Dopamine-conjugated CuS/chitosan nanocomposite for targeted photothermal drug delivery: In vitro cytotoxicity study to establish bio-compatibility

Biocompatible arabinogalactan-chitosan scaffolds for photothermal pharmacology in wound healing and tissue regeneration

Delayed wound healing is often caused by bacterial infections and persistent inflammation. Multifunctional materials with anti-bacterial, anti-inflammatory, and hemostatic properties are crucial for accelerated wound healing. In this study, we report a biomacromolecule-based scaffold (ArCh) by uniquely combining arabinogalactan (Ar) and chitosan (Ch) using a Schiff-based reaction. Further, the optimized ArCh scaffolds were loaded with Glycyrrhizin (GA: anti-inflammatory molecule) conjugated NIR light-absorbing Copper sulfide (CuS) nanoparticles. The resultant GACuS ArCh scaffolds were characterized for different wound healing parameters in in-vitro and in-vivo models. Our results indicated that GACuS ArCh scaffolds showed excellent swelling, biodegradation, and biocompatibility in vitro. Further results obtained indicated that GACuS ArCh scaffolds demonstrated mild hyperthermia and enhanced hemostatic, anti-oxidant, anti-bacterial, and wound-healing effects when exposed to NIR light. The scaffolds, upon further validation, may be beneficial in accelerating wound healing and tissue regeneration response.

Development of mucoadhesive Timolol loaded chitosan-nanocomposite to treat glaucoma

Timolol Maleate is an aqueous soluble β-blocker antiglaucoma drug used to suppress intraocular pressure. Several commercially available ocular formulations are not effective in delivering to the target site due to their water-soluble property and low mucoadhesiveness. Hence, there is a requirement for a highly mucoadhesive drug-loaded nanocomposite to suppress intraocular pressure with enhanced bioavailability. Herein, we have prepared a mucoadhesive Timolol-loaded graphene quantum dot-chitosan-nanocomposite to treat glaucoma in response to lysozyme, secreted in the tear fluid. The as-prepared nanocomposite has been characterized through high resolution-transmission electron microscopic, X-ray photoelectron spectroscopic, X-ray diffraction, and Fourier transform infrared spectral studies. The nanocomposite showed 93.74 % encapsulation efficiency with a loading capacity of 7.73 %. Further, 89.26 %, 95.62 %, and 99.29 % of drug release were observed from the nanocomposite in the presence of 1, 1.5, and 2 mg/mL of lysozyme. The mucoadhesion property has been confirmed by the increment in the particle size, fluorescence spectral variations, and Fourier transform infrared spectroscopic studies in the presence of mucin nanoparticles of size 291 nm. Interestingly, mucoadhesion has been demonstrated by pointing to the quenching in the luminescence of mucin. Further, in vitro biocompatibility assay on human corneal epithelial cells showed ≥80 % cell viability. Hence, this study offers the utilization of naturally secreting enzymes for drug delivery applications instead of uncontrolled pH and temperature-triggered releases.

Plasmonic and Photothermal Effects of CuS Nanoparticles Biosynthesized from Acid Mine Drainage with Potential Drug Delivery Applications

In this work, the plasmonic and photothermal effects of CuS nanoparticles biosynthesized from acid mine drainage (AMD) were studied. CuS were formed by delivering the H2S generated by a sulfidogenic bioreactor to an off-line system containing the AMD. The precipitates collected after contact for an hour were washed and physico-chemically characterized, showing a nanoparticle with a mean diameter of 33 nm, crystalline nature and semiconductor behavior with a direct band gap of 2.2 eV. Moreover, the CuS nanoparticles exhibited localized surface plasmonic resonance in the near infrared range, with a high absorption band centered at 973 nm of wavelength, which allowed an increase in the temperature of the surrounding media under irradiation. Finally, the cytotoxicity of the CuS nanoparticles as well as their potential use as part of drug delivery platforms were investigated.

Synthesis and characterization of mussel-inspired nanocomposites based on dopamine-chitosan-iron oxide for wound healing: In vitro study

There are many challenges faced the soft tissue adhesives in the medical application field. For example, there is a limited effective binding between the medical adhesive and different types of soft tissues. Chitosan (CS) and dopamine (DA) were used as structural units for synthesizing nanocomposites utilized as a wet tissue adhesive. To produce dopamine-chitosan-iron oxide nanocomposites (DA-CS-Fe₃O₄ NCs), DA was loaded onto chitosan-iron oxide nanocomposites. The nanocomposites have been prepared using ionic gelation method under vigorous homogenization and characterized by different techniques. Fourier-transform infrared spectroscopy (FTIR) have shown that DA-CS- Fe₃O₄ NCs could attach to the tissue through two possible functional groups, namely, the catechol and amine groups. The results of in vitro scratch wound-healing assay suggested that the prepared DA-CS- Fe₃O₄ NCs facilitate cell migration (the wound-closure percentage reached 96% at 72 h). All experimental results confirm that DA-CS- Fe₃O₄ NCs are strongly recommended for use as a soft medical tissue adhesive in wound healing and surgeries such as vascular surgery. In addition, the results of the whole blood clotting, antibacterial assessment, live and dead assay, cytotoxicity test, and wound-healing assay indicate that DA-CS-Fe₃O₄ NCs can be used as a multifunctional biomedical adhesive.

