The frequency of the second mesiobuccal canal in maxillary first molars among a sample of the Kurdistan Region-Iraq population - A retrospective cone-beam computed tomography evaluation

Assessment of the root and canal morphology in the permanent dentition of Saudi Arabian population using cone beam computed and micro-computed tomography - a systematic review

INTRODUCTION

Root canal treatment procedures require a thorough understanding of root and canal anatomy. The purpose of this systematic review was to examine the morphological differences of teeth root and their canals assessed using cone-beam computed and micro-computed tomography in Saudi Arabian population.

METHODOLOGY

An electronic search was conducted in PubMed / Medline, Scopus, Google Scholar, and Web of Science databases until January 2023 to retrieve related studies. "Root canal morphology," "Saudi Arabia," "Micro-CT," and "cone-beam computed tomography" were used as keywords. A modified version of previously published risk of bias assessment tool was used to determine the quality assessment of included studies.

RESULTS

The literature search revealed 47 studies that matched the criteria for inclusion, out of which 44 studies used cone beam computed tomography (CBCT) and three were micro-computed tomography (micro-CT) studies. According to the modified version of risk of bias assessment tool, the studies were categorized as low, moderate, and high risk of bias. A total of 47,612 samples were included which comprised of either maxillary teeth (5,412), or mandibular teeth (20,572), and mixed teeth (21,327). 265 samples were used in micro-CT studies while 47,347 teeth samples were used in CBCT studies. Among the CBCT studies, except for three, all the studies were retrospective studies. Frequently used imaging machine and software were 3D Accuitomo 170 and Morita's i-Dixel 3D imaging software respectively. Minimum and maximum voxel sizes were 75 and 300 μm, Vertucci's classification was mostly used to classify the root canal morphology of the teeth. The included micro-CT studies were in-vitro studies where SkyScan 1172 X-ray scanner was the imaging machine with pixel size ranging between 13.4 and 27.4 μm. Vertucci, Ahmed et al. and Pomeranz et al. classifications were applied to classify the root canal morphology.

CONCLUSION

This systematic review revealed wide variations in root and canal morphology of Saudi population using high resolution imaging techniques. Clinicians should be aware of the common and unusual root and canal anatomy before commencing root canal treatment. Future micro-CT studies are needed to provide additional qualitative and quantitative data presentations.

Retrospective study of the morphology of third maxillary molars among the population of Lower Silesia based on analysis of cone beam computed tomography

INTRODUCTION

Understanding the anatomy of root canal systems and being aware of their variations is crucial for successful endodontic treatment. Specifically, the intricate and diverse nature of the root anatomy in maxillary third molars poses a significant challenge for dental clinicians. The study analyzed the morphology of the root canal system in maxillary third molars among residents of the Lower Silesia region in Poland using cone beam computed tomography (CBCT).

MATERIAL AND METHODS

This retrospective cross-sectional imaging study was conducted at the X-Ray Diagnostics Laboratory of the Academic Dental Polyclinic of Wroclaw Medical University, Poland. The study evaluated 316 CBCT scans and included 196 maxillary third molars. They were obtained from 118 females and 78 males over the age of 18, in the period from January to April 2022 (three consecutive months). The number of roots, root canals, and root canal configurations according to Vertucci's classification were analyzed.

RESULTS

Three-rooted maxillary molars were found most often (64.29%), followed by single-rooted (24.49%), two-rooted (7.65%), and four-rooted (3.57%) teeth. Among all the roots examined, Vertucci Type I root canals were the most prevalent. Our research found that single-rooted forms (40 teeth, 33.89% vs. 8 teeth, 10.26%, p = 0.0013) of maxillary third molars were significantly more common in females than in males. However, three-rooted forms (62 teeth, 79.49% vs. 64 teeth, 54.24%, p = 0.0013) of maxillary third molars were significantly more common in males than in females.

DISCUSSION

In the Lower Silesia region, the typical maxillary third molar in the Polish population has a three-rooted structure with Vertucci Type I root canal configuration. We noted a sex-dependent correlation in maxillary third molar morphology, with single-rooted forms more prevalent in women and three-rooted forms in men.

Cone-beam computed tomography study of the incidence and characteristics of the second mesiobuccal canal in maxillary permanent molars

