hence, micro- and nanoparticles, implants, and injectable hydrogels, among others, should be considered in future peri-implantitis treatment with the aim of enhancing overall therapy outcomes.

Niosome as a promising tool for increasing the effectiveness of anti-inflammatory compounds

Niosomes are drug delivery systems with widespread applications in pharmaceutical research and the cosmetic industry. Niosomes are vesicles of one or more bilayers made of non-ionic surfactants, cholesterol, and charge inducers. Because of their bilayer characteristics, similar to liposomes, niosomes can be loaded with lipophilic and hydrophilic cargos. Therefore, they are more stable and cheaper in preparation than liposomes. They can be classified into four categories according to their sizes and structures, namely small unilamellar vesicles (SUVs), large unilamellar vesicles (LUVs,), multilamellar vesicles (MLVs), and multivesicular vesicles (MVVs). There are many methods for niosome preparation, such as thin-film hydration, solvent injection, and heating method. The current study focuses on the preparation methods and pharmacological effects of niosomes loaded with natural and chemical anti-inflammatory compounds in kinds of literature during the past decade. We found that most research was carried out to load anti-inflammatory agents like non-steroidal anti-inflammatory drugs (NSAIDs) into niosome vesicles. The studies revealed that niosomes could improve anti-inflammatory agents' physicochemical properties, including solubility, cellular uptake, stability, encapsulation, drug release and liberation, efficiency, and oral bioavailability or topical absorption. See also the graphical abstract(Fig. 1).

Overview of strategies to improve the antibacterial property of dental implants

The increasing number of peri-implant diseases and the unsatisfactory results of conventional treatment are causing great concern to patients and medical staff. The effective removal of plaque which is one of the key causes of peri-implant disease from the surface of implants has become one of the main problems to be solved urgently in the field of peri-implant disease prevention and treatment. In recent years, with the advancement of materials science and pharmacology, a lot of research has been conducted to enhance the implant antimicrobial properties, including the addition of antimicrobial coatings on the implant surface, the adjustment of implant surface topography, and the development of new implant materials, and significant progress has been made in various aspects. Antimicrobial materials have shown promising applications in the prevention of peri-implant diseases, but meanwhile, there are some shortcomings, which leads to the lack of clinical widespread use of antimicrobial materials. This paper summarizes the research on antimicrobial materials applied to implants in recent years and presents an outlook on the future development.

Antibiotic impregnation and nanocoating of external ventricular drainage catheters for antibacterial applications: Evaluation of in vitro studies and molecular docking

The most suitable method to treat hydrocephalus disease is to insert a shunt catheter that drains the cerebral spinal fluid (CSF); however, shunt implantation is often associated with various bacterial infections. In this study, antibiotic-loaded nanospheres were prepared using the solvent evaporation technique and coated on an antibiotic-impregnated shunt surface to promote shunt antibacterial properties. Clindamycin (CDM) and rifampicin (RIF) were in combination loaded in a single nanosphere, whereas trimethoprim (TMP) was loaded individually in triblock copolymers [(d,l-lactide-random-ε-caprolactone)-block-poly(ethylene glycol)-block-(d,l-lactide-random-ε-caprolactone)] (PLEC). The drug-loading content, encapsulation efficiency, yield, size, and zeta potential of the antibiotic-loaded nanospheres were measured. The results showed that the drug-loading content of clindamycin- and rifampicin-loaded nanospheres (CDM/RIF-NPs) was approximately 3% and 8%, respectively, at a drug to polymer ratio of 1:2. In addition, trimethoprim-loaded nanospheres (TMP-NPs) showed nearly 7% drug loading at equal drug and polymer ratios. The amount of drug release was determined before and after the coating of nanospheres on the shunt surface. In addition, in silico molecular docking studies indicated the good chemical interaction of these antibiotics with PLEC, and the results were consistent with those of impregnation studies. Antibacterial tests of coated external ventricular drainage showed antibacterial activity for up to 21 days.

Nanomaterials: an intra-periodontal pocket drug-delivery system for periodontitis

Periodontitis is a microbiological condition that affects the tissues supporting the teeth. The fundamental to effective periodontal therapy is choosing the suitable antimicrobial and anti-inflammatory agent, together with the proper route of drug administration and delivery system. Intra-periodontal pocket approach with nano drug-delivery systems (NDDS) such as polymeric nanoparticles, gold nanoparticles, silica nanoparticles, magnetic nanoparticles, liposomes, polymersomes, exosomes, nano micelles, niosome, solid lipid nanoparticles, nano lipid carriers, nanocomposites, nanogels, nanofibers, scaffolds, dendrimers, quantum dots, etc., will be appropriate route of drug administration and delivery system. This NDDS delivers the drugs at the site of infection to inhibit growth and promote tissue regeneration. The present review focused on providing comprehensive information on the NDDS for periodontitis, which enhanced therapeutic outcomes via intra-periodontal pocket delivery.

