Sensitive simultaneous determination of diethylstilbestrol and bisphenol A based on Bi2WO6 nanoplates modified carbon paste electrode

Determination of diethylstilbestrol in environmental water based on electrochemical senser modified with vanadium based metal organic framework material composite

In this research, the MIL-47/ACET/Nafion/GCE electrochemical senser for the determination of diethylstilbestrol (DES) was prepared with vanadyl sulfate (VOSO4·nH2O) and terephthalic acid (H2BDC) as the main raw materials, compounded with acetylene black (ACET) and perfluorosulfonic acid polymer (Nafion). The compound DES belongs to the category of estrogens, and prolonged exposure to the environment can have detrimental effects on the physiological functioning of both humans and animals. Due to the strong DES enrichment performance of MIL-47(V-MOFs) with large specific surface area, in addition to the excellent conductivity and electrocatalysis of composite materials, this modified senser had good electrochemical response to DES. With differential pulse voltammetry, in optimum condition of 0.1 M NaH2PO4-Na2HPO4at pH = 7.0, potential interval of -1.0 to 1.0 V, enrichment time of 120 s and enrichment potential of 0.2 V, there was a good linear relationship between peak current and the concentration of DES over the range of 0.1 and 50μM, and the limit of detection was 0.008μM. The sensor accurately detected DES in actual water samples, with recovery rates ranging from 89.21% to 105.3%. The electrochemical sensor was simple to prepare and had practical significance for the detection of DES in water. The research results of the sensor provide another alternative analytical means for the sensitive detection of DES in the environment, which is important for maintaining public health.

Fabrication of a novel biosensor for biosensing of bisphenol A and detection of its damage to DNA

In this work, a novel electrochemical biosensor has been fabricated based on step-by-step modification of a glassy carbon electrode (GCE) with methylene blue (MB)-DNA/multiwalled carbon nanotubes (MWCNTs)-chitosan (CS)/palladium nanoparticles (Pd NPs)/fullerene C₆₀ (C₆₀) for voltammetric and impedimetric detection of DNA damage induced by bisphenol A (BPA). Modifications applied to the GCE were characterized by cyclic voltammetry (CV), differential pulse voltammetry (DPV), electrochemical impedance spectroscopy (EIS) and scanning electron microscopy. The EIS and DPV responses of the biosensor were increased and decreased, respectively, by the DNA damage induced by BPA which led us to develop novel systems for detection of DNA damage. Our records confirmed that the biosensor was able to rapid and sensitive detection of DNA damage induced by BPA. Finally, according to the developed systems for detection of DNA damage, we have developed voltammetric and impedimetric methods for determination of BPA.

Zinc/Aluminium⁻Quinclorac Layered Nanocomposite Modified Multi-Walled Carbon Nanotube Paste Electrode for Electrochemical Determination of Bisphenol A

This paper presents the application of zinc/aluminium-layered double hydroxide-quinclorac (Zn/Al-LDH-QC) as a modifier of multiwalled carbon nanotubes (MWCNT) paste electrode for the determination of bisphenol A (BPA). The Zn/Al-LDH-QC/MWCNT morphology was examined by a transmission electron microscope and a scanning electron microscope. Electrochemical impedance spectroscopy was utilized to investigate the electrode interfacial properties. The electrochemical responses of the modified electrode towards BPA were thoroughly evaluated by using square-wave voltammetry technique. The electrode demonstrated three linear plots of BPA concentrations from 3.0 × 10⁻⁸–7.0 × 10⁻⁷ M (R² = 0.9876), 1.0 × 10⁻⁶–1.0 × 10⁻⁵ M (R² = 0.9836) and 3.0 × 10⁻⁵–3.0 × 10⁻⁴ M (R² = 0.9827) with a limit of detection of 4.4 × 10⁻⁹ M. The electrode also demonstrated good reproducibility and stability up to one month. The presence of several metal ions and organic did not affect the electrochemical response of BPA. The electrode is also applicable for BPA determination in baby bottle and mineral water samples with a range of recovery between 98.22% and 101.02%.

