Toothbrush bristle configuration and brushing load: Effect on the development of simulated non-carious cervical lesions

Assessing the Effect of Toothpastes on Enamel Surface Roughness Using a Custom-Designed and Fabricated Toothbrush Simulator Device for Evaluation

The primary objective of this study is to emphasize the importance of maintaining optimal oral health through regular toothbrushing practices. To achieve this objective, a custom-designed electromechanical toothbrush simulator device was developed. This innovative tool enables researchers to investigate the impact of abrasive-based whitening toothpastes on enamel surface roughness compared to brushing without toothpaste. The device design is composed of multiple systems, including mechanical, motorization, and toothpaste irrigation components. The device incorporates various components, including mechanical, motorization, and toothpaste irrigation systems. Specifically, the mechanical aspect comprises fabricated metal parts, 3D printed elements, and a load cell for measuring brushing force. The motorization section integrates a microcontroller and a stepper motor, allowing for the adjustment of brushing cycles and speed. Furthermore, the toothpaste irrigation system employs a pump with adjustable speed, along with a toothpaste canister and a waste receptacle. By providing a controlled environment for evaluating the effects of different toothpaste formulations on enamel integrity, this simulator device contributes significantly to advancements in oral care research and product development.

The Gloss Retention of Esthetic Restorations Following Simulated Brushing with Charcoal Oral Products: An In-Vitro Study

AIM

To assess the gloss and gloss retention of two esthetic restorative materials after brushing with a charcoal-infused toothbrush and activated charcoal toothpaste compared to their standard counterparts in all possible combinations.

MATERIALS AND METHODS

In this study,104 disc-shaped specimens were prepared, 52 from each of the two materials: Beautifil II LS composite resin (Giomer) and Fuji II LC resin-modified glass ionomer (RMGI). Specimens of each material were divided into 4 groups (n = 13) according to the tested brushing procedure: group A-standard toothbrush + standard non-whitening toothpaste (S-S), group B-standard toothbrush + activated charcoal toothpaste (S-CH), group C-charcoal-infused toothbrush + standard non-whitening toothpaste (CH-S), and group D-charcoal-infused toothbrush + activated-charcoal toothpaste (CH-CH). Gloss was recorded using a gloss meter initially and after each brushing protocol. The data were statistically analyzed with two-way analysis of variance (ANOVA) and Tukey HSD post hoc tests using SPSS® v.27 software at 5% significance level.

RESULTS

Beautifil II LS showed the highest gloss values after brushing in group D (44 ± 3.9), which was not significantly different from its initial value (46.1 ± 1.8), followed by groups A (32.2 ± 4), B (23.2 ± 3.6), and C (22.7 ± 3.9), while Fuji II LC showed its highest gloss values after brushing in groups D (16.6 ± 3.7) and a (15.4 ± 8.7), followed by groups C (10.9 ± 6) and B (4.4 ± 2.5), all were significantly lower than their respective initial gloss values.

CONCLUSION

The gloss of Giomer and RMGI reduced significantly following the brushing with the tested brushing procedures except for the Giomer group brushed with a combination of charcoal-infused toothbrush and activated-charcoal toothpaste.

CLINICAL SIGNIFICANCE

The brushing using a combination of charcoal-infused toothbrush and activated-charcoal toothpaste is recommended for the gloss retention of Beautifil II LS restorations. However, the gloss of the Fuji II LC cannot be retained after any of the brushing procedures. How to cite this article: Farghal NS, Awadalkreem F, Abouelhonoud NA, et al. The Gloss Retention of Esthetic Restorations Following Simulated Brushing with Charcoal Oral Products: An In-Vitro Study. J Contemp Dent Pract 2024;25(5):473-479.

Durability of infiltrated resin application on white spot lesions after different challenges: An ex vivo study

STATEMENT OF PROBLEM

Infiltrated resin has been widely used as a minimally invasive approach to masking white spot lesions and reinforcing demineralized enamel. Recent evidence confirms its satisfactory effect in the short term, but studies focusing on its long-term performance are lacking.

PURPOSE

The purpose of this ex vivo study was to evaluate the durability of infiltrated resin on white spot lesions after pH cycling and long-term thermocycling, staining, and toothbrushing.

MATERIAL AND METHODS

Four axial surfaces of 25 extracted human molars were sectioned and fabricated as specimens. The enamel surface of each specimen was prepared in 3 areas: sound enamel, demineralized enamel (white spot lesions), and demineralized enamel treated by infiltrated resin. Then, 4 specimens of each molar were allocated to different challenges simulating a 10-year follow-up: pH cycling, thermocycling, staining, and toothbrushing. The surface roughness, microhardness, and CIELab color values were measured before and after different treatments. A scanning electron microscope (SEM) was used to observe representative specimens. Linear mixed models were used to evaluate the effect of different treatments on microhardness, roughness, and color differences (ΔE) (α=.05).

