Comparison of electromyographic activity during eccentrically versus concentrically loaded isometric contractions

Resistance Training Practices of Brazilian Olympic Sprint and Jump Coaches: Toward a Deeper Understanding of Their Choices and Insights (Part III)

In the final part of this three-article collection on the training strategies of Brazilian Olympic sprint and jump coaches, we provide a detailed description of the resistance training methods and exercises most commonly employed by these speed experts. Always with the objective of maximizing the sprint and jump capabilities of their athletes, these experienced coaches primarily utilize variable, eccentric, concentric, machine-based, isometric, complex, and isoinertial resistance training methods in their daily practices. Squats (in their different forms), Olympic weightlifting, ballistics, hip thrusts, lunges, calf raises, core exercises, leg curls, stiff-leg deadlifts, and leg extension are the most commonly prescribed exercises in their training programs, during both the preparatory and competitive periods. Therefore, the current manuscript comprehensively describes and examines these methods, with the additional aim of extrapolating their application to other sports, especially those where sprint speed is a key performance factor.

Comparing the effects of dynamic and holding isometric contractions on cardiovascular, perceptual, and near-infrared spectroscopy parameters: A pilot study

The aim of this pilot study was to assess the effect of muscle contraction type on SmO2 during a dynamic contraction protocol (DYN) and a holding isometric contraction protocol (ISO) in the back squat exercise. Ten voluntary participants (age: 26.6 ± 5.0 years, height: 176.8 ± 8.0 cm, body mass: 76.7 ± 8.1 kg, and one-repetition maximum (1RM): 112.0 ± 33.1 kg) with back squat experience were recruited. The DYN consisted of 3 sets of 16 repetitions at 50% of 1RM (56.0 ± 17.4 kg), with a 120-second rest interval between sets and 2 seconds per movement cycle. The ISO consisted of 3 sets of 1 isometric contraction with the same weight and duration as the DYN (32 seconds). Through near-infrared spectroscopy (NIRS) in the vastus lateralis (VL), soleus (SL), longissimus (LG), and semitendinosus (ST) muscles, the minimum SmO2 (SmO2 min), mean SmO2 (SmO2 avg), percent change from baseline (SmO2 Δdeoxy) and time to recovery 50% of baseline value (t SmO2 50%reoxy) were determined. No changes in SmO2 avg were found in the VL, LG, and ST muscles, however the SL muscle had lower values in DYN, in the 1st set (p = 0.002) and in the 2nd set (p = 0.044). In terms of SmO2 min and ΔSmO2 deoxy, only the SL muscle showed differences (p≤0.05) and lower values in the DYN compared to ISO regardless of the set. The t SmO2 50%reoxy was higher in the VL muscle after ISO, only in the 3rd set. These preliminary data suggested that varying the type of muscle contraction in back squat with the same load and exercise time resulted in a lower SmO2 min in the SL muscle in DYN, most likely because of a higher demand for specialized muscle activation, indicating a larger oxygen supply-consumption gap.

Antagonist muscle torque at the ankle interfere with maximal voluntary contraction under isometric and anisometric conditions

While resultant maximal voluntary contraction (MVC) is commonly used to assess muscular performance, the simultaneous activation of antagonist muscles may dramatically underestimate the strength of the agonist muscles. Although quantification of antagonist torque has been performed in isometric conditions, it has yet to be determined in anisometric conditions. The aim of the study was to compare the mechanical impact of antagonist torque between eccentric, isometric and concentric contractions in PF and DF MVCs. The MVCs in dorsiflexion (DF) and plantar-flexion (PF) were measured in isometric, concentric and eccentric conditions (10° s^-1) in nine healthy men (26.1 ± 2.7 years; 1.78 ± 0.05 m; 73.4 ± 6.5 kg) through two sessions. Electromyographic (EMG) activities from the soleus, gastrocnemius medialis and lateralis, and tibialis anterior muscles were simultaneously recorded. The EMG biofeedback method was used to quantify antagonist torque. Resultant torque significantly underestimated agonist torque in DF MVC (30-65%) and to a lesser extent in PF MVC (3%). Triceps surae antagonist torque was significantly modified with muscle contraction type, showing higher antagonist torque in isometric (29 Nm) than in eccentric (23 Nm, p < 0.001) and concentric (14 Nm, p < 0.001) conditions and resulting in modification of the DF MVC torque-velocity shape. Estimation of the antagonist torque in isometric or anisometric conditions provides new relevant insights to improve neuromuscular performance assessment and to better design strength training and rehabilitation programs related to the torque applied by agonist and antagonist muscles.

A Coiled Carbon Nanotube Yarn-Integrated Surface Electromyography System To Monitor Isotonic and Isometric Movements

A surface electromyogram (sEMG) electrode collects electrical currents generated by neuromuscular activity by a noninvasive technique on the skin. It is particularly attractive for wearable systems for various human activities and health care monitoring. However, it remains challenging to discriminate EMG signals from isotonic (concentric/eccentric) and isometric movements. By applying nanotechnology, we provide a coiled carbon nanotube (CNT) yarn-integrated sEMG