Combustion synthesis of bifunctional LaMO3 (M = Cr, Mn, Fe, Co, Ni) perovskites for oxygen reduction and oxygen evolution reaction in alkaline media

Perspectives of La0.9Sr0.1Fe0.9Co0.1O3±δ perovskite obtained by Pechini and sonochemical methods: a case study

The sonochemical method is a novel synthesis route that takes advantage of the use of ultrasonic radiation to obtain different nanomaterials with an improvement in the process variables and material characteristics. In this work, two different synthesis routes to obtain a double perovskite structure were compared in detail. The Pechini synthesis method is a widely used and effective way to obtain this kind of structure by the formation of a cross-linked network of metal cations. Alternatively, in sonochemistry, chemical reactions occur with the application of powerful ultrasound radiation. The final characteristics of synthesized powders of La0.9Sr0.1Fe0.9Co0.1O3± δ (LSFC) were analysed thermally, structurally, morphologically and optically, and their transport properties were evaluated to determine their semiconductor character in a solid oxide fuel cell device and in photocatalytic processes. Structural results indicated a well crystallized perovskite structure with a single cubic phase. The cell parameter a (approx. 3.89 Å) and crystal size measurements (11-20 nm) were determined by Rietveld refinement for samples obtained by both synthesis methods. Thescanning electron microscope micrographs showed aggregates with homogeneous morphology and a uniform particle size distribution, with a rough and porous surface. Optical properties were determined by ultraviolet-visible spectrophotometry and photoluminescence, resulting in an E g of 1.2 and 0.8 eV in samples from Pechini and sonochemistry, respectively.

Structural evolution and catalytic mechanisms of perovskite oxides in electrocatalysis

Electrocatalysis plays a pivotal role in driving the progress of modern technologies and industrial processes such as energy conversion and emission reduction. Perovskite oxides, an important family of electrocatalysts, have garnered substantial attention in diverse catalytic reactions because of their highly tunable composition and structure, as well as their considerable activity and stability. This review delves into the mechanisms of electrocatalytic reactions that use perovskite oxides as electrocatalysts, while also providing a comprehensive summary of the potential key factors that influence catalytic activity across various reactions. Furthermore, this review offers an overview of advanced characterizations used for studying catalytic mechanisms and proposes approaches to designing highly efficient perovskite oxide electrocatalysts.

Designing bifunctional perovskite catalysts for the oxygen reduction and evolution reactions

The development of unified regenerative fuel cells (URFCs) necessitates an active and stable bifunctional oxygen electrocatalyst. The unique challenge of possessing high activity for both the oxygen reduction (ORR) and oxygen evolution (OER) reactions, while maintaining stability over a wide potential window impedes the design of bifunctional oxygen electrocatalysts. Herein, two design strategies are explored to optimize their performance. The first incorporates active sites for the ORR and OER, Mn and Co, into a single perovskite structure, which is achieved with the perovskites Ba0.5Sr0.5Co0.8Mn0.2O3-δ (BSCM) and La0.5Ba0.25Sr0.25Co0.5Mn0.5O3-δ (LBSCM). The second combines an active ORR perovskite catalyst (La0.4Sr0.6MnO3-δ (LSM)) with an OER active perovskite catalyst (Ba0.5Sr0.5Co0.8Fe0.2O3-δ (BSCF)) in a physical mixed composite (BSCF/LSM). The success of the two strategies is investigated by measuring the catalysts' catalytic performance and response to alternating reducing and oxidizing potentials to mimic the dynamic conditions experienced during the operation of URFCs. Additionally, the continuous, potentiodynamic change in Mn, Co, and Fe oxidation states during the ORR and OER is elucidated with operando X-ray absorption spectroscopy (XAS) measurements, revealing key insights into the nature of the active sites. The results reveal important catalyst physiochemical properties and provide a guide for future research and design principles for bifunctional oxygen electrocatalysts.

LaCo0.2Fe0.8O3 perovskites doped with natural Ca2+ as bifunctional electrocatalysts for oxygen evolution and reduction reactions

Perovskite oxides are promising electrocatalysts for various energy applications due to their exceptional catalytic activity, flexible architecture, and low cost. In this study, LCFO was doped with different ratios of Ca2+ from eggshells, resulting in dual-purpose electrocatalysts for oxygen reduction and evolution processes. The nanoparticles were characterized using various techniques, including Brunauer-Emmett-Teller analysis and XRD. Results clarified the relative surface area and roughness, increasing with Ca2+ doping. LCFO also demonstrated highly magnetic properties, improved charge transfer, catalytic activity, and long-term durability. The results demonstrated the perovskite's cost-effectiveness as a bifunctional electrocatalyst, and the role of Ca2+ in enhancing its properties. La0.6Ca0.4Co0.2Fe0.8O3(LCCFO-0.4) showed higher magnetic properties (M s = 13.36 emu g-1 and M r = 2.54 emu g-1). The LCFO sample showed a current density of 5.13 mA cm-2 and 3 mA cm-2 for OER and ORR respectively, at E onset 1.7 V and 0.57 V (vs. RHE). The LCFO electrochemical active surface area is 0.033 cm2.

