Facile fabrication of reduced graphene oxide and Keggin-type polyoxometalates nanocomposite film for high performance electrocatalytic oxidation of nitrite

MIL-101(Cr) molecular cage anchored on 2D Ti3C2TX MXene nanosheets as high-performance electrochemical sensing platform for detection of xanthine

A new electrochemical sensing material based on the MIL-101(Cr) molecular cage anchored on 2D Ti₃C₂T_X-MXene nanosheets was prepared by using the in situ growth molecular engineering strategy. The sensing material was characterized by using different methods such as SEM, XRD, and XPS. The electrochemical sensing performance of MIL-101(Cr)/Ti₃C₂T_x-MXene was studied by DPV, CV, EIS, and other techniques. The electrochemical tests showed that the linear range of the modified electrode for xanthine (XA) detection was 1.5-73.0 μM and 73.0-133.0 μM, the detection limit was 0.45 μM (working potential of + 0.71 V vs. Ag/AgCl), and the performance is superior compared with the reported enzyme-free modified electrodes for detecting XA. The fabricated sensor has high selectivity and stability. It has good practicability in serum analysis with recoveries of 96.58-103.27% and a relative standard deviation (RSD) of 3.58-4.32%.

Electrochemical, Ultrasensitive, and Selective Detection of Nitrite and H2O2: Novel Macrostructured Phthalocyanine with Composite MWCNTs on a Modified GCE

In the current study, the synthesis of tetra-4-(2-methoxyphenoxy) carboxamide cobalt(II) amide-bridged phthalocyanine (CoTMePhCAPc) is described, as well as its characterization by Fourier transform infrared (FT-IR), UV-visible, and mass spectroscopy; powder X-ray diffraction (PXRD); thermogravimetric analysis (TGA); scanning electron microscopy (SEM); and electrochemistry. Sensing of nitrite (NO₂^-) and hydrogen peroxide (H₂O₂) simultaneously was done on CoTMePhCAPc with the composite multiwalled carbon nanotube (MWCNT)-modified glassy carbon electrode (CoTMePhCAPc/MWCNT/GCE) in the range of linear absorption (NO₂^- and H₂O₂: CV 50-750, differential pulse voltammetry (DPV) 50-750, CA 50-500 nmol L^-1), lower detection limit (NO₂^- and H₂O₂: CV 10.5 and 12.5, DPV 10.5 and 11.2, CA 6.0 and 5.5 nmol L^-1), and sensitivity (NO₂^- and H₂O₂: CV 0.379 and 0.529, DPV 0.043 and 0.049, CA 0.033 and 0.040 μA nM^-1 cm^-2). The composite electrode exhibits improved electrocatalytic behavior compared to modified electrodes for nitrite and H₂O₂. The CoTMePhCAPc/MWCNT/GCE sensor displays good selectivity even in the presence of an excess of interfering metal ions and biomolecules at the applied potentials of +400 mV (nitrite) and -400 mV (H₂O₂). Moreover, the fabricated sensor was studied with various phosphate-buffered saline (PBS) (pH 5-9) electrolyte solutions. The unknown H₂O₂ concentration in blood samples and apple juice and nitrite concentration in drinking water and butter leaf lettuce were all measured using the usual addition method. Docking analysis clearly indicates that the ligand shows excellent inhibition activity toward the three subjected protein molecules.

