One-step voltammetric deposition of l-proline assisted silver nanoparticles modified glassy carbon electrode for electrochemical detection of hydrogen peroxide

Highly dispersed noble metal nanoparticle composites on biomass-derived carbon-based carriers: synthesis, characterization, and catalytic applications

Precious metal nanoparticles have been widely investigated due to their excellent activity shown in catalysis and sensing. However, how to prepare highly dispersed noble metal nanoparticles to improve the lifetime of catalysts and reduce the cost is still an urgent problem to be solved. In this study, a carbon-based carrier material was prepared by an expansion method and loaded with Pd or Ag nanoparticles on this carbon material to synthesize precious metal nanoparticle composites, which were characterized in detail. The results show that the nanoparticles prepared using this method exhibit superior dispersion. Under the synergistic effect of noble metal nanoparticles and porous carbon carriers, the composites exhibited excellent catalytic degradation of p-nitrophenol and showed excellent sensing performance in the modified hydrogen peroxide sensor electrode. This approach is highly informative for the preparation of nanocomposites in medical and environmental fields.

LDH-Based Voltammetric Sensors

Layered double hydroxides (LDHs), also named hydrotalcite-like compounds, are anionic clays with a lamellar structure which have been extensively used in the last two decades as electrode modifiers for the design of electrochemical sensors. These materials can be classified into LDHs containing or not containing redox-active centers. In the former case, a transition metal cation undergoing a reversible redox reaction within a proper potential window is present in the layers, and, therefore, it can act as electron transfer mediator, and electrocatalyze the oxidation of an analyte for which the required overpotential is too high. In the latter case, a negatively charged species acting as a redox mediator can be introduced into the interlayer spaces after exchanging the anion coming from the synthesis, and, again, the material can display electrocatalytic properties. Alternatively, due to the large specific surface area of LDHs, molecules with electroactivity can be adsorbed on their surface. In this review, the most significant electroanalytical applications of LDHs as electrode modifiers for the development of voltammetric sensors are presented, grouping them based on the two types of materials.

Electrospun nanofiber-based sensors for the detection of chemical and biological contaminants/hazards in the food industries

Food contamination reveals a major health risk globally and presents a significant challenge for the food industry. It can stem from biological contaminants like pathogens, parasites, and viruses, or chemical contaminants such as heavy metals, pesticides, drugs, and hormones. There is also the possibility of naturally occurring hazardous chemicals. Consequently, the development of sensing platforms has become crucial to accurately and rapidly identify contaminants and hazards in food products. Electrospun nanofibers (NFs) offer a promising solution due to their unique three-dimensional architecture, large specific surface area, and ease of preparation. Moreover, NFs exhibit excellent biocompatibility, degradability, and adaptability, making monitoring more convenient and environmentally friendly. These characteristics also significantly reduce the detection process of contaminants. NF-based sensors have the ability to detect a wide range of biological, chemicals, and physical hazards. Recent research on NFs-based sensors for the detection of various food contaminants/hazards, such as pathogens, pesticide/drugs residues, toxins, allergens, and heavy metals, is presented in this review.

Highly sensitive and selective electrochemical sensor for simultaneous determination of gallic acid, theophylline and caffeine using poly(l-proline) decorated carbon nanotubes in biological and food samples

In this work, a novel, simple and reproducible poly(l-proline)/functionalized multi-walled carbon nanotube composite on glassy carbon electrode (poly(PRO)-MWCNTs/GCE) was developed as an electrochemical sensor for the simultaneous determination of gallic acid (GA), theophylline (TP) and caffeine (CAF) by differential pulse voltammetry (DPV). The sensing platform was optimized by experimental design and response surface methodology, using various factors affecting polymerization and detection, such as electropolymerization time and potential, and pH, respectively. As a result, the dispersion conditions were the mixing of 1.78 mg MWCNTs with 1.00 mL l-proline solution to 4.14 mg mL-1 (in SDBS 0.5%), followed by 21 min of sonication with electropolymerization by 16 cyclic scans. In addition, the final analysis was performed at a pH of 3.00 and prior accumulation at 0.350 V for 40 s. The electrochemical behavior of GA, TP and CAF on the optimized sensor was investigated. As a result, the electrode preserves and synergistically combines the properties of each modifier. This new electrochemical sensor showed superior electrocatalytic properties for the oxidation of GA, TP and CAF, which significantly improved the sensitivity of the three compounds. Under the optimized experimental conditions, the detection limits achieved by S/N were 0.03, 0.04 and 0.11 μmol L-1 for GA, TP and CAF, respectively. The analysis of real samples was successfully performed in human breast milk, tea, infusion of yerba mate, coffee, Coca-Cola zero and energy drink, showing good recoveries, ranged between 87 and 108%. The proposed sensor also showed good selectivity, repeatability and reproducibility, indicating feasibility and reliability. This is the first time that the l-proline monomer is used as a dispersant for MWCNTs and as a precursor for the in-situ polymerization of the proline polymer. Previously, the electropolymerizations were carried out with the monomer in solution rather than as an exfoliant of MWCNTs, where the polymer is electrosynthesized between MWCNTs rather than on them. In this way, the large specific surface area and strong adsorption ability of the nanomaterial are enhanced, and the ability to promote electron transfer reaction is increased, which provides enough effective reaction sites.

