Biodegradable nanoparticle based transdermal patches for gentamicin delivery: Formulation, characterization and pharmacokinetics in rabbits

From Polymeric Nanoformulations to Polyphenols-Strategies for Enhancing the Efficacy and Drug Delivery of Gentamicin

Gentamicin is an essential broad-spectrum aminoglycoside antibiotic that is used in over 40 clinical conditions and has shown activity against a wide range of nosocomial, biofilm-forming, multi-drug resistant bacteria. Nevertheless, the low cellular penetration and serious side effects of gentamicin, as well as the fear of the development of antibacterial resistance, has led to a search for ways to circumvent these obstacles. This review provides an overview of the chemical and pharmacological properties of gentamicin and offers six different strategies (the isolation of specific types of gentamicin, encapsulation in polymeric nanoparticles, hydrophobization of the gentamicin molecule, and combinations of gentamicin with other antibiotics, polyphenols, and natural products) that aim to enhance the drug delivery and antibacterial activity of gentamicin. In addition, factors influencing the synthesis of gentamicin-loaded polymeric (poly (lactic-co-glycolic acid) (PLGA) and chitosan) nanoparticles and the methods used in drug release studies are discussed. Potential research directions and future perspectives for gentamicin-loaded drug delivery systems are given.

Anti-arthritic effects of geranium essential oil loaded chitosan nanoparticles in Freund's complete adjuvant induced arthritic rats through down-regulation of inflammatory cytokines

Geranium essential oil (GEO) has been widely used in aromatherapy and traditional medicines. Nanoencapsulation, a novel technique has emerged to overcome the environmental degradation and less oral bioavailability of essential oils. This work was undertaken to encapsulate geranium essential oil in chitosan nanoparticles (GEO-CNPs) by ionic gelation technique and to explore anti-arthritic and anti-inflammatory potential in FCA-induced arthritic model in rats. The GEO was characterized by gas chromatography flame ionization detector (GCFID) and the nanosuspension was characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and X-rays diffraction (XRD). The Wistar albino rats (n = 32) were separated into four groups; Group 1 and 2 were considered as normal and arthritic controls. Group 3 was positive control that received oral celecoxib for 21 days while Group 4 was treated with oral GEO-CNPs after the induction of arthritis. Hind paw ankle joints diameters were weekly measured throughout the study and significant decrease (5.5 ± 0.5 mm) was observed in GEO-CNPs treatment group in comparison to arthritic group (9.17 ± 0.52 mm). Blood samples were drawn at end for evaluation of hematological, biochemical and inflammatory biomarkers. A significant upregulation of red blood cells and hemoglobin while downregulation of white blood cells, interleukin-6 (IL-6), tumor necrosis factor-alpha (TNF-α), C-reactive protein (CRP) and rheumatoid factor (RF) was observed. Ankles were transected for the histopathological and radiographic examination after animals were sacrificed which confirmed the alleviation of necrosis along cellular infiltration. It was concluded that GEO-CNPs were found to possess excellent therapeutic potential and promising candidates to reduce FCA-induced arthritis.

Porous Zirconia Scaffolds Functionalized with Calcium Phosphate Layers and PLGA Nanoparticles Loaded with Hydrophobic Gentamicin

Implant-related infections are a worldwide issue that is considered very challenging. Conventional therapies commonly end up failing; thus, new solutions are being investigated to overcome this problem. The in situ delivery of the drug at the implant site appears to be more sufficient compared to systemic antibiotic therapy. In this study, we manufactured porous zirconia scaffolds using the foam replication method. To improve their overall bioactivity, they were coated with a calcium phosphate (CaP) layer containing antibiotic-loaded degradable polymer nanoparticles (NPs) obtained by the double emulsion method to achieve the antibacterial effect additionally. Encapsulation efficiency (EE) and drug loading (DL) were superior and were equal to 99.9 ± 0.1% and 9.1 ± 0.1%, respectively. Scaffolds were analyzed with scanning electron microscopy, and their porosity was evaluated. The porosity of investigated samples was over 90% and resembled the microstructure of spongy bone. Furthermore, we investigated the cytocompatibility with osteoblast-like MG-63 cells and antimicrobial properties with Staphylococcus aureus. Scaffolds coated with a CaP layer were found non-toxic for MG-63 cells. Moreover, the presence of antibiotic-loaded nanoparticles had no significant influence on cell viability, and the obtained scaffolds inhibited bacteria growth. Provided processes of fabrication of highly porous zirconia scaffolds and surface functionalization allow minimizing the risk of implant-related infection.

