A mini-review of Thymol incorporated materials: Applications in antibacterial wound dressing

Fabrication of Thymol-loaded Isabgol/Konjac Glucomannan-based Microporous Scaffolds with Enriched Antioxidant and Antibacterial Properties for Skin Tissue Engineering Applications

An antioxidant, antibacterial, and biocompatible biomaterial is essential to repair skin wounds effectively. Here, we have employed two natural biopolymers, isabgol (ISAB) and konjac glucomannan (KGM), to prepare microporous scaffolds by freezing and lyophilization. The scaffolds are loaded with thymol (THY) to impart potent antioxidant and antibacterial activities. The physicochemical properties of the ISAB+KGM+THY scaffold, like porosity (41.8±2.4 %), swelling, and biodegradation, were optimal for tissue regeneration application. Compared to the control, ISAB+KGM+THY scaffolds promote attachment, migration, and proliferation of L929 fibroblasts. The antioxidant activity of the ISAB+KGM+THY scaffold was significantly improved after loading THY. This would protect the tissues from oxidative damage. The antibacterial activity of the ISAB+KGM+THY scaffold was significantly higher than that of the control, which would help prevent bacterial infection. The vascularization ability of the ISAB+KGM scaffold was not altered by incorporating THY in the ISAB+KGM scaffold. Therefore, a strong antioxidant, antibacterial, and biocompatible nature of the ISAB+KGM+THY scaffold could be useful for various biomedical applications.

Effects of intrinsic and extrinsic growth factors on virulence gene expression of foodborne pathogens in vitro and in food model systems; a review

Since foodborne diseases are one of the major causes of human hospitalization and death, one of the main challenges to food safety is the elimination or reduction of pathogens from food products throughout the food production chain. Pathogens, such as Salmonella species, Escherichia coli, Bacillus cereus, Clostridium species, Staphylococcus aureus, Listeria monocytogenes, Campylobacter species, etc., enter the consumer's body through the consumption of contaminated food and eventually cause disease, disability, and death in humans. In particular, the expression of virulence genes of these pathogens in various food environments containing them has been repeatedly reported, which is a key issue for the survival and pathogenicity of the pathogen. Hence, in this review, the interventions to prevent and control foodborne diseases, such as the application of natural preservatives, redox potential, heat treatments, high-pressure processing, and gaseous atmosphere, are discussed based on the literature. Moreover, the effects of various environmental conditions on bacterial gene expression are comprehensively reviewed. In conclusion, the effects of intrinsic and extrinsic factors on the growth and pathogenicity of bacteria are very complicated. The information obtained from the current study can be used to develop new control strategies, improve food safety, and ensure human health.

Analytical and Antimicrobial Characterization of Zn-Modified Clays Embedding Thymol or Carvacrol

Carvacrol and thymol are broad-spectrum natural antimicrobial agents. To reduce their volatility and improve their antimicrobial performance, synergistic systems were prepared loading the active molecules in zinc-modified clays. Montmorillonite (MMT) and zeolite (ZEO) were modified with zinc ions (ZnMMT and ZnZEO), with well-known antimicrobial properties, and then with carvacrol or thymol, reaching the 26 ± 3% and 33 ± 2% w/w of loading, respectively. The resulting hybrid materials were characterized by FT-IR, XPS, XRD, TGA, and GC-MS to evaluate carvacrol/thymol release in simulating food matrices. Antimicrobial assays carried out using spoiler and pathogenic bacterial strains showed that the antimicrobial activity of both thymol and carvacrol was largely preserved once they were loaded into Zn-modified clays. However, MMT hybrids showed an antibacterial activity significantly higher than ZEO hybrids at 50 mg/mL of thymol and carvacrol. For this reason, deeper antimicrobial evaluations were carried out only for ZnMMT composites. ZnMMT loaded with thymol or carvacrol produced inhibition zones against most of the target strains, also at 3.12 mg/mL, while the positive controls represented by the single molecule thymol or carvacrol were not active. The hybrid materials can be useful for applications in which the antimicrobial activity of natural molecules need to be displayed over time as requested for the control of microbial pathogens and spoilage bacteria in different applications, such as active packaging, biomaterials, and medical devices.

Dual Functional Antibacterial-Antioxidant Core/Shell Alginate/Poly(ε-caprolactone) Nanofiber Membrane: A Potential Wound Dressing

Core/shell nanofibers offer the advantage of encapsulating multiple drugs with different hydrophilicity in the core and shell, thus allowing for the controlled release of pharmaceutic agents. Specifically, the burst release of hydrophilic drugs from such fiber membranes causes an instantaneous high drug concentration, whereas a long and steady release is usually desired. Herein, we tackle the problem of the initial burst release by the generation of core/shell nanofibers with the hydrophilic antibiotic drug gentamycin loaded within a hydrophilic alginate core surrounded by a hydrophobic shell of poly(ε-caprolactone). Emulsion electrospinning was used as the nanofibrous mesh generation procedure. This process also allows for the loading of a hydrophobic compound, where we selected a natural antioxidant molecule, betulin (BTL), to detoxify the radicals. The resulting nanofibers exhibited a cylindrical shape with a core/shell structure. In vitro tests showed a controlled release of gentamicin from nanofibers via diffusion. The drug reached 93% release in an alginate hydrogel film but only 50% release in the nanofibers, suggesting its potential to minimize the initial burst release. Antibacterial tests revealed significant activity against both Gram-negative and Gram-positive bacteria. The antioxidant property of betulin was confirmed through the DPPH assay, where the incorporation of 20% BTL revealed 37.3% DPPH scavenging. The nanofibers also exhibited favorable biocompatibility in cell culture studies, and no harmful effects on cell viability were observed. Overall, this research offers a promising approach to producing core/shell nanofibrous mats with antibacterial and antioxidant properties, which could effectively address the requirements of wound dressings, including infection prevention and wound healing acceleration.