Development of In Situ Methods for Preparing La-Mn-Co-Based Compounds over Carbon Xerogel for Oxygen Reduction Reaction in an Alkaline Medium

Metal oxides containing La, Mn, and Co cations can catalyze oxygen reduction reactions (ORRs) in electrochemical processes. However, these materials require carbon support and optimal interactions between both compounds to be active. In this work, two approaches to prepare composites of La-Mn-Co-based compounds over carbon xerogel were developed. Using sol-gel methods, either the metal-based material was deposited on the existing carbon xerogel or vice versa. The metal oxide selected was the LaMn0.7Co0.3O3 perovskite, which has good catalytic behavior and selectivity towards direct ORRs. All the as-prepared composites were tested for ORRs in alkaline liquid electrolytes and characterized by diverse physicochemical techniques such as XRD, XPS, SEM, or N2 adsorption. Although the perovskite structure either decomposed or failed to form using those in situ methods, the materials exhibited great catalytic activity, which can be ascribed to the strengthening of the interactions between oxides and the carbon support via C-O-M covalent bonds and to the formation of new active sites such as the MnO/Co heterointerfaces. Moreover, Co-Nx-C species are formed during the synthesis of the metal compounds over the carbon xerogel. These species possess a strong catalytic activity towards ORR. Therefore, the composites formed by synthesizing metal compounds over the carbon xerogel exhibit the best performance in the ORR, which can be ascribed to the presence of the MnO/Co heterointerfaces and Co-Nx-C species and the strong interactions between both compounds. Moreover, the small nanoparticle size leads to a higher number of active sites available for the reaction.

Tailoring of structural, morphological, electrical, and magnetic properties of LaMn1-x Fe x O3 ceramics

This study undertakes a comparative analysis of the structural, morphological, electrical, and magnetic characteristics of Fe-doped LaMnO3 ceramics. The solid-state reaction method was used to prepare Fe-doped LaMnO3 at different concentrations (0.00 ≤ x ≤ 1.00) and has been characterized using X-ray diffraction (XRD), Fourier transforms infrared spectroscopy (FTIR), Field emission scanning electron microscopy (FE-SEM), energy-dispersive spectroscopy (EDS), and vibrating sample magnetometry (VSM). The structural transformation from rhombohedral to orthorhombic with Fe-doping is demonstrated by Rietveld's refined XRD patterns. The positive slope in Williamsons-Hall's (W-H) plots confirms the presence of tensile strain with increasing average crystallite size. Quasi-spherical morphology of all the compositions with similar uniformity was confirmed by FESEM images. The chemical distribution of all the elements has been identified by EDS mapping images. Normal dielectric dispersion behaviour of all the samples with NTCR response is confirmed by dielectric and impedance analysis respectively. Increasing lattice volume with Fe-concentration results is increasing E a. The presence of antiferromagnetic ordering, in addition to weak ferromagnetic ordering, is indicated by the unsaturated magnetization even up to a high external field. The decrease in M S and increase in H C values due to Fe-doping reflect the influence of particle size on various magnetic parameters.

Strategic Design and Insights into Lanthanum and Strontium Perovskite Oxides for Oxygen Reduction and Oxygen Evolution Reactions

Perovskite oxides exhibit bifunctional activity for both oxygen reduction (ORR) and oxygen evolution reactions (OER), making them prime candidates for energy conversion in applications like fuel cells and metal-air batteries. Their intrinsic catalytic prowess, combined with low-cost, abundance, and diversity, positions them as compelling alternatives to noble metal and metal oxides catalysts. This review encapsulates the nuances of perovskite oxide structures and synthesis techniques, providing insight into pivotal active sites that underscore their bifunctional behavior. The focus centers on the breakthroughs surrounding lanthanum (La) and strontium (Sr)-based perovskite oxides, specifically their roles in zinc-air batteries (ZABs). An introduction to the mechanisms of ORR and OER is provided. Moreover, the light is shed on strategies and determinants central to optimizing the bifunctional performance of La and Sr-based perovskite oxides.