RESULTS

Resin infiltration reduced the surface roughness and increased the microhardness of demineralized lesions, (P<.001) but the values of sound enamel at baseline were not reached. The pH cycling led to the greatest roughness values (515.6 ±56.9 nm) on resin-infiltrated lesions, followed by thermocycling (450.7 ±64.7 nm), toothbrushing (291.2 ±43.5 nm), and staining (183.6 ±49.3 nm) (all P<.001). Only pH cycling significantly decreased the microhardness of resin-infiltrated lesions (81.6 ±14.8 HV 0.2) after progressive demineralization (P<.001). No clinically identified differences were found between resin-infiltrated white spot lesions and sound enamel (ΔE=3.4 ±2.0) at baseline. However, resin-infiltrated lesions demonstrated significantly greater discoloration after pH cycling (ΔE=8.0 ±4.5, P<.001), thermocycling (ΔE=5.4 ±2.0, P=.014), and staining treatments (ΔE=10.4 ±3.2, P<.001) than sound enamel.

CONCLUSIONS

Infiltrated resin application reduced surface roughness, improved microhardness, and masked white spot lesions immediately. However, it could not reestablish the characteristics of sound enamel completely and resist chemical and mechanical challenges over time.

Impact of toothbrush head configuration and dentifrice abrasivity on non-carious cervical lesions in-vitro

OBJECTIVE

To investigate the effect of toothbrush head configuration and dentifrice slurry abrasivity on the development of simulated non-carious cervical lesions (NCCLs) in vitro.

METHODS

Extracted premolars were randomly allocated into 15 groups (n = 16) generated by the association between toothbrush head configuration (flat-trimmed, rippled, cross-angled/multilevel/rubbers added, cross-angled/multilevel/flex head, feathered) and dentifrice slurry abrasivity (low/medium/high). Teeth were mounted on acrylic blocks and had their roots partially covered with acrylic resin, leaving 2-mm root surfaces exposed. Toothbrushing was performed for 35,000 and 65,000 double-strokes. Specimens were analyzed using non-contact profilometry for dental volume loss (mm3) and lesion morphology. Data was analyzed using ANOVA with pairwise comparisons and Kruskal-Wallis tests.

RESULTS

The two-way interaction between toothbrush head configuration and slurry abrasivity was significant (p = 0.02). At 35,000 strokes, the flat-trimmed and cross-angled/multilevel/rubbers added toothbrushes caused the highest loss, when associated to the high-abrasive slurry (p<0.05); whereas cross-angled/multilevel/flex head showed the least loss, when associated to the low-abrasive (p<0.05). At 65,000, more dental loss was observed for all toothbrushes when associated to the high-abrasive slurry, with flat-trimmed causing the highest loss (p < 0.05). Lower dental loss rates were observed for cross-angled/multilevel/flex head associated to the low-abrasive slurry when compared to the other toothbrushes (p < 0.05), except to feathered (p = 0.14) and rippled (p = 0.08). Flat lesions (mean internal angle ± standard-deviation: 146.2°± 16.8) were mainly associated with low-abrasive slurry, while wedge-shaped lesions (85.8°± 18.8) were more frequent with medium- and high-abrasive slurries.

CONCLUSION

The development, progression and morphology of simulated NCCLs were modulated by both toothbrush head configuration and dentifrice abrasivity.

CLINICAL SIGNIFICANCE

Dental professionals should consider both the type of toothbrush and dentifrice abrasivity in the management plan of patients at risk of developing NCCLs.

Stereomicroscopic Aspects of Non-Carious Cervical Lesions

Non-carious cervical lesions (NCCLs) represent a form of tooth wear, characterized by the irreversible loss of dental hard tissues at the enamel-cement junction, without the involvement of caries and dental trauma. The aim of this study was to highlight the morphological elements of NCCLs via their stereomicroscopic examination and to confirm the role of this examination in the diagnosis of early lesions. In addition, the association between the morphological aspects identified during the stereomicroscopic examination of NCCLs and their etiological factors was determined. For this study, extracted teeth with NCCLs were examined with a stereomicroscope. The morphological aspects of NCCLs were evaluated at magnifications up to 75×. In wedge-shaped NCCLs, the stereomicroscopic examination allowed the identification and measurement of scratches, furrows and cracks. In saucer-shaped NCCLs, the stereomicroscopic examination highlighted the smooth appearance of the walls. The presented study highlighted the role of stereomicroscopic examination in the assessment of NCCL morphology and in their early diagnosis. The study confirmed, in particular, the role of occlusal overloads and tooth brushing in determining the morphology of NCCLs.

