In situ encapsulation of tin oxide and cobalt oxide composite in porous carbon for high-performance energy storage applications

Kenaf-based activated carbon: A sustainable solution for high-performance aqueous symmetric supercapacitors

This study presents an innovative method for synthesizing activated carbon with an exceptionally high surface area (3359 m2 g-1) using kenaf fiber-based biochar through chemical activation. The achieved specific surface area surpasses activated carbon derived from other reported fiber-based precursors. The resulting activated carbon was investigated as electrodes for supercapacitors, revealing a remarkable maximum capacitance of 312 F g-1 at a current density of 0.5 A g-1. An aqueous symmetric supercapacitor employing these high-surface-area electrodes exhibited an outstanding energy density of 18.9 Wh kg-1 at a power density of 250 W kg-1. Notably, the supercapacitor retained exceptional capacitance, maintaining 93% of its initial capacitance even after 5000 charge-discharge cycles.

Activated Biocarbon from Paper Mill Sludge as Electrode Material for Supercapacitors: Comparative Performance Evaluation in Two Aqueous Electrolytes

The valorization of a South African paper mill waste sludge into an activated biocarbon electrode material for energy storage application is reported. The valorization method is a two-step synthesis that comprises hydrothermal carbonization and NaOH activation of paper mill waste at 700 °C to produce activated biocarbon. The development of high porosity carbon material with a surface area of 1139 m²/g was observed. The synthesized biocarbon electrode exhibited good specific capacitance (C _sp) values of 206 and 157 Fg^-1, from a three-electrode cell in neutral (1 M Na₂SO₄) and alkali (3 M KOH) electrolytes, respectively. The electrolyte concentration purportedly has a considerable effect on specific capacitance. In both electrolytes, symmetric triangular curves in galvanostatic charge-discharge point to a quick charge-discharge process. Synthesized material testing with a two-electrode cell in 3 M KOH and 1 M Na₂SO₄ electrolytes, respectively, delivered specific capacitances of 125 and 152 Fg^-1, with the corresponding energy densities of 17.4 and 21.1 Wh kg^-1. The material had capacity retention efficiencies of 83 and 92% after 5000 cycles in 3 M KOH and 1 M Na₂SO₄ electrolytes, respectively. The electrode material performance of the activated biocarbon from paper sludge clearly shows its potential for electrochemical energy storage. The reported results present an exciting potential contribution of the pulp and paper industry toward the transition to green energy.

Non-Destructive Analysis of a High-Power Capacitor Using High-Energy X-ray Compton Scattering

Changes in the internal state of a high-power capacitor during progressive charge–discharge cycling were measured non-destructively using high-energy synchrotron X-ray Compton scattering. The stacked structure of a laminated capacitor was clearly indicated by a Compton scattered X-ray intensity analysis and a line shape (S-parameter) analysis of a Compton scattered X-ray energy spectrum. Moreover, apparent differences in the progress of charge and discharge cycles were observed in the correlation between Compton scattered X-ray intensities and S-parameters obtained from the center and edge positions within the in-plane of the electrode. This difference in the correlation was obtained from the shifting of the stacked structure at the edge position, induced by the drift of the electrolyte material within the capacitor cells.

Facile preparation of hierarchical MgCo2O4/MgCo2O4 nanochain array composites on Ni foam as advanced electrode materials for supercapacitors

Schematic illustration of the two-step synthesis of MgCo₂O₄/MgCo₂O₄ directly grown on Ni foam.

Facile fabrication of thin metal oxide films on porous carbon for high density charge storage

In an effort to minimize the usage of non-renewable materials and to enhance the functionality of the renewable materials, we have developed thin metal oxide coated porous carbon derived from a highly abundant non-edible bio resource, i.e., palm kernel shell, using a one-step activation-coating procedure and demonstrated their superiority as a supercapacitive energy storage electrode. In a typical experiment, an optimized composition contained ~10 wt% of Mn₂O₃ on activated carbon (AC); a supercapacitor electrode fabricated using this electrode showed higher rate capability and more than twice specific capacitance than pure carbon electrode and could be cycled over 5000 cycles without any appreciable capacity loss in 1 M Na₂SO₄ electrolyte. A symmetric supercapacitor prototype developed using the optimum electrode showed nearly four times higher energy density than the pure carbon owing to the enhancements in voltage window and capacitance. A lithium ion capacitor fabricated in half-cell configuration using 1 M LiPF₆ electrolyte showed larger voltage window, superior capacitance and rate capability in the ~10 wt% Mn₂O₃ @AC than the pure analogue. These results demonstrate that the current protocol allows fabrication of superior charge storing electrodes using renewable materials functionalized by minimum quantity of earthborn materials.

Electrolyte selection for supercapacitive devices: a critical review

Electrolytes are one of the vital constituents of electrochemical energy storage devices and their physical and chemical properties play an important role in these devices' performance, including capacity, power density, rate performance, cyclability and safety. This article reviews the current state of understanding of the electrode-electrolyte interaction in supercapacitors and battery-supercapacitor hybrid devices. The article discusses factors that affect the overall performance of the devices such as the ionic conductivity, mobility, diffusion coefficient, radius of bare and hydrated spheres, ion solvation, viscosity, dielectric constant, electrochemical stability, thermal stability and dispersion interaction. The requirements needed to design better electrolytes and the challenges that still need to be addressed for building better supercapacitive devices for the competitive energy storage market have also been highlighted.