Antibacterial and biocompatibility studies of triple antibiotics-impregnated external ventricular drainage: In vitro and in vivo evaluation

Hydrocephalus is a neurological disease caused by an unusually high level of cerebrospinal fluid (CSF), which can be relieved by external ventricular drainage (EVD) insertion. However, the infection can lead to complications during the use of EVD. In this study, EVD was impregnated with three synergistic antibiotics, including rifampicin, clindamycin, and trimethoprim, to improve the antibacterial property. The impregnated drainage was studied for its characteristics in vitro and in vivo. Drug loading determination revealed that rifampicin had the highest concentration in the tube, followed by clindamycin and trimethoprim, respectively. In vitro cytotoxicity and hemolytic studies showed no toxic effects from antibiotics-impregnated EVD on fibroblast and red blood cells. For antibacterial testing, the impregnated EVD exhibited antibacterial activity against Staphylococcus aureus MRSA and Staphylococcus epidermidis up to 14 and 90 days, respectively. Moreover, biocompatibility and drug release into the bloodstream and surrounding tissues were investigated by implantation in rabbits for 30 days. Histology and morphology results showed that fibroblast cells began to adhere to the drainage surface and inflammatory cell numbers were noticeably small after the long-term implantation. In addition, there was no drug leakage to the bloodstream and surrounding tissues. Hence, this impregnated EVD can potentially be used for antibacterial application.

Antibacterial Electrodeposited Copper-Doped Calcium Phosphate Coatings for Dental Implants

Dental implants provide a good solution for the replacement of tooth roots. However, the full restoration of tooth functions relies on the bone-healing period before positioning the abutment and the crown on the implant, with the associated risk of post-operative infection. This study aimed at developing a homogeneous and adherent thin calcium phosphate antibacterial coating on titanium dental implants by electrodeposition to favor both implant osseointegration and to limit peri-implantitis. By combining global (XRD, FTIR-ATR, elemental titration) and local (SEM, Raman spectroscopy on the coating surface and thickness) characterization techniques, we determined the effect of electrodeposition time on the characteristics and phases content of the coating and the associated mechanism of its formation. The 1-min-electrodeposited CaP coating (thickness: 2 ± 1 μm) was mainly composed of nano-needles of octacalcium phosphate. We demonstrated its mechanical stability after screwing and unscrewing the dental implant in an artificial jawbone. Then, we showed that we can reach a high copper incorporation rate (up to a 27% Cu/(Cu+Ca) molar ratio) in this CaP coating by using an ionic exchange post-treatment with copper nitrate solution at different concentrations. The biological properties (antibiofilm activity and cytotoxicity) were tested in vitro using a model of mixed bacteria biofilm mimicking peri-implantitis and the EN 10993-5 standard (direct contact), respectively. An efficient copper-doping dose was determined, providing an antibiofilm property to the coating without cytotoxic side effects. By combining the electrodeposition and copper ionic exchange processes, we can develop an antibiofilm calcium phosphate coating on dental implants with a tunable thickness and phases content.

Additive Manufacturing of Drug-Eluting Multilayer Biodegradable Films

Drug-eluting films made of bioresorbable polymers are a widely used tool of modern personalized medicine. However, most currently existing methods of producing coatings do not go beyond the laboratory, as they have low encapsulation efficiency and/or difficulties in scaling up. The PLACE (Printed Layered Adjustable Cargo Encapsulation) technology proposed in this article uses an additive approach for film manufacturing. PLACE technology is accessible, scalable, and reproducible in any laboratory. As a demonstration of the technology capabilities, we fabricated layered drug-eluting polyglycolic acid films containing different concentrations of Cefazolin antibiotic. The influence of the amount of loaded drug component on the film production process and the release kinetics was studied. The specific loading of drugs was significantly increased to 200-400 µg/cm² while maintaining the uniform release of Cefazolin antibiotic in a dosage sufficient for local antimicrobial therapy for 14 days. The fact that the further increase in the drug amount results in the crystallization of a substance, which can lead to specific defects in the cover film formation and accelerated one-week cargo release, was also shown, and options for further technology development were proposed.

Development of Nanoemulsions for Wound Dressings Containing Cassia alata L. Leaf Extraction

