Electrochemical oxidation of nitrite: Kinetic, mechanistic and analytical study by square wave voltammetry

Lab- and pilot-scale wet scrubber study on the redox-mediated simultaneous removal of NOx and SO2 using a CaCO3-based slurry with KI as a redox catalyst

This study presents a novel approach that integrates ozone-driven chemical oxidation to convert NO into soluble NO2, followed by the simultaneous absorption of NO2 and SO2 into a CaCO3-based slurry using the redox catalyst potassium iodide (KI). Using cyclic voltammetry, we demonstrate the redox properties of the I2/2I- couple, which facilitates NO2 reduction into soluble NO2- and catalyst regeneration through sulfite (SO32-)-driven reduction, thus establishing a closed catalytic cycle within the components of flue gas. In lab-scale wet-scrubbing tests, we explore the effect of various operational parameters (i.e., KI concentration, pH, and SO2 concentration), with a 15 h stability test demonstrating >60% NOx and >99% SO2 removal efficiency when the pH is controlled between 7.5 and 8.5. A successful pilot-scale implementation conducted at an inlet flow rate of 1000 m3 h-1 further confirmed the reproducibility of the proposed redox-catalytic cycle. Our study offers a cost-effective, sustainable, and scalable solution for effectively mitigating NOx and SO2 emissions at low temperatures.

The enhanced electrocatalytic performance of nanoscopic Cu6Pd12Fe12 heterometallic molecular box encaged cytochrome c

Designing molecular cages for atomic/molecular scale guests is a special art used by material chemists to harvest the virtues of the otherwise vile idea known as "the cage". In recent years, there has been a notable surge in research investigations focused on the exploration and utilization of the distinct advantages offered by this art in the advancement of efficient and stable bio-electrocatalysts. This usually is achieved through encapsulation of biologically accessible redox proteins within specifically designed molecular cages and matrices. Herein, we present the first successful method for encaging cytochrome c (Cyt-c), a clinically significant enzyme system, inside coordination-driven self-assembled Cu6Pd12Fe12 heterometallic hexagonal molecular boxes (Cu-HMHMB), in order to create a Cyt-c@Cu-HMHMB composite. 1H NMR, FTIR, and UV-Vis spectroscopy, ICP-MS, TGA and voltammetric investigations carried out on the so-crafted Cyt-c@Cu-HMHMB bio-inorganic composite imply that the presented strategy ensures encaging of Cyt-c in a catalytically active, electrochemically stable and redox-accessible state inside the Cu-HMHMB. Cyt-c@Cu-HMHMB is demonstrated to exhibit excellent stability and electrocatalytic activity toward very selective, sensitive electrochemical sensing of nitrite exhibiting a limit of detection as low as 32 nanomolar and a sensitivity of 7.28 μA μM-1 cm-2. Importantly, Cyt-c@Cu-HMHMB is demonstrated to exhibit an excellent electrocatalytic performance toward the 4ē pathway oxygen reduction reaction (ORR) with an onset potential of 0.322 V (vs. RHE) and a Tafel slope of 266 mV dec-1. Our findings demonstrate that Cu-HMHMB is an excellent matrix for Cyt-c encapsulation. We anticipate that the entrapment-based technique described here will be applicable to other enzyme systems and Cyt-c for various electrochemical and other applications.

Sensitive electrochemical sensor based on nickel/PDDA/reduced graphene oxide modified screen-printed carbon electrode for nitrite detection

A simple, rapid method of the determination of nitrite in food samples is reported by using a highly sensitive electrochemical sensor based on nickel, poly(diallyldimethylammonium chloride) (PDDA), reduced graphene oxide (rGO) and a disposable screen-printed carbon electrode (SPCE). The method is based on a modification of the electrode to enhance the sensitivity and selectivity of the disposable and applicable SPCE, which is essential for the present analytical challenge. The nitrite determination was performed by using a cyclic voltammetry (CV) method under optimum conditions. Ni/PDDA/rGO/SPCE showed a linear working range of 6 to 100 μM of nitrite concentration. The limit of detection and limit of quantification were 1.99 μM (S/N = 3) and 6.6 μM (S/N = 10), respectively. The sensitivities were 0.453 μA μM^-1 cm^-2 for the lower concentration range and 0.171 μA μM^-1 cm^-2 for the higher concentration range. The Ni/PDDA/rGO sensor also showed excellent anti-interference ability and good long-term stability. The purposed disposable sensor was successfully applied to determine nitrite in sausages and pickled vegetable samples with satisfactory recovery.

