A facile fabrication of micro/nano-sized silicon/carbon composite with a honeycomb structure as high-stability anodes for lithium-ion batteries

Novel binary regulated silicon-carbon materials as high-performance anodes for lithium-ion batteries

The massive volume dilation, unsteady solid electrolyte interphase, and weak conductivity about Si have failed to bring it to practical applications, although its potential capacity is up to 4200 mAh g-1. For solving these problems, novel binary regulated silicon-carbon materials (Si/BPC) were done by a sol-gel procedure combined with single carbonization. Analytical techniques were systematically utilized to examine the effects of element doping at several gradients on morphology, structure and electrochemical properties of composites, thus the optimal content was identified. Si/BPC preserves a discharge specific capacity of 1021.6 mAh g-1with a coulomb efficiency of 99.27% after 180 cycles at 1000 mA g-1, within the upgrade than single-doped and undoped. In rate test, it has a specific capacity of 1003.2 mAh g-1at a high current density of 5000 mA g-1, quickly back towards 2838.6 mAh g-1at 200 mA g-1. The inclusion of B and P elements is linked to the electrochemical characteristics. In the co-doped carbon layers, the synergistic impact of doping B and P accelerates the diffusion kinetics of lithium ions, boosts diffusion rate of Li+, offers low electrochemical impedance (45.75 Ω). This brings more defects to provide transport carriers and induces a substantial amount of electrochemically active sites, which fosters the storage of Li+, thus making silicon material electrochemically more active and potential.

Ball-Milled Silicon with Amorphous Al2O3/C Hybrid Coating Embedded in Graphene/Graphite Nanosheets with a Boosted Lithium Storage Capability

Electrochemical active silicon has attracted great attention as anodes for lithium-ion batteries owing to a high theoretical capacity of 4200 mA h g^-1. In this work, ball-milled silicon particles with submicron size were strategically modified with a hybrid coating of amorphous alumina and carbon, which simultaneously embedded in a porous framework of in situ exfoliated graphene/graphite nanosheets (GGN). The composite exhibits an enhanced electrochemical performance, including high cycling stability and superior rate capability. An initial discharge capacity of 1294 mA h g^-1 and a reversible charge capacity of 1044 mA h g^-1 at 0.2 A g^-1 can be achieved with a high initial Coulombic efficiency of up to ca. 81%. Additionally, the composite can remain 902 mA h g^-1 after 100 discharge/charge cycles, accounting for a high retention of about 86%. This silicon composite is a promising anode material for high performance lithium-ion batteries with a high energy density, and the facile one-pot fabrication route is low cost and scalable, with a great prospect for practical application.

Flexible Porous Silicon/Carbon Fiber Anode for High-Performance Lithium-Ion Batteries

We demonstrate a cross−linked, 3D conductive network structure, porous silicon@carbon nanofiber (P−Si@CNF) anode by magnesium thermal reduction (MR) and the electrospinning methods. The P−Si thermally reduced from silica (SiO₂) preserved the monodisperse spheric morphology which can effectively achieve good dispersion in the carbon matrix. The mesoporous structure of P–Si and internal nanopores can effectively relieve the volume expansion to ensure the structure integrity, and its high specific surface area enhances the multi−position electrical contact with the carbon material to improve the conductivity. Additionally, the electrospun CNFs exhibited 3D conductive frameworks that provide pathways for rapid electron/ion diffusion. Through the structural design, key basic scientific problems such as electron/ion transport and the process of lithiation/delithiation can be solved to enhance the cyclic stability. As expected, the P−Si@CNFs showed a high capacity of 907.3 mAh g⁻¹ after 100 cycles at a current density of 100 mA g⁻¹ and excellent cycling performance, with 625.6 mAh g⁻¹ maintained even after 300 cycles. This work develops an alternative approach to solve the key problem of Si nanoparticles’ uneven dispersion in a carbon matrix.

The Size Effects of Point Defect on the Mechanical Properties of Monocrystalline Silicon: A Molecular Dynamics Study

The molecular dynamics method was used to simulate the fracture process of monocrystalline silicon with different sizes of point defect under a constant strain rate. The mechanism of the defect size on the mechanical properties of monocrystalline silicon was also investigated. The results suggested that the point defect significantly reduces the yield strength of monocrystalline silicon. The relationships between the yield strength variation and the size of point defect fitted an exponential function. By statistically analyzing the internal stress in monocrystalline silicon, it was found that the stress concentration induced by the point defect led to the decrease in the yield strength. A comparison between the theoretical strength given by the four theories of strength and actual strength proved that the Mises theory was the best theory of strength to describe the yield strength of monocrystalline silicon. The dynamic evolution process of Mises stress and dislocation showed that the fracture was caused by the concentration effect of Mises stress and dislocation slip. Finally, the fractured microstructures were similar to a kind of two-dimensional grid which distributed along the cleavage planes while visualizing the specimens. The results of this article provide a reference for evaluating the size effects of point defects on the mechanical properties of monocrystalline silicon.