Assessment of effect of accelerated aging on interim fixed dental materials using digital technologies

PURPOSE

This study assessed the physical and mechanical properties of interim crown materials fabricated using various digital techniques after accelerated aging.

MATERIALS AND METHODS

Three groups of interim dental restorative materials (N = 20) were tested. The first group (CO) was fabricated using a conventional manual method. The second group (ML) was prepared from prefabricated resin blocks for the milling method and cut into specimen sizes using a cutting disc. The third group (3D) was additively manufactured using a digital light-processing (DLP) 3D printer. Aging acceleration treatments using toothbrushing and thermocycling simulators were applied to half of the specimens corresponding to three years of usage in the oral environment (N = 10). Surface roughness (Ra), Vickers microhardness, 3-point bending, sorption, and solubility tests were performed. A 2-way analysis of variance (ANOVA) and Fisher's multiple comparison test were used to compare the results among the groups.

RESULTS

The mean surface roughness (Ra) of the resin after accelerated aging was significantly higher in the CO and ML groups than that before aging, but not in the 3D group. All groups showed reduced hardness after accelerated aging. The flexural strength values were highest in the 3D group, followed by the ML and CO groups after accelerated aging. Accelerated aging significantly reduced water sorption in the ML group.

CONCLUSION

According to the tested material and 3D printer type, both 3D-printed and milled interim restoration resins showed higher flexural strength and modulus, and lower surface roughness than those prepared by the conventional method after accelerated aging.

Tooth Wear and Tribological Investigations in Dentistry

Dental or tooth wear is a physiological process in the life cycle of teeth. Loss of the occlusal surface may cause excessive tooth wear. Several factors may contribute to tooth wear with different intensities and duration in the oral cavity. The oral cavity is generally compared to a tribological system to determine the various types of wear between teeth and restorative materials and assess the amount of dental wear. However, it is challenging to investigate in vitro and in vivo wear owing to the complexity of tooth wear; thus, a clear correlation between in vitro and in vivo data could not be established. This review is aimed at providing an insight into the etiology of tooth wear and tribological investigations in dentistry.

Effect of a sonic toothbrush on the abrasive dentine wear using toothpastes with different abrasivity values

Objective

This in vitro study aimed to investigate the effect of a sonic toothbrush on the resulting abrasive dentine wear using toothpastes with different abrasivities compared to the use of a manual toothbrush.

Methods

Ninety‐six bovine dentine samples were divided into six groups and subjected to a brushing sequence (sonic: 20 min, 0.9 N, 10 strokes/min; manual: 20 min, 1.6 N, 60 strokes/min) as follows: group 1: Elmex Sensitive Plus (RDA = 28) + manual toothbrush; group 2: Elmex Sensitive + sonic toothbrush; group 3: Elmex Kariesschutz (RDA = 65) + manual toothbrush; group 4: Elmex Kariesschutz +sonic toothbrush; group 5: Colgate Total Original (RDA = 121) + manual toothbrush; and group 6: Colgate Total Original +sonic toothbrush. The abrasive dentine wear was measured profilometrically.

Results

The median (IQR) abrasive dentine wear was as follows: Elmex Sensitive Plus (manual toothbrush: 2.7 µm (0.8), sonic toothbrush: 3.1 µm (1.9)); Elmex Kariesschutz (manual toothbrush: 4.9 µm (1.4), sonic toothbrush: 6.4 µm (2.1)); and Colgate Total Original (manual toothbrush: 5.2 µm (1.1), sonic toothbrush: 9.0 µm (3.1)). Differences in dentine wear between sonic and manual toothbrushes were statistically significant only in the groups brushed with Elmex Kariesschutz and Colgate Total Original (p ≤ 0.05).

Conclusion

Brushing with a sonic toothbrush could result in a higher abrasive dentine wear compared to manual toothbrush when combined with toothpastes with high abrasivity values.

Effect of dentin pretreatment on the resulting abrasive dentin wear

Background

This study aims to investigate the influence of different dentin pretreatment procedures on the resulting abrasive dentin wear.

