Synthesis of nickel cobalt manganese metal organic framework@high quality graphene composites as novel electrode materials for high performance supercapacitors

Ni- and Co-Based MOF-Derived NixCo3-xO4 Materials: As an Efficient Anode for Direct Methanol Fuel Cell Application

Finding inexpensive and efficient anode materials is crucial for the oxidation of methanol in the direct methanol fuel cell (DMFC), which is the key electrode reaction. Herein, we report metal-organic framework (MOF)-derived Co3O4, NiO, and NixCo3-xO4 (where x = 1.5, 1, and 0.6) materials deposited on nickel foam as efficient anode material for methanol oxidation. Among them, NiCo2O4 exhibited the highest methanol oxidation activity, owing to its lowest charge-transfer resistance (0.097 Ω) and high electrochemically active surface area (1950 cm2), resulting in the lowest onset potential of 0.35 V vs Hg/HgO. The optimized Ni-to-Co ratio and synergistic effect between Ni and Co metals enable NiCo2O4 to achieve the highest mass activity of 151 mA mg-1 and geometric current density of 288 mA cm-2, demonstrating excellent durability over 14 h at 0.6 V. In addition, to optimize methanol concentration, all the electrocatalysts were tested in a range of methanol concentrations, showing 0.5 M methanol as the optimal concentration. This study focuses on optimizing the metal ratio and methanol concentration to achieve the highest catalytic activity. Additionally, this lays the foundation for developing diverse MOF-derived electrocatalysts and advancing DMFCs.

Construction of Well-Defined Two-Dimensional Architectures of Trimetallic Metal-Organic Frameworks for High-Performance Symmetric Supercapacitors

The high surface-to-volume ratio and extraordinarily large-surface area of two-dimensional (2D) metal-organic framework (MOF) architectures have drawn particular interest for use in supercapacitors. To achieve an excellent electrode material for supercapacitors, well-defined 2D nanostructures of novel trimetallic MOFs were developed for supercapacitor applications. Multivariate MOFs (terephthalate and trimesate MOF) with distinctive nanobrick and nanoplate-like structures were successfully synthesized using a straightforward one-step reflux condensation method by combining Ni, Co, and Zn metal species in equimolar ratios with two different ligands. Furthermore, the effects of the tricarboxylic and dicarboxylic ligands on cyclic voltammetry, charge-discharge cycling, and electrochemical impedance spectroscopy were studied. The derived terephthalate and trimesate MOFs are supported with stainless-steel mesh and provide a suitable electrolyte environment for rapid faradaic reactions with an elevated specific capacity, excellent rate capability, and exceptional cycling stability. It shows a specific capacitance of 582.8 F g-1, a good energy density of 40.47 W h kg-1, and a power density of 687.5 W kg-1 at 5 mA cm-2 with an excellent cyclic stability of 92.44% for 3000 charge-discharge cycles. A symmetric BDC-MOF//BDC-MOF supercapacitor device shows a specific capacitance of 95.22 F g-1 with low capacitance decay, high energy, and power densities which is used for electronic applications. These brand-new trimetallic MOFs display outstanding electrochemical performance and provide a novel strategy for systematically developing high-efficiency energy storage systems.

Graphene-Based Metal-Organic Framework Hybrids for Applications in Catalysis, Environmental, and Energy Technologies

Current energy and environmental challenges demand the development and design of multifunctional porous materials with tunable properties for catalysis, water purification, and energy conversion and storage. Because of their amenability to de novo reticular chemistry, metal-organic frameworks (MOFs) have become key materials in this area. However, their usefulness is often limited by low chemical stability, conductivity and inappropriate pore sizes. Conductive two-dimensional (2D) materials with robust structural skeletons and/or functionalized surfaces can form stabilizing interactions with MOF components, enabling the fabrication of MOF nanocomposites with tunable pore characteristics. Graphene and its functional derivatives are the largest class of 2D materials and possess remarkable compositional versatility, structural diversity, and controllable surface chemistry. Here, we critically review current knowledge concerning the growth, structure, and properties of graphene derivatives, MOFs, and their graphene@MOF composites as well as the associated structure-property-performance relationships. Synthetic strategies for preparing graphene@MOF composites and tuning their properties are also comprehensively reviewed together with their applications in gas storage/separation, water purification, catalysis (organo-, electro-, and photocatalysis), and electrochemical energy storage and conversion. Current challenges in the development of graphene@MOF hybrids and their practical applications are addressed, revealing areas for future investigation. We hope that this review will inspire further exploration of new graphene@MOF hybrids for energy, electronic, biomedical, and photocatalysis applications as well as studies on previously unreported properties of known hybrids to reveal potential "diamonds in the rough".

Application of Fiber Biochar-MOF Matrix Composites in Electrochemical Energy Storage

Fiber biochar-metal organic framework (MOF) composites were successfully prepared by three different biochar preparation methods, namely, the ionic liquid method, the pyrolysis method, and the direct composite method. The effects of the different preparation methods of fiber biochar on the physical and chemical properties of the biochar-MOF composites showed that the composite prepared by the ionic liquid method with the Zeolite-type imidazolate skeleton -67 (ZIF-67) composite after high temperature treatment exhibited a better microstructure. Electrochemical tests showed that it had good specific capacity, a fast charge diffusion rate, and a relatively good electrochemical performance. The maximum specific capacity of the composite was 63.54 F/g when the current density was 0.01 A/g in 1 mol/L KCl solution. This work explored the preparation methods of fiber biochar-MOF composites and their application in the electrochemical field and detailed the relationship between the preparation methods of the composites and the electrochemical properties of the electrode materials.