3D electrochemical sensor based on poly(hydroquinone)/gold nanoparticles/nickel foam for dopamine sensitive detection

Simple enzyme based fluorimetric biosensor for urea in human biofluids

As an important biomarker for renal related diseases, detection of urea is playing a vital role in human biofluids on clinical diagnosis concern. In this work, a synthetic salicyaldehyde based imine fluorophore was synthesized using sonication method and conjugated with urease which was used as fluorescent biosensor for the detection of urea in serum samples. This enzyme based biosensor has shown a good selectivity and sensitivity towards urea with the linear range from 2 to 80 mM and the detection limit of 73 µM. The sensing response obtain is highly agreeing with existing analytical technique for urea detection which strongly recommends this biosensor for clinical application.

Fabrication of NiFeB flexible electrode via electroless deposition towards selective and sensitive detection of dopamine

The abstract should be a single paragraph that summarises the content of the article A novel cost effective and eco-friendly flexible electrochemical sensor was designed to deal with the problems...

Determination of dopamine based on its enhancement of gold-silver nanocluster fluorescence

Dopamine (DA) is one of the most important neurotransmitters in human bodies and its sensitive detection remains a challenge. Herein, protein stabilized gold-silver nanoclusters (Au-AgNCs) were synthesized at first. It was found that the introduction of dopamine lead to a significant enhancement of the fluorescence from the nanoclusters, together with a red-shift of the peak. Through related spectroscopic and electrochemical studies, the fluorescence enhancement was attributed to the reduction of the nanoclusters by dopamine. This enhancement was then adopted for quantitative measurements, and linear responses toward dopamine in the ranges 0.01-1.7 μM and 1.7-10 μM were constructed. A limit of detection was obtained at 6.9 nM. The present study provided a facile and efficient method for the determination of dopamine, and the method was successfully applied for related measurements in serum samples.

Electrochemical Sensors Based on Conducting Polymers for the Aqueous Detection of Biologically Relevant Molecules

Electrochemical sensors appear as low-cost, rapid, easy to use, and in situ devices for determination of diverse analytes in a liquid solution. In that context, conducting polymers are much-explored sensor building materials because of their semiconductivity, structural versatility, multiple synthetic pathways, and stability in environmental conditions. In this state-of-the-art review, synthetic processes, morphological characterization, and nanostructure formation are analyzed for relevant literature about electrochemical sensors based on conducting polymers for the determination of molecules that (i) have a fundamental role in the human body function regulation, and (ii) are considered as water emergent pollutants. Special focus is put on the different types of micro- and nanostructures generated for the polymer itself or the combination with different materials in a composite, and how the rough morphology of the conducting polymers based electrochemical sensors affect their limit of detection. Polypyrroles, polyanilines, and polythiophenes appear as the most recurrent conducting polymers for the construction of electrochemical sensors. These conducting polymers are usually built starting from bifunctional precursor monomers resulting in linear and branched polymer structures; however, opportunities for sensitivity enhancement in electrochemical sensors have been recently reported by using conjugated microporous polymers synthesized from multifunctional monomers.

New insight for simultaneous determination of hazardous di-hydroxybenzene isomers at crown ether modified polymer/carbon nanotubes composite sensor

A new insight is presented in the fabrication of a reliable electrochemical sensor for di-hydroxybenzene isomers; hydroquinone (HQ), catechol (CC), and resorcinol (RC) which have been considered as common pollutants in environment and water samples. The sensor is based on modifying the glassy carbon electrode (GC) with successive layers, multi-walled carbon nanotubes (CNT), poly-hydroquinone (PHQ) and benzo-12-crown-4 (CE); GC/CNT/PHQ/CE. CE is introduced for the first time as a receptor for the di-hydroxybenzene isomers based on host-guest size matching. Other cycling compound with different cavity diameter as β-cyclodextrin (β-CD) (6.0-6.5 Å) was examined displaying lower current responses. CE exhibited "fit" cavity size (1.20-1.50 Å). Thus, the inclusion complexes formed between β-CD and di-hydroxybenzene isomers are less stable. The layered sensor showed highly electro-catalytic activity for simultaneous determination of isomers; HQ, CC and RC in the concentration ranges of 0.03-100 μM, 0.01-100 μM and 0.05-100 μM with low detection limit values of 0.156 nM, 0.118 nM and 0.427 nM, respectively. The practical impact of the sensor was illustrated for determination of di-hydroxybenzene isomers in real water matrices from two different sources. Moreover, anti-interference ability of the layered sensor for determination of di-hydroxybenzene isomers was successfully achieved in presence of common interfering ions and organic pollutants.

