A label-free impedimetric cytosensor based on galactosylated gold-nanoisland biointerfaces for the detection of liver cancer cells in whole blood

A Novel Liver Cancer POC Diagnostic Detection Technique by a Gate-engineered Source-extended TFET Device

This work reports a novel POC diagnostic technique to identify the cancerous liver cell lines by designing a Source-Extended (SE) Tunnel Field Effect Transistor (TFET) having a Single-Gate (SG) with Single-Metal (SM) and Dual-Metal (DM) structure. The proposed structures have been equipped with nanocavities by trenching the gate oxide layer where the needle biopsy obtained liver sample has been immobilized. The detection is based on the difference in drain current and the ratio of the proposed device's ON and OFF state currents, which has been evaluated by obtaining the sensitivities. The cancerous and non-cancerous liver cell lines possess different dielectric properties in high frequencies ranging from 100 MHz to 5 GHz, affecting the cavity region's effective capacitances. The change in the dielectric constant of the specimen at 900 MHz has been considered which results in the change in device drain current and device performance. Various parameters of the device, like the adhesive layer in the cavity region, the material of the gate, the length of the cavities, and the orientation of the cavities, have been modified to observe the performance. The total work has been done in the simulation environment, which includes the study considering the different proportions of cancerous and non-cancerous cells in a particular specimen. A comparative analysis has been made between the performance of the proposed SM and DM gate structure. The proposed detection method has been compared with the existing methods reported in the literature. The proposed method can be considered a novel technique and can be implemented as a point of care (POC) diagnostic to detect whether the specimen liver cell line is cancerous.

Highly sensitive detection of circulating tumour cells based on an ASV/CV dual-signal electrochemical strategy

Circulating tumour cells (CTCs), as a tumour marker, may provide more information in early diagnosis and accurate therapy of cancer patients. Electrochemical detection of CTCs has exhibited exceptional advantages. However, single-signal electrochemical detection usually has a high probability of false positives coming from interferents, operating personnel, and nonstandard analytical processes. Herein, a dual-signal strategy using anodic stripping voltammetry (ASV) and cyclic voltammetry (CV) for highly sensitive detection of CTCs was developed. When MCF-7 cells were present, aptamer DNA (DNA1)-magnetic beads (MBs) were captured by CTCs and detached from the biosensing electrodes. Following magnetic separation, polystyrene bead (PS)-CdS QDs labelled on MCF-7 cells were dissolved by HNO3 and the intensity of the oxidation peak current of Cd2+ ions was proportional to the amount of MCF-7 cells in ASV (y = 6.8929 lg Ccells + 1.0357 (Ccells, cells per mL; R2, 0.9947; LOD, 3 cells per mL)). Meanwhile, the anodic peak currents of the remaining electrode in CV were also proportional to the amount of MCF-7 cells (y = 3.7891 lg Ccells + 52.3658 (Ccells, cells per mL; R2, 0.9846; LOD, 3 cells per mL)). An ASV/CV dual-signal biosensor for electrochemical detection of CTCs was achieved, which overcame the limitations of any single-signal mode and improved the detection reliability and precision.

Recent Development of Nanomaterials-Based Cytosensors for the Detection of Circulating Tumor Cells

The accurate analysis of circulating tumor cells (CTCs) holds great promise in early diagnosis and prognosis of cancers. However, the extremely low abundance of CTCs in peripheral blood samples limits the practical utility of the traditional methods for CTCs detection. Thus, novel and powerful strategies have been proposed for sensitive detection of CTCs. In particular, nanomaterials with exceptional physical and chemical properties have been used to fabricate cytosensors for amplifying the signal and enhancing the sensitivity. In this review, we summarize the recent development of nanomaterials-based optical and electrochemical analytical techniques for CTCs detection, including fluorescence, colorimetry, surface-enhanced Raman scattering, chemiluminescence, electrochemistry, electrochemiluminescence, photoelectrochemistry and so on.

