NaOCl effects on primary and permanent pulp chamber dentin

The effect of different conditioning agents on dentin roughness and collagen structure

OBJECTIVES

To assess the impact of various organic and inorganic acids on the roughness, demineralization, and collagen secondary structures of human dentin and to compare these effects with those of traditional agents, specifically phosphoric acid (PA) and ethylenediaminetetraacetic acid (EDTA).

METHODS

Coronal dentin discs (n = 10) were examined by optical profilometry (roughness) and ATR-FTIR before and after conditioning with 32 % PA, 3 % nitric acid (NA), 20 % citric acid (CA), 20 % phytic acid (IP6) or 17 % EDTA. Spectra data were processed to quantify dentin demineralization (DM%) and percentage area of amide I curve-fitted components of β-turns, 310-helix, α-helix, random coils, β-sheets, and collagen maturation index. Statistical analysis was performed by one-way ANOVA or Kruskal-Wallis for DM% and roughness parameters, and paired t-test/Wilcoxon test for amide I components at significance level set at α = 0.05.

RESULTS

All treatments resulted in increased roughness parameters, with the most significant changes occurring primarily with PA, while EDTA exhibited the least changes. DM% was NA>PA>IP6>CA>EDTA in a descending order. Regarding amide I components, NA demonstrated a significant reduction in β-turns, 310-helices, and α-helices and it increased β-sheets and random coils. PA resulted in reduction in β-turns and α-helices while it increased β-sheets. CA and EDTA did not cause significant changes. The collagen maturation index significantly increased only after IP6 treatment.

CONCLUSIONS

The effect on dentin roughness parameters, demineralization, and collagen secondary structures varied based on the type of dentin surface treatment.

CLINICAL SIGNIFICANCE

Understanding the impact of acids on the intrinsic properties of dentin is clinically essential for gaining insights into how these effects influence adhesion to dentin, the long-term stability of resin-based restorations, and the success of remineralization therapies.

Effects of endodontic irrigation solutions on structural, chemical, and mechanical properties of coronal dentin: A scoping review

OBJECTIVE

This review aims to assess structural, chemical, and mechanical properties of coronal dentin after endodontic irrigation.

MATERIALS AND METHODS

Reporting followed the PRISMA extension for scoping reviews. An electronic search was carried out in PubMed, Embase, and Cochrane Library. Records filtered by language and published up to November 4, 2022 were independently screened by two researchers. Studies evaluating structural, chemical, or mechanical properties of human permanent coronal dentin after irrigation within the scope of nonsurgical root canal treatment were included. Data were extracted regarding study type, sample description and size, experimental groups, outcome, evaluation method, and main findings.

RESULTS

From the initial 1916 studies, and by adding 2 cross-references, 11 in vitro studies were included. Seven studies provide ultrastructural and/or chemical characterization, and six assessed microhardness and/or flexural strength. One percent to 8% sodium hypochlorite (NaOCl) and 1%-17% ethylenediaminetetraacetic acid (EDTA) were the most commonly tested solutions, with contact times of 2-240 min (NaOCl) and 1-1440 min (EDTA) being evaluated.

CONCLUSIONS

Overall, the literature is consensual regarding the inevitable impact of NaOCl and chelating agents on coronal dentin, with both deproteinizing and decalcifying effects being concentration- and time-dependent. The alteration of mechanical parameters further confirmed the surface and subsurface ultrastructural and chemical changes.

CLINICAL SIGNIFICANCE

Endodontic treatment success highly depends on restorative sealing. Understanding the result of exposing coronal dentin, the main substrate for bonding, to irrigants' action is crucial. The deproteinizing and decalcifying effects of NaOCl and chelating agents are both concentration- and time-dependent, causing surface and subsurface ultrastructural, chemical, and mechanical alterations.