A novel electrochemical sensing platform for detection of dopamine based on gold nanobipyramid/multi-walled carbon nanotube hybrids

Dopamine homeostasis is an important clinical diagnostic index, because an abnormal level in the human body is closely related to certain serious diseases. Herein, a novel electrochemical sensing platform based on gold nanobipyramid/multi-walled carbon nanotube hybrids (AuNBP/MWCNTs) is developed to detect dopamine in human fluids. Using field emission scanning electron microscopy, it is observed that AuNBPs of about 60 nm with two pyramids are well dispersed on the surface of MWCNTs. Energy-dispersive X-ray spectrometry, X-ray diffraction and X-ray photoelectron spectroscopy confirm that AuNBPs are self-assembled onto the surface of MWCNTs to form the hybrids. Cyclic voltammetry reveals that the AuNBP/MWCNTs exhibit good electrocatalytic activity toward dopamine oxidation owing to the synergistic effects of AuNBPs and MWCNTs. In addition, both cyclic voltammetry and differential pulse voltammetry display three well-resolved and distinct oxidation peaks on the AuNBP/MWCNT-modified glassy carbon electrode. Based on AuNBP/MWCNTs, the newly developed electrochemical sensor is used to detect dopamine in the presence of ascorbic acid and uric acid over a wide linear range from 50 nM to 2.7 mM and a low detection limit of 15 nM (at S/N = 3). The electrochemical sensor can also be applied for the quantitative analysis of dopamine in real samples. Graphical abstract A novel electrochemical sensing platform based on gold nanobipyramid/multi-walled carbon nanotube hybrids (AuNBP/MWCNTs) was proposed to detect dopamine in the presence of ascorbic acid and uric acid.

Recent Advances in Electrochemical and Optical Sensing of Dopamine

Nowadays, several neurological disorders and neurocrine tumours are associated with dopamine (DA) concentrations in various biological fluids. Highly accurate and ultrasensitive detection of DA levels in different biological samples in real-time can change and improve the quality of a patient's life in addition to reducing the treatment cost. Therefore, the design and development of diagnostic tool for in vivo and in vitro monitoring of DA is of considerable clinical and pharmacological importance. In recent decades, a large number of techniques have been established for DA detection, including chromatography coupled to mass spectrometry, spectroscopic approaches, and electrochemical (EC) methods. These methods are effective, but most of them still have some drawbacks such as consuming time, effort, and money. Added to that, sometimes they need complex procedures to obtain good sensitivity and suffer from low selectivity due to interference from other biological species such as uric acid (UA) and ascorbic acid (AA). Advanced materials can offer remarkable opportunities to overcome drawbacks in conventional DA sensors. This review aims to explain challenges related to DA detection using different techniques, and to summarize and highlight recent advancements in materials used and approaches applied for several sensor surface modification for the monitoring of DA. Also, it focuses on the analytical features of the EC and optical-based sensing techniques available.

Combining High Porosity with High Surface Area in Flexible Interconnected Nanowire Meshes for Hydrogen Generation and Beyond

Nanostructured metals with large surface area have a great potential for multiple device applications. Although various metal architectures based on metal nanoligaments and nanowires are well known, they typically show a tradeoff between mechanical robustness, high surface area, and high (macro)porosity, which, when combined, could significantly improve the performance of devices such as batteries, electrolyzers, or sensors. In this work, we rationally designed templated networks of interconnected metal nanowires, combining for the first time high porosity of metal foams, narrowly distributed macropores, and a very high surface area of nanoporous dealloyed metals. Thanks to their structural uniformity, the few-micron thick nanowire meshes are also remarkably flexible and durable. We show how the textural properties of the material can be precisely tuned to optimize the nanowire networks for applications in different devices. In an exemplary application in electrolytic production of hydrogen, thanks to its high surface area, a few-micron thick nanomesh outperformed a 300 times thicker nickel foam. Furthermore, thanks to its high porosity, the Pt-doped nanomesh surpassed a microporous Pt/C cloth, demonstrating benefits of the optimally designed nanowire structure for a simultaneous improvement and miniaturization of electrochemical devices. This work extends the potential of interconnected nanowires to multiple new research and industrial applications requiring highly porous and flexible conductive materials with a high surface-to-volume ratio.

Recent Advances in the Detection of Neurotransmitters

Neurotransmitters are chemicals that act as messengers in the synaptic transmission process. They are essential for human health and any imbalance in their activities can cause serious mental disorders such as Parkinson’s disease, schizophrenia, and Alzheimer’s disease. Hence, monitoring the concentrations of various neurotransmitters is of great importance in studying and diagnosing such mental illnesses. Recently, many researchers have explored the use of unique materials for developing biosensors for both in vivo and ex vivo neurotransmitter detection. A combination of nanomaterials, polymers, and biomolecules were incorporated to implement such sensor devices. For in vivo detection, electrochemical sensing has been commonly applied, with fast-scan cyclic voltammetry being the most promising technique to date, due to the advantages such as easy miniaturization, simple device architecture, and high sensitivity. However, the main challenges for in vivo electrochemical neurotransmitter sensors are limited target selectivity, large background signal and noise, and device fouling and degradation over time. Therefore, achieving simultaneous detection of multiple neurotransmitters in real time with long-term stability remains the focus of research. The purpose of this review paper is to summarize the recently developed sensing techniques with the focus on neurotransmitters as the target analyte, and to discuss the outlook of simultaneous detection of multiple neurotransmitter species. This paper is organized as follows: firstly, the common materials used for developing neurotransmitter sensors are discussed. Secondly, several sensor surface modification approaches to enhance sensing performance are reviewed. Finally, we discuss recent developments in the simultaneous detection capability of multiple neurotransmitters.