Nanomedicine in the Face of Parkinson's Disease: From Drug Delivery Systems to Nanozymes

The complexity and overall burden of Parkinson's disease (PD) require new pharmacological approaches to counteract the symptomatology while reducing the progressive neurodegeneration of affected dopaminergic neurons. Since the pathophysiological signature of PD is characterized by the loss of physiological levels of dopamine (DA) and the misfolding and aggregation of the alpha-synuclein (α-syn) protein, new proposals seek to restore the lost DA and inhibit the progressive damage derived from pathological α-syn and its impact in terms of oxidative stress. In this line, nanomedicine (the medical application of nanotechnology) has achieved significant advances in the development of nanocarriers capable of transporting and delivering basal state DA in a controlled manner in the tissues of interest, as well as highly selective catalytic nanostructures with enzyme-like properties for the elimination of reactive oxygen species (responsible for oxidative stress) and the proteolysis of misfolded proteins. Although some of these proposals remain in their early stages, the deepening of our knowledge concerning the pathological processes of PD and the advances in nanomedicine could endow for the development of potential treatments for this still incurable condition. Therefore, in this paper, we offer: (i) a brief summary of the most recent findings concerning the physiology of motor regulation and (ii) the molecular neuropathological processes associated with PD, together with (iii) a recapitulation of the current progress in controlled DA release by nanocarriers and (iv) the design of nanozymes, catalytic nanostructures with oxidoreductase-, chaperon, and protease-like properties. Finally, we conclude by describing the prospects and knowledge gaps to overcome and consider as research into nanotherapies for PD continues, especially when clinical translations take place.

Combined Strategy of Wound Healing Using Thermo-Sensitive PNIPAAm Hydrogel and CS/PVA Membranes: Development and In-Vivo Evaluation

Past studies have shown that the hot spring effect can promote wound healing. Mild thermal stimulation and metal ions can promote angiogenesis. In this study, the hot spring effect was simulated by thermosensitive PNIPAAm hydrogel loaded with copper sulfide nanoparticles. Heat stimulation could be generated through near-infrared irradiation, and copper ions solution could be pulsed. On the other hand, the CS/PVA nanofiber membrane was attached to the bottom of the hydrogel to simulate the extracellular matrix structure, thus improving the wound healing ability. The CS/PVA nanofiber membrane was prepared by electrospinning, and the appropriate prescription and process parameters were determined. The nanofiber membrane has uniform pore size, good water absorption and permeability. The poor mechanical properties of PNIPAAm hydrogel were improved by adding inorganic clay. The temperature of the hydrogel loaded with CuS nanoparticles reached 40 °C under near-infrared light irradiation for 20 min, and the release rate of Cu²⁺ reached 26.89%. The wound-healing rate of the rats in the combined application group reached 79.17% at 13 days, demonstrating superior results over the other control groups. Histological analyses show improved inflammatory response at the healed wound area. These results indicate that this combined application approach represents a promising wound treatment strategy.

Advances in Chitosan-Based Nanoparticles for Drug Delivery

Nanoparticles (NPs) have an outstanding position in pharmaceutical, biological, and medical disciplines. Polymeric NPs based on chitosan (CS) can act as excellent drug carriers because of some intrinsic beneficial properties including biocompatibility, biodegradability, non-toxicity, bioactivity, easy preparation, and targeting specificity. Drug transport and release from CS-based particulate systems depend on the extent of cross-linking, morphology, size, and density of the particulate system, as well as physicochemical properties of the drug. All these aspects have to be considered when developing new CS-based NPs as potential drug delivery systems. This comprehensive review is summarizing and discussing recent advances in CS-based NPs being developed and examined for drug delivery. From this point of view, an enhancement of CS properties by its modification is presented. An enhancement in drug delivery by CS NPs is discussed in detail focusing on (i) a brief summarization of basic characteristics of CS NPs, (ii) a categorization of preparation procedures used for CS NPs involving also recent improvements in production schemes of conventional as well as novel CS NPs, (iii) a categorization and evaluation of CS-based-nanocomposites involving their production schemes with organic polymers and inorganic material, and (iv) very recent implementations of CS NPs and nanocomposites in drug delivery.

NIR-triggered photocatalytic and photothermal performance for sterilization based on copper sulfide nanoparticles anchored on Ti3C2Tx MXene

Harmful bacterial flourish with the increase in environmental pollution and pose a great threat to human health. Thus, developing new and efficient antibacterial materials is imperative to reduce the pollution caused by traditional sterilization materials and improve sterilization efficiency. In this study, a new photocatalytic antibacterial material was developed to achieve an efficient antibacterial effect. Ti₃C₂T_x@CuS composites were synthesized by simple hydrothermal method, by which copper sulfide (CuS) nanoparticles were anchored on the surface of Ti₃C₂T_x to sharply improve the photocatalytic its antibacterial ability. Ti₃C₂T_x@CuS exhibits excellent antibacterial activity against Escherichia coli and Staphylococcus aureus with bactericidal rates of 99.6% and 99.1%, respectively. Photoluminescence spectroscopy (PL), decay time PL, photocurrent test, electrochemical impedance spectroscopy and finite element method showed that the formation of Ti₃C₂T_x@CuS heterojunction promoted the separation of electrons and holes, improved the electron transport efficiency, and elevated the generation of reactive oxygen species. Moreover, Ti₃C₂T_x@CuS has a stronger photothermal effect and causes more heat release than CuS to improve antibacterial performance. The Ti₃C₂T_x@CuS heterojunction has a broad application prospect in the disinfection and antibacterial fields.