A sol-gel derived LaCoO3 perovskite as an electrocatalyst for Al-air batteries

In this work, we report the performance of the LaCoO3 perovskite oxide as a cathode catalyst for an Al-air battery. LaCoO3 was prepared using the sol-gel method and its suitability as a catalyst has been studied. XRD studies of the perovskite revealed a monoclinic symmetry with no secondary phase being observed. An aggregated morphology with a porous structure was observed from SEM analysis. TEM studies showed that the aggregated LaCoO3 particles exhibited an average diameter of 49.94 nm. The surface area obtained using the BET method is found to be 9.088 m2 g-1. The electrochemical activity of LaCoO3 towards the oxygen reduction reaction (ORR) was higher than that of the bare glassy carbon electrode (GCE). From the kinetic studies, the number of electrons transferred was found to be 4.08, indicating that the reaction occurs through a 4e- pathway. The mass activity and specific activity were found to be 3.05 mA mg-1 and 0.33 mA cm-2 at 1.2 V (vs. the reversible hydrogen electrode (RHE)), respectively. The stability of LaCoO3 was studied using chronoamperometry and impedance analyses, which revealed less charge transfer resistance before and after the stability test. Subsequently, an Al-air battery was fabricated using LaCoO3 as the cathode and Al as the anode. Polyvinyl alcohol (PVA) based KOH gel was used as an electrolyte. The cell exhibited an open circuit voltage (OCV) of 1.35 V with a discharging capacity of 1770 mA h g-1. In addition, the power density was calculated to be 10.04 mW cm-2 at 0.6 V vs. RHE. Our studies suggest that LaCoO3 can be a promising candidate as a cathode for high-performance Al-air batteries.

Nanoparticle-based materials in anticancer drug delivery: Current and future prospects

The past decade has witnessed a breakthrough in novel strategies to treat cancer. One of the most common cancer treatment modalities is chemotherapy which involves administering anti-cancer drugs to the body. However, these drugs can lead to undesirable side effects on healthy cells. To overcome this challenge and improve cancer cell targeting, many novel nanocarriers have been developed to deliver drugs directly to the cancerous cells and minimize effects on the healthy tissues. The majority of the research studies conclude that using drugs encapsulated in nanocarriers is a much safer and more effective alternative than delivering the drug alone in its free form. This review provides a summary of the types of nanocarriers mainly studied for cancer drug delivery, namely: liposomes, polymeric micelles, dendrimers, magnetic nanoparticles, mesoporous nanoparticles, gold nanoparticles, carbon nanotubes and quantum dots. In this review, the synthesis, applications, advantages, disadvantages, and previous studies of these nanomaterials are discussed in detail. Furthermore, the future opportunities and possible challenges of translating these materials into clinical applications are also reported.

Research Progress of Perovskite-Based Bifunctional Oxygen Electrocatalyst in Alkaline Conditions

In light of the depletion of conventional energy sources, it is imperative to conduct research and development on sustainable alternative energy sources. Currently, electrochemical energy storage and conversion technologies such as fuel cells and metal-air batteries rely heavily on precious metal catalysts like Pt/C and IrO2, which hinders their sustainable commercial development. Therefore, researchers have devoted significant attention to non-precious metal-based catalysts that exhibit high efficiency, low cost, and environmental friendliness. Among them, perovskite oxides possess low-cost and abundant reserves, as well as flexible oxidation valence states and a multi-defect surface. Due to their advantageous structural characteristics and easily adjustable physicochemical properties, extensive research has been conducted on perovskite-based oxides. However, these materials also exhibit drawbacks such as poor intrinsic activity, limited specific surface area, and relatively low apparent catalytic activity compared to precious metal catalysts. To address these limitations, current research is focused on enhancing the physicochemical properties of perovskite-based oxides. The catalytic activity and stability of perovskite-based oxides in Oxygen Reduction Reaction/Oxygen Evolution Reaction (ORR/OER) can be enhanced using crystallographic structure tuning, cationic regulation, anionic regulation, and nano-processing. Furthermore, extensive research has been conducted on the composite processing of perovskite oxides with other materials, which has demonstrated enhanced catalytic performance. Based on these different ORR/OER modification strategies, the future challenges of perovskite-based bifunctional oxygen electrocatalysts are discussed alongside their development prospects.

Decoration of Au Nanoparticles over LaFeO3: A High Performance Electrocatalyst for Total Water Splitting

Electrocatalytic water splitting has emerged as a promising approach for clean and sustainable hydrogen production. The LaFeO3 perovskite structure exhibits intriguing properties such as mixed ionic-electronic conductivity, high stability, and abundant active sites for electrocatalysis. However, its OER and HER activities are limited by the sluggish kinetics of these reactions. To overcome this limitation, Au nanoparticles (NPs) are decorated onto the surface of LaFeO3 through a facile synthesis method. The Au NPs on the LaFeO3 surface provide additional active sites for water splitting reactions, promoting the adsorption and activation of water molecules. The presence of Au enhances the charge transfer kinetics via the heterostructure between Au NPs and LaFeO3 and facilitates electron transport during the OER and HER process. The catalyst requires only 318 and 199 mV as overpotential to attain a 50 mA cm-2 current density in 1 M KOH solution. Our results demonstrate that the Au@LaFeO3 catalyst exhibits significantly improved electrocatalytic activity compared to pure LaFeO3 and other catalysts reported in the literature. The enhanced performance is attributed due to the synergistic effects between Au NPs and LaFeO3, including an increased surface area, improved conductivity, and optimized surface energetics. Overall, the Au-decorated LaFeO3 catalyst presents a promising candidate for efficient electrocatalytic water splitting, providing a pathway for sustainable hydrogen production. The insights gained from this study contribute to the development of advanced catalysts for renewable energy technologies and pave the way for future research in the field of electrochemical water splitting.

