Enhanced amperometric sensing for direct detection of nitenpyram via synergistic effect of copper nanoparticles and nitrogen-doped graphene

A dual-emitting fluoroprobe fabricated by aloe leaf-based N-doped carbon quantum dots and copper nanoclusters for nitenpyram detection in waters by virtue of inner filter effect and static quenching principles

Fluorescence sensing technique has been used in environmental analysis due to its simplicity, low cost, and visualization. Although the fruit pulp-based biomass carbon quantum dots (CQDs) have excellent luminescent properties, aloe leaves possess the superiority of being easily accessible in all seasons compared to fruit pulp. Thus, we fabricated Aloe carazo leaf-based nitrogen doping-CQDs (N-CQDs) using a facile hydrothermal approach, which emitted bright blue fluorescence with a quantum yield of 21.4 %. By comparison, the glutathione-encapsulated copper nanoclusters (GSH-CuNCs) displayed strong red fluorescence. A blue/red dual emission based on the N-CQDs/CuNCs mixture was established for nitenpyram detection. At the 350-nm excitation, the N-CQD/CuNCs system produced dual-wavelength emitting peaks at 440 and 660 nm, respectively. Moreover, when nitenpyram was introduced into the system, the fluorescence intensities (FIs) of N-CQDs significantly decreased, whereas the FIs of GSH-CuNCs varied slightly; simultaneously, the solution color changed from bright blue to dark red. Both the spectral overlapping between nitenpyram's UV-Vis absorption and N-CQDs' excitation and almost unchanged fluorescence lifetimes indicated the occurrence of inner-filtering effect (IFE) in the dual-emitting fluoroprobe. In addition, the Stern-Volmer constant (Ksv = 6.92 × 103 M-1), temperature effect, as well as UV-Vis absorption of N-CQD/CuNCs before and after the addition of nitenpyram corroborated the static-quenching behavior. Consequently, the fluorescence-quenching of N-CQDs by nitenpyram was attributable to the joint IFE and static-quenching principles. A good linearity existed between the F660/F440 values and nitenpyram concentrations (0.5-200 μM) with a method detection limit of 0.15 μM. The dual-emitting fluoroprobe provided the satisfactory recoveries (95.0%-107.0 %) for nitenpyram detection in real-world waters, which were comparable with the results of traditional liquid chromatography coupled to tandem mass spectrometry method. Owing to its simple operations, low-cost, and adaptability for on-site outdoor monitoring, the newly developed dual-emitting fluoroprobe possesses great potential applications in routine monitoring of nitenpyram under field conditions.

Smartphone-Assisted EY@MOF-5-Based Dual-Emission Fluorescent Sensor for Rapid On-Site Detection of Daclatasvir and Nitenpyram

Fluorescent metal-organic frameworks (MOFs) are promising sensing materials with tunable and robust structural properties and remarkable luminescent capabilities. In this study, a novel dual-emission fluorescent metal-organic framework (EY@MOF-5) composite is synthesized by a one-pot bottle-around-ship approach. Eosin Y (EY) is encapsulated in MOF-5 to enhance its fluorescence properties and selectivity, effectively addressing typical MOF-5 limitations. EY@MOF-5 serves as a versatile dual-functional fluorescent sensor for two different analytes, daclatasvir (DCT) and nitenpyram (NTP), showing an impressive linear range of 10-200 nM and 0.1-300 μM, with detection limits of 233 pM and 65 nM, respectively. The established method is ultrafast, highly sensitive, and extremely selective for DCT and NTP detection in complex biological and food samples. Fluorescence results are compared and validated with the recommended UPLC method. Then, a smartphone-integrated sensing system is introduced for on-site, real-time, and quantitative analysis of DCT and NTP. The smartphone-assisted intelligent sensing method manifests promising results for DCT and NTP monitoring in biological and food samples, demonstrating its promising potential for the on-site detection of biologically and environmentally significant analytes.

A scientometric study on application of electrochemical sensors for detection of pesticide using graphene-based electrode modifiers

Pesticide testing is an important topic in environmental protection and food safety. The development of green, accurate and reliable pesticide residue detection methods is an important technical support for implementing of agricultural quality supervision. Electrochemical sensors are a very promising analytical method for pesticide detection due to their high sensitivity, speed, low cost and portability. Performance enhancement of electrochemical sensors is often accompanied by research advances in materials science. Among them, carbon material is a very important electrode material for the fabrication of electrochemical sensors. The discovery of graphene makes it the most promising candidate among carbon materials for sensor performance enhancement. The topic of this review is the use of graphene-modified electrochemical sensors for pesticide detection in the last decade. Traditional literature summaries and bibliometric analyses were used for an in-depth analysis of this topic. In addition to the introduction of different sensor types and performance comparisons, this review also parses the authors' country, keywords and publication frequency. The related research experienced rapid growth several years ago and has now reached a relatively stable stage. We also discuss the perspectives on this topic.

Effective nitenpyram detection in a dual-walled nitrogen-rich In(iii)/Tb(iii)–organic framework

A heterometallic MOF probe with the advantages of strong fluorescence, simple synthesis, high density of Lewis acidic and basic sites, and repeatable use, has been designed and synthesized, which exhibits a rapid and sensitive reaction to nitenpyram.