Carvacrol and Thymol Hybrids: Potential Anticancer and Antibacterial Therapeutics

Cancer is ranked among lethal diseases globally, and the increasing number of cancer cases and deaths results from limited access to effective therapeutics. The use of plant-based medicine has been gaining interest from several researchers. Carvacrol and its isomeric compound, thymol, are plant-based extracts that possess several biological activities, such as antimalarial, anticancer, antifungal, and antibacterial. However, their efficacy is compromised by their poor bioavailability. Thus, medicinal scientists have explored the synthesis of hybrid compounds containing their pharmacophores to enhance their therapeutic efficacy and improve their bioavailability. Hence, this review is a comprehensive report on hybrid compounds containing carvacrol and its isomer, thymol, with potent anticancer and antibacterial agents reported between 2020 and 2024. Furthermore, their structural activity relationship (SAR) and recommended future strategies to further enhance their therapeutic effects will be discussed.

Exploring the multifaceted bioactivities of Lavandula pinnata L. essential oil: promising pharmacological activities

Introduction: This study investigates the biological activities of Lavandula pinnata essential oil (LPEO), an endemic lavender species from the Canary Islands, traditionally used in treating various ailments. Methods: LPEO was extracted by hydrodistillation and analyzed using GC-MS. Antioxidant activity was assessed by DPPH radical scavenging and total antioxidant capacity assays. Antimicrobial activity was evaluated by disc diffusion, MIC, MBC, and MFC determination against bacterial (Staphylococcus aureus, Micrococcus luteus, Escherichia coli, Pseudomonas aeruginosa) and fungal (Candida glabrata, Rhodotorula glutinis, Aspergillus niger, Penicillium digitatum) strains. Antidiabetic and anti-gout potential were investigated through α-amylase, α-glucosidase, and xanthine oxidase inhibition assays. Antityrosinase activity was determined using a modified dopachrome method. Cytotoxicity was assessed by MTT assay against breast (MCF-7, MDA-MB-468), liver (HepG2), colon (HCT-15) cancer cells, and normal cells (PBMCs). Results and discussion: LPEO exhibits potent antiradical activity (IC50 = 148.33 ± 2.48 μg/mL) and significant antioxidant capacity (TAC = 171.56 ± 2.34 μg AA/mg of EO). It demonstrates notable antibacterial activity against four strains (Staphylococcus aureus, Micrococcus luteus, Escherichia coli, and Pseudomonas aeruginosa) with inhibition zones ranging from 18.70 ± 0.30 mm to 29.20 ± 0.30 mm, along with relatively low MIC and MBC values. LPEO displays significant antifungal activity against four strains (Candida glabrata, Rhodotorula glutinis, Aspergillus niger, and Penicillium digitatum) with a fungicidal effect at 1 mg/mL, surpassing the positive control (cycloheximide), and MIC and MFC values indicating a fungicidal effect. It exhibits substantial inhibition of xanthine oxidase enzyme (IC50 = 26.48 ± 0.90 μg/mL), comparable to allopurinol, and marked inhibitory effects on α-amylase (IC50 = 31.56 ± 0.46 μg/mL) and α-glucosidase (IC50 = 58.47 ± 2.35 μg/mL) enzymes.The enzyme tyrosinase is inhibited by LPEO (IC50 = 29.11 ± 0.08 mg/mL). LPEO displays moderate cytotoxic activity against breast, liver, and colon cancer cells, with low toxicity towards normal cells (PBMC). LPEO exhibits greater selectivity than cisplatin for breast (MCF-7) and colon (HCT-15) cancer cells but lower selectivity for liver (HepG2) and metastatic breast (MDA-MB-468) cancer cells. These findings suggest the potential of LPEO as an antioxidant, antimicrobial, anti-gout, antidiabetic, and anticancer agent.

Gel-Dispersed Nanostructured Lipid Carriers Loading Thymol Designed for Dermal Pathologies

Purpose

Acne vulgaris is one of the most prevalent dermal disorders affecting skin health and appearance. To date, there is no effective cure for this pathology, and the majority of marketed formulations eliminate both healthy and pathological microbiota. Therefore, hereby we propose the encapsulation of an antimicrobial natural compound (thymol) loaded into lipid nanostructured systems to be topically used against acne.

Methods

To address this issue, nanostructured lipid carriers (NLC) capable of encapsulating thymol, a natural compound used for the treatment of acne vulgaris, were developed either using ultrasonication probe or high-pressure homogenization and optimized using 22-star factorial design by analyzing the effect of NLC composition on their physicochemical parameters. These NLC were optimized using a design of experiments approach and were characterized using different physicochemical techniques. Moreover, short-term stability and cell viability using HaCat cells were assessed. Antimicrobial efficacy of the developed NLC was assessed in vitro and ex vivo.

Results

NLC encapsulating thymol were developed and optimized and demonstrated a prolonged thymol release. The formulation was dispersed in gels and a screening of several gels was carried out by studying their rheological properties and their skin retention abilities. From them, carbomer demonstrated the capacity to be highly retained in skin tissues, specifically in the epidermis and dermis layers. Moreover, antimicrobial assays against healthy and pathological skin pathogens demonstrated the therapeutic efficacy of thymol-loaded NLC gelling systems since NLC are more efficient in slowly reducing C. acnes viability, but they possess lower antimicrobial activity against S. epidermidis, compared to free thymol.

Conclusion

Thymol was successfully loaded into NLC and dispersed in gelling systems, demonstrating that it is a suitable candidate for topical administration against acne vulgaris by eradicating pathogenic bacteria while preserving the healthy skin microbiome.