Surface Multifunctionalization of Inert Ceramic Implants by Calcium Phosphate Biomimetic Coating Doped with Nanoparticles Encapsulating Antibiotics

Aseptic loosening and periprosthetic infections are complications that can occur at the interface between inert ceramic implants and natural body tissues. Therefore, the need for novel materials with antibacterial properties to prevent implant-related infection is evident. This study proposes multifunctionalizing the inert ceramic implant surface by biomimetic calcium phosphate (CaP) coating decorated with antibiotic-loaded nanoparticles for bioactivity enhancement and antibacterial effect. This study aimed to coat zirconium dioxide (ZrO₂) substrates with a bioactive CaP-layer containing drug-loaded degradable polymer nanoparticles (NPs). The NPs were loaded with two antibiotics, gentamicin or bacitracin. The immobilization of NPs happened by two deposition methods: coprecipitation and drop-casting. X-ray diffraction (XRD), scanning electron microscopy (SEM), and cross-section analyses were used to characterize the coatings. MG-63 osteoblast-like cells and human mesenchymal stem cells (hMSC) were chosen for in vitro tests. Antibacterial activity was assessed with S. aureus and E. coli. The coprecipitation method allowed for a favorable homogeneous distribution of the NPs within the CaP coating. The CaP coating was constituted of hydroxyapatite and octacalcium phosphate; its thickness was 3.8 ± 1 μm with cavities of around 1 μm suitable for hosting NPs with a size of 200 nm. Antibiotics were released from the coatings in a controlled manner for 1 month. The cell culture study has confirmed the excellent behavior of the coprecipitated coating, showing cytocompatibility and a homogeneous distribution of the cells on the coated surfaces. The increase in alkaline phosphatase activity showed osteogenic differentiation. The materials were found to inhibit the growth of bacteria. Newly developed coatings with antibacterial and bioactive properties are promising candidates to prevent peri-implant infectious bone diseases.

Recent Options and Techniques to Assess Improved Bioavailability: In Vitro and Ex Vivo Methods

Bioavailability assessment in the development phase of a drug product is vital to reveal the disadvantageous properties of the substance and the possible technological interventions. However, in vivo pharmacokinetic studies provide strong evidence for drug approval applications. Human and animal studies must be designed on the basis of preliminary biorelevant experiments in vitro and ex vivo. In this article, the authors have reviewed the recent methods and techniques from the last decade that are in use for assessing the bioavailability of drug molecules and the effects of technological modifications and drug delivery systems. Four main administration routes were selected: oral, transdermal, ocular, and nasal or inhalation. Three levels of methodologies were screened for each category: in vitro techniques with artificial membranes; cell culture, including monocultures and co-cultures; and finally, experiments where tissue or organ samples were used. Reproducibility, predictability, and level of acceptance by the regulatory organizations are summarized for the readers.

Quercetin-loaded chitosan nanoparticles ameliorate adjuvant-induced arthritis in rats by regulating anti-oxidant enzymes and downregulating pro- and inflammatory cytokines

