Performance and stability of chitosan-MWCNTs-laccase biocathode: Effect of MWCNTs surface charges and ionic strength

High electrolyte concentration effect on enzymatic oxygen reduction

The nature, the composition and the concentration of electrolytes is essential for electrocatalysis involving redox enzymes. Here, we discuss the effect of various electrolyte compositions with increasing ionic strengths on the stability and activity towards O₂ reduction of the bilirubin oxidase from Myrothecium verrucaria (Mv BOD). Different salts, Na₂SO₄, (NH₄)₂SO₄, NaCl, NaClO₄, added to a phosphate buffer (PB) were evaluated with concentrations ranging from 100 mM up to 1.7 M. On functionalized carbon nanotube-modified electrodes, it was shown that the catalytic current progressively decreased with increasing salt concentrations. The process was reversible suggesting it was not related to enzyme leakage. The enzyme was then immobilized on gold electrodes modified by self-assembling of thiols. When the enzyme was simply adsorbed, the catalytic current decreased in a reversible way, thus behaving similarly as on carbon nanotubes. Enzyme mobility at the interface induced by a modification in the interactions between the protein and the electrode upon salt addition may account for this behavior. When the enzyme was covalently attached, the catalytic current increased. Enzyme compaction is proposed to be at the origin of such catalytic current increase because of shorter distances between the first copper site electron acceptor and the electrode.

Investigation of GOx Stability in a Chitosan Matrix: Applications for Enzymatic Electrodes

In this study, we designed a new biosensing membrane for the development of an electrochemical glucose biosensor. To proceed, we used a chitosan-based hydrogel that entraps glucose oxidase enzyme (GOx), and we crosslinked the whole matrix using glutaraldehyde, which is known for its quick and reactive crosslinking behavior. Then, the stability of the designed biosensors was investigated over time, according to different storage conditions (in PBS solution at temperatures of 4 °C and 37 °C and in the presence or absence of glucose). In some specific conditions, we found that our biosensor is capable of maintaining its stability for more than six months of storage. We also included catalase to protect the biosensing membranes from the enzymatic reaction by-products (e.g., hydrogen peroxide). This design protects the biocatalytic activity of GOx and enhances the lifetime of the biosensor.

Laccase immobilized on amino-functionalized magnetic Fe3O4-SiO2 core-shell material for 2,4-dichlorophenol removal

In this study, an amino-functionalized magnetic silica microsphere material (Fe₃O₄-SiO₂-NH₂) was prepared. Using glutaraldehyde as a cross-linking agent, Trametes versicolor laccase was adsorbed-covalently bonded and immobilized on the material to prepare Laccase @ Fe₃O₄-SiO₂. In addition, the materials were characterized and analysed by SEM, TEM, XRD, FT-IR and VSM. Finally, the thermal inactivation dynamics of immobilized laccase in polar/non-polar/toxic systems and the adsorption and degradation of 2,4-DCP were studied. The results showed that Laccase @ Fe₃O₄-SiO₂ under the optimal conditions (pH 6, temperature 65°C, initial concentration of 2,4-DCP 10 mg/L), the removal rate was as high as 81.6%. Moreover, compared with free laccase, immobilized laccase had good tolerance under low pH and high-temperature conditions, and storage stability was also greatly improved. After repeated use for 7 times, Laccase @ Fe₃O₄-SiO₂ can still maintain 59% removal rate of 2,4-DCP, which gives it the potential for industrial applications.

Recent advances in carbon nanotubes-based biocatalysts and their applications

Enzymes have been incorporated into a wide variety of fields and industries as they catalyze many biochemical and chemical reactions. The immobilization of enzymes on carbon nanotubes (CNTs) for generating nano biocatalysts with high stability and reusability is gaining great attention among researchers. Functionalized CNTs act as excellent support for effective enzyme immobilization. Depending on the application, the enzymes can be tailored using the various surface functionalization techniques on the CNTs to extricate the desirable characteristics. Aiming at the preparation of efficient, stable, and recyclable nanobiocatalysts, this review provides an overview of the methods developed to immobilize the various enzymes. Various applications of carbon nanotube-based biocatalysts in water purification, bioremediation, biosensors, and biofuel cells have been comprehensively reviewed.

From Enzyme Stability to Enzymatic Bioelectrode Stabilization Processes

Bioelectrocatalysis using redox enzymes appears as a sustainable way for biosensing, electricity production, or biosynthesis of fine products. Despite advances in the knowledge of parameters that drive the efficiency of enzymatic electrocatalysis, the weak stability of bioelectrodes prevents large scale development of bioelectrocatalysis. In this review, starting from the understanding of the parameters that drive protein instability, we will discuss the main strategies available to improve all enzyme stability, including use of chemicals, protein engineering and immobilization. Considering in a second step the additional requirements for use of redox enzymes, we will evaluate how far these general strategies can be applied to bioelectrocatalysis.

