Fabrication of a novel electrochemical sensor based on Zn–In 2 O 3 nanorods coated glassy carbon microspheres paste electrode for square wave voltammetric determination of neuroprotective hibifolin in biological fluids and in the flowers of hibiscus vitifolius

Sensitive electrochemical determination of quercetin and folic acid with cobalt nanoparticle functionalized multi-walled carbon nanotube

A nanocomposite of cobalt nanoparticle (CoNP) functionalized carbon nanotube (Co@CNT) was prepared and used to modify a glassy carbon electrode (Co@CNT/GCE). Characterization indicates the morphology of Co@CNT is CoNPs adhering on CNTs. With the nano-interface, Co@CNT provides large surface area, high catalytic activity, and efficient electron transfer, which makes Co@CNT/GCE exhibiting satisfactory electrochemical response toward quercetin (QC) and folic acid (FA). The optimum pH values for the detection of FA and QC are 7.0 and 3.0, respectively. The saturated absorption capacity (Γ*) and catalytic rate constant (kcat) of Co@CNT/GCE for QC and FA are calculated as 1.76 × 10-9, 3.94 × 10-10 mol∙cm-2 and 3.04 × 102, 0.569 × 102 M-1∙s-1. The linear range for both FA and QC is estimated to be 5.0 nM-10 μM, and the LODs (3σ/s) were 2.30 nM and 2.50 nM, respectively. The contents of FA and QC in real samples determined by Co@CNT/GCE are comparable with the results determined by HPLC. The recoveries were in the range 90.5 ~ 114% and the total RSD was lower than 8.67%, which further confirms the reliability of the proposed electrode for practical use.

Subtle adjustment of the cyclic potential on electro-activated glassy carbon electrodes for sensitive sensing of methyl parathion

Facile electro-activated glassy carbon electrodes (e-GCEs), which are prepared in electrolyte solution with a certain potential for a few seconds, have been verified to improve analytical performance toward not a few electro-active molecules recently. Nevertheless, how and why the potential plays an important role is not clear, and has even not received enough consideration. In this paper, we found that the mode and the range of applied potential significantly impacted the sensitivity of methyl parathion (MP), which is a typical pesticide with the electro-active group of -NO2. Compared with constant potential, the e-GCE with cyclic potential provided a much more stable baseline during MP detection. Additionally, the electro-oxidation peak current of MP at around -0.1 V on it was higher than another changeable potential (constant current). What's more interesting, with cyclic potential for 50 segments from -2 to 1.5 V, the peak current value increased by 30 times in comparison with a bare GCE, but only 2 times from -2 to 1 V. Then after systematic investigation including structures of the electrode surface and functional groups, we speculated that the produced group of O-CO in the process of activation and remaining groups of C-O and CO on the bare GCE surface are beneficial for adsorbing MP molecules leading to enhanced peak current. Employing the proposed e-GCE, the limit of detection of MP reached 0.015 μM and the reproducibility was perfect. This work elucidates the potent impact of electro-activation potential parameters on electroanalysis behaviors.

Surface engineering of carbon microspheres with nanoceria wrapped on MWCNTs: a dual electrocatalyst for simultaneous monitoring of molnupiravir and paracetamol

In the present study, nanoceria-decorated MWCNTs (CeNPs@MWCNTs) were synthesized using a simple and inexpensive process. Molnupiravir (MPV) has gained considerable attention in recent years due to the infection of severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2). Since some people infected with COVID-19 experience fever and headaches, paracetamol (PCM) has been prescribed to relieve these symptoms. Therefore, there is an urgent need to monitor and detect these drugs simultaneously in pharmaceutical and biological samples. In this regard, we developed a novel sensor based on nanoceria-loaded MWCNTs (CeNPs@MWCNTs) for simultaneous monitoring of MPV and PCM. The incorporation of CeNPs@MWCNTs electrocatalyst into a glassy carbon microsphere fluorolube oil paste electrode (GCMFE) creates more active sites, which increase the surface area, electrocatalytic ability, and electron transfer efficiency. Interestingly, CeNPs@MWCNTs modified GCMFE demonstrated excellent detection limits (6.0 nM, 8.6 nM), linear ranges (5.0-5120 nM, 8.0-4162 nM), and sensitivities (78.6, 94.3 μA μM-1 cm-2) for simultaneous detection of MPV and PCM. The developed CeNPs@MWCNTs electrocatalyst modified GCMFE exhibited good repeatability, anti-interference capability, stability, and real-time analysis with good recovery results, which clearly indicates that it can be used for real-time industrial applications.