Photo-induced green synthesis of bimetallic Ag/Pd nanoparticles decorated reduced graphene oxide/nitrogen-doped graphene quantum dots nanocomposite as an amperometric sensor for nitrite detection

The present study introduces a novel nanocomposite based on reduced graphene oxide, nitrogen-doped graphene quantum dots, and palladium and silver nanoparticles (rGO/NGQD/AgPd) as an electrocatalyst toward nitrite oxidation reaction. Metal nanoparticles were prepared via a green one-pot photochemical reduction procedure utilizing UV light and NGQD simultaneously as a reducing and directing agent. Formation of the nanocomposite was thoroughly demonstrated by the FT-IR, XRD, Raman, XPS, FE-SEM, and TEM characterization tests. Various electrochemical tests evaluated the efficiency of the prepared sensing platform on the surface of a gold working electrode. Sensitivity and limit of detection (LOD) were calculated to be 0.854 μA.μM^-1.cm^-2 and 0.052 μM, respectively, from the chronoamperometry data. Finally, the proposed sensor was successfully applied for the determination of nitrite ions in river and mineral water samples as natural water sources.

The oxidative reactivity of three manganese(III) porphyrin complexes with hydrogen peroxide and nitrite toward catalytic nitration of protein tyrosine

Understanding the toxicological properties of MnIII-porphyrins (MnTPPS, MnTMPyP, or MnTBAP) can provide important biochemical rationales in developing them as the therapeutic drugs against protein tyrosine nitration-induced inflammation diseases. Here, we present a comprehensive understanding of the pH-dependent redox behaviors of these MnIII-porphyrins and their structural effects on catalyzing bovine serum albumin (BSA) nitration in the presence of H2O2 and NO2-. It was found that both MnTPPS and MnTBAP stand out in catalyzing BSA nitration at physiologically close condition (pH 8), yet they are less effective at pH 6 and 10. MnTMPyP was shown to have no ability to catalyze BSA nitration under all tested pHs (pH 6, 8, and 10). The kinetics and active intermediate determination through electrochemistry method revealed that both the pH-dependent redox behavior of the central metal cation and the antioxidant capability of porphin derivative contribute to the catalytic activities of three MnIII-porphyrins in BSA nitration in the presence of H2O2/NO2-. These comprehensive studies on the oxidative reactivity of MnIII-porphyrins toward BSA nitration may provide new clues for searching the manganese-based therapeutic drugs against the inflammation-related diseases.

Heterostructural CuO-ZnO Nanocomposites: A Highly Selective Chemical and Electrochemical NO2 Sensor

A simple one-step chemical method is employed for the successful synthesis of CuO(50%)-ZnO(50%) nanocomposites (NCs) and investigation of their gas sensing properties. The X-ray diffraction studies revealed that these CuO-ZnO NCs display a hexagonal wurtzite-type crystal structure. The average width of 50-100 nm and length of 200-600 nm of the NCs were confirmed by transmission electron microscopic images, and the 1:1 proportion of Cu and Zn composition was confirmed by energy-dispersive spectra, i.e., CuO(50%)-ZnO(50%) NC studies. The CuO(50%)-ZnO(50%) NCs exhibit superior gas sensing performance with outstanding selectivity toward NO2 gas at a working temperature of 200 °C. Moreover, these NCs were used for the indirect evaluation of NO2 via electrochemical detection of NO2 - (as NO2 converts into NO2 - once it reacts with moisture, resulting into acid rain, i.e., indirect evaluation of NO2). As compared with other known modified electrodes, CuO(50%)-ZnO(50%) NCs show an apparent oxidation of NO2 - with a larger peak current for a wider linear range of nitrite concentration from 20 to 100 mM. We thus demonstrate that the as-synthesized CuO(50%)-ZnO(50%) NCs act as a promising low-cost NO2 sensor and further confirm their potential toward tunable gas sensors (electrochemical and solid state) (Scheme 1).

A synthetic chemist's guide to electroanalytical tools for studying reaction mechanisms

Monitoring reactive intermediates can provide vital information in the study of synthetic reaction mechanisms, enabling the design of new catalysts and methods. Many synthetic transformations are centred on the alteration of oxidation states, but these redox processes frequently pass through intermediates with short life-times, making their study challenging. A variety of electroanalytical tools can be utilised to investigate these redox-active intermediates: from voltammetry to in situ spectroelectrochemistry and scanning electrochemical microscopy. This perspective provides an overview of these tools, with examples of both electrochemically-initiated processes and monitoring redox-active intermediates formed chemically in solution. The article is designed to introduce synthetic organic and organometallic chemists to electroanalytical techniques and their use in probing key mechanistic questions.

Can the mechanical activation (polishing) of screen-printed electrodes enhance their electroanalytical response?