Enhanced Photocatalytic Water Splitting of SrTiO3 Perovskite through Cobalt Doping: Experimental and Theoretical DFT Understanding

Throughout extensive research endeavors, SrTiO3 has emerged as a promising photocatalytic material for utilizing solar energy and facilitating hydrogen production via water splitting. Yet, the pursuit of enhanced efficiency and amplified hydrogen generation has prompted researchers to delve into the realm of advanced doping strategies. In this work, using experimental characteristics and DFT calculations, we studied the effect of cobalt substitution on the structural, electronic, optical, and magnetic properties as well as the photocatalytic activity of SrTi1-xCoxO3-δ (x = 0, 0.125, 0.25, 0.375, and 0.5) perovskites. The samples were successfully prepared by using the solid-state reaction method. Based on X-ray diffraction and the Rietveld refinement method, the elaborated samples were shown to preserve the absorption range up to the visible region. Moreover, the position of band edge levels after cobalt doping becomes more appropriate for water splitting. Our findings report that all cobalt-doped compounds exhibit good photocatalytic activities and could be used as suitable photocatalyst materials for hydrogen production.

An Iron-Doped Calcium Titanate Cocatalyst for the Oxygen Reduction Reaction

The oxygen reduction reaction (ORR) is an important challenge in the development and large-scale distribution of energy conversion devices, especially low-temperature proton exchange membrane (PEM) fuel cells. In order to speed up the ORR kinetics and improve fuel cell performance, iron-doped calcium titanate (CTFO) is proposed as a cocatalyst. Fundamental physical and chemical characterizations by means of X-ray diffraction, infrared spectroscopy, and morphological and thermal analyses for the understanding of the functional features of the proposed materials were carried out. Composite catalysts containing different amounts of CTFO additive with respect to platinum (i.e., Pt:CTFO 1:0.5 and 1:1 wt:wt) were studied using a rotating disk electrode (RDE). Fuel cell tests were performed at 80 °C under 30% and 80% relative humidity. The best Pt:CTFO composite catalyst was compared to a bare Pt/C and a Pt/C:CaTiO3−δ 1:1 catalyst, revealing superior performances of the latter at high relative humidity fuel cell operation, as a combined result of an optimized electrolyte-electrode interface and improved ORR kinetics due to the inorganic additive.

Transition metal oxides with perovskite and spinel structures for electrochemical energy production applications

Transition metal oxide-based materials are an interesting alternative to substitute noble-metal based catalyst in energy conversion devices designed for oxygen reduction (ORR), oxygen evolution (OER) and hydrogen evolution reactions (HER). Perovskite (ABO₃) and spinel (AB₂O₄) oxides stand out against other structures due to the possibility of tailoring their chemical composition and, consequently, their properties. Particularly, the electrocatalytic performance of these materials depends on features such as chemical composition, crystal structure, nanostructure, cation substitution level, e_g orbital filling or oxygen vacancies. However, they suffer from low electrical conductivity and surface area, which affects the catalytic response. To mitigate these drawbacks, they have been combined with carbon materials (e.g. carbon black, carbon nanotubes, activated carbon, and graphene) that positively influence the overall catalytic activity. This review provides an overview on tunable perovskites (mainly lanthanum-based) and spinels featuring 3d metal cations such as Mn, Fe, Co, Ni and Cu on octahedral sites, which are known to be active for the electrochemical energy conversion.

Highly Active Lanthanum Perovskite Electrocatalysts (LaMnxCo1-xO3 (0 ≤ x ≤ 1)) by Tuning the Mn:Co Ratio for ORR and MOR in Alkaline Medium

Lanthanum-based perovskites (LaMnxCo1-xO3 (0 ≤ x ≤ 1)) were synthesized using a solution combustion synthesis technique with variable ratios of Co and Mn to investigate the surface property and electrocatalytic characteristics (stability and activity of catalyst) for methanol oxidation reaction (MOR), oxygen reduction reaction (ORR), and oxygen evolution reaction (OER) under alkaline medium (KOH). The structural, chemical, and morphological characterizations of the synthesized catalyst were performed by XRD, FTIR, SEM, TEM, and XPS techniques as a function of the Mn:Co elemental ratio. The time–temperature profile during the combustion process was also monitored to study the completion of the combustion reaction and to understand its impact on the structure of the perovskites. SEM/EDX and XPS analysis confirmed the formation of the targeted ratio of Mn and Co on the catalyst. Cyclic voltammetry (CV) and linear sweep voltammetry (LSV) results revealed that all perovskite samples with different Co:Mn ratios were active for ORR, OER, and MOR. The LaMnxCo1-xO3 perovskite with x = 0.4 showed the highest current density compared to the other samples toward all the electrocatalytic reactions under alkaline reaction conditions.