Novel Electrochemical Sensors Based on L-Proline Assisted LDH for H2O2 Determination in Healthy and Diabetic Urine

In this paper, a novel non-enzymatic modified glassy carbon (GC) sensor, of the (GC-Ag_paste)-catalytic proline-assisted LDH type, for H₂O₂ determination was fabricated, studied, characterized and employed to determine the hydrogen peroxide content in healthy and diabetic human urine. LDH (whose composition can be schematized as [Zn^IIAl^III (OH)₂]⁺ NO₃^-·nH₂O) is glued to glassy carbon by means of silver paste, while proline, which increases the catalytic properties of LDH, is used free in solution in the phosphate buffer. A voltametric survey was first conducted to ascertain the positive effect induced by the presence of proline, i.e., the increase of sensor sensitivity. Then a deep study of the new three-electrode amperometric proline-assisted LDH sensor, whose working electrode was of the same type as the one used to perform the cyclic voltammetry, was carried out, working at first in static air, then in a nitrogen atmosphere. Possible interferences from various substances, both oxidants and antioxidants, were also investigated. Lastly, the new amperometric sensor was successfully used to determine the H₂O₂ level in human urine from both healthy and diabetic subjects. The effect of proline in enhancing the properties of the sensor system was also investigated. The limit of detection (LOD) of the new catalytic sensor was of the order of 0.15 mmol L^-1, working in air, and of 0.05 µmol L^-1, working in nitrogen atmosphere.

Advances in constructing silver nanowire-based conductive pathways for flexible and stretchable electronics

With their soaring technological demand, flexible and stretchable electronics have attracted many researchers' attention for a variety of applications. The challenge which was identified a decade ago and still remains, however, is that the conventional electrodes based on indium tin oxide (ITO) are not suitable for ultra-flexible electronic devices. The main reason is that ITO is brittle and expensive, limiting device performance and application. Thus, it is crucial to develop new materials and processes to construct flexible and stretchable electrodes with superior quality for next-generation soft devices. Herein, various types of conductive nanomaterials as candidates for flexible and stretchable electrodes are briefly reviewed. Among them, silver nanowire (AgNW) is selected as the focus of this review, on account of its excellent conductivity, superior flexibility, high technological maturity, and significant presence in the research community. To fabricate a reliable AgNW-based conductive network for electrodes, different processing technologies are introduced, and the corresponding characteristics are compared and discussed. Furthermore, this review summarizes strategies and the latest progress in enhancing the conductive pathway. Finally, we showcase some exemplary applications and provide some perspectives about the remaining technical challenges for future research.

A facile construction of Ag/MoSe2 composite based non-enzymatic amperometric sensor for hydrogen peroxide

We report an electrochemical non-enzymatic method for hydrogen peroxide (H2O2) detection based on Ag nanoparticle-decorated MoSe2 (Ag/MoSe2-500) hybrid nanostructures. These hybrid nanocomposites are easily prepared by in-situ reduction of Ag+...

Development of a surface-modified paper-based colorimetric sensor using synthesized Ag NPs-alginate composite

There has been an increase in the discovery and usage of sensors for the detection of chemical compounds in the field of analytical chemistry since the last several years. This has led to progressive research in nanotechnology for developing efficient nanomaterials for bio-chemical sensing applications. Thereby, a deft synthesis of silver nanoparticles (Ag NPs) under microwave irradiation was achieved using sodium alginate as a reducing and capping agent in a fast and cost-effective approach. As per the X-ray diffraction analysis, the average particle size of Ag NPs was found to be 10 nm. X-ray photoelectron spectroscpopy analysis showed characteristic peaks at binding energies of 368.10 and 374.11 eV indicating the formation of Ag NPs. The synthesized Ag NPs-alginate composite was further used to develop a paper-based sensor for the detection of H₂O₂. Detection of H₂O₂ is based on the discolouration of the Ag NPs-alginate composite modified paper sensor as a function of H₂O₂ concentration. The analysis of the decoloured paper strips was done by a smartphone camera and an RGB Colour Reader application (app) to measure colour intensity. The sensing characteristics were found in the range of 0.1-10 mM. The colour analysis revealed piecewise linear relationship of intensity of RGB to H₂O₂ concentration in the range of 0.1-1.5 and 2-10 mM with R² values of 0.97 and 0.9778, respectively. Owing to the high sensitivity, selectivity, and cost-effectiveness, the developed paper sensor can be a potential tool for real-time analysis of H₂O₂.