The mechanical activation (polishing) of screen-printed electrodes (SPEs) is explored and shown to exhibit an improved voltammetric response (in specific cases) when polished with either commonly available alumina slurry or diamond spray. Proof-of-concept is demonstrated for the electrochemical sensing of nitrite where an increase in the voltammetric current is found using both polishing protocols, exhibiting an improved limit of detection (3σ) and a two-fold increase in the electroanalytical sensitivity compared to the respective un-polished counterpart. It is found that mechanical activation/polishing increases the C/O ratio which significantly affects inner-sphere electrochemical probes only (whereas outer-sphere systems remain unaffected). Mechanical activation/polishing has the potential to be a simple pre-treatment technique that can be extended and routinely applied towards other analytes for an observable improvement in the electroanalytical response.

Detection of nitrite based on fluorescent carbon dots by the hydrothermal method with folic acid

A fluorescent carbon dots probe for the detection of aqueous nitrite was fabricated by a one-pot hydrothermal method, and the transmission electron microscope, X-ray diffractometer, UV-Vis absorption spectrometer and fluorescence spectrophotometer were used to study the property of carbon dots. The fluorescent property of carbon dots influenced by the concentration of aqueous nitrite was studied. The interaction between the electron-donating functional groups and the electron-accepting nitrous acid could account for the quenching effect on carbon dots by adding aqueous nitrite. The products of the hydrolysis of aqueous nitrite performed a stronger quenching effect at lower pH. The relationship between the relative fluorescence intensity of carbon dots and the concentration of nitrite was described by the Stern-Volmer equation (I0/I - 1 = 0.046[Q]) with a fine linearity (R2 = 0.99). The carbon dots-based probe provides a convenient method for the detection of nitrite concentration.

Fourier transform large amplitude alternating current voltammetry investigations of the split wave phenomenon in electrocatalytic mechanisms

Fourier transform large amplitude alternating current voltammetry (FTACV) studies are reported on an electrocatalytic (EC') mechanistic system which exhibits split wave behavior on both macro- and micro-size working electrodes. The electrochemical characteristics of the EC' mechanism were analysed using the fundamental to fourth harmonic components deduced by the Fourier transform algorithm. The effects of the sinusoidal frequencies of the applied potential, electrode geometry and substrate concentrations are investigated. The split wave phenomenon was observed and explored particularly.

A miniaturized fiber-optic colorimetric sensor for nitrite determination by coupling with a microfluidic capillary waveguide

A microfluidic-capillary-waveguide-coupled fiber-optic sensor was developed for colorimetric determination of hazardous nitrite based on the Griess-Ilosvay reaction. The sensor was modularly designed by use of a light-emitting diode as the light source, silica fiber as the light transmission element, and a capillary waveguide tube as the light reaction flow cell. With the light interacting with the azo dye generated by the Griess-Ilosvay reaction between nitrite and Griess reagents, nitrite could be determined by a colorimetric method according to Beer's law. By use of the inexpensive and micro-sized elements mentioned above, the sensor provided a new low-cost and portable method for in situ and online measurement of nitrite. The sensor had a wide linear range for nitrite from 0.02 to 1.8 mg L(-1) and a low detection limit of 7 μg L(-1) (3σ), with a relative standard deviation of 0.37% (n = 10). With a low reagent demand of 200 μL, a short response time of 6.24 s, and excellent selectivity, the sensor is environmentally friendly and has been applied to nitrite determination in different water samples. The results were compared with those obtained by conventional spectrophotometry and ion chromatography, indicating the sensor's potential for practical applications.

A mechanistic study of the EC′ mechanism – the split wave in cyclic voltammetry and square wave voltammetry

In this paper, a detailed investigation of electrochemical reactions coupled with homogenous chemical steps using cyclic voltammetry (CV) and square wave voltammetry (SWV) was carried out to study the electrocatalytic (EC′) mechanism.

Nitrite ion-induced fluorescence quenching of luminescent BSA-Au(25) nanoclusters: mechanism and application

Fluorescence quenching is an interesting phenomenon which is highly useful in developing fluorescence based sensors. A thorough understanding of the fluorescence quenching mechanism is essential to develop efficient sensors. In this work, we investigate different aspects governing the nitrite ion-induced fluorescence quenching of luminescent bovine serum albumin stabilized gold nanoclusters (BSA-Au NCs) and their application for detection of nitrite in urine. The probable events leading to photoluminescence (PL) quenching by nitrite ions were discussed on the basis of the results obtained from ultraviolet-visible (UV-Vis) absorption spectroscopy, X-ray photoelectron spectroscopy (XPS), fluorescence measurements, circular dichroism (CD) spectroscopy, zeta potential and dynamic light scattering (DLS) studies. These studies suggested that PL quenching mainly occurred through the oxidation of Au(0) atoms to Au(i) atoms in the core of BSA-Au NCs mediated by nitrite ions. The interference caused by certain species such as Hg(2+), Cu(2+), CN(-), S(2-), glutathione, cysteine, etc. during the nitrite determination by fluorescence quenching was eliminated by using masking agents and optimising the conditions. Based on these findings we proposed a BSA-Au NC-modified membrane based sensor which would be more convenient for the real life applications such as nitrite detection in urine samples. The BSA-Au NC-modified nitrocellulose membrane (NCM) enabled the detection of nitrite at a level as low as 100 nM in aqueous solutions. This Au NC-based paper probe was validated to exhibit good performance for nitrite analysis in environmental water and urine samples, which makes it useful in practical applications.