A comparative study on DNA and protein binding properties of thymol and thymoquinone

Two phytochemicals, thymol and thymoquinone obtained from thymes (Thymus vulgaris L., Lamiaceae etc.) and Nagila Sativa seed, respectively. Both the phytochemicals show several biochemical activities like anticancer, antimicrobial etc. In this paper, we studied the affinities of thymol and thymoquinone towards calf thymus DNA (CT-DNA) and protein (bovine serum albumin). Spectroscopic and molecular modelling studies revealed that both compounds have a high affinity toward both the receptors; DNA and protein. Both phytochemicals binds to the minor grooves of DNA and suitable pockets of protein. Several free energy function and hydrogen bonding play significant role during the binding phenomenon.Communicated by Ramaswamy H. Sarma.

Antibacterial potential and cytotoxic activity of iron oxide nanoparticles conjugated with thymol (Fe3O4@Glu-Thymol) on breast cancer cells and investigating the expression of BAX, CASP8, and BCL-2 genes

The use of metal nanoparticles (NPs) conjugated with natural herbal molecules in biomedical applications has been growing. In this work, we synthesized Iron oxide NPs conjugated with thymol (Fe3O4@Glu-Thymol) and investigated their antibacterial and anticancer potentials. Physicochemical features of the NPs were studied by FT-IR, EDS-mapping, XRD, DLS, zeta potential, and electron microscopy. The antibacterial activity of the NPs against Pseudomonas aeruginosa and anticancer activity for breast cancer cells was investigated by broth microdilution and MTT and flow cytometry assays, respectively. The expression of apoptosis signaling genes in breast cancer cells that were treated with the NPs was studied by qPCR assay. The NPs were spherical, in a size range of 40-66 nm, without impurities, and with zeta potential and hydrodynamic size of - 23 mV and 185 nm, respectively. Moreover, the FT-IR and XRD assays confirmed the proper synthesis of Fe3O4 and conjugation with thymol. The minimum inhibitory concentration of the NPs for P. aeruginosa strains was 64-128 µg/mL. Our results showed that Fe3O4@Glu-Thymol was considerably more toxic for breast cancer cells than normal human cells and the 50% inhibitory concentration were 90.4 and 322 µg/mL, respectively. Upon treating breast cancer cells with the NPs the frequency of cell apoptosis increased by 18.9%. Also, the expression of the BAX and CASP8 genes in NPs treated cells significantly increased by 1.75 and 2.25 folds, respectively while the BCL-2 gene remained almost constant. This study reveals that Fe3O4@Glu-Thymol has considerable potential to be used in biomedical fields.

Engineering of PVA/PVP Hydrogels for Agricultural Applications

Hydrogels have gained significant popularity in agricultural applications in terms of minimizing waste and mitigating the negative environmental impact of agrochemicals. This review specifically examines the utilization of environmentally friendly, shapable hydrogels composed of polyvinyl alcohol (PVA) and polyvinylpyrrolidone (PVP) in various casings for crop protection against different pests, fertilizing, and watering. To activate their effectiveness, PVA/PVP hydrogels were loaded with both hydrophilic and hydrophobic environmentally friendly pesticides, namely hydrogen peroxide (HP), the essential oil thymol, and urea as a fertilizer, either separately or in combination. This review covers various physical and chemical approaches used for loading, shaping, and controlling the release profiles of pesticides and fertilizers. Additionally, it explores the evaluation of the chemical composition, structure, classification, rheology, and morphology of the hydrogels as well as their impact on the thermal stability of the encapsulated pesticides and fertilizer, followed by biological tests. These hydrogels significantly contribute to the stabilization and controlled release of essential nutrients and biocides for plants, while maintaining excellent biocidal and fertilizing properties as well as sustainability characteristics. By shedding light on the latest insights into the concepts, applications, and results of these hydrogels, this review demonstrates their immense potential for widespread future use in agriculture.

Dual-drug (Curcumin/Ciprofloxacin) loading and release from chitosan-based hydrogels embedded with magnetic Montmorillonite/Hyaluronic acid for enhancing wound healing

Montmorillonite (MMt) is extensively applied as an efficient drug-carrier in designing drug delivery systems (DDS) due to its high specific surface area to load drugs. Modification of MMt via iron (Fe) blending can thus be a desirable method to improve its biocompatibility. Herein, magnetic nano-carriers involving the magnetic MMt (mMMt) core surrounded by chitosan (Chito) as a biopolymer and hyaluronic acid (HA) were prepared. To coat the mMMt fabricated through the coprecipitation of the Fe3+/Fe2+ ions in the presence of MMt, the acquired mMMt as the core was then treated with the Chito/HA solution to induce the cross-linked Chito/HA as the shell (namely, the Chito/HA-mMMt). The transmission electron microscopy (TEM) results accordingly revealed the existence of the mMMt inside the Chito/HA solution. Curcumin (CUR) and ciprofloxacin (CIP) were further employed as two model drugs. The CUR and CIP release from the Chito/HA-mMMt subsequently occurred in a sustained manner and pH-dependently. Additionally, an upsurge in the CUR and CIP release by applying an external magnetic field was observed. Thus, the prepared Chito/HA-mMMt hydrogels promise an outstanding potential performance in terms of expanding novel pH-dependent DDS with a sustained release behavior. The scratch assay of the given hydrogels also confirms their applications for wound healing.