Facile Controlled Synthesis of Pd-ZnO Nanostructures for Nitrite Detection

The electrocatalytic characteristics of nanostructures are significantly affected by surface structure. The strict regulation of structural characteristics is highly beneficial for the creation of novel nanocatalysts with enhanced electrocatalytic performance. This work reports a nitrite electrochemical sensor based on novel flower-like Pd-ZnO nanostructures. The Pd-ZnO nanocatalysts were synthesized through a simple hydrothermal method, and their morphology and structure were characterized via field-emission scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD). Their electrocatalytical performance in the nitrite oxidation reaction was studied via cyclic voltammetry (CV) and the amperometric technique. Compared to pure ZnO and Pd nanoparticles, the Pd-ZnO nanostructures exhibited enhanced electrochemical performance in the nitrite oxidation reaction. In order to investigate the relationships between the structures of Pd-ZnO nanocatalysts and the corresponding electrocatalytic performances, different surface morphologies of Pd-ZnO nanocatalysts were fabricated by altering the solution pH. It was found that the flower-like Pd-ZnO nanostructures possessed larger effective surface areas and faster electron transfer rates, resulting in the highest electrocatalytic performance in the nitrite oxidation reaction. The designed nitrite sensor based on flower-like Pd-ZnO displayed a wide concentration linear range of 1 μM-2350 μM, a low detection limit of 0.2 μM (S/N of 3), and high sensitivity of 151.9 μA mM^-1 cm^-2. Furthermore, the proposed sensor exhibited perfect selectivity, excellent reproducibility, and long-time stability, as well as good performance in real sample detection.

Application of Composite Film Containing Polyoxometalate Ni25 and Reduced Graphene Oxide for Photoelectrocatalytic Water Oxidation

The preparation of clean energy is an effective way to solve the global energy crisis and reduce environmental pollution. The decomposition of water can produce hydrogen and oxygen, which is one of the effective ways to prepare clean energy. However, water oxidation is a bottleneck for water decomposition, thus, developing a water oxidation catalyst can accelerate the process of water decomposition to generate clean energy. Nickel-substituted polyoxometalate [Ni25(H2O)2(OH)18(CO3)2(PO4)6(SiW9O34)6]50− (Ni25) is proven as an excellent water oxidation photocatalyst. To develop the effective photoelectrocatalyst for water oxidation, in this work, we constructed two composite films containing Ni25 on ITO, [PDDA/Ni25]n, and PDDA/[Ni25/(PDDA–rGO)]n, by layer-by-layer self-assembly, which is the first combination of nickel-substituted polyoxometalates and reduced graphene oxide (rGO). The study on the photoelectrocatalytic performance of the two films indicates that the water oxidation current of the film PDDA/[Ni25/(PDDA–rGO)]n-modified electrode is increased by 33.7% after light irradiation, which is 1.71 times that of the film [PDDA/Ni25]n-modified electrode. Moreover, the transient photocurrent response of the film PDDA/[Ni25/(PDDA–rGO)]n-modified electrode demonstrates that there is a synergistic effect between rGO and Ni25, and rGO-accelerated electron transport and inhibited charge recombination. In addition, the film PDDA/[Ni25/(PDDA–rGO)]n-modified electrode exhibits good stability, indicating its great potential as an effective photoelectrocatalyst for water oxidation in practical application.

Defected MoS2 Modified by Vanadium-Substituted Keggin-Type Polyoxometalates as Electrocatalysts for Triiodide Reduction in Dye-Sensitized Solar Cells

The rational design of efficient triiodide reduction reaction catalysts that are dependent on cheap and ample elements on Earth has become a challenge. As an extremely encouraging non-noble metallic catalyst, MoS₂ requires effective strategies to improve the site accessibility, inherent conductivity, and structural stability. Here, vanadium-substituted Keggin-type polyoxometalates (POMs) can be used as electron aggregates to modify manganese (Mn)-doped MoS₂ through the electrochemical deposition strategy, thereby improving the charge transfer ability of MoS₂ to I^-/I₃^- redox pairs and accelerating the reduction of I₃^-. Additionally, with the increase in the number of vanadium atoms substituted in POMs, the conduction band of POMs and MoS₂ can also match better, which effectively reduces the energy loss and is more conducive to charge transfer. Meanwhile, the deposition of POMs can improve the stability of metastable MoS₂. When POMs/MoS₂ materials are used as the counter electrodes of dye-sensitized solar cells, the power conversion efficiency (PCE) obtained is 7.27%, which is higher than that of platinum (Pt) (6.07%). The PCE can still maintain the initial 96% after 9 days. This work provides a valuable way for the improvement of platinum-free catalysts with minimal expense, basic process, high efficiency, and good stability.