Graphical Abstract

Recent Advances in Perovskite Catalysts for Efficient Overall Water Splitting

Hydrogen is considered a promising clean energy vector with the features of high energy capacity and zero-carbon emission. Water splitting is an environment-friendly and effective route for producing high-purity hydrogen, which contains two important half-cell reactions, namely, the anodic oxygen evolution reaction (OER) and the cathodic hydrogen evolution reaction (HER). At the heart of water splitting is high-performance electrocatalysts that efficiently improve the rate and selectivity of key chemical reactions. Recently, perovskite oxides have emerged as promising candidates for efficient water splitting electrocatalysts owing to their low cost, high electrochemical stability, and compositional and structural flexibility allowing for the achievement of high intrinsic electrocatalytic activity. In this review, we summarize the present research progress in the design, development, and application of perovskite oxides for electrocatalytic water splitting. The emphasis is on the innovative synthesis strategies and a deeper understanding of structure–activity relationships through a combination of systematic characterization and theoretical research. Finally, the main challenges and prospects for the further development of more efficient electrocatalysts based on perovskite oxides are proposed. It is expected to give guidance for the development of novel non-noble metal catalysts in electrochemical water splitting.

Structural, magnetic, and dielectric properties of solution combustion synthesized LaFeO3, LaFe0.9Mn0.1O3, and LaMnO3 perovskites

Nanocrystalline LaFeO3, LaFe0.9Mn0.1O3, and LaMnO3 perovskites have been synthesized by a novel solution combustion route, wherein oxalyl dihydrazide has been used as a fuel. These materials have been characterized by...

Evolution mechanism of transition metal in NH3-SCR reaction over Mn-based bimetallic oxide catalysts: Structure-activity relationships

The unexpected phenomenon in which different transition metals (Co, Ni and Cu) presented significant variation of participation levels as the auxiliaries in Mn-based bimetallic oxide catalysts were reported here. It is found that the Co element more easily to form Mn enriched surface bimetallic oxides with Mn than Ni and Cu, resulting in Co-MnO_x exhibited the best deNO_x activity and SO₂ tolerance, followed by Ni-MnO_x and Cu-MnO_x. The role of different transition metal and structure-activity relationships were systematically investigated by advanced techniques including Synchrotron XAFS and in situ DRIFTs analysis. The excellent activity of Co-MnO_x was related to its unique Mn-enriched surface (Co²⁺)_tet(Mn³⁺ Co³⁺)_octO₄ structure with Mn cations occupying the octahedral sites, which is superior to the Ni-MnO_x and Cu-MnO_x with Mn-lean surface. In addition, the reaction energy barrier of Co-MnO_x is weakened due to the lower electron cloud density around the Mn atom as compared to Ni-MnO_x and Cu-MnO_x. Moreover, Co-MnO_x benefiting from the rapid electron migration between Mn and Co, more active bidentate/bridged nitrates could react with adsorbed NH₃ in faster reaction rates following the L-H mechanism.

Graphene Nanosheet-Wrapped Mesoporous La0.8Ce0.2Fe0.5Mn0.5O3 Perovskite Oxide Composite for Improved Oxygen Reaction Electro-Kinetics and Li-O2 Battery Application

A novel design and synthesis methodology is the most important consideration in the development of a superior electrocatalyst for improving the kinetics of oxygen electrode reactions, such as the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) in Li-O₂ battery application. Herein, we demonstrate a glycine-assisted hydrothermal and probe sonication method for the synthesis of a mesoporous spherical La_0.8Ce_0.2Fe_0.5Mn_0.5O₃ perovskite particle and embedded graphene nanosheet (LCFM(8255)-gly/GNS) composite and evaluate its bifunctional ORR/OER kinetics in Li-O₂ battery application. The physicochemical characterization confirms that the as-formed LCFM(8255)-gly perovskite catalyst has a highly crystalline structure and mesoporous morphology with a large specific surface area. The LCFM(8255)-gly/GNS composite hybrid structure exhibits an improved onset potential and high current density toward ORR/OER in both aqueous and non-aqueous electrolytes. The LCFM(8255)-gly/GNS composite cathode (ca. 8475 mAh g⁻¹) delivers a higher discharge capacity than the La_0.5Ce_0.5Fe_0.5Mn_0.5O₃-gly/GNS cathode (ca. 5796 mAh g⁻¹) in a Li-O₂ battery at a current density of 100 mA g⁻¹. Our results revealed that the composite’s high electrochemical activity comes from the synergism of highly abundant oxygen vacancies and redox-active sites due to the Ce and Fe dopant in LaMnO₃ and the excellent charge transfer characteristics of the graphene materials. The as-developed cathode catalyst performed appreciable cycle stability up to 55 cycles at a limited capacity of 1000 mAh g⁻¹ based on conventional glass fiber separators.