Thymus Vulgaris Oil Nanoemulsion: Synthesis, Characterization, Antimicrobial and Anticancer Activities

Essential oil nanoemulsions have received much attention due to their biological activities. Thus, a thyme essential oil nanoemulsion (Th-nanoemulsion) was prepared using a safe and eco-friendly method. DLS and TEM were used to characterize the prepared Th-nanoemulsion. Our findings showed that the nanoemulsion was spherical and ranged in size from 20 to 55.2 nm. The micro-broth dilution experiment was used to evaluate the in vitro antibacterial activity of a Th-emulsion and the Th-nanoemulsion. The MIC50 values of the thymol nanoemulsion were 62.5 mg/mL against Escherichia coli and Klebsiella oxytoca, 250 mg/mL against Bacillus cereus, and 125 mg/mL against Staphylococcus aureus. Meanwhile, it emerged that the MIC50 values of thymol against four strains were not detected. Moreover, the Th-nanoemulsion exhibited promising antifungal activity toward A. brasiliensis and A. fumigatus, where inhibition zones and MIC50 were 20.5 ± 1.32 and 26.4 ± 1.34 mm, and 12.5 and 6.25 mg/mL, respectively. On the other hand, the Th-nanoemulsion displayed weak antifungal activity toward C. albicans where the inhibition zone was 12.0 ± 0.90 and MIC was 50 mg/mL. Also, the Th-emulsion exhibited antifungal activity, but lower than that of the Th-nanoemulsion, toward all the tested fungal strains, where MIC was in the range of 12.5-50 mg/mL. The in vitro anticancer effects of Taxol, Th-emulsion, and Th-nanoemulsion were evaluated using the standard MTT method against breast cancer (MCF-7) and hepatocellular carcinoma (HepG2). Additionally, the concentration of VEGFR-2 was measured, and the activities of caspase-8 (casp-8) and caspase-9 (casp-9) were evaluated. The cytotoxic effect was the most potent against the MCF-7 breast cancer cell line after the Th-nanoemulsion treatment (20.1 ± 0.85 µg/mL), and was 125.1 ± 5.29 µg/mL after the Th-emulsion treatment. The lowest half-maximal inhibitory concentration (IC50) value, 20.1 ± 0.85 µg/mL, was achieved when the MCF-7 cell line was treated with the Th-nanoemulsion. In addition, Th-nanoemulsion treatments on MCF-7 cells led to the highest elevations in casp-8 and casp-9 activities (0.66 ± 0.042 ng/mL and 17.8 ± 0.39 pg/mL, respectively) compared to those with Th-emulsion treatments. In comparison to that with the Th-emulsion (0.982 0.017 ng/mL), the VEGFR-2 concentration was lower with the Th-nanoemulsion treatment (0.672 ± 0.019ng/mL). In conclusion, the Th-nanoemulsion was successfully prepared and appeared in nanoform with a spherical shape according to DLS and TEM, and also exhibited antibacterial, antifungal, as well as anticancer activities.

Thymol-Functionalized Hyaluronic Acid as Promising Preservative Biomaterial for the Inhibition of Candida albicans Biofilm Formation

Hyaluronic acid (HA) is a naturally occurring biopolymer that has been employed for a plethora of medicinal applications. Nevertheless, as HA is a natural polysaccharide, it can be a substrate able to promote microbial growth and proliferation. Biopolymer-drug conjugates have gained attention over the years to overcome drawbacks of each single component. Within this context, thymol (Thy), a phenolic compound occurring in essential oils (EOs) extracted from Thymus and Origanum, has been largely studied for its antimycotic applications. However, it is characterized by a low water solubility and moderate cytotoxicity. Herein, we report an innovative HA-thymol conjugate (HA-Thy) biomaterial to circumvent the drawbacks of free thymol use by providing the polymer conjugate with the beneficial properties of both components. Preliminary biological tests evidenced the decrease of thymol cytotoxicity for the HA-Thy conjugate, paired with a promising antibiofilm formation activity against Candida albicans, similar to pure thymol, highlighting its potential application as a preservative biomaterial in formulations.

Encapsulation of Thymol in Gelatin Methacryloyl (GelMa)-Based Nanoniosome Enables Enhanced Antibiofilm Activity and Wound Healing

Non-healing wounds impose huge cost on patients, healthcare, and society, which are further fortified by biofilm formation and antimicrobial resistance (AMR) problems. Here, Thymol, an herbal antimicrobial agent, is utilized to combat AMR. For efficient delivery of Thymol gelatin methacryloyl (GelMa), a hydrophilic polymeric hydrogel with excellent biocompatibility combined with niosome was used to encapsulate Thymol. After optimization of the niosomal Thymol (Nio-Thymol) in the company of GelMa (Nio-Thymol@GelMa) to achieve maximum entrapment efficiency, minimum size, and low polydispersity index, the Thymol release peaked at 60% and 42% from Nio-Thymol@GelMa in medium with pH values of 6.5 and 7.4 after 72 h, respectively. Furthermore, Nio-Thymol@GelMa demonstrated higher antibacterial and anti-biofilm activity than Nio-Thymol and free Thymol against both Gram-negative and Gram-positive bacteria. Interestingly, compared with other obtained formulations, Nio-Thymol@GelMa also led to greater enhancement of migration of human dermal fibroblasts in vitro, and higher upregulation of the expression of certain growth factors such as FGF-1, and matrix metalloproteinases such as MMP-2 and MMP-13. These results suggest that Nio-Thymol@GelMa can represent a potential drug preparation for Thymol to enhance the wound healing process and antibacterial efficacy.

Design and Application of Thymol Electrochemical Sensor Based on the PtNPs-CPOFs-MWCNTs Composite

In this study, the preparation of covalent polyoxometalate organic frameworks (CPOFs) is introduced using the idea of polyoxometalate and covalent organic frameworks. Firstly, the prepared polyoxometalate was functionalized with an amine group (NH₂-POM-NH₂), and then the CPOFs were prepared by a solvothermal Schiff base reaction with NH₂-POM-NH₂ and 2,4,6-trihydroxybenzene-1,3,5-tricarbaldehyde (Tp) as monomers. After the incorporation of PtNPs and MWCNTs into the CPOFs material, the PtNPs-CPOFs-MWCNTs nanocomposites, which possess excellent catalytic activity and electrical conductivity, were formed and utilized as new electrode materials for the electrochemical thymol sensors. The obtained PtNPs-CPOFs-MWCNTs composite exhibits excellent activity toward thymol, which is attributable to its large special surface area, good conductivity and the synergistic catalysis of each component. Under optimal experimental conditions, the sensor presented a good electrochemical response to thymol. The sensor shows two good linear relationships between the current and thymol concentration in the range of 2-65 μM (R² = 0.996) and 65-810 μM (R² = 0.997), with the corresponding sensitivity of 72.7 μA mM^-1 and 30.5 μA mM^-1, respectively. Additionally, the limit of detection (LOD) was calculated to be 0.2 μM (S/N = 3). At the same time, the prepared thymol electrochemical sensor revealed superior stability and selectivity. The constructed PtNPs-CPOFs-MWCNT electrochemical sensor is the first example of thymol detection.