Rheumatoid arthritis (RA) is an inflammatory condition and associated with the symmetrical synovitis of the joints and cause joint pain. The use of anti-rheumatic drugs is associated with many adverse effects. Quercetin, an important polyphenolic flavonoid, possess anti-inflammatory and anti-rheumatic effects. Quercetin use is limited due to poor absorption and bioavailability. Nanomedicines are used for the targeted drug delivery, hence it reduces the adverse effects of the drug. Based upon these factors, quercetin-loaded chitosan nanoparticles (Q-NPs) were prepared by solvent evaporation method, characterized and their better anti-rheumatic effect with mechanistic insights was validated in Freund's complete adjuvant (FCA)-induced arthritic rats along with safety studies. The animals were divided into five groups, each containing 5 animals. Group I was normal control, group II was arthritic control, while groups III, IV and V were administered with quercetin (15 mg/Kg) and Q-NPs (10 and 20 mg/Kg), respectively. The reduction in ankle diameter, serum oxidative stress markers as well as pro- and inflammatory cytokines, e.g., tumor necrosis factor (TNFα), interleukin (IL-6) were determined. The prepared Q-NPs showed hydrodynamic size of 83.9 nm, polydispersity index of 0.687, entrapment efficiency 90.5% as well as no interaction between quercetin and chitosan in Fourier transform infrared spectroscopy (FTIR). A significant reduction (p < 0.001) in ankle diameter was observed after administration of high-dose Q-NPs (4.32 ± 0.14 cm to 5.13 ± 0.62 cm). There was also reduction (p < 0.001) in levels of TNFα and IL-6 following high-dose Q-NPs (72.56 ± 2.30 and 308.19 ± 11.5 pg). The effect on biochemical tests, hematological parameters and oxidative stress parameters was also found to be significant. Histopathological changes of kidney, liver and ankle also confirmed the anti-rheumatic effect of high-dose Q-NPs. The study concludes that administration of Q-NPs (20 mg/Kg) may be used for the treatment of FCA-induced RA in rats.

Antioxidant and Wound Healing Potential of Essential Oil from Citrus reticulata Peel and Its Chemical Characterization

BACKGROUND

Fruit peels are considered as waste and contribute to a major proportion of the biomass. They can be a good source of various therapeutic benefits. Peels biomass of citrus fruits is usually considered as garbage. Such peels may have many important and valuable medicinal components with pharmacological activities. Citrus reticulata, (Rutaceae family, local name tangerine) is a local seasonal fruit in Pakistan, a very good example of wastage of its peels.

OBJECTIVE

The study is based on the exploration of a citrus fruit peel derived essential oil, its chemical characterization, identification of various bioactive components and the exploration of pharmacological potentials (antibacterial and wound healing activity).

METHODS

Essential oil was recovered by hydro-distillation of freshly collected peels. Chemical constituents of oil were determined by Gas Chromatography-Mass Spectroscopy (GC-MS) analysis. Antioxidant activities were evaluated by total phenolic contents, total flavonoid content, DPPH scavenging activity and reducing power assay. Antibacterial activity was determined using disc diffusion assay. In vivo wound healing potential was determined in rabbits after topical administration of oil. Wound scoring was calculated followed by histological study.

RESULTS

GC-MS analysis showed the presence of various components with the greatest proportion of D-Limonene (89.31%). Total flavonoid and phenolic contents were found to be 14.63 ± 0.95 mg CE/g and 17.03 ± 3.24 mg GAE/g respectively, while DPPH activity was found to be 73.32%. A better antibacterial activity was shown against E. coli. In vivo studies showed significant reduction in wound diameter in essential oil treatment groups. Further, the essential oil was found non-irritant in draize scoring.

CONCLUSION

The study concluded that essential oil of this fruit peel might be used for antibacterial and wound healing purposes.

Pharmacokinetic profile of chitosan modified poly lactic co-glycolic acid biodegradable nanoparticles following oral delivery of gentamicin in rabbits

Gentamicin (GM) is a well know antibiotic and drug of choice for various infections and is available in the form of parenteral and topical formulations. Gentamicin has no oral dosage form due to its enzymatic degradation and poor bioavailability. This study was designed to optimize controlled release oral dosage form of GM using poly lactic co-glycolic acid (PLGA) nanoparticles (NPs) which were surface modified with chitosan. Nanoparticles were characterized for size, potential, scanning electron microscopy and fourier transform infrared spectroscopy. Drug concentration in plasma samples was determined by microbiological assay against Bacillus subtilis (ATCC 9372). In vitro release pattern was studied and the best formulation was administered to healthy rabbits for pharmacokinetic studies. Various pharmacokinetic parameters determined for oral formulation were area under the curve (AUC) 43.2 ± 2.16 h.mg/L, volume of distribution (Vd) 1.54 ± 0.25 L, half-life phase-1 (t_1/2α) 0.59 ± 0.12 h, mean residence time (MRT) 11.22 ± 0.42 h, time to reach maximum concentration (Tmax) 2.56 ± 0.09 h and maximum concentration (Cmax) was 3.49 ± 0.10 mg/L. It is concluded that chitosan modified GM loaded PLGA NPs has potential for oral absorption and can be used for achieving therapeutic benefits.