Optimized Conductivity and Spin States in N-Doped LaCoO3 for Oxygen Electrocatalysis

The spin state of antibonding orbital (e_g) occupancy in LaCoO₃ is recognized as a descriptor for its oxygen electrocatalysis. However, the Co(III) cation in typical LaCoO₃ (LCO) favors low spin state, which is mediocre for absorbing oxygen-containing groups involved in oxygen evolution reaction (OER) and oxygen reduction reaction (ORR), thus hindering its further development in electrocatalysis. Herein, both experimental and theoretical results reveal the enhancement of bifunctional electrocatalytic activity in LaCoO₃ by N doping. More specifically, electron energy loss spectroscopy and superconducting quantum interference devices magnetic analysis demonstrate that the Co(III) cation in N-doped LaCoO₃ (LCON) achieves a moderate e_g occupancy (≈1) compared with its low spin state in LaCO₃. First-principle calculation results reveal that N dopants play a bifunctional role of tuning the spin-state transition of Co(III) cations and increasing the electrical conductivity of LCO. Thus, the optimized LCON exhibits an OER overpotential of 1.69 V at the current density of 50 mA/cm² (1.94 V for pristine LCO) and yields an ORR limiting current density of 5.78 mA/cm² (4.01 mA/cm² for pristine LCO), which offers a new strategy to simultaneously modulate the magnetic and electronic structures of LCO to further enhance its electrocatalytic activity.

GdFeO3 Perovskite Oxide Decorated by Group X Heterometal Oxides and Bifunctional Oxygen Electrocatalysis

Bifunctional electrocatalysts for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) are necessary in the renewable energy systems. However, the kinetically slow and large energy-demanding procedures of oxygen electrocatalysis make the preparation of bifunctional catalysts difficult. In this work, we report a novel hierarchical GdFeO₃ perovskite oxide of a spherelike nanostructure and surface modification with the group X heterometal oxides. The nanostructured GdFeO₃ layer behaved as a bifunctional electrocatalyst in the oxygen electrocatalysis of OER and ORR. Moreover, the surface decoration with catalytically active PtO_x + Ni/NiO nanoparticles enhanced the electrocatalytic performances substantially. Incorporation of mesoporous PtO_x + Ni/NiO nanoparticles into the porous GdFeO₃ nanostructure enlarged the electrochemically active surface area and provided the interconnected nanostructures to facilitate the OER/ORR. The nanostructures were visualized by scanning electron microscopy and transmission electron microscopy images, and the surface area and pore size of nanoparticles were analyzed from N₂ adsorption/desorption isotherms. Tafel analysis indicates that surface modification effectively improves the kinetics of oxygen reactions and accordingly increases the electrocatalytic efficiency. Finally, the 2 wt % PtO_x + NiO|GdFeO₃ (x = 0, 1, and 2) electrode achieved the enhanced OER performance with an overpotential of 0.19 V at 10 mA/cm² in an alkaline solution and a high turnover frequency of 0.28 s^-1 at η = 0.5 V. Furthermore, the ORR activity is observed with an onset potential of 0.80 V and a half-wave potential (E_1/2) of 0.40 V versus reversible hydrogen electrode.

Solid-State Ball-Milling of Co3O4 Nano/Microspheres and Carbon Black Endorsed LaMnO3 Perovskite Catalyst for Bifunctional Oxygen Electrocatalysis