Poly (l-lactic acid)-based modified nanofibrous membrane with dual drug release capability for GBR application

Electrospun multilayer nanofibers guided bone regeneration (GBR) with a new design were developed in this study. The synthesized multilayer GBR was composed of two distinct layers. Poly l-lactic acid (PLA) incorporated with simvastatin (SIM) was designed as PLA/SIM layer to contact with a bone defect. In addition, the hydrophilic gelatin (GT) containing thymol (THY) was fabricated as GT/THY layer to contact connective tissue, potentially for bacterial gathering. Due to the different chemical nature and weak cohesion of the hydrophilic and hydrophobic layers, hybrid fibers made of PLA/SIM and GT/THY were electrospun as cohesion promoters between these layers. The microstructure and characteristics of the synthesized multilayer substrate, named GT/PLA, were evaluated, and different fibrous monolayers were fabricated to determine the optimal concentrations of drugs. Scanning electron microscopy (SEM) images showed continuous, smooth, randomly aligned, and bead-free fibers. In addition, there were no drug particles on the fiber surfaces which displayed the good placement of those inside the fibers. The mats exhibited satisfactory tensile strength (4.60 ± 0.14 MPa) and favorable physicochemical properties, including proper porosity percentage (<50 %) and appropriate pore size. Suitable swelling behavior (293 ± 0.05 %) and adequate degradation rates were also approved by characterizing swelling and degradability in vitro. The GT/PLA membrane exhibited a prolonged and sustained SIM release and controlled THY release with high antibacterial efficiency. Cell viability, cell attachment assay, and nuclear staining using 4',6-diamidino-2-phenylindole (DAPI) showed that the designed GT/PLA substrate had good biocompatibility and cell attachment. Cell infiltration testing also showed that the cells were finely prevented by the outer layer (GT/THY). Overall, the obtained results in this study indicated the great potential of the prepared GT/PLA for use as a GBR which can develop osteogenic and antibacterial biomimetic periosteum optimizing the clinical application of GBR strategies.

Modeling the Solubility of Monoterpenoids with Hybrid and Predictive Thermodynamic Tools

The Abraham and NRTL-SAC semipredictive models were employed to represent the solubility of (-)-borneol, (1R)-(+)-camphor, l-(-)-menthol, and thymol in water and organic solvents, using data measured in this work and collected from the literature. A reduced set of solubility data was used to estimate the model parameters of the solutes, and global average relative deviations (ARDs) of 27% for the Abraham model and 15% for the NRTL-SAC model were obtained. The predictive capability of these models was tested by estimating the solubilities in solvents not included in the correlation step. Global ARDs of 8% (Abraham model) and 14% (NRTL-SAC model) were obtained. Finally, the predictive COSMO-RS model was used to describe the solubility data in organic solvents, with ARD of 16%. These results show the overall better performance of NRTL-SAC in a hybrid correlation/prediction approach, while COSMO-RS can produce very satisfactory predictions even in the absence of any experimental data.

Synthesis and Characterization of Thymol-Loaded Niosomal Film for the Prevention of Implant-Related Infection

Background

Infection is one of the significant challenges in medical implant-related surgeries. Despite systemic antibiotic therapies, bacterial growth after implantation may cause implant failure. Nowadays, unlike the systemic therapy, local controlled release of antibiotic agents is considered an effective approach for the prevention of implant-related infections. The present study aimed to develop a niosomal nanocarrier incorporated into fibroin films for local and continuous delivery of thymol, a natural plant-derived antimicrobial agent for preventing infections caused by implant-related.

Methods

Niosomes containing thymol were prepared by thin-film hydration technique. Thymol sustained release from the prepared films was assessed for 14 days. Antibacterial activities of the synthesized films were also evaluated by the agar diffusion technique against Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus.

Results

The release behavior from the niosomal thymol films showed a sustained manner, in which the amount of the released thymol reached 40% after 14 days. The films containing thymol with and without niosome showed a significant viability against L929 fibroblast cells compared to other groups after 24 and 48 h, using MTT assay. Also, samples exhibited potent antibacterial activity against Gram-negative and Gram-positive bacteria.

Conclusion

The results of this study demonstrate that the niosomal thymol-loaded fibroin film is a promising candidate for the controlled release of thymol and prevention of implant-related infection.

Synthesis of cationic β-cyclodextrin functionalized silver nanoparticles and their drug-loading applications

Silver nanoparticles have attracted great attention owing to their distinct physicochemical properties, which inspire the development of their synthesis methodology and their potential biomedical applications. In this study, a novel cationic β-cyclodextrin (C-β-CD) containing a quaternary ammonium group and amino group was applied as a reducing agent as well as a stabilizing agent to prepare C-β-CD modified silver nanoparticles (CβCD-AgNPs). Besides, based on the inclusion complexation between drug molecules and C-β-CD, the application of CβCD-AgNPs in drug loading was explored by the inclusion interaction with thymol. The formation of AgNPs was confirmed by ultraviolet-visible spectroscopy (UV-vis) and X-ray diffraction spectroscopy (XRD). Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) showed the prepared CβCD-AgNPs were well dispersed with particle sizes between 3-13 nm, and the zeta potential measurement result suggested that the C-β-CD played a role in preventing their aggregation in solution. 1H Nuclear magnetic resonance spectroscopy (1H-NMR) and Fourier transform infrared spectroscopy (FT-IR) revealed the encapsulation and reduction of AgNPs by C-β-CD. The drug-loading action of CβCD-AgNPs was demonstrated by UV-vis and headspace solid-phase microextraction gas chromatography mass spectrometry (HS-SPME-GC-MS), and the results of TEM images showed the size increase of nanoparticles after drug loading.