Effect of sodium hypochlorite, ethylenediaminetetraacetic acid, and dual-rinse irrigation on dentin adhesion using an etch-and-rinse or self-etch approach

The aim was to investigate the influence of endodontic irrigation solutions and protocols on the micro-tensile bond strength (μTBS) to dentin using an etch-and-rinse (ER) or self-etch (SE) adhesive approach. Eighty extracted human molars were ground to dentin. After pretreating for 27 min (21 min-3 min-3 min) with five different endodontic irrigation protocols (Group 1: NaOCl-EDTA-NaOCl; Group 2: NaOCl-NaOCl-EDTA; Group 3: NaOCl-NaCl-NaOCl; Group 4: Dual Rinse-Dual Rinse-Dual Rinse; Group 5: NaCl-NaCl-NaCl), an ER (Optibond FL, Kerr) or a SE (Clearfil SE Bond, Kuraray) adhesive system was applied. After light-curing, composite build-ups were made and cut into dentin-composite sticks. μTBS and failure modes were analyzed. Nonparametric statistical analyses (α = 0.05) were performed for comparison of the five groups within each type of adhesive as well as between the two adhesive systems used. The use of an ER instead of a SE adhesive system resulted in significantly higher μTBS for all irrigation protocols except for group 1 (NaOCl-EDTA-NaOCl) and 2 (NaOCl-NaOCl-EDTA). A statistical difference between the five different endodontic irrigation protocols was only found within the SE adhesive group, where group 1 (NaOCl-EDTA-NaOCl) achieved highest values. The use of an ER adhesive system cancels out the effect of the endodontic irrigation solution. The highest μTBS was achieved when using a NaOCl-EDTA-NaOCl-irrigation protocol in combination with Clearfil SE Bond, which shows that the selection of the endodontic irrigation should match the corresponding SE adhesive system.

Effect of Endodontic Irrigating Solutions on Radicular Dentine Structure and Matrix Metalloproteinases-A Comprehensive Review

Irrigating solutions play an important role in the eradication of intracanal microbes and debris dissolution during endodontic treatment. Different combinations of solutions and protocols have been advocated, with sodium hypochlorite (NaOCl), ethylenediamine tetra acetic acid (EDTA), and chlorhexidine (CHX) remaining the most widely used ones by many clinicians. Although these solutions provide efficient inorganic dissolution and antimicrobial capacity, their use has also been reported to cause undesired effects on root dentin composition and mechanical and biomechanical properties, such as microhardness, surface roughness, bond strength, and matrix metalloproteinase (MMP) activity. Several corroborating studies attribute these changes in mechanical properties of dentine to the use of irrigating solutions, and there are limited reports on how the solutions affect the expression of MMPs, which may be a correlating link to understanding the role of these enzymes in dentin collagen and changes in the mechanical properties of dentin. Hence, using the basis of several studies from the literature, the objective is to comprehensively review the influence of individual and combined irrigating solutions on root dentine structure and the activity of the MMPs.

Experimental Solution of Chitosan and Nanochitosan on Wettability in Root Dentine: In Vitro Model Prior Regenerative Endodontics

Aims

To compare the effect of CS and CSnp on the wettability in root dentine with other irrigation protocols with an experimental in vitro model prior regenerative endodontics. Methods and Material. An in vitro experimental study that included eighty hemisected human root distributed into 8 groups: G1- distilled water; G2- 1% NaOCl/17% EDTA; G3- hypochlorous acid 0.025% HOCl, G4- 1% NaOCl/0.025% HOCl/17% EDTA, G5- 0.2 g/100 mL CS, G6- 1% NaOCl/0.2 g/100 mL CS, G7- CSnp, and G8- 1% NaOCl/CSnp. The wettability analysis calculated the contact angle (θ) between a drop of a blood-like and root dentinal surface; topographic characterization with scanning electron microscopy (SEM) quantified the diameter and number of tubules per area; spectroscopy infrared analyses (IR-S) identified chemical changes in the inorganic (phosphate/carbonate) and organic phase (amide/methyl). Statistical analysis: a linear mixed model, Kruskal–Wallis, and Holm–Bonferroni correction (P < 0.05) were used.

Results

Significantly higher wettability for G2 (27.1 (P = 0.0001)) was found. A mean value of 67°±°for experimental groups (P = 0.07) was found, and we did not identify differences between them. The SEM identified greater tubular opening and erosion for G4 and greater dentinal permeability per area for NaOCl/CS. IR-S identified dentinal organic integrity with NaOCl-CS/CSnp compared to organic reduction promoted for NaOCl/EDTA.