Developing a highly stable and non-precious, low-cost, bifunctional electrocatalyst is essential for energy storage and energy conversion devices due to the increasing demand from the consumers. Therefore, the fabrication of a bifunctional electrocatalyst is an emerging focus for the promotion and dissemination of energy storage/conversion devices. Spinel and perovskite transition metal oxides have been widely explored as efficient bifunctional electrocatalysts to replace the noble metals in fuel cell and metal-air batteries. In this work, we developed a bifunctional catalyst for oxygen reduction and oxygen evolution reaction (ORR/OER) study using the mechanochemical route coupling of cobalt oxide nano/microspheres and carbon black particles incorporated lanthanum manganite perovskite (LaMnO3@C-Co3O4) composite. It was synthesized through a simple and less-time consuming solid-state ball-milling method. The synthesized LaMnO3@C-Co3O4 composite was characterized by scanning electron microscopy, energy dispersive X-ray spectroscopy, transmission electron microscopy, Brunauer-Emmett-Teller (BET) analysis, X-ray diffraction spectroscopy, and micro-Raman spectroscopy techniques. The electrocatalysis results showed excellent electrochemical activity towards ORR/OER kinetics using LaMnO3@C-Co3O4 catalyst, as compared with Pt/C, bare LaMnO3@C, and LaMnO3@C-RuO2 catalysts. The observed results suggested that the newly developed LaMnO3@C-Co3O4 electrocatalyst can be used as a potential candidate for air-cathodes in fuel cell and metal-air batteries.

Clarifying the Role of the Reducers-to-Oxidizers Ratio in the Solution Combustion Synthesis of Ba0.5Sr0.5Co0.8Fe0.2O3-δ Oxygen Electrocatalysts

Ba0.5Sr0.5Co0.8Fe0.2O3-δ perovskite-type compounds are well-known mixed ionic-electronic conductors for oxygen electrocatalytic applications, although their performance is strictly dependent on the selected preparation methodology and processing parameters. The reducers-to-oxidizers ratio (Φ) is a very important parameter in the solution combustion synthesis of mixed ionic-electronic conductors. Selection of Φ is not trivial and it strongly depends on the type of fuel used, the chemical composition and the specific application of the material. This work clarifies the role of Φ in the solution combustion synthesis of Ba0.5Sr0.5Co0.8Fe0.2O3-δ for application as oxygen electrocatalysts. Ba0.5Sr0.5Co0.8Fe0.2O3-δ powders were synthesized by solution combustion synthesis using sucrose-polyethylene glycol fuel mixtures with reducers-to-oxidizers ratio values between 1 (stoichiometric) and 3 (over-stoichiometric). Chemical-physical properties were studied by X-ray diffraction, scanning electron microscopy, N2 adsorption at −196 °C, H2-temperature programmed reduction and thermogravimetric analysis. The results evidenced the direct role of Φ on the intensity and redox environment of the combustion process, and its indirect influence on the Ba0.5Sr0.5Co0.8Fe0.2O3-δ electrode materials properties. Taking into account the general picture, the highly over-stoichiometric Φ was selected as the optimal one and the electrochemical activity of the corresponding powder was tested by electrochemical impedance spectroscopy on electrolyte-supported half-cells employing a Ce0.8Sm0.2O2-x electrolyte.

Carbon Material and Cobalt-Substitution Effects in the Electrochemical Behavior of LaMnO3 for ORR and OER

LaMn_1−xCo_xO₃ perovskites were synthesized by a modified sol-gel method which incorporates EDTA. These materials’ electrochemical activity towards both oxygen reduction (ORR) and oxygen evolution reactions (OER) was studied. The cobalt substitution level determines some physicochemical properties and, particularly, the surface concentration of Co and Mn’s different oxidation states. As a result, the electroactivity of perovskite materials can be tuned using their composition. The presence of cobalt at low concentration influences the catalytic activity positively, and better bifunctionality is attained. As in other perovskites, their low electrical conductivity limits their applicability in electrochemical devices. It was found that the electrochemical performance improved significantly by physically mixing with a mortar the active materials with two different carbon black materials. The existence of a synergistic effect between the electroactive component and the carbon material was interpreted in light of the strong carbon–oxygen–metal interaction. Some mixed samples are promising electrocatalysts towards both ORR and OER.

Electrodeposited Co-Substituted LaFeO3 for Enhancing the Photoelectrochemical Activity of BiVO4

Co-substituted LaFeO₃ was electrodeposited on the surface of BiVO₄ as a co-catalyst to enhance the water splitting performance. Compared to bare BiVO₄, the BiVO₄/Co-LaFeO₃ composite photoanode shows a water oxidation photocurrent of 3.4 mA/cm² at 1.23 V versus reverse hydrogen electrode, accompanied by a notable cathodic shift in the onset potential for 300 mV. Combined optical and electrochemical characterizations show that the solid/electrolyte charge transfer efficiency of BiVO₄ are dramatically improved by the incorporation of Co-substituted LaFeO₃. From the surface kinetic study of charge carriers by intensity-modulated photocurrent spectroscopy, a suppressed surface recombination rate constant is observed and the enhanced photoelectrochemical water splitting performance observed in the BiVO₄/Co-LaFeO₃ photoanode is attributed to the surface passivation effect of Co-substituted LaFeO₃.