Objective: This study aimed to review the characteristics of the second mesiobuccal canal (MB2) in the maxillary first and second permanent molars of 500 patients to analyze the incidence of MB2 and its connection with gender, age, tooth position, and mesiobuccal (MB) root length. The study also aimed to investigate the distribution of the root canal orifice on the pulp chamber floor to obtain an imaging reference for clinical practices related to maxillary molars in Fujian, China. Methods: In accordance with the enrollment criteria, cone-beam computed tomography images of the maxillofacial area were collected from 500 patients, including 1,000 maxillary first molars and 1,000 maxillary second molars. The patients were grouped according to gender and tooth position. The incidence of MB2 was observed, and the MB root length and distribution angle of the mesiobuccal-palatal-distobuccal root canal orifices were measured for statistical analysis. Results: The overall incidence of MB2 in maxillary first and second molars was 51.1% and 32.9%, respectively. The incidence of MB2 in maxillary molars was 50% in male patients and 35.45% in female patients, with a significant difference (p < 0.05). The incidence of MB2 in maxillary molars was significantly higher in subjects aged below 50 (especially in male patients) than those aged 50 and above. The MB root length of maxillary first and second molars with MB2 was longer than that without MB2, and the difference was statistically significant. An association was identified between the incidences of MB2 in contralateral molars of the same type and in ipsilateral adjacent molars. When MB2 occurred in the MB root of maxillary molars, the root canals were mostly classified as type IV, followed by type II. The angle formed by the MB-P-DB orifices on the pulp chamber floor in the maxillary first and second molars was (25.23 ± 5.20) and (20.17 ± 10.88)°respectively. Conclusion: The incidence of MB2 in maxillary molars is high in Fujian, China. The occurrence of MB2 is affected by gender, age, and length of MB root, and it occurs symmetrically in adjacent molars and in contralateral molars of the same type. In addition, the distribution law of the main root canal orifice at the pulp chamber floor is conducive to locating MB2, thereby guiding clinical operations.

Prevalence of mesiobuccal-2 canals in maxillary first and second molars among the Bruneian population—CBCT analysis

Introduction

Identification of the second mesiobuccal canal (MB-2) in maxillary molars is considered an endodontic concern of many practitioners due to its complex morphology. The use of Cone-beam Computed Tomography (CBCT) is a necessity for easier location of this elusive canal during endodontic treatment.

Aim

To study the prevalence of the MB-2 canal in the maxillary first and second molars amongst the Bruneian population.

Materials and methods

A retrospective study involving a review of scans taken from a CBCT scanner (J Morita; Veraviewepocs 3D R100 Panoramic/Cephalometric) over a 5-year period, from May 2016 to May 2021 was carried out. A total of 342 maxillary molars were evaluated independently by two observers. Any contradicting outcomes were discussed by both observers until a consensus was reached. In addition, the correlation of MB-2 canals with gender and age were calculated using the chi-squared test.

Results

The prevalence of MB-2 canal in the maxillary first and second molars are 51.3% and 29.8% respectively. Both males and females have a similar prevalence of MB-2 canals in the maxillary first and second molars. The incidence of MB-2 canals in both maxillary first and second molars significantly decreases with increasing age. No significant correlation between the prevalence of MB-2 canals with different gender groups in the population.

Conclusions

It is crucial for clinicians to identify the presence of MB-2 canals when performing endodontic treatment of the maxillary first and second molars. Varying prevalence has been reported for different populations. Recognising this wide-ranging prevalence amongst different populations will allow for greater predictability in ensuring endodontic treatment success.

Evaluation of Root Anatomy and Canal Configuration of Human Permanent Maxillary First Molar Using Cone-Beam Computed Tomography: A Systematic Review

The aim of this paper is to review the literature on root canal configuration (RCC) and the frequency of occurrence of a second mesiobuccal canal (MB) in human permanent maxillary first molars where cone-beam computed tomography (CBCT) is used. Online electronic databases such as PubMed-Medline, Embase, Scopus and Cochrane Library were searched using appropriate keywords from the earliest available date until 12th June 2022, without restriction on language. In the mesiobuccal root, type I was the most frequent (33.29%), followed by types II and IV (27.18% and 26.36%, respectively). Moreover, 68.2% of maxillary first molars had a second MB canal. For both the distobuccal and palatal roots, type I was the most prevalent, with 99.08% and 97.83% occurrence, respectively. All other types were infrequent. Type I RCC is most frequent in all the roots of the maxillary first molars. Hence, care must be taken during biomechanical preparation of the MB roots.

Assessment of Mesiobuccal Canal Configuration, Prevalence and Inter-Orifice Distance at Different Root Thirds of Maxillary First Molars: A CBCT Study

Aim

The aims of this study were to assess the prevalence and configuration of the second mesiobuccal (MB2) canal in the mesiobuccal MB root of permanent maxillary first molars at different root levels in a Saudi sub-population using cone‑beam computed tomography (CBCT) and to measure the inter-orifice distance between MB & MB2 at the pulpal floor level.

Materials and Methods

This retrospective study was carried out on CBCT images of Saudi patients seen at King Abdul Aziz University. A total of 106 maxillary first molars were evaluated using a specialized software program (iCAT CBCT software). The prevalence of MB2, canal configuration and location of joining (apical-middle-coronal), if present was calculated. Also, the inter-orifice distance between both canals was measured at the level of the pulpal floor. Chi‑square and one-way analysis of variance (ANOVA) were used.

Results

The MB2 canal was found in 92 (86.8%) maxillary first molar teeth. The MB and MB2 canals were joined in 61 (58%) cases, where the location of joining was 14 (23%), 17 (27%), and 31 (50%) in the coronal, middle, and apical third, respectively. The mean inter-orifice distance between both canals at the level of the pulpal floor was 2.52±0.76 mm.

Conclusion

The prevalence of MB2 canal in this Saudi sub-population was high. The prevalence decreased as the root canal approached the apical third. There was no correlation between the average distance and occurrence of canal joining. CBCT is useful in detecting and mapping the mesiobuccal root canal system, with a likelihood of enhancing the quality of root canal treatment.