Antimicrobial Natural Hydrogels in Biomedicine: Properties, Applications, and Challenges-A Concise Review

Natural hydrogels are widely used as biomedical materials in many areas, including drug delivery, tissue scaffolds, and particularly wound dressings, where they can act as an antimicrobial factor lowering the risk of microbial infections, which are serious health problems, especially with respect to wound healing. In this review article, a number of promising strategies in the development of hydrogels with biocidal properties, particularly those originating from natural polymers, are briefly summarized and concisely discussed. Common strategies to design and fabricate hydrogels with intrinsic or stimuli-triggered antibacterial activity are exemplified, and the mechanisms lying behind these properties are also discussed. Finally, practical antibacterial applications are also considered while discussing the current challenges and perspectives.

Therapeutic and pro-healing potential of advanced wound dressings loaded with bioactive agents

Chronic skin wound infections are inextricably linked with high mortality rates. With the rise in the aging population and the threat of diabetes, obesity and lifestyle-based diseases, the risk incurred from invasive wound pathogens has been ever escalating. Thus, more efficacious wound care management is necessary to cope with such morbid illnesses. A plethora of bioactive agents, such as antibiotics, phytochemicals, essential oils, phages among others, has been exploited to develop wound dressings, raising tremendous interest in their prospective use as wound care products. The present review critically focuses on the therapeutic implications of advanced wound dressings that have assisted in the expansion of regenerative medicine and also discusses the practical concerns that have limited their bench-to-market entry.

Chitosan-based films with cannabis oil as a base material for wound dressing application

This study focuses on obtaining and characterizing novel chitosan-based biomaterials containing cannabis oil to potentially promote wound healing. The primary active substance in cannabis oil is the non-psychoactive cannabidiol, which has many beneficial properties. In this study, three chitosan-based films containing different concentrations of cannabis oil were prepared. As the amount of oil increased, the obtained biomaterials became rougher as tested by atomic force microscopy. Such rough surfaces promote protein adsorption, confirmed by experiments assessing the interaction between human albumin with the obtained materials. Increased oil concentration also improved the films' mechanical parameters, swelling capacity, and hydrophilic properties, which were checked by the wetting angle measurement. On the other hand, higher oil content resulted in decreased water vapour permeability, which is essential in wound dressing. Furthermore, the prepared films were subjected to an acute toxicity test using a Microtox. Significantly, the film's increased cannabis oil content enhanced the antimicrobial effect against A. fischeri for films in direct contact with bacteria. More importantly, cell culture studies revealed that the obtained materials are biocompatible and, therefore, they might be potential candidates for application in wound dressing materials.

Nanogels as Potential Delivery Vehicles in Improving the Therapeutic Efficacy of Phytopharmaceuticals

Nanogel is a promising drug delivery approach to improve the pharmacokinetics and pharmacodynamic prospect of phytopharmaceuticals. In the present review, phytopharmaceuticals with astonishing therapeutic utilities are being explored. However, their in vivo delivery is challenging, owing to poor biopharmaceutical attributes that impact their drug release profile, skin penetration, and the reach of optimal therapeutic concentrations to the target site. Nanogel and its advanced version in the form of nanoemulgel (oil-in-water nanoemulsion integrated gel matrix) offer better therapeutic prospects than other conventional counterparts for improving the biopharmaceutical attributes and thus therapeutic efficacy of phytopharmaceuticals. Nanoemulgel-loaded phytopharmaceuticals could substantially improve permeation behavior across skin barriers, subsequently enhancing the delivery and therapeutic effectiveness of the bioactive compound. Furthermore, the thixotropic characteristics of polymeric hydrogel utilized in the fabrication of nanogel/nanoemulgel-based drug delivery systems have also imparted improvements in the biopharmaceutical attributes of loaded phytopharmaceuticals. This formulation approach is about to be rife in the coming decades. Thus, the current review throws light on the recent studies demonstrating the role of nanogels in enhancing the delivery of bioactive compounds for treating various disease conditions and the challenges faced in their clinical translation.

Aromatherapy in Nursing and Midwifery Practice: A Scoping Review of Published Studies Since 2005

Background: Since the 1990's aromatherapy has been a popular adjunct to nursing and midwifery care in a variety of health care settings. Objective: The scoping review seeks to identify and confirm the benefits of incorporating aromatherapy into holistic nursing and midwifery practice Design: A scoping review using PRISMA-ScR of experimental studies where care is provided to the patient by a registered nurse or midwife. Settings and participants: Any health care setting where nurses or midwives provide care. Review Methods: A multi- engine search using a range of MeSH and non-MeSH terms with the Boolean search [AND]. Inclusion criteria were; publication date from 2005-2021, study involved aromatherapy as an intervention, conducted in a clinical nursing or midwifery environment and the published article is available in full in English. Excluded were; single patient cases, animal studies, in vitro studies, use of essential oils internally or a whole plant extract was used or use was non-nursing/midwifery related. Results: 124 studies met the inclusion criteria (n = 19188), classified into seven themes. Conclusion: The evidence supports the use of aromatherapy within a range of nursing and midwifery practices enhancing a holistic model of care. Impact: This scoping review contributes evidence to support the inclusion of aromatherapy into holistic nursing and midwifery practice.

Thymol-loaded PLGA nanoparticles: an efficient approach for acne treatment

Background

Acne is a common skin disorder that involves an infection inside the hair follicle, which is usually treated with antibiotics, resulting in unbalanced skin microbiota and microbial resistance. For this reason, we developed polymeric nanoparticles encapsulating thymol, a natural active compound with antimicrobial and antioxidant properties. In this work, optimization physicochemical characterization, biopharmaceutical behavior and therapeutic efficacy of this novel nanostructured system were assessed.