Galvanic Exchange as a Novel Method for Carbon Nitride Supported CoAg Catalyst Synthesis for Oxygen Reduction and Carbon Dioxide Conversion

A bimetallic alloy of CoAg nanoparticles (NPs) on a carbon nitride (CN) surface was synthesized using a galvanic exchange process for the oxygen reduction reaction (ORR) and carbon dioxide electrocatalytic conversion. The reduction potential of cobalt is ([Co2+(aq) + 2e− → Co(s)], −0.28 eV) is smaller than that of Ag ([Ag+(aq) + e− → Ag(s)], 0.80 eV), which makes Co(0) to be easily replaceable by Ag+ ions. Initially, Co NPs (nanoparticles) were synthesized on a CN surface via adsorbing the Co2+ precursor on the surface of CN and subsequently reducing them with NaBH4 to obtain Co/CN NP. The Co NPs on the surface of CN were then subjected to galvanic exchange, where the sacrificial Co atoms were replaced by Ag atoms. As the process takes place on a solid surface, only the partial replacement of Co by Ag was possible generating CoAg/CN NPs. Synthesized CoAg/CN bimetallic alloy were characterized using different techniques such as powder x-ray diffraction (PXRD), x-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and electron diffraction spectroscopy (EDS) to confirm the product. Both the catalysts, Co/CN and CoAg/CN, were evaluated for oxygen reduction reaction in 1M KOH solution and carbon dioxide conversion in 0.5 M KHCO3. In the case of ORR, the CoAg/CN was found to be an efficient electrocatalyst with the onset potential of 0.93 V, which is comparable to commercially available Pt/C having Eonset at 0.91 V. In the electrocatalytic conversion of CO2, the CoAg/CN showed better performance than Co/CN. The cathodic current decreased dramatically below −0.9V versus Ag/AgCl indicating the high conversion of CO2.

Low Temperature Activation of Carbon Dioxide by Ammonia in Methane Dry Reforming—A Thermodynamic Study

Methane dry reforming (MDR) is an attractive alternative to methane steam reforming for hydrogen production with low harmful environmental emissions on account of utilizing carbon dioxide in the feed. However, carbon formation in the product stream has been the most challenging aspect of MDR, as it leads to catalyst deactivation by coking, prevalent in hydrocarbon reforming reactions. Common strategies to limit coking have mainly targeted catalyst modifications, such as by doping with rare earth metals, supporting on refractory oxides, adding oxygen/steam in the feed, or operating at reaction conditions (e.g., higher temperature), where carbon formation is thermodynamically restrained. These methods do help in suppressing carbon formation; nonetheless, to a large extent, catalyst activity and product selectivity are also adversely affected. In this study, the effect of ammonia addition in MDR feed on carbon suppression is presented. Based on a thermodynamic equilibrium analysis, the most significant observation of ammonia addition is towards low temperature carbon dioxide activation to methane, along with carbon removal. Results indicate that ammonia not only helps in removing carbon formation, but also greatly enriches hydrogen production.

Synthesis of Highly Efficient Bifunctional Ag/Co3O4 Catalyst for Oxygen Reduction and Oxygen Evolution Reactions in Alkaline Medium

Ag/Co3O4 catalysts using three different modes of solution combustion synthesis were developed and characterized by X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, and transmission electron microscopy to identify crystallite size, oxidation state, composition, and morphology. Cyclic voltammetry and linear sweep voltammetry measurements for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) confirm the bifunctionality of the electrocatalysts. The electrochemical evaluation indicates that a synergic effect between Ag and Co enhances the activity through the fast breaking of O-O bond in the molecular oxygen to enhance the reduction mechanism. The high content of cobalt (Co) in the catalyst Ag/Co3O4-12, synthesized by second wave combustion, improves the activity for ORR, and the reaction mechanism follows a 3.9 number of electron transfer in overall reaction. The kinetic and limiting current densities of Ag/Co3O4-12 are maximum when compared to those of other Ag/Co3O4 catalysts and are very close to commercial Pt/C. Moreover, the maximum current density of OER for Ag/Co3O4-12 makes it a promising candidate for various bifunctional electrocatalytic applications such as fuel cells and metal-air batteries.

Role of ceria in the improvement of NO removal of lanthanum-based perovskite-type catalysts

Lanthanum-based perovskite-type oxides represented by LaBO3 (B = Co, Fe, Mn) have been thought to present strong limitations for practical application although they are active for catalytic removal of NO. Cerium (Ce) substitution has been extensively studied to modify the properties of perovskites. It is noted that a new phase of ceria (CeO2) can be separated from perovskites when the doping ratio exceeds the solution limit (x > S). This review outlines the relationship between the existence of CeO2 phase and catalytic activity. CeO2 dispersing on the lattice surface or small particles are beneficial for catalytic activity, but larger particles are adverse. Ce-doped LaBO3 perovskites exhibiting the best activity must contain additional CeO2 phases. In addition, CeO2-supported LaBO3 perovskite catalysts are discussed.