CuCo 2 O 4 based economical electrochemical sensor for the nanomolar detection of hydrazine and metol

Construction of Co-ZIF-derived CoS2@Cu hollow heterogeneous nanotube array for the detection of hydrazine in environmental water samples

As a neurotoxin, it is necessary to establish a low cost, stable and sensitive method for the quantitative detection of hydrazine. Using Co-ZIF (zeolite imidazole framework) nanorods as precursor, CoS2 hollow nanotube array heterogeneous structure loaded with Cu nanoparticles were prepared on carbon cloth (CC) by etching, calcination and plasma magnetron sputtering (CoS2@Cu HNTA/CC). As a self-supporting electrode, its hollow heterogeneous structure provides a large area of electron transfer channel for the oxidation of the food pollutant hydrazine. In addition, bimetallic synergies and in situ N doping regulated the electronic structure of CoS2@Cu HNTA/CC, and thus significantly improved the electrical conductivity and catalytic activity. As an efficient hydrazine sensor with a wide linear range of 1 μM L-1-10 mM (1 μM-1 mM and 1 mM-10 mM), its sensitivity and the limit of detection are 7996 μA mM-1 cm-2, 3772 μA mM-1 cm-2 and 0.276 μM (S/N = 3), respectively. This study provides a new strategy for the construction of MOFs (Metal Organic Framework)-derived bimetallic composites and their application in electrochemical sensing.

Supercritical CO2 mediated construction of aluminium waste recovered γ-Al2O3 impregnated Dracaena trifasciata biomass-derived carbon composite: A robust electrocatalyst for mutagenic pollutant detection

Inspired by the waste-to-wealth concept, we have recovered the gamma phase aluminium oxide nanoparticles (γ-Al2O3 NPs) from waste aluminium (Al) foils and fabricated a composite with Dracaena trifasciata biomass-derived activated carbon matrix (DT-AC) using supercritical carbon-di-oxide (SC-CO2) pathway. The prepared samples are characterized altogether by various micro- and spectroscopic analyses. Based on the results, the recovered γ-Al2O3 NPs are well impregnated in the DT-AC surface by the action of the microbubble effect from the SC-CO2. The higher D-band and ID/IG value of 1.07 in the Al2O3/DT-AC nanocomposite indicate increased defects and the amorphous nature of the carbon materials. The effect of scan rate (ν) demonstrated greater linearity in ν1/2 vs peak current in the electrochemical detection study of the mutagenic pollutant 4-(methylamino) phenol hemi sulfate, showing a quasi-reversible electron transfer process undergoing diffusion-controlled kinetics. Furthermore, the limit of detection is determined to be 3.2 nM L-1 with an extensive linear range, spanning from 0.05 to 618.25 µM/L. The incredible sensitivity of 2.117 μA μM-1 cm-2, along with excellent selectivity, repeatability, and stability, is observed. Further, the respectable recovery percentage of 98.61 % in the environmental water sample is perceived. The observed outcomes suggest that the prepared Al2O3/DT-AC composite performs as an excellent electrocatalyst material, and the processing techniques used are thought to be sustainable in nature.

Electrochemical Sensors Based on Transition Metal Materials for Phenolic Compound Detection

Electrochemical sensors have been recognized as crucial tools for monitoring comprehensive chemical information, especially in the detection of a significant class of molecules known as phenolic compounds. These compounds can be present in water as hazardous analytes and trace contaminants, as well as in living organisms where they regulate their metabolism. The sensitive detection of phenolic compounds requires highly efficient and cost-effective electrocatalysts to enable the development of high-performance sensors. Therefore, this review focuses on the development of advanced materials with excellent catalytic activity as alternative electrocatalysts to conventional ones, with a specific emphasis on transition metal-based electrocatalysts for the detection of phenolic compounds. This research is particularly relevant in diverse sectors such as water quality, food safety, and healthcare.

Fabrication of an electrochemical aptasensor for the determination of sarcosine based on synthesized CuCo2O4 nanosheets

Sarcosine (SRN) detection in body fluids is related to the diagnosis of prostate cancer. However, the development of SRN biosensors has been limited due to the low concentration of SRN in body fluids. Here, a new electrochemical strategy for selective and accurate determination of SRN in urine samples is reported. CuCo2O4 nanosheets (CuCo2O4 NSs) have been synthesized and used as a new platform in the design of efficient electrochemical aptasensors for prostate cancer diagnosis. As far as we know, CuCo2O4 NSs have not been used so far in electrochemical aptasensor design. The presence of CuCo2O4 NSs on the electrode surface as a platform improves the conductivity and surface area. Therefore, it can be very effective in improving the diagnostic performance of the electrochemical aptasensor. The linear concentration range and limit of detection (LOD) for this strategy were calculated to be 1 pM- 8 μM and 350 fM, respectively.