Electrocatalytic performance of tyrosinase detection in Penaeus vannamei based on a [(PSS/PPy)(P2Mo18/PPy)5] multilayer composite film modified electrode

Polyoxometalates (POMs) are widely used in the preparation of sensors that detect the content of substances because of their excellent electron transfer capabilities. In this paper, a [(PSS/PPy)(P₂Mo₁₈/PPy)₅] multilayer composite film modified electrode was prepared by the potentiostatic deposition method. The electrochemical performance of the modified electrode was studied by cyclic voltammetry under the conditions of different modified layers, different supporting electrolytes and different sweep rates. Different concentrations of tyrosinase were catalyzed by the modified electrode under a suitable supporting electrolyte, and the electrochemical sensing of tyrosinase by the modified electrode was studied. The research results show that the modified electrode has good stability and reproducibility for electrochemical sensing of tyrosinase, and the response current has a good linear relationship with the amount of tyrosinase added. Taking peak III as an example, the detection limit (S/N = 3) was 2.7649 U mL^-1. It can be known from the timing ampere curve that as the concentration of tyrosinase in the reaction system continues to increase, its response current increases stepwise, providing a linear curve in the range of 3.66 U mL^-1 to 26.87 U mL^-1, and the minimum detection limit (S/N = 3) reaches 0.0021 U mL^-1. The [(PSS/PPy)(P₂Mo₁₈/PPy)₅] multilayer composite membrane modified electrode was used to detect tyrosinase in Penaeus vannamei. The spiked recovery of the sample was 96.3-100.8%, indicating that the modified electrode has high accuracy and can be used for the detection of tyrosinase in actual samples.

The construction of a simple sensor for the simultaneous detection of nitrite and thiosulfate by heme catalysis

Several simple sensors were fabricated through a one-step method. By depositing electro-active compounds, such as β-cyclodextrins (β-CD), heme, dopamine (DA), or Fc-ECG, onto a screen-printed electrode (SPE), the successful simultaneous detection of nitrite (NO2 -) and thiosulfate (S2O3 2-) ions was observed. Under optimal operating conditions, the notable electrocatalytic abilities of a Heme/SPE sensor were detected for the oxidation of NO2 - and S2O3 2-, with remarkable peak potential differences, after characterization via SEM, CV, and DPV. Linear relationships were obtained in the ranges of 5.0-200.0 μmol L-1 and 1.0-100.0 μmol L-1 for the current response versus concentration of NO2 - and S2O3 2-, respectively. The limits of detection were determined to be 1.67 and 0.33 μmol L-1 while the sensitivities of detection were noted to be 0.43 and 1.43 μA μM-1 cm-2, respectively. During the detection of NO2 - and S2O3 2-, no interfering common ions were observed. Furthermore, average recoveries from 96.0 to 104.3% and a total R.S.D. of less than 3.1% were found for the detection of NO2 - and S2O3 2- in pickled juice and tap water using the simple sensor. These results showed that rapid and precise measurements for actual application in NO2 - and S2O3 2- detection could be conducted in food samples, indicating a potential use in food safety.

The comparative study of two reusable phosphotungstic acid salts/reduced graphene oxides composites with enhanced photocatalytic activity

In this work, two recyclable phosphotungstic acid salts/reduced graphene oxides were successfully prepared. The prepared samples were characterized by X-ray diffraction analysis (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), infrared spectroscopy (IR), X-ray photoelectron spectroscopy (XPS), thermo-gravimetric analysis (TGA), Raman spectroscopy, and photoluminescence spectroscopy (PL). The structure and catalytic performance of two composites were comparatively investigated, and the reduced graphene oxide mass ratios in K₃[PW₁₂O₄₀]/reduced graphene oxide (denoted as KPW-RGO) and (NH₄)₃[PW₁₂O₄₀]/reduced graphene oxide (denoted as NH₄PW-RGO) were optimized and their roles in them were explored. The results indicate that the Keggin structures of KPW and NH₄PW are still kept after being anchored on the RGO surface, but their morphologies change a lot in composites. The photocatalytic activities of KPW-3RGO (0.01989 min^-1) are 5.42 times than that of KPW (0.00367 min^-1), and NH₄PW-1RGO (0.0184 min^-1) is 2.26 times than that of NH₄PW (0.00814 min^-1). The enhanced photocatalytic activity is mainly ascribed to photo-induced interfacial charge transfer on the heterojunction between RGO and NH₄PW or KPW and strong adsorption ability of RGO towards MO. Moreover, NH₄PW-1RGO and KPW-3RGO had much better photocatalytic activity, good recyclable ability, and stability compared to HPW-RGO, which cannot be recycled.