Advances in sensing and biosensing of bisphenols: A review

Bisphenols (BPs) are well known endocrine disrupting chemicals (EDCs) that cause adverse effects on the environment, biotic life and human health. BPs have been studied extensively because of an increasing concern for the safety of the environment and for human health. They are major raw materials for manufacturing polycarbonates, thermal papers and epoxy resins and are considered hazardous environmental contaminants. A vast array of sensors and biosensors have been developed for the sensitive screening of BPs based on carbon nanomaterials (carbon nanotubes, fullerenes, graphene and graphene oxide), quantum dots, metal and metal oxide nanocomposites, polymer nanocomposites, metal organic frameworks, ionic liquids and molecularly imprinted polymers. This review is devoted mainly to a variety of sensitive, selective and reliable sensing and biosensing methods for the detection of BPs using electrochemistry, fluorescence, colorimetry, surface plasmon resonance, luminescence, ELISAs, circular dichroism, resonance Rayleigh scattering and adsorption techniques in plastic products, food samples, food packaging, industrial wastes, pharmaceutical products, human body fluids and many other matrices. It summarizes the advances in sensing and biosensing methods for the detection of BPs since 2010. Furthermore, the article discusses challenges and future perspectives in the development of novel sensing methods for the detection of BP analogs.

Electrochemical sensing of bisphenol using a multilayer graphene nanobelt modified photolithography patterned platinum electrode

An electrochemical sensor has been developed for the detection of Bisphenol-A (BPA) using photolithographically patterned platinum electrodes modified with multilayer graphene nanobelts (GNB). Compared to bare electrodes, the GNB modified electrode exhibited enhanced BPA oxidation current, due to the high effective surface area and high adsorption capacity of the GNB. The sensor showed a linear response over the concentration range from 0.5 μM-9 μM with a very low limit of detection = 37.33 nM. In addition, the sensor showed very good stability and reproducibility with good specificity, demonstrating that GNB is potentially a new material for the development of a practical BPA electrochemical sensor with application in both industrial and plastic industries.

A novel electrochemical aptasensor for bisphenol A assay based on triple-signaling strategy

Based on a triple-signaling strategy, a novel electrochemical aptasensor has been developed for sensitive and selective detection of bisphenol A (BPA). The thiolated ferrocene (Fc)-modified BPA-binding aptamer probe (Fc-P) was immobilized on the gold electrode and then hybridized with the methylene blue (MB)-modified complementary DNA probe (MB-P) to form a rigid double-stranded DNA (ds-DNA). The specific interaction between BPA and Fc-P led to the release of MB-P from the sensing interface and the conformational change of Fc-P. As a result, the oxidation peak currents of Fc and BPA increased with the increase of the concentration of target (BPA) according to the "signal-on" mode while that of MB decreased with the increase of the BPA concentration according to the "signal-off" mode. By superimposing the triple signal changes, BPA was detected sensitively with a linear range from 1 pM to 100 pM. The detection limit is 0.19 pM, and much lower than that obtained by most of the reported electrochemical methods. The aptasensor also exhibited satisfactory specificity, selectivity, reproducibility and stability. By changing the specific aptamers, this strategy could be easily extended to detect other redox targets, showing promising applications in environmental analysis, food safety monitoring, and bioanalysis.

Construction of a nanostructure-based electrochemical sensor for voltammetric determination of bisphenol A

A novel carbon paste electrode modified with graphene oxide nanosheets and an ionic liquid (n-hexyl-3-methylimidazolium hexafluoro phosphate) was fabricated. The electrochemical study of the modified electrode, as well as its efficiency for voltammetric oxidation of bisphenol A, is described. The electrode was also employed to study the electrochemical oxidation of bisphenol A, using cyclic voltammetry, chronoamperometry, square wave voltammetry and electrochemical impedance spectroscopy as diagnostic techniques. Square wave voltammetry exhibits a linear dynamic range from 9.0 × 10(-8) to 2.5 × 10(-4) M and a detection limit of 55.0 nM for bisphenol A. Finally, this new sensor was used for determination of bisphenol A in water samples using the standard addition method.

Electrochemical sensing of bisphenol A by graphene-1-butyl-3-methylimidazolium hexafluorophosphate modified electrode

Simple and low cost sensor for the determination of bisphenol A (BPA) based on graphene-1-butyl-3-methylimidazolium hexafluorophosphate (BmimPF6) modified glassy carbon electrode was developed. It was an irreversible oxidation process of BPA on the modified electrode. Experimental conditions such as modified volume, pH, scan rate and accumulation time have been optimized. The modified electrode provided a considerable enhancement of BPA oxidation. The electrochemical response of BPA on this modified electrode was better than those on the graphene modified electrode and bare electrode. The detection limit of BPA was 8nM (S/N=3), the linear range was from 20nM to 2µM. The modified electrode has been employed for determination of milk and soda spiked BPA successfully.

Azo dye functionalized graphene nanoplatelets for selective detection of bisphenol A and hydrogen peroxide

A new electrochemical sensor is developed based on graphene nanoplatelets functionalized with tri-azo dye (direct blue 71) for selective and highly sensitive detection of bisphenol A and hydrogen peroxide in pH 7 phosphate buffered saline solution.