From Microorganism-Based Amperometric Biosensors towards Microbial Fuel Cells

This review focuses on the overview of microbial amperometric biosensors and microbial biofuel cells (MFC) and shows how very similar principles are applied for the design of both types of these bioelectronics-based devices. Most microorganism-based amperometric biosensors show poor specificity, but this drawback can be exploited in the design of microbial biofuel cells because this enables them to consume wider range of chemical fuels. The efficiency of the charge transfer is among the most challenging and critical issues during the development of any kind of biofuel cell. In most cases, particular redox mediators and nanomaterials are applied for the facilitation of charge transfer from applied biomaterials towards biofuel cell electrodes. Some improvements in charge transfer efficiency can be achieved by the application of conducting polymers (CPs), which can be used for the immobilization of enzymes and in some particular cases even for the facilitation of charge transfer. In this review, charge transfer pathways and mechanisms, which are suitable for the design of biosensors and in biofuel cells, are discussed. Modification methods of the cell-wall/membrane by conducting polymers in order to enhance charge transfer efficiency of microorganisms, which can be potentially applied in the design of microbial biofuel cells, are outlined. The biocompatibility-related aspects of conducting polymers with microorganisms are summarized.

Charge Transfer and Biocompatibility Aspects in Conducting Polymer-Based Enzymatic Biosensors and Biofuel Cells

Charge transfer (CT) is a very important issue in the design of biosensors and biofuel cells. Some nanomaterials can be applied to facilitate the CT in these bioelectronics-based devices. In this review, we overview some CT mechanisms and/or pathways that are the most frequently established between redox enzymes and electrodes. Facilitation of indirect CT by the application of some nanomaterials is frequently applied in electrochemical enzymatic biosensors and biofuel cells. More sophisticated and still rather rarely observed is direct charge transfer (DCT), which is often addressed as direct electron transfer (DET), therefore, DCT/DET is also targeted and discussed in this review. The application of conducting polymers (CPs) for the immobilization of enzymes and facilitation of charge transfer during the design of biosensors and biofuel cells are overviewed. Significant attention is paid to various ways of synthesis and application of conducting polymers such as polyaniline, polypyrrole, polythiophene poly(3,4-ethylenedioxythiophene). Some DCT/DET mechanisms in CP-based sensors and biosensors are discussed, taking into account that not only charge transfer via electrons, but also charge transfer via holes can play a crucial role in the design of bioelectronics-based devices. Biocompatibility aspects of CPs, which provides important advantages essential for implantable bioelectronics, are discussed.

Overview of Recent Advances in Immobilisation Techniques for Phenol Oxidases in Solution

Over the past two decades, phenol oxidases, particularly laccases and tyrosinases, have been extensively used for the removal of numerous pollutants in wastewaters due to their broad substrate specificity and their ability to use readily accessible molecular oxygen as the essential cofactor. As for other enzymes, immobilisation of laccases and tyrosinases has been shown to improve the performance and efficiency of the biocatalysts in solution. Several reviews have addressed the enzyme immobilisation techniques and the application of phenol oxidases to decontaminate wastewaters. This paper offers an overview of the recent publications, mainly from 2012 onwards, on the various immobilisation techniques applied to laccases and tyrosinases to induce and/or increase the performance of the biocatalysts. In this paper, the emphasis is on the efficiencies achieved, in terms of structural modifications, stability and resistance to extreme conditions (pH, temperature, inhibitors, etc.), reactivity, reusability, and broad substrate specificity, particularly for application in bioremediation processes. The advantages and disadvantages of several enzyme immobilisation techniques are also discussed. The relevance and effectiveness of the immobilisation techniques with respect to wastewater decontamination are critically assessed. A perspective on the future directions for large-scale application of the phenol oxidases in immobilised forms is provided.

Degradation of several polycyclic aromatic hydrocarbons by laccase in reverse micelle system

Remediation of polycyclic aromatic hydrocarbons (PAHs) in oily sludge has become the focus of attention. UV spectrophotometer analysis showed that four types of PAHs were found in sample, which including phenanthrene, anthracene, benzo(a)anthracene and benzo(b)fluoranthene. In order to degrade PAH effectively, the laccase reverse micelles system was proposed. The system protects laccase from being affected by organic phase. Reverse micelles were prepared by using isooctane to simulate oil. The optimum water content W₀ was 10 by measuring the electrical conductivity of the system. Under this condition, the effects of pH, temperature and ionic strength on the degradation rate of PAHs were investigated. Also, compared with that of non-immobilized laccase, the ratio between the secondary structures of laccase under different conditions was studied. The results showed that the highest laccase activity was obtained at pH 4.2 and 30 °C with 60 mmol/L KCl. Meanwhile, the structure of α-helix accounts for the largest proportion, and the ratio of α-helix in the laccase secondary structure in the laccase-reverse micelle system was higher than that of the non-immobilized one under this condition. Finally, predicting the reactive site of the degradation of polycyclic aromatic hydrocarbons was simulated by ORCA (Version 4.2.0). The application in oily sludge was further conducted. This study provides an effective method and basis for the degradation of PAHs in oily sludge.

Improved stability of multicopper oxidase–carbon nanotube conjugates using a thermophilic laccase

A CNT electrode modified with a thermophilic laccase improved the shelf life and functional stability of the enzyme–CNT composite.