Highly sensitive nitrite sensor based on AuNPs/RGO nanocomposites modified graphene electrochemical transistors

Detection of nitrite is important for environmental safety and human health, and the development of high-performance sensors for accurate detection of nitrite is highly desirable. Herein, a highly sensitive graphene electrochemical transistor (GECT) nitrite sensor was designed and fabricated for the first time. A single layer of graphene was placed between the source and drain electrodes by the wetting transfer method to act as channel for the transistor. Au nanoparticles modified reduced graphene oxide nanocomposites (AuNPs/RGO) were electrodeposited at the transistor gate to improve its catalytic oxidation performance of nitrite with optimized electrodeposition conditions. The sensing principle was attributed to changes in effective gate voltage applied to GECT induced by electrooxidation of nitrite at gate electrodes. Due to the high carrier mobility of graphene in the channel and the excellent electrocatalytical activity of AuNPs/RGO on the gate, the obtained sensor device exhibited an exceedingly low detection limit (0.1 nM nitrite) and ultra-wide linear range from 0.1 nM to 7 μM and from 7 to 1000 μM, which are comparable or superior to the performance of large-scale instruments (e.g. chromatography, spectrophotometry, and spectrofluorimetry etc.). The GECT device also showed good anti-interference performance toward common interfering ions and stable performances. Nitrite in natural lake water has been proven to be monitored by our devices. Therefore, the present novel GECT sensor could act as a desirable practical platform for highly sensitive detection of nitrite in the food and environmental fields.

A Facile Electrochemical Sensor Labeled by Ferrocenoyl Cysteine Conjugate for the Detection of Nitrite in Pickle Juice

Simple and facile electrochemical sensors for nitrite detection were fabricated by directly depositing ferrocenoyl cysteine conjugates Fc[CO-Cys(Trt)-OMe]₂ [Fc(Cys)₂] or Fc[CO-Glu-Cys-Gly-OH] [Fc-ECG] on screen-printed electrodes (SPEs). The modified carbon electrodes were characterized by scanning electron microscopy (SEM), cyclic voltammetry (CV) and differential pulse voltammetry (DPV). Results indicated that Fc-ECG/SPE sensor showed enhanced current response and a lower overpotential than Fc(Cys)₂/SPE sensor for nitrite detection. Optimal operating conditions were estimated for nitrite detection by DPV. The concentration of nitrite showed a good linear relationship with the current response in the range of 1.0–50 μmol·L⁻¹ and with 0.3 μmol·L⁻¹ as the concentration for limit of detection. There were no interferences from most common ions. The development of this electrochemical sensor was used for nitrite detection in pickled juice with a R.S.D. lower than 2.1% and average recovery lower than 101.5%, which indicated that disposable electrochemical sensor system can be applied for rapid and precise nitrite detection in foods.

Preparation, characterization and electrocatalysis performance of a trimeric ruthenium-substituted isopolytungstate

The ruthenium-containing isopolytungstate Rb₁₀K₃H₆[SeO₃(H₉Ru_5.5W_30.5O₁₁₄)]Cl₃·48H₂O was isolated and then served as a catalyst, showing electrochemical catalytic activity towards the oxidation reaction of nitrite.

A novel polyoxometalate-based metal–organic nanotube framework templated by twin-Dawson clusters: synthesis, structure and bifunctional electrocatalytic properties

A novel polyoxometalate-based metal–organic nanotube framework templated by twin-Dawson clusters was synthesized, which exhibits high-performance bifunctional electrocatalytic activities toward reduction of bromate and oxidation of ascorbic acid.

Ordered SiO2 cavity promoted formation of gold single crystal nanoparticles towards an efficient electrocatalytic application

A [111] facet dominated gold single crystal electrode with improved electrocatalytic ability for the oxidation of ethanol and nitrite.