Exchanging Anion in CuCo-Carbonate Double Hydroxide for Faradaic Supercapacitors: A Case Study

A systematic synthetic method involving the anion exchange process was designed and developed to fabricate the superior functioning three-dimensional (3-D) urchin-architectured copper cobalt oxide (CuCo₂O₄; CCO) and copper cobalt sulfide (CuCo₂S₄; CCS) electrode materials from copper-cobalt carbonate double hydroxide [(CuCo)₂(CO₃)(OH)₂; CCH]. The effective tuning of chemical, crystalline, and morphological properties was achieved during the derivatization process of CCH, based on the anion exchange effect and phase transformation without altering the 3-D spatial assembly. Benefiting from morphological and structural advantages, CCO and CCS exhibited superior electrochemical activity with capacity values of 1508 and 2502 C g^-1 at 10 A g^-1 to CCH (1182 C g^-1 at 10 A g^-1). The thermal treatment of CCH has generated a highly porous nature in nanospikes of 3-D urchin CCO structures, which purveys betterment in electrochemical phenomena than pristine smooth-surfaced CCH. Meanwhile, the sulfurization reaction induced the anion effect to a greater extent in the CCS morphology, resulting in hierarchical 3-D urchins formed by 1-D nanospikes constituting coaxially swirled 2-D nanosheets with high exposure of active sites, specific surface areas, and 3-D electron/ion transportation channels. The asymmetric supercapacitor was constructed with a superior CCS electrode as a cathode and an activated carbon electrode as an anode, showing a high specific capacity of 287.35 C g^-1 at 7 A g^-1 and durability for 5000 cycles with 94.2% retention at a high current density of 30 A g^-1. The ultrahigh energy and power density of 135.3 W h kg^-1 (10 A g^-1) and 44.35 kW kg^-1 (30 A g^-1) were harvested during the PC device performance. Our finding proposes an idea about the importance of anions and phase transformation as a versatile tool for engineering high-functioning electrode materials and their endeavor toward overwhelming the major demerit of SCs by aggrandizing the energy density value and rate performance.

Simple Preparation and Characterization of Hierarchical Flower-like NiCo2O4 Nanoplates: Applications for Sunset Yellow Electrochemical Analysis

The current work was performed to construct a novel electrochemical sensing system for determination of sunset yellow via the modification of screen-printed graphite electrode modified with hierarchical flower-like NiCo₂O₄ nanoplates (NiCo₂O₄/SPGE). The prepared material (hierarchical flower-like NiCo₂O₄ nanoplates) was analyzed by diverse microscopic and spectroscopic approaches for the crystallinity, composition, and morphology. Chronoamperometry, differential pulse voltammetry, linear sweep voltammetry, and cyclic voltammetry were used for determination of the electrochemical behavior of sunset yellow. The as-fabricated sensor had appreciable electro-catalytic performance and current sensitivity in detecting the sunset yellow. There were some advantages for NiCo₂O₄/SPGE under the optimized circumstances of sunset yellow determination, including a broad dynamic linear between 0.02 and 145.0 µM, high sensitivity of 0.67 μA/(μM.cm²), and a narrow limit of detection of 0.008 μM. The practical applicability of the proposed sensor was verified by determining the sunset yellow in real matrices, with satisfactory recoveries.

Noble-metal-free Fe3O4/Co3S4 nanosheets with oxygen vacancies as an efficient electrocatalyst for highly sensitive electrochemical detection of As(III)

The electrochemical method for highly sensitive determination of arsenic(III) in real water samples with noble-metal-free nanomaterials is still a difficult but significant task. Here, an electrochemical sensor driven by noble-metal-free layered porous Fe₃O₄/Co₃S₄ nanosheets was successfully employed for As(III) analysis, which was prepared via a facile two-step method involves a hydrothermal treatment and a subsequent sulfurization process. As expected, the electrochemical detection of As(III) in 0.1 M HAc-NaAc (pH 6.0) by square wave anodic stripping voltammetry (SWASV) with a considerable sensitivity of 4.359 μA/μg·L^-1 was obtained, which is better than the commonly used noble metals modified electrodes. Experimental and characterization results elucidate the enhancement of As(III) electrochemical performance could be attributed to its nano-porous structure, the presence of oxygen vacancies and strong synergetic coupling effects between Fe₃O₄ and Co₃S₄ species. Besides, the Fe₃O₄/Co₃S₄ modified screen printed carbon electrode (Fe₃O₄/Co₃S₄-SPCE) shows remarkable stability and repeatability, valuable anti-interference ability and could be used for detection in real water samples. Consequently, the results confirm that as-prepared porous Fe₃O₄/Co₃S₄ nanosheets is identified as a promising modifier to detect As(III) in real sample analysis.