Fabrication of a cell-recognition/electron-transfer/cross-linker, peptide-immobilized electrode for the sensing of K562 cells

We designed an electrode that has the ability to sense a target cell. This new electrode is intended for use in cell recognition via electron-transfer and cross-linker peptide immobilization. Myelopeptide-4 (MP-4:FRPRIMTP) is a marrow-origin peptide that interacts with receptors of the human leukemia cell line (K562 cells), and allows their differentiation. The YYYYC electron-transfer peptide improves the electron-transfer accessibility from an electroactive compound to an electrode. Oligoalanine plays the role of a cross-linker that immobilizes a peptide series (Ac-FRPRIMTPYYYYCAAAAA) to collagen, which then allows it to be cast onto an electrode. Use of the electrode with a peptide increased the peak currents of [Fe(CN)₆]^4-/3- and also improved the reversibility of redox. These improvements are due to the interaction between [Fe(CN)₆]^4-/3- and the peptide. When electrochemical impedance spectroscopy (EIS) measurements were carried out using a collagen/peptide probe-immobilized electrode, the electron transfer resisitance was lower than that without the peptide. The detection of K562 cells was based on an increase in resistance, because MP-4 was bound to the receptors on the cell surface. The responses were linear and ranged in number from 27 to 2,000 cells/mLwith a detection limit of 8 cells/mL. Recoveries of 50 and 1,000 cells/mL in human serum were accomplished at rates of 98 and 101%, respectively. Consequently, the proposed procedure is a powerful new concept for cytosensing.

Hydrothermal synthesis of N,S co-doped carbon nanodots for highly selective detection of living cancer cells

This study presents a facile synthesis method for the preparation of positively charged N,S co-doped carbon nanodots with excellent optical properties, and it develops a selective method for fluorescent detection of living cancer cells. The specific recognition is due to the application of an aptamer sequence, which shows high affinity and specificity to target cells. The aptamer is firstly labeled with BHQ and wraps around the carbon nanodots, then it finally quenches the fluorescence emission of the carbon nanodots. For the sensitive and selective analysis of target cells, the cells are simply mixed with the carbon nanodot-aptamer nanoconjugates, which are then centrifuged at a low speed. The recognition reaction between aptamer and target cells releases the quencher from the surface of the carbon nanodots and the centrifugation process enables the recovery of fluorescence intensity of the suspension, which reflects the level of initial cancer cells. The developed method is simple, highly selective and cost-effective, thus, it may be further exploited in clinical applications in the future.

Label-free cytosensing of cancer cells based on the interaction between protein and an electron-transfer carbohydrate-mimetic peptide

We used an electron-transfer carbohydrate-mimetic peptide (YYYYC) to construct an electrochemical cytosensing system. Magnetic beads were modified with either asialofetuin (ASF) or soybean agglutinin (SBA) to evaluate the effect on cell sensing. Because SBA binds to the galactose residue that exists at the terminals of the carbohydrate chains in ASF, the target protein was accumulated on the protein magnetic beads. SBA is an example of N-acetylgalactosamine- and galactose-binding proteins that readily combine with YYYYC. When the peptides and protein-immobilized beads competed for a target protein, the peak current of the peptides changed according to the concentration of the protein at the 10^-12 M level. Next, human myeloid leukemia cells (K562 cell) were measured using the peptide and the carbohydrate chains on the cell surface that recognize SBA. The electrode response was linear to the number of K562 cells and ranged from 1.0 × 10² to 5.0 × 10³ cells mL^-1. In addition, detection of a human liver cancer cell (HepG2 cell) was carried out using interactions with the peptide, the ASF receptors in HepG2 cells, and the carbohydrate chains of ASF. The peak currents were proportional and ranged between 5.0 × 10¹ and 1.5 × 10³ cells mL^-1. When the values estimated from an electrochemical process were compared with those obtained by ELISA, the results were within the acceptable range of measurement error.

PVP-coated gold nanoparticles for the selective determination of ochratoxin A via quenching fluorescence of the free aptamer

This paper describes an aptamer/gold nanoparticle-based assay for ochratoxin A (OTA) detection. This assay is based on the use of an aptamer labeled with carboxyfluorescein (FAM) at its 5'-end and gold nanoparticles (AuNPs) that act as quenchers of fluorescence. When OTA is absent in the system, the fluorescently labeled aptamers are adsorbed on the surface of AuNPs. The fluorescence signal of the fluorescein-labeled OTA aptamer generated is quenched by the fluorescence resonance energy transfer effect of AuNPs. When OTA is present in the system, the fluorescently labeled aptamer binds to OTA and forms a folded structure, which can resist the adsorption of AuNPs. Thus, the fluorescent signal can be retained. The detection limit of this sensing platform is 5 nM, and the linear detection range is 10-1000 nM (R2 = 0.994). The procedure was validated by the quantitation of OTA in spiked ginger powder samples and were found to be free of interference by the sample matrix. The recoveries and the relative standard deviation varied from 89.0% to 117.8% and from 1.9% to 6.3%, respectively.