Results

Thymol NPs (TH-NP) resulted on suitable average particle size below 200 nm with a surface charge around − 28 mV and high encapsulation efficiency (80%). TH-NP released TH in a sustained manner and provide a slow-rate penetration into the hair follicle, being highly retained inside the skin. TH-NP possess a potent antimicrobial activity against Cutibacterium acnes and minor effect towards Staphylococcus epidermis, the major resident of the healthy skin microbiota. Additionally, the stability and sterility of developed NPs were maintained along storage.

Conclusion

TH-NP showed a promising and efficient alternative for the treatment of skin acne infection, avoiding antibiotic administration, reducing side effects, and preventing microbial drug resistance, without altering the healthy skin microbiota. Additionally, TH-NP enhanced TH antioxidant activity, constituting a natural, preservative-free, approach for acne treatment.

Graphical Abstract

Supplementary Information

The online version contains supplementary material available at 10.1186/s12951-021-01092-z.

Surface-Modified Multifunctional Thymol-Loaded Biodegradable Nanoparticles for Topical Acne Treatment

The present work is focused on the development of novel surface-functionalized poly(lactic-co-glycolic acid) nanoparticles loaded with thymol (TH-NPs) for topical administration enhancing thymol anti-inflammatory, antioxidant and wound healing activities against acne. TH-NPs were prepared by solvent evaporation method using different surface functionalization strategies and obtaining suitable physicochemical parameters and a good short-term stability at 4 °C. Moreover, TH-NPs skin penetration and antioxidant activity were assessed in ex vivo pig skin models. Skin penetration of TH-NPs followed the follicular route, independently of the surface charge and they were able to enhance antioxidant capacity. Furthermore, antimicrobial activity against Cutibacterium acnes was evaluated in vitro by the suspension test showing improved antibacterial performance. Using human keratinocyte cells (HaCat), cytotoxicity, cellular uptake, antioxidant, anti-inflammatory and wound healing activities were studied. TH-NPs were non-toxic and efficiently internalized inside the cells. In addition, TH-NPs displayed significant anti-inflammatory, antioxidant and wound healing activities, which were highly influenced by TH-NPs surface modifications. Moreover, a synergic activity between TH-NPs and their surface functionalization was demonstrated. To conclude, surface-modified TH-NPs had proven to be suitable to be used as anti-inflammatory, antioxidant and wound healing agents, constituting a promising therapy for treating acne infection and associated inflammation.

Microgap and microleakage of a hybrid connection platform-switched implant system in the absence or presence of a silicone-based sealing agent

The present study aims to characterize, for the first time, the microgap and bacterial microleakage of a platform-switched implant system with hybrid connection, screwed at distinct torque values (manufacturer recommended torque-25 N cm-and a reduced torque-5 N cm-mimicking the long-term functional use), in the absence or presence of a silicon-based sealing agent. Microgap was determined through scanning electron microscopy and bacterial microleakage was evaluated in vitro, upon Enterococcus faecalis colonization of the system. The sealing efficacy was evaluated in the absence or presence of a commercially available silicon-based sealer. The cytotoxicity of the sealer was further addressed in vitro, with a fibroblastic cell line, in accordance with reference standards. A low microgap of the implant system was verified, regardless of the applied torque load-maximal values ranged around 0.25 and 1.25 µm, for 25 and 5 N cm torques, respectively. No bacterial microleakage was reported at 25 N cm, while at 5 N cm, leakage was verified on 38% of the samples. The application of a silicon-based sealer-with an adequate cytocompatible profile-was effective on preventing the bacterial microleakage on the assayed experimental setting. The assayed platform-switched implant system with hybrid connection presented a low interfacial misfit and an effective sealing capability at manufacturer recommended torque. Despite the increased microleakage at low torque conditions, the application of a cytocompatible silicon-based sealing agent restored the sealing effectiveness of the system. The use of a silicon-based sealing agent can assist on the maintenance of the sealing effectiveness even at low torque conditions.

Antibacterial Activities of Homemade Matrices Miming Essential Oils Compared to Commercial Ones

The increasing bacterial resistance to antibiotics is a worldwide concern. Essential oils are known to possess remarkable antibacterial properties, but their high chemical variability complicates their development into new antibacterial agents. Therefore, the main purpose of this study was to standardize their chemical composition. Several commercial essential oils of ajowan (Trachyspermum ammi L.) and thyme (chemotype thymol) (Thymus vulgaris L.) were bought on the market. GC-MS analysis revealed that thyme essential oils have a chemical composition far more consistent than ajowan essential oils. Sometimes thymol was not even the major compound. The most abundant compounds and the homemade mixtures were tested against two Staphylococcus aureus strains. The antibacterial property of β-caryophyllene presented no direct activity against S. aureus LMG 15975, but in association with thymol or carvacrol at equal percentages an MIC of 125 μg/mL was observed. The mixture of those three compounds at equivalent percentages also decreased by 16-fold the MIC of the penicillin V. Against S. aureus LMG 21674, β-caryophyllene presented an MIC of 31.3 μg/mL and decreased by 267-fold the MIC of the penicillin V. These observations led us to question the benefits of using a complex chemical mixture instead of one active compound to fight bacterial resistance.

