Improvement of electrochemical performance of tin dioxide electrodes through manganese and antimony co-doping

Stabilized Hf-doped Ti/Sb-SnO2 electrode for efficient degradation of tetracycline

The electrochemical advanced oxidation process (EAOP) has shown significant promise in the field of refractory organic wastewater treatment due to its high efficiency and environmentally friendly nature. In this study, Ti/Sb-SnO2 electrodes with varying proportions of Hf were prepared using the sol-gel method. The addition of Hf transformed the original collapsing and broken surface into a flat and regular surface. The results demonstrated that Ti/Sb-SnO2-Hf electrode doped with 6% Hf exhibited a higher oxygen evolution potential (OEP) and excellent stability. The OEP increased from 2.315 V without Hf-doping to 2.482 V, and the corresponding actual life was 321.05% higher than that without Hf. The current density (5-40 mA·cm-2), electrolyte concentration (0.02-0.2 mol·L-1), pH (3-11), and initial pollutant concentration (5-80 mg·L-1) were evaluated to confirm the tetracycline (TC) degradation characterization of Ti/Sb-SnO2-6%Hf electrodes. It was concluded that under the optimal degradation conditions, the removal rate of TC could reach 99.66% within 2 h. The degradation of TC follows first-order reaction kinetics. The oxidative degradation of TC was achieved through indirect oxidation, with ·OH playing a dominant role. TC's electrochemical oxidation degradation pathway has been proposed: Based on LC-MS results, three main pathways are speculated. During the electrocatalytic oxidation process, decarboxylation, deamidation, and ring-opening reactions occur under ·OH attack, producing intermediate compounds with m/z values of 427, 433, 350, 246, 461, 424, 330, 352, 309, 263, and 233. These intermediates are further oxidized to intermediate compounds with an m/z value of 218. This work introduces a new efficient anode electrochemical catalyst for the degradation of TC, providing a strategy for industrial applications.

One-step synthesis of Pt-Nd co-doped Ti/SnO2-Sb nanosphere electrodes used to degrade nitrobenzene

Ti/SnO2-Sb electrodes possess high catalytic activity and efficiently degrade nitrobenzene (NB); however, their low service life limits their wide application. In this study, we used one-step hydrothermal synthesis to successfully prepare Pt-Nd co-doped Ti/SnO2-Sb nanosphere electrodes. Scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy were applied to characterize the surface morphology, microstructure, and chemical composition of the electrodes, respectively. The electrochemical activity and stability of the electrodes were characterized via linear sweep and cyclic voltammetry, electrochemical impedance spectroscopy, and an accelerated service life test; their performance for NB degradation was also studied. An appropriate amount of Pt-Nd co-doping refined the average grain size of SnO2 and formed a uniform and compact coating on the electrode surface. The oxygen evolution potential, total voltammetric charge, and electron transfer resistance of the Ti/SnO2-Sb-Nd-Pt electrodes were 1.88 V, 3.77 mC/cm2, and 11.50 Ω, respectively. Hydroxy radical was the main active radical species during the electrolytic degradation of nitrobenzene with Ti/SnO2-Sb-Nd-Pt. After Pt-Nd co-doping, the accelerated service life of the electrodes was extended from 8.0 min to 78.2 h (500 mA/cm2); although the NB degradation rate decreased from 94.1 to 80.6%, the total amount of theoretical catalytic degradation of NB in the effective working time increased from 17.4 to 8754.1 mg/cm2. These findings reveal good application potential for the electrodes and provide a reference for developing efficient and stable electrode materials.

Efficient degradation of polyacrylamide using a 3-dimensional ultra-thin SnO2-Sb coated electrode

Polyacrylamide (PAM) is widely used in polymer flooding processes to increase oil recovery while the byproduct of PAM-containing wastewater is a serious environmental issue. In this study, electrochemical oxidation process (EAOP) was applied for treating PAM wastewater using a new type of 3-dimensional ultra-thin SnO₂-Sb electrode. Nano-sized catalysts were evenly dispersed both on the surface and inside of a porous Ti filter forming nano-thickness catalytic layer that enhances the utilization and bonding of catalysts. This porous Ti electrode showed 20% improved OH· production and 16.3 times increased accelerated service life than the planar Ti electrode. Using this electrode to treat 100 mg L^-1 PAM, the TOC removal efficiency reached over 99% within 3 h under current density of 20 mA cm^-2. The EAOP could fastly break the long-chain PAM molecules into small molecular intermediates. With the porous electrode treating 5 g L^-1 PAM under current density of 30 mA cm^-2, EAOP reduced 94.2% of average molecular weight in 1 h and 92.0% of solution viscosity in 0.5 h. Moreover, the biodegradability of PAM solution was significantly improved as the solution BOD₅/COD ratio raised from 0.05 to 0.41 after 4 h treatment. The degradation pathway of PAM was also investigated.