A colorimetric nitrite detection system with excellent selectivity and high sensitivity based on Ag@Au nanoparticles

NO₂⁻ could be directly detected with high sensitivity and excellent selectivity by visualizing the color change of a dispersion of Ag@AuNPs with the unaided eye.

Self-assembly of hybridized ligands on gold nanodots: tunable photoluminescence and sensing of nitrite

Highly photoluminescent gold nanodots (Au NDs) via etching and co-deposition of hybridized ligands [11-mercaptoundecanol (11-MU) and its complexes with amphiphilic ligands] on gold nanoparticles (∼3 nm) have been prepared and employed for the detection of nitrite based on the analyte-induced photoluminescence quenching.

Polyoxometalate-reduced graphene oxide hybrid catalyst: synthesis, structure, and electrochemical properties

The deposition of polyoxometalate (POM) on chemically reduced graphene oxide sheets was carried out through electron transfer interaction and electrostatic interaction between POM and graphene sheets to make a heterogeneous catalyst in aqueous media. Well dispersed individual phosphomolybdic acid (PMo) clusters were observed by electron microscopy and atomic force microscopy measurements. The interaction between polyoxometalate and the graphene sheet was confirmed by using various spectroscopic methods such as FT-IR, UV-vis, and Raman. The UV-visible, IR, and cyclic voltammetry results revealed alteration of the electronic structure of deposited PMo as a result of strong interaction with the graphene oxide surface. Electrochemical properties of the PMo-rGO catalyst were investigated in an aqueous acidic electrolyte. The hybrid catalyst showed enhanced electro-oxidation of nitrite compared with pure homogeneous PMo and rGO.

New approach to electrode kinetic measurements in square-wave voltammetry: amplitude-based quasireversible maximum

The influence of the potential pulse height of square-wave voltammetry (SWV) (i.e., the SW amplitude) is studied for a variety of quasireversible electrode mechanisms, including a simple solution-phase electrode reaction at a planar or spherical electrode, a solution phase electrode reaction coupled with a reversible follow-up chemical reaction, and a diffusionless surface confined electrode reaction. The electrode kinetics of all the electrode mechanisms depends critically on the SW amplitude, and the quasireversible kinetic region is a function of both frequency-related electrode kinetic parameters and the SW amplitude. Thus, a novel methodology for electrode kinetics measurements is proposed by altering the SW amplitude only, at a fixed frequency of the SW potential modulation, that is, at a constant scan rate of the voltammetric experiment. Electrode kinetic measurements at a constant SW frequency are of exceptional importance especially when complex electrode mechanisms are studied, which depend on several frequency-related kinetic parameters. The electrode kinetic measurements are based on a novel feature termed the "amplitude-based quasireversible maximum", manifested as a parabolic dependence of the amplitude-normalized net SW peak current versus the SW amplitude. The position of the amplitude-based quasireversible maximum depends on the standard rate constant of the electrode reaction, enabling estimation of this important kinetic parameter in a simple and fast procedure. The novel quasireversible maximum is attributed to all studied electrode mechanisms, implying that it is a general feature of most electrode mechanisms under conditions of SWV.

A joint experimental and computational search for authentic nano-electrocatalytic effects: electrooxidation of nitrite and L-ascorbate on gold nanoparticle-modified glassy carbon electrodes

The investigation of electrocatalytic nanoeffects is tackled via joint electrochemical measurements and computational simulations. The cyclic voltammetry of electrodes modified with metal nanoparticles is modeled considering the kinetics of the electrochemical process on the bulk materials of the different regions of the electrode, that is, the substrate (glassy carbon) and the nanoparticles (gold). Comparison of experimental and theoretical results enables the detection of changes in the electrode kinetics at the nanoscale due to structural and/or electronic effects. This approach is applied to the experimental assessment of electrocatalytic effects by gold nanoparticles (Au NPs) in the electrooxidation of nitrite and L-ascorbate. Glassy carbon electrode is modified with Au NPs via seed-mediated growth method. Divergence between the kinetics of these processes on gold macroelectrodes and gold nanoparticles is examined. Whereas claimed catalytic effects are not observed in the electrooxidation of nitrite, electrocatalytic nanoeffects are verified in the case of L-ascorbate. This is probably due to that the electron transfer process follows an adsorptive mechanism. The combination of simulation with experiments is commended as a general strategy of authentification, or not, of nanoelectrocatalytic effects.