Application of electrochemical sensors based on nanomaterials modifiers in the determination of antipsychotics

At present, the content of antipsychotics in samples is always analyzed by traditional detection methods, including mass spectrometry (MS), spectrophotometry, fluorescence, capillary electrophoresis (CE). However, conventional methods are cumbersome and complex, require a large sample volume, many pre-processing steps, long analysis cycles, expensive instruments, and need well-trained detection capabilities personnel. In addition, patients with schizophrenia require frequent and painful blood collection procedures, which adds additional treatment costs and time burdens. In view of these factors, electrochemical methods have become the most promising candidate technology for timely analysis due to their low cost, simple operation, excellent sensitivity and specificity. As we all know, nanomaterials play an extremely important role in electrochemical sensing applications. As the sensor modifiers, nanomaterials enable electrochemical analysis to overcome the time-consuming and labor-intensive shortcomings of traditional detection methods, and greatly reduce the research cost. Nanomaterials modified electrodes can be used as sensors to determine the concentration of antipsychotics in organisms quickly and accurately, which is a bright spot in the application of nanomaterials. The combination of different nanomaterials can even form a nanocomposite with a synergistic effect. This paper firstly reviews the application of nanomaterials-modified sensors on the basis of research in the past ten years, reviews the use of nanomaterial-modified sensors to quickly and accurately determine the concentration of antipsychotics in biological samples, and demonstrates a new idea of using nanomaterials sensors for drug monitoring and determination. At the end of this review, a brief overview is given of the limitations and the future prospects of nanomaterial sensors for the determination of antipsychotics concentrations.

Joint Theoretical and Experimental Study on the La Doping Process in In2O3: Phase Transition and Electrocatalytic Activity

In₂O₃ and La³⁺-doped In₂O₃ nanostructures were synthesized through a facile and fast chemical route based on the microwave-assisted hydrothermal method combined with rapid thermal treatment in a microwave oven. The presence of the La³⁺ doping process modifies the size and morphology of the In₂O₃ nanostructures and also stabilizes the rhombohedral (rh) In₂O₃ phase with respect to the most stable cubic (bcc) polymorph. X-ray diffraction (XRD) patterns and Rietveld refinements, Raman, UV-vis, and energy dispersive X-ray (EDX) spectroscopies, transmission electron (TEM) and field-emission scanning electron (FE-SEM) microscopies, as well as PL emissions have been performed. To complement and rationalize the experimental results, first-principle calculations, based on density functional theory, are carried out to obtain the formation energies of the In₂O₃ and bcc- and rh-In₂O₃-doped phases, their geometry and electronic properties. Theoretical results are able to explain the relative stabilization of the rh-phase with respect to the bcc-phase based on the analysis geometry changes and the electronic redistribution induced by the La³⁺ doping process. In addition, Wulff construction is employed to match the theoretical and experimental morphologies of the cubic phase. The synthesized samples were applied for the O₂ evolution reaction (OER). The La³⁺-doped In₂O₃ film presents superior electrocatalytic activity, with an onset potential lower than the undoped In₂O₃ film that can be associated with the increase in electron density caused by the La³⁺ doping process. This study provides a versatile strategy for obtaining In₂O₃ and La³⁺-doped In₂O₃ nanostructures for practical applications.

A novel megestrol acetate electrochemical sensor based on conducting functionalized acetylene black-CeO2NPs nanohybrids decorated glassy carbon microspheres

For the first time, megestrol acetate (MGA), a synthetic progestin with therapeutic use in breast cancer, is electrochemically studied to propose a new electroanalytical alternative for its detection in real samples. In the present work, a novel electrochemical sensor based on functionalized acetylene black-CeO₂NPs nanohybrids modified glassy carbon microspheres paste electrode (FAB-CeO₂NPs/GCMPE) was successfully fabricated and used for sensitive determination of MGA. The modified electrode has been characterized using scanning electron microscope (SEM), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The electrocatalytic reduction of MGA using FAB-CeO₂NPs/GCMPE was carried out via CV and square wave voltammetry (SWV). By employing FAB-CeO₂NPs/GCMPE, the SWV signal of MGA reduction was 8 fold higher than the bare GCMPE. A wide concentration range from 4.20 × 10^-8 to 1.13 × 10^-6 M with the low LOD of 1.30 nM for MGA was achieved. The practical analytical utilities of the prospective FAB-CeO₂NPs/GCMPE sensor were demonstrated successfully by the detection of MGA in Megace tablets, human serum and urine samples obtained from healthy and patient volunteers after oral administration of 160 mg Megace tablets. HPLC method was also developed for comparison with the electroanalytical method.