Photocatalytic degradation of a typical neonicotinoid insecticide: nitenpyrum by ZnO nanoparticles under solar irradiation

The photodegradation and mineralization of the nitenpyrum [(E)-N-(6-chloro-3-pyridylmethyl)-N-ethyl-N'-methyl-2-nitrovinylidenediamine], which is one of the most popular neonicotinoid insecticides, were conducted in the presence of ZnO photocatalyst under solar irradiation. An initial nitenpyrum concentration of 10 ppm was completely degraded in the presence of ZnO after 30 min irradiation, while only 70% degradation was observed in the absence of ZnO. The effect of different parameters, for example, amount of ZnO, initial pH, light intensity, reaction temperature, and irradiation time, on the photocatalytic degradation of nitenpyrum was also evaluated. The drop of total organic carbon (TOC) as a consequence of mineralization of nitenpyrum was observed during the photocatalytic process. The kinetics of photocatalytic degradation followed a pseudo-first order law according to Langmuir-Hinshelwood model, and the rate constant is 0.140 min^-1. CO₂, chloride, and nitrate ions were observed as the end-products after completing degradation of nitenpyrum. The four kinds of intermediate products were identified by GC-MS during the decomposition of nitenpyrum. In order to investigate the degradation pathway of nitenpyrum, the point charge and frontier electron density at each atom on the molecule were determined using molecular orbital (MO) stimulation. The degradation mechanism was proposed, based on the identified intermediates. The solar photocatalytic degradation method can become an effective technique for the treatment of nitenpyrum-polluted water.

Nitenpyram disturbs gut microbiota and influences metabolic homeostasis and immunity in honey bee (Apis mellifera L.)

Recently, environmental risk and toxicity of neonicotinoid insecticides to honey bees have attracted extensive attention. However, toxicological understanding of neonicotinoid insecticides on gut microbiota is limited. In the present study, honey bees (Apis mellifera L.) were exposed to a series of nitenpyram for 14 days. Results indicated that nitenpyram exposure decreased the survival and food consumption of honey bees. Furthermore, 16S rRNA gene sequencing revealed that nitenpyram caused significant alterations in the relative abundance of several key gut microbiotas, which contribute to metabolic homeostasis and immunity. Using high-throughput RNA-Seq transcriptomic analysis, we identified a total of 526 differentially expressed genes (DEGs) that were significantly altered between nitenpyram-treated and control honey bee gut, including several genes related to metabolic, detoxification and immunity. In addition, Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway analysis showed nitenpyram affected several biological processes, of which most were related to metabolism. Collectively, our study demonstrates that the dysbiosis of gut microbiota in honey bee caused by nitenpyram may influence metabolic homeostasis and immunity of bees, and further decrease food consumption and survival of bees.

Photochemistry of Solid Films of the Neonicotinoid Nitenpyram

The environmental fates of nitenpyram (NPM), a widely used neonicotinoid insecticide, are not well-known. A thin solid film of NPM deposited on a germanium attenuated total reflectance (ATR) crystal was exposed to radiation from a low-pressure mercury lamp at 254 nm, or from broadband low pressure mercury photolysis lamps centered at 350 or 313 nm. The loss during photolysis was followed in time using FTIR. The photolysis quantum yields (ϕ), defined as the number of NPM molecules lost per photon absorbed, were determined to be (9.4 ± 1.5) × 10^-4 at 350 nm, (1.0 ± 0.3) × 10^-3 at 313 nm, and (1.2 ± 0.4) × 10^-2 at 254 nm (±2σ). Imines, one with a carbonyl group, were detected as surface-bound products and gaseous N₂O was generated in low (11%) yield. The UV-vis absorption spectra of NPM in water was different from that in acetonitrile, dichloromethane, and methanol, or in a thin solid film. The photolytic lifetime of solid NPM at a solar zenith angle at 35° is calculated to be 36 min, while that for NPM in water is 269 min, assuming that the quantum yield is the same as in the solid. Thus, there may be a significant sensitivity to the medium for photolytic degradation and the lifetime of NPM in the environment.

Spectroscopic studies of interaction between CuO nanoparticles and bovine serum albumin

Recently, the great interests in manufacturing and application of metal oxide nanoparticles in commercial and industrial products have led to focus on the potential impact of these particles on biomacromolecules. In the present study, the interaction of copper oxide (CuO) nanoparticles with bovine serum albumin (BSA) was studied by spectroscopic techniques. The zeta potential value for BSA and CuO nanoparticles with average diameter of around 50 nm at concentration of 10 μM in the deionized (DI) water were -5.8 and -22.5 mV, respectively. Circular dichroism studies did not show any changes in the content of secondary structure of the protein after CuO nanoparticles interaction. Fluorescence data revealed that the fluorescence quenching of BSA by CuO nanoparticles was the result of the formed complex of CuO nanoparticles - BSA. Binding constants and other thermodynamic parameters were determined at three different temperatures. The hydrogen bond interactions are the predominant intermolecular forces to stabilize the CuO nanoparticle - BSA complex. This study provides important insight into the interaction of CuO nanoparticles with proteins, which may be of importance for further application of these nanoparticles in biomedical applications.