Amperometric determination of ecotoxic N-methyl-p-aminophenol sulfate in photographic solution and river water samples based on graphene oxide/CeNbO4 nanocomposite catalyst

The electronic conductivity of the metal oxides is generally increased by hybridization of highly conductive carbon supportive materials. In this present work, we have demonstrated a novel one-pot preparation of cerium niobate (CeNbO₄) nanoparticles embedded with graphene oxide (GO/CeNbO₄) composite, for ultrasensitive detection of the photographic developing agent, metol (MTL). The as-prepared GO/CeNbO₄ was analyzed by various characterization techniques. The intensive characterization techniques were used to affirm the detailed structural moiety, size, morphology, and surface area of GO/CeNbO_4. The GO/CeNbO₄ modified glassy carbon electrode (GCE) affords a superior electrocatalytic activity toward MTL. The obtained amperometric response on the GO/CeNbO₄/GCE holding an extremely low level detection of 10 nM and superior sensitivity of 10.97 µA µM^-1 cm^-2 toward MTL detection. Besides, the GO/CeNbO₄/GCE also gives excellent selectivity, stability, repeatability, and reproducibility. We achieved excellent recovery results in real photographic solution and river water samples analysis with great accuracy. This work offers a novel insight into the growth of the carbon-based niobate family with electrochemical sensor applications.

CuCo2O4 nanoparticles wrapped in a rGO aerogel composite as an anode for a fast and stable Li-ion capacitor with ultra-high specific energy

To meet practical application requirements, high specific energy and specific power and excellent cyclability are highly desired.

Novel CuCo2O4 Composite Spinel with a Meso-Macroporous Nanosheet Structure for Sulfate Radical Formation and Benzophenone-4 Degradation: Interface Reaction, Degradation Pathway, and DFT Calculation

A series of CuCo₂O₄ composite spinels with an interconnected meso-macroporous nanosheet morphology were synthesized using the hydrothermal method and subsequent calcination treatment to activate peroxymonosulfate (PMS) for benzophenone-4 (BP-4) degradation. As-prepared CuCo₂O₄ composite spinels, especially CuCo-H3 prepared by adding cetyltrimethylammonium bromide, showed superior reactivity for PMS activation. In a typical reaction, BP-4 (10.0 mg/L) was almost completely degraded in 15 min by the activation of PMS (200.0 mg/L) using CuCo-H3 (100.0 mg/L), with only 9.2 μg/L cobalt leaching detected. Even after being used six times, the performance was not influenced by the lower leaching of ions and surface-absorbed intermediates. The possible interface mechanism of PMS activation by CuCo-H3 was proposed, wherein a unique interconnected meso-macroporous nanosheet structure, strong interactions between copper and cobalt, and cycling of Co(II)/Co(III) and Cu(I)/Cu(II) effectively facilitated PMS activation to generate SO₄^•- and ^•OH, which contributed to BP-4 degradation. Furthermore, combined with intermediates detected by liquid chromatography quadrupole time-of-flight mass spectrometry and density functional theory calculation results, the degradation pathway of BP-4 involving hydroxylation and C-C bond cleavage was proposed.

3D Copper Foam-Supported CuCo₂O₄ Nanosheet Arrays as Electrode for Enhanced Non-Enzymatic Glucose Sensing

CuCo₂O₄ anchored on Cu foam (CuCo₂O₄/CF) with polycrystalline features was fabricated by a mild process based on solvothermal reaction and subsequent calcination in this work. The structure and morphology of the obtained materials were thoroughly characterized by X-ray diffraction, X-ray photoelectron spectroscopy, field-emission scanning electron microscopy, and transmission electron microscopy. According to the above analysis, the morphology of the CuCo₂O₄ was nanosheet arrays. Meanwhile, the CuCo₂O₄ was grown on Cu foam successfully. The CuCo₂O₄/CF displayed good electrochemical properties for glucose detection at a linear range from 0 mM to 1.0 mM. Meanwhile, the detection limit was as low as 1 μM (S/N = 3), and the sensitivity was 20,981 μA·mM⁻¹·cm⁻². Moreover, the selectivity and the stability were tested with excellent results. This nanomaterial could show great potential application in electrochemical sensors.

Selective hydrazine sensor fabrication with facile low-dimensional Fe2O3/CeO2 nanocubes

Here, the binary-doped metal oxides of Fe₂O₃/CeO₂ nanocubes were prepared using reliable hydrothermal process, which is applied to fabricate an efficient and selective hydrazine chemical sensor shows good analytical sensing performances as well as validated the sensor prove with the environmental and extracted real samples.

MnFe2O4@nitrogen-doped reduced graphene oxide nanohybrid: an efficient bifunctional electrocatalyst for anodic hydrazine oxidation and cathodic oxygen reduction

A bifunctional MnFe₂O₄/N-rGO composite synthesized hydrothermally in a single step is demonstrated for hydrazine oxidation and oxygen reduction.