Conclusions

This in vitro dentin determined an indirect association between the wettability and organic contents. The oxidative effect of NaOCl could be neutralized by CS-CSnp, and consequently, the wettability of the substrate decreases.

Does the Photon-Induced Photoacoustic Streaming Activation of Irrigation Solutions Alter the Dentin Microhardness?

Objective: The aim of this in vitro study was to evaluate the efficacy of photon-induced photoacoustic streaming (PIPS) activation of sodium hypochlorite (NaOCl), chlorhexidine (CHX) or ethylenediaminetetraacetic acid (EDTA) on the dentin microhardness and to assess the compositional changes of root dentin. Background data: It is still unclear whether PIPS activation of irrigants alters the dentin microhardness and mineral content of dentin. Materials and methods: Root canals of 72 extracted single-rooted teeth were prepared and teeth were fixed in microcentrifuge tubes with silicone impression material. After setting of the silicone, teeth were removed and split longitudinally in buccolingual direction. One half was used as control (pretreatment) while the other was placed into the tube (posttreatment). Then specimens were divided into six test groups (three with and three without PIPS activation). The irrigants tested were 2.5% NaOCl, 17% EDTA, and 2% CHX. Experimental tooth specimens were irrigated with 6 mL of test solution, with additional PIPS activation applied to the PIPS groups. Then specimens were subjected to Vickers microhardness testing. Percentage change of microhardness was calculated. Energy dispersive X-ray spectroscopy (SEM-EDX) was performed to measure element content. Results: Among the irrigant-alone groups, NaOCl and CHX did not alter the dentin microhardness, whereas statistically lower microhardness values were obtained in EDTA group. Chemical composition of dentin was affected from all irrigants used. PIPS activation led to no additional alteration in dentin microhardness. PIPS significantly increased the phosphorus level in NaOCl group. Conclusions: Dentin microhardness was significantly affected by the irrigation solution, not by the PIPS activation.

Proof-of-concept study to establish an in situ method to determine the nature and depth of collagen changes in dentine using Fourier Transform Infra-Red spectroscopy after sodium hypochlorite irrigation

AIM

To establish a method using Fourier Transform Infra-Red spectroscopy (FTIR) to characterize the nature and depth of changes in dentinal collagen following exposure to sodium hypochlorite (NaOCl) during root canal irrigation in an ex vivo model.

METHODOLOGY

Fourier Transform Infra-Red spectroscopy was used to assess the changes in dentinal collagen when the root canal was exposed to NaOCl. The changes in dentinal collagen caused by NaOCl irrigation of root canals in transverse sections of roots, at 0.5 mm from the canal wall and 0.5 mm from the external root surface, were assessed by FTIR. The data were analysed using paired t-test with 5% significance level.

RESULTS

Fourier Transform Infra-Red spectroscopy confirmed that NaOCl exposure caused alterations in the chemistry and structure of collagen in dentine. FTIR spectra obtained from dentine surfaces and dentine adjacent to root canals exposed to NaOCl, all consistently showed degradation and conformational change of the collagen structure. FTIR data from the ex vivo model showed that the depth of effect of NaOCl extended to at least 0.5 mm from the canal wall.

CONCLUSION

In extracted human teeth, NaOCl caused changes in dentinal collagen that were measurable by FTIR. In an ex vivo model, the depth of effect into dentine extended at least 0.5 mm from the canal wall.

Molecular and morphological surface analysis: effect of filling pastes and cleaning agents on root dentin

The quality of the dentin root is the most important factor for restoration resin sealing and drives the outcome of endodontic treatment.