Studying the Ability of Thymol to Improve Fungicidal Effects of Tebuconazole and Difenoconazole Against Some Plant Pathogenic Fungi in Seed or Foliar Treatments

Thymol, a secondary plant metabolite possessing antifungal and chemosensitizing activities, disrupts cell wall or membrane integrity and interferes with ergosterol biosynthesis. Thymol also functions as a redox-active compound inducing generation of reactive oxygen species and lipid peroxidation in fungal cells. Previously, we showed thymol significantly enhanced the in vitro growth inhibitory effect of difenoconazole against Bipolaris sorokiniana and Parastagonospora nodorum. More recently, we demonstrated a possibility to use thymol to overcome the resistance of a P. nodorum strain able to grow on difenoconazole-containing media. However, potential for thymol to serve as a chemosensitizing agent in seed or plant treatments, to provide an effective suppression of the above-mentioned plant pathogens by triazole fungicides applied in lowered dosages, had yet to be tested. In the work presented here, we showed combined treatments of naturally infected barley seeds with thymol and difenoconazole (Dividend® 030 FS) synergistically exacerbated the protective effect against common root rot agent, B. sorokiniana, and other fungi (Fusarium spp. and Alternaria spp.). Similarly, co-applied treatment of wheat seeds, artificially inoculated with Fusarium culmorum, resulted in equivalent reduction of disease incidence on barley seedlings as application of Dividend®, alone, at a ten-fold higher dosage. In foliar treatments of wheat seedlings, thymol combined with Folicur® 250 EC (a.i. tebuconazole) enhanced sensitivity of P. nodorum, a glume/leaf blotch pathogen, to the fungicide and provided a significant mitigation of disease severity on treated seedlings, compared to controls, without increasing Folicur® dosages. Folicur® co-applied with thymol was also significantly more effective against a strain of P. nodorum tolerant to Folicur® alone. No additional deoxynivalenol or zearalenone production was found when a toxigenic F. culmorum was cultured in a nutrient medium containing thymol at a concentration used for chemosensitization of root rot agents. Accordingly, F. culmorum exposure to thymol at the sensitizing concentration did not up-regulate key genes associated with the biosynthesis of trichothecene or polyketide mycotoxins in this pathogen. Further studies using field trials are necessary to determine if thymol-triazole co-applications result in sensitization of seed- and foliar-associated plant pathogenic fungi, and if thymol affects production of fusarial toxins under field conditions.

Selected Aspects Related to Medicinal and Aromatic Plants as Alternative Sources of Bioactive Compounds

Natural compounds obtained from different medicinal and aromatic plants have gained respect as alternative treatments to synthetic drugs, as well as raw materials for different applications (cosmetic, food and feed industries, environment protection, and many others). Based on a literature survey on dedicated databases, the aim of the present work is to be a critical discussion of aspects regarding classical extraction versus modern extraction techniques; possibilities to scale up (advantages and disadvantages of different extraction methods usually applied and the influence of extraction parameters); and different medicinal and aromatic plants' different applications (medical and industrial applications, as well as the potential use in nanotechnology). As nowadays, research studies are directed toward the development of modern, innovative applications of the medicinal and aromatic plants, aspects regarding future perspectives are also discussed.

Exploration of Bioengineered Scaffolds Composed of Thermo-Responsive Polymers for Drug Delivery in Wound Healing

Innate and adaptive immune responses lead to wound healing by regulating a complex series of events promoting cellular cross-talk. An inflammatory response is presented with its characteristic clinical symptoms: heat, pain, redness, and swelling. Some smart thermo-responsive polymers like chitosan, polyvinylpyrrolidone, alginate, and poly(ε-caprolactone) can be used to create biocompatible and biodegradable scaffolds. These processed thermo-responsive biomaterials possess 3D architectures similar to human structures, providing physical support for cell growth and tissue regeneration. Furthermore, these structures are used as novel drug delivery systems. Locally heated tumors above the polymer lower the critical solution temperature and can induce its conversion into a hydrophobic form by an entropy-driven process, enhancing drug release. When the thermal stimulus is gone, drug release is reduced due to the swelling of the material. As a result, these systems can contribute to the wound healing process in accelerating tissue healing, avoiding large scar tissue, regulating the inflammatory response, and protecting from bacterial infections. This paper integrates the relevant reported contributions of bioengineered scaffolds composed of smart thermo-responsive polymers for drug delivery applications in wound healing. Therefore, we present a comprehensive review that aims to demonstrate these systems' capacity to provide spatially and temporally controlled release strategies for one or more drugs used in wound healing. In this sense, the novel manufacturing techniques of 3D printing and electrospinning are explored for the tuning of their physicochemical properties to adjust therapies according to patient convenience and reduce drug toxicity and side effects.

Antioxidant, Antimicrobial and Antiviral Properties of Herbal Materials

Recently, increasing public concern about hygiene has been driving many studies to investigate antimicrobial and antiviral agents. However, the use of any antimicrobial agents must be limited due to their possible toxic or harmful effects. In recent years, due to previous antibiotics' lesser side effects, the use of herbal materials instead of synthetic or chemical drugs is increasing. Herbal materials are found in medicines. Herbs can be used in the form of plant extracts or as their active components. Furthermore, most of the world's populations used herbal materials due to their strong antimicrobial properties and primary healthcare benefits. For example, herbs are an excellent material to replace nanosilver as an antibiotic and antiviral agent. The use of nanosilver involves an ROS-mediated mechanism that might lead to oxidative stress-related cancer, cytotoxicity, and heart diseases. Oxidative stress further leads to increased ROS production and also delays the cellular processes involved in wound healing. Therefore, existing antibiotic drugs can be replaced with biomaterials such as herbal medicine with high antimicrobial, antiviral, and antioxidant activity. This review paper highlights the antibacterial, antiviral, and radical scavenger (antioxidant) properties of herbal materials. Antimicrobial activity, radical scavenger ability, the potential for antimicrobial, antiviral, and anticancer agents, and efficacy in eliminating bacteria and viruses and scavenging free radicals in herbal materials are discussed in this review. The presented herbal antimicrobial agents in this review include clove, portulaca, tribulus, eryngium, cinnamon, turmeric, ginger, thyme, pennyroyal, mint, fennel, chamomile, burdock, eucalyptus, primrose, lemon balm, mallow, and garlic, which are all summarized.