Preparation of Ti/SnO2-Sb/Rare Earth Electrodes Containing Different Contents of Ni Intermediate Layer for Efficient Electrochemical Decolorization of Rhodamine B

Water contamination by dyes discharged from many industries is an environmental issue of great matter. Electrochemical oxidation is an advanced approach for wastewater treatment. In this study, the composite electrodes of Ti/SnO2-Sb-Ni/rare earth have been modified using rare earth elements (Re) Gd, Ce, Eu, and Er and various molar ratios of tin and nickel intermediate layer, and their electrochemical oxidation effects were scrutinized. To analyze the decolorization performance of the electrodes, Rhodamine B (RhB) dye was utilized as a target pollutant. Accelerated life testing indicated that the longer service life could be observed in Ni (3.5%)/Re and Ni (5%)/ Re electrodes compared with other modified Ni (0%, 1%, and 2%)/Re electrodes. Compared with the color removal efficiencies of the Ni (2%)/Re electrodes, the decolorization rate of 90% after treatment for 60 min and the low energy consumption of 3.621 kW h·m−3 can be achieved at the Ni (2%)/Gd electrode under the experimental condition of 100 mg·L−1 RhB. The best decolorization rate was observed at the Ni (2%)/Re electrodes among other Ni and no adding Ni-doped Re electrodes. The characterization of the electrodes was described, consisting of surface morphology, oxygen evolution potential, and a crystallographic and elemental combination of the coatings.

Facile sealing treatment with stannous citrate complex to enhance performance of electrodeposited Ti/SnO2-Sb electrode

Ti/SnO₂-Sb is a promising anode for electrochemical advanced oxidation process with advantages of low cost and no secondary pollution, while suffers from low work economy due to the short service life. In this study, a facile strategy was proposed to fabricate Ti/SnO₂-Sb electrode with high oxidation ability and long service life based on novelly sealing electrodeposited Sn-Sb coating with stannous citrate complex. The treated Ti/SnO₂-Sb electrode exhibited an accelerated service life of 41.5 h (100 mA cm^-2; 0.5 M H₂SO₄) and a degradation rate constant for methylene blue dye of 1.02 h^-1 which were respectively 11.9 and 2.5 times as that of the untreated electrode. It was found out that the complex could well repair the coating defects inside or outside and form a covering film to tighten the coating, and was then mineralized during the following calcination process to achieve a uniform, rough and highly active SnO₂-Sb catalytic layer. The distinctive structure was confirmed by XRD, SEM, XPS and FT-IR. The sealing treatment could be achieved by in situ electrodepositing Sn-Sb coating from or ex situ dipping Sn-Sb coating in solution containing stannous citrate complex followed by drying in air. This study provided a novel, facile and effective strategy to enhance performance of Ti/SnO₂-Sb electrode that could be easily achieved in both laboratory and industrial scales and combined with other strategies.

Preparation of novel Ti-based MnOx electrodes by spraying method for electrochemical oxidation of Acid Red B

At different calcination conditions, titanium-based manganese oxides (MnO_x) electrodes were fabricated by spraying method without adhesive. The MnO_x/Ti electrodes were applied in electrochemical oxidation of wastewater treatment for the first time. The surface morphologies of electrodes were tested by scanning electron microscopy. The formation of different manganese oxidation states on electrodes was confirmed by X-ray diffraction and X-ray photoelectron spectroscopy. The electrochemical properties of the electrodes have been performed by means of cyclic voltammetry and electrochemical impedance spectroscopy. The characterizations revealed that the MnO_x/Ti-350(20) electrode, prepared at calcination temperature of 350 °C for 20 min, exhibited fewer cracks on the electrode surface, larger electrochemically effective surface area and lower charge transfer resistance than electrodes prepared at other calcination conditions. Moreover, Acid Red B was used as target pollutant to test the electrode activity via monitoring the concentration changes by UV spectrophotometer. The results showed that the MnO_x/Ti-350(20) electrode presented the best performance on decolorization of Acid Red B with the lowest cell potential during the process of electrochemical oxidation, and the chemical oxygen demand (COD) conversion was 50.7%. Furthermore, the changes of Acid Red B during the electrochemical oxidation process were proposed by the UV-vis spectra.