One-step Synthesized Silver Nanoparticles Using Isoimperatorin: Evaluation of Photocatalytic, and Electrochemical Activities

In the current study, isoimperatorin, a natural furanocoumarin, is used as a reducing reagent to synthesize isoimperatorin mediated silver nanoparticles (Iso-AgNPs), and photocatalytic and electrocatalytic activities of Iso-AgNPs are evaluated. Iso-AgNPs consisted of spherically shaped particles with a size range of 79-200 nm and showed catalytic activity for the degradation (in high yields) of New Fuchsine (NF), Methylene Blue (MB), Erythrosine B (ER) and 4-chlorophenol (4-CP) under sunlight irradiation. Based on obtained results, Iso-AgNPs exhibited 96.5%, 96.0%, 92%, and 95% degradation rates for MB, NF, ER, and 4-CP, respectively. The electrochemical performance showed that the as-prepared Iso-AgNPs exhibited excellent electrocatalytic activity toward hydrogen peroxide (H2O2) reduction. It is worth noticing that the Iso-AgNPs were used as electrode materials without any binder. The sensor-based on binder-free Iso-AgNPs showed linearity from 0.1 µM to 4 mM with a detection limit of 0.036 μM for H2O2. This binder-free and straightforward strategy for electrode preparation by silver nanoparticles may provide an alternative technique for the development of other nanomaterials based on isoimperatorin under green conditions. Altogether, the application of isoimpratorin in the synthesis of nano-metallic electro and photocatalysts, especially silver nanoparticles, is a simple, cost-effective and efficient approach.

Tuning from Quantum Dots to Magic Sized Clusters of CsPbBr3 Using Novel Planar Ligands Based on the Trivalent Nitrate Coordination Complex

We report the first demonstration of using trivalent metal hydrated nitrate coordination complexes (TMHNCCs) as novel passivation ligands to control the synthesis of magic sized clusters (MSCs) and quantum dots (QDs) of CsPbBr₃ perovskite at room temperature. We can easily tune from QDs to MSCs or produce a mixture of the two by changing the amount of TMHNCC ligands used, with more ligands favoring MSCs. The original TMHNCC introduced, aluminum nitrate nonahydrate [ANN, Al(NO₃)₃·9H₂O], led to the production of aluminum dihydroxide nitrate tetrahydrate {ADNT, [Al(OH)₂(NO₃)]·4H₂O}, with the assistance of oleic acid (OA) and oleylamine (OAm). Through several control experiments, we determined that ADNT is the primary ligand for effectively passivating the MSCs and QDs, with OAm being essential for deprotonating ANN and OA for adjusting the pH of the reaction system. We suggest that ADNT is planar on the surface of the MSCs or QDs with its NO₃^- and OH^- groups binding to the Cs⁺ and Pb²⁺ defect sites and Al³⁺ binding to the Br^- defect sites of the MSCs or QDs.

Controlled Tuning of the Size of Ag-Hydrosol Nanoparticles by Nonstabilized THF and Detection of Peroxides in THF

Surface plasmon extinction (SPE) spectra of plasmonic nanoparticles (NPs) are sensitive indicators of their composition, size, shape, interparticle interactions, and of the dielectric constant of their ambient. In this study, rapid changes in SPE spectra of Ag NPs suggesting variations in NP size and concentration were detected after addition of aged tetrahydrofuran (THF). Using time-dependent UV/vis spectroscopy combined with factor analysis, transmission electron microscopy imaging, selected-area electron diffraction, and energy-dispersive X-ray analysis, we observed that an over-limit amount of aged THF fully dissolved Ag NPs with no plasmon recovery. By contrast, an under-limit amount led to incomplete dissolution of Ag NPs and, after reaching the turnover point, to spontaneous recrystallization on residual Ag nuclei, as demonstrated by the SPE band intensity recovery to the original or even higher values. The newly formed Ag NPs were isometric, and their diameter was dependent on the added amount of THF. Furthermore, both Ag NP dissolution and recrystallization were caused by THF peroxides and their reduction products. Therefore, the dissolution of Ag NPs and the resulting hydrosol bleaching may be used as an indicator of the presence of peroxides in THF. Moreover, the reaction of aged THF with Ag NPs can be employed as a tool for tuning the size of Ag NPs in hydrosols.