Effects of chemical agents on physical properties and structure of primary pulp chamber dentin

This study evaluated the effects of chemical agents on the physical properties and structure of primary pulp chamber dentin using surface roughness, microhardness tests, and scanning electron microscopy (SEM). Twenty-five primary teeth were sectioned exposing the pulp chamber and were divided into five groups (n = 5): NT, no treatment; SH1, 1% sodium hypochlorite (NaOCl); SH1U, 1% NaOCl + Endo-PTC®; SH1E, 1% NaOCl + 17% EDTA; and E, 17% EDTA. After dentin treatment, the specimens were submitted to roughness, microhardness testing, and SEM analysis. Roughness and microhardness data were submitted to one-way ANOVA and Tukey's test (P < 0.05). The SH1E group showed the highest roughness, followed by the E group (P < 0.05) when compared with the NT, SH1, and SH1U groups. Microhardness values of SH1 and SH1U showed no significant difference as compared to the NT (control) group (P > 0.05). Microhardness values could not be obtained in the EDTA groups (SH1E and E). The presence of intertubular dentin with opened dentin tubules was observed in the NT, SH1, and SH1U groups. SH1E showed eroded and disorganized dentin with few opened tubules and the intertubular/peritubular dentin was partially removed. Considering the physical and structural approaches and the chemical agents studied, it can be concluded that NaOCl and NaOCl associated with Endo-PTC® were the agents that promoted the smallest changes in surface roughness, microhardness, and structure of the pulp chamber dentin of primary teeth.

Morphological and chemical changes in dentin after using endodontic agents: fourier transform Raman spectroscopy, energy-dispersive x-ray fluorescence spectrometry, and scanning electron microscopy study

We examine the morphological and chemical changes in the pulp chamber dentin after using endodontic agents by scanning electron microscopy (SEM), Fourier transform Raman spectroscopy (FT-Raman), and micro energy-dispersive x-ray fluorescence spectrometry (μEDXRF). Thirty teeth were sectioned exposing the pulp chamber and divided by six groups (n=5): NT-no treatment; CHX-2% chlorhexidine; CHXE-2% chlorhexidine+17% EDTA; E-17% EDTA; SH5-5.25% NaOCl; SH5E-5.25% NaOCl+17% EDTA. The inorganic and organic content was analyzed by FT-Raman. μEDXRF examined calcium (Ca) and phosphorus (P) content as well as Ca/P ratio. Impressions of specimens were evaluated by SEM. Data were submitted to Kruskal-Wallis and Dunn tests (p<0.05). Differences were observed among groups for the 960 cm(-1) peak. Ca and P content differences were significant (SH5>NT=SH5E>CHX>E>CHXE). CHXE and E presented the highest Ca/P ratio values compared to the other groups (p<0.05). The SEM images in the EDTA-treated groups had the highest number of open tubules. Erosion in the tubules was observed in CHX and SH5E groups. Endodontic agents change the inorganic and organic content of pulp chamber dentin. NaOCl used alone, or in association with EDTA, was the most effective agent considering chemical and morphological approaches.

Effects of resin luting agents and 1% NaOCl on the marginal fit of indirect composite restorations in primary teeth

Objective

The purpose of this study was to provide information regarding the marginal adaptation of composite resin onlays in primary teeth previously treated with 1% sodium hypochlorite (NaOCl) (pulp irrigant) using two different resin luting agents.

Material and Methods

Forty extracted sound primary molars had their crowns prepared in a standardized machine and were randomly divided into 4 groups (n=10): G1 (1% NaOCl irrigation+EnForce); G2 (EnForce); G3 (1% NaOCl irrigation+Rely X); G4 (Rely X). The onlays were made with Z250 composite resin on plaster models. After luting, the tooth/restoration set was stored in 100% relative humidity at 37ºC for 24 h and finished with Soflex discs. Caries Detector solution was applied at the tooth/restoration interface for 5 s. The specimens were washed and four digital photos of each tooth were then taken. The extents of the gaps were measured with Image Tool 3.0 software. The percentage data were submitted to a Kruskal-Wallis test (α=0.05). The Relative Risk test analyzed the chance of a gap presence correlated to each group.

Results

There were no statistically significant differences (p>0.05) among the groups. The relative risk test revealed that some groups were more apt to have a presence of gaps than others.

Conclusion

Neither the 1% NaOCl treatment nor the resin luting agents caused any alterations in the dental substrate that could have influenced the marginal adaptation of composite onlays in primary teeth.