Methods

Two groups (A, B) of 60 dentin samples each were prepared. Group A was brushed with an abrasive slurry (RDA = 85) and group B with a different abrasive slurry (RDA = 174). Four subgroups in each group (n = 15) were created (A1–A4) and (B1–B4). The subgroups were pretreated as follows: A1 + B1 with 1200-grit grinding paper, A2 + B2 with 1200- and 2000-grit papers, A3 + B3 with 1200-, 2000-, and 4000-grit papers, A4 + B4 with 1200-, 2000-, 4000-grit papers and with 1000 brushing strokes with a slurry of Elmex toothpaste. All samples were brushed for 25 min at 120 strokes/min. Abrasive dentin wear was measured for each sample profilometrically and the subgroups were compared with each other within the same group. Repeated measures one-way ANOVA was conducted to compare the subgroups and pairwise contrasts were estimated for multiple testing according to Tukey (α = 0.05).

Results

The resulting abrasive dentin wear in group A ranged between 15.3 ± 3.4 µm and 17.3 ± 5.5 µm and between 20.3 ± 6.8 µm and 22.5 ± 2.6 µm in group B. No statistically significant difference was noticed between any subgroups within the same group (p ˃ 0.05).

Conclusions

Different dentin pretreatment procedures do not affect the resulting abrasive dentin wear independent of the RDA value of the employed abrasive slurry.

Factors Associated with Noncarious Cervical Lesions in Different Age Ranges: A Cross-sectional Study

OBJECTIVES

 Understanding the possible risk factors of noncarious cervical lesion (NCCL) is important for prevention and clinical management of the condition. The aim of this study was to investigate the factors associated with the prevalence of NCCL among adolescents, adults, and elderly people.

MATERIALS AND METHODS

 A cross-sectional study involving 501 participants aged 15 years or older was conducted. Participants were examined to assess the number of natural teeth and the prevalence and severity of NCCL by calibrated examiners. Data on age, gender, harmful toothbrushing habits, and acidogenic diet were collected through individual interviews. Multivariate Poisson's regression models were used to evaluate the association between the independent variables and the prevalence of NCCL according to the three age groups: 15 to 39, 40 to 64, and 65 years or older. RESULTS : The prevalence of NCCL among participants was 62.5% (95% confidence interval: 58.2-66.7). Among 15- to 39-year-old participants, the mean of NCCL was higher in males, those with lower number of teeth and acidogenic diet intake. Males aged 40 to 64 years and those with harmful brushing habits were more likely to present higher mean of NCCL. Elderly people with harmful toothbrushing habits had a greater mean of NCCL.

CONCLUSION

 Demographic (age and gender), clinical (number of teeth), and behavioral characteristics (harmful brushing habits and acidogenic diet) were meaningful factors associated with NCCL severity. The above-mentioned relationships varied between age groups.

Interplay between different manual toothbrushes and brushing loads on erosive tooth wear

OBJECTIVE

To investigate the effect of different types of manual toothbrushes and brushing loads on the progression of erosive tooth wear (ETW) on enamel.

METHODS

Bovine enamel specimens (n = 10) were submitted to a 5-day erosive-abrasive cycling model (0.3 % citric acid for 5 min, artificial saliva for 60 min, 4x/day). Toothbrushing was carried out 2x/day for 15 s, according to the toothbrushes tested (ultra-soft (a): Curaprox 5460; ultra-soft (b): Sensodyne Repair & Protect; soft (a): Colgate Slim Soft; soft (b): Oral-B Indicator Plus; medium: Johnson's Professional; hard: Tek) and brushing loads (1.5 N, 3 N). Surface loss (SL, in μm) was assessed by optical profilometry on conclusion of the cycling. Some of the toothbrush characteristics were evaluated. Data were statistically analyzed (α = 0.05).

RESULTS

For the 1.5 N load, the hard brush showed the highest SL value, with statistical significance. The other toothbrushes did not differ significantly, except that ultra-soft (a) caused significantly higher SL than ultra-soft (b). For the 3 N load, hard and soft (a) exhibited the highest SL. Soft (b) and medium had the lowest SL value, with statistical significance. Only soft (a) and ultra-soft (b) showed significant difference between loads, with lower SL for the load of 1.5 N. None of the toothbrush characteristics were significantly correlated with SL.

CONCLUSIONS

Although different degrees of enamel surface loss were observed with use of the different toothbrushes, no association was found between the toothbrush characteristics and SL. Depending on the toothbrush, the force of brushing was capable of modulating the ETW of enamel. Based on the brushing loads usually applied by healthy individuals, hard brushes are not recommended for use by patients with ETW.

CLINICAL SIGNIFICANCE

The use of hard bristle brushes is not recommended for use by individuals who exert healthy forces when brushing their teeth. The toothbrush characteristics are of secondary importance in terms of causing enamel loss in ETW.