Natural polymer-based hydrogel films possess considerable potential for use in biomedical applications and are excellent for wound healing. The purpose of this research was to use ionic crosslinking to improve the mechanical characteristics, absorption of fluid in the wound, and drug release behavior of Cassia alata L. (CA) extract loaded niosomes (CANs) that were incorporated in an alginate-pectin film (A/P). Then, chemically crosslinked A/P hydrogels were obtained by immersing them in different concentrations of calcium chloride (CaCl₂) (0.5–1% w/v) for 15–120 s. The degree of crosslinking was controlled by both contact time and CaCl₂ concentration. The optimal crosslinking conditions were 1% CaCl₂ for 15 seconds. In this study, the following features of the hydrogel films were investigated: physical properties, morphological characteristics, drug loading, in vitro drug release, antibacterial activity, wound healing activity, cytocompatibility profiles, and hemocompatibility. The crosslinked hydrogel films maintained their physical integrity during use, with the 1% film attaining the best results in the shortest period (15 sec). Then, in vitro drug release from the films was examined. Crosslinking was observed to prolong the release of the CA extract from the hydrogel film. Finally, a cell viability experiment was conducted to evaluate the cytotoxicity profile. The A/P composite film exhibited excellent wound dressing qualities and good mechanical properties in preformulation testing. The in vitro drug release profile indicated that the A/P created a regulated drug release profile, and the cell viability experiment revealed that the film was nontoxic and hemocompatible. A/P composite films can be produced using CAN extract as a possible wound dressing. However, further studies in animals and humans are required to determine both safety and effectiveness.

In Vitro Bioactivity and Antibacterial Effects of a Silver-Containing Mesoporous Bioactive Glass Film on the Surface of Titanium Implants

Peri-implantitis is defined as a bacterial infection-induced inflammation and suppuration of soft and hard tissues surrounding a dental implant. If bacteria further invade the alveolar bone, they can easily cause bone loss and even lead to the early failure of a dental implant surgery. In the present study, an 80SiO₂–15CaO–5P₂O₅ mesoporous bioactive glass film system containing 1, 5, and 10 mol% of silver was prepared on titanium implant discs (MBG–Ag–coated Ti) using sol-gel and spin coating methods. The wettability and adhesion strength of the films were evaluated using contact angle measurements and adhesion strength tests, respectively. The phase composition, chemical bonding, morphology, and oxidation states of the films were analyzed via X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and X-ray photoelectron spectroscopy (XPS). In vitro bioactivity analysis of the films was performed by immersion in a simulated body fluid (SBF) for 24 h. Disk diffusion tests were performed on the early colonizing bacteria Aggregatibacter actinomycetemcomitans and Streptococcus mutans to evaluate the antibacterial ability of the films. A silver-containing mesoporous bioactive glass film with excellent biocompatibility and antibacterial properties was successfully prepared.

Lipid-Based Nanovesicular Drug Delivery Systems

In designing a new drug, considering the preferred route of administration, various requirements must be fulfilled. Active molecules pharmacokinetics should be reliable with a valuable drug profile as well as well-tolerated. Over the past 20 years, nanotechnologies have provided alternative and complementary solutions to those of an exclusively pharmaceutical chemical nature since scientists and clinicians invested in the optimization of materials and methods capable of regulating effective drug delivery at the nanometer scale. Among the many drug delivery carriers, lipid nano vesicular ones successfully support clinical candidates approaching such problems as insolubility, biodegradation, and difficulty in overcoming the skin and biological barriers such as the blood-brain one. In this review, the authors discussed the structure, the biochemical composition, and the drug delivery applications of lipid nanovesicular carriers, namely, niosomes, proniosomes, ethosomes, transferosomes, pharmacosomes, ufasomes, phytosomes, catanionic vesicles, and extracellular vesicles.

Pharmaceutical Perspective in Wearable Drug Delivery Systems

Humans have been dealing with health problems for millions of years. Normal health services need well-trained personnel and high-cost diagnostic tests, which forces patients to go to hospitals if medical treatment is required. To address this, prototype testing has been carried out into the wearable drug delivery health care perspectives. Researchers have devised a wide variety of formulations for the treatment of various diseases at home by performing real-time monitoring of different routes of drug administration such as ocular, transdermal, intraoral, intracochlear, and several more. A comprehensive review of the different types of wearable drug delivery systems with respect to their manufacturing, mechanism of action and specifications has been done. In the pharmaceutical context, these devices are technologically well-equipped interfaces for diverse physicochemical signals. Above mentioned information with a broader perspective has also been discussed in this article. Several wearable drug delivery systems have been introduced in the market in recent years. But a lot of testing needs to be conducted to address the numerous obstacles before the wearable devices are successfully launched in the market.

Antibacterial Layer-by-Layer Coatings for Medical Implants

The widespread occurrence of nosocomial infections and the emergence of new bacterial strands calls for the development of antibacterial coatings with localized antibacterial action that are capable of facing the challenges posed by increasing bacterial resistance to antibiotics. The Layer-by-Layer (LbL) technique, based on the alternating assembly of oppositely charged polyelectrolytes, can be applied for the non-covalent modification of multiple substrates, including medical implants. Polyelectrolyte multilayers fabricated by the LbL technique have been extensively researched for the development of antibacterial coatings as they can be loaded with antibiotics, antibacterial peptides, nanoparticles with bactericide action, in addition to being capable of restricting adhesion of bacteria to surfaces. In this review, the different approaches that apply LbL for antibacterial coatings, emphasizing those that can be applied for implant modification are presented.