Direct electrochemistry of cholesterol oxidase on MWCNTs

Cholesterol oxidase immobilized inulin based nanocomposite as the sensing material for cholesterol in biological and food samples

In the present study, inulin based nanocomposite viz., TiO₂-MWCNT@Inulin was prepared by embedding Inulin (a biopolymer extracted from Allium sativum L.) with TiO₂ and MWCNTs. The morphology of the prepared nanocomposite was characterized by High Resolution transmission electron microscopy (HRTEM). Cholesterol oxidase (ChOx) enzyme was then immobilized into the nanocomposite and the immobilization was examined by UV-vis and FT-IR spectral studies. The ChOx immobilized nanocomposite was integrated into carbon paste (CP) matrix to prepare the working electrode for the sensing of cholesterol. Electrochemical characterization of the modified CP/TiO₂-MWCNT@Inulin/ChOx electrode was done by cyclic voltammetric (CV) and electrochemical impedance spectroscopic (EIS) studies. Differential pulse voltammetric (DPV) studies were carried out to determine the concentration of cholesterol at the interface of the newly fabricated electrode. The fabricated electrode demonstrated a linear range from 83 μM to 14.28 mM, low limit of detection (35 μM), good sensitivity (21.26 μA mM^-1  cm^-2), low K_m (0.49 mM), high stability (120 days) and good selectivity. The presence of Inulin biopolymer played a vital role in attaching ChOx enzyme firmly to the nanocomposite thereby enhancing the stability and electron transfer efficiency of the electrode. The analysis of product that was formed within the electrochemical cell during the electrochemical oxidation of cholesterol was performed by using sodium nitroprusside. This resulted in a deep purple coloured solution which suggested the electrochemical conversion of cholesterol to cholestenone. The practical applicability of the fabricated electrode was also assessed by the determination of cholesterol in spiked blood serum and milk samples.

Development of a Sensitive Electrochemical Enzymatic Reaction-Based Cholesterol Biosensor Using Nano-Sized Carbon Interdigitated Electrodes Decorated with Gold Nanoparticles

We developed a versatile and highly sensitive biosensor platform. The platform is based on electrochemical-enzymatic redox cycling induced by selective enzyme immobilization on nano-sized carbon interdigitated electrodes (IDEs) decorated with gold nanoparticles (AuNPs). Without resorting to sophisticated nanofabrication technologies, we used batch wafer-level carbon microelectromechanical systems (C-MEMS) processes to fabricate 3D carbon IDEs reproducibly, simply, and cost effectively. In addition, AuNPs were selectively electrodeposited on specific carbon nanoelectrodes; the high surface-to-volume ratio and fast electron transfer ability of AuNPs enhanced the electrochemical signal across these carbon IDEs. Gold nanoparticle characteristics such as size and morphology were reproducibly controlled by modulating the step-potential and time period in the electrodeposition processes. To detect cholesterol selectively using AuNP/carbon IDEs, cholesterol oxidase (ChOx) was selectively immobilized via the electrochemical reduction of the diazonium cation. The sensitivity of the AuNP/carbon IDE-based biosensor was ensured by efficient amplification of the redox mediators, ferricyanide and ferrocyanide, between selectively immobilized enzyme sites and both of the combs of AuNP/carbon IDEs. The presented AuNP/carbon IDE-based cholesterol biosensor exhibited a wide sensing range (0.005–10 mM) and high sensitivity (~993.91 µA mM⁻¹ cm⁻²; limit of detection (LOD) ~1.28 µM). In addition, the proposed cholesterol biosensor was found to be highly selective for the cholesterol detection.

A novel chemiluminescence sensor for sensitive detection of cholesterol based on the peroxidase-like activity of copper nanoclusters

A sensitive and selective chemiluminescence (CL) sensor based on the peroxidase-like activity of copper nanoclusters was established for the detection of cholesterol. Copper nanoclusters catalyse the CL reaction between luminol and H₂O₂. Because H₂O₂ is the oxidative product of cholesterol in the presence of cholesterol oxidase, the oxidation of cholesterol can be quantitatively converted to a CL response by combining the two reactions. The proposed method is simple and can be completed in a few minutes with high sensitivity. Under the optimal conditions, the CL intensity was proportional to the concentration of cholesterol over a wide range of 0.05-10 mM, with a detection limit of 1.5 μM. Furthermore, the method was successfully applied to determine cholesterol in milk powder and human serum with satisfactory accuracy and precision. This method expands the applications of nano-mimic enzymes in the field of CL-based sensors.

A biocompatible cerasome based platform for direct electrochemistry of cholesterol oxidase and cholesterol sensing

An electrochemical platform composed of a biocompatible cerasome and cholesterol oxidase for cholesterol sensing.

Direct electrochemistry of cholesterol oxidase and biosensing of cholesterol based on PSS/polymeric ionic liquid–graphene nanocomposite

In this work, a new biosensor based on PSS/polymeric ionic liquids–graphene nanocomposite with excellent conductivity, favourable biocompatibility and good film-forming properties was constructed to detect cholesterol.

Bionanotechnology approach for FAD-dependent enzymes with nanomaterials sensor

We have reported the modification of biomolecule with nanomaterials. In this paper, the electrochemical response of different FAD-dependent enzymes at carbon nanomaterials modified electrode. The modified electrode also exhibits a promising enhanced electrocatalytic activity toward the oxidation of substrate. Different methods were used for fabrication of modified electrode. The presence of nanomaterials enhances the enzyme loading and stability. Cyclic voltammograms (CVs) were used for the determination of substrate and the apparent coefficient values for these compounds at different electrodes. Finally, we have studied the surface morphology of the modified electrode using scanning electron microscopy (SEM), which revealed that enzyme is coated on nanomaterials.

Cerium oxide-graphene as the matrix for cholesterol sensor

A simple and sensitive electrogenerated chemiluminescence (ECL) cholesterol biosensor was prepared based on cerium oxide-graphene (CeO(2)-graphene) composites as an efficient matrix. CeO(2)-graphene composites were prepared by depositing CeO(2) onto graphene and were characterized by scanning electron microscopy. The experimental results demonstrated that CeO(2)-graphene could catalyze the ECL of a luminol-H(2)O(2) (hydrogen peroxide) system to amplify the luminol ECL signal greatly. In addition, the use of CeO(2)-graphene provided a better biocompatible microenvironment for the immobilized enzyme, resulting in excellent stability and a long lifetime of the ECL biosensor. The surface assembly process, ECL behaviors, and electrochemistry of the biosensor were investigated in detail. The quantity of cholesterol was in the linear range from 12 μM to 7.2 mM with a detection limit of 4.0 μM (signal/noise = 3). In addition, the biosensor exhibited outstanding reproducibility, long-term stability, and selectivity. Moreover, this cholesterol biosensor offers an alternative analytical method with low cost and high speed.

Immobilization of lipase on cotton cloth using the layer-by-layer self-assembly technique

Lipase from Thermomyces lanuginosus was assembled into multiple layers on polyethylenimine treated cotton flannel cloth, utilising the enzymes property of forming bimolecular aggregates via layer-by-layer (LBL) immobilization technique. An increase in lipase activity with increasing enzyme layers confirmed lipase aggregation. A study to compare the activity of enzyme bound by classical LBL technique, containing alternate layers of polyethylenimine and lipase and the modified approach indicated above, showed that more enzyme was bound to cloth in the modified approach. A total of 13 U/cm(2) of enzyme were bound to cloth till the fifth layer whereas only 10.2 U/cm(2) were bound till the fifth bilayer in the classical approach. The successful assembly of lipase molecules has shown that this modified technique is a promising approach to immobilize enzymes that aggregate through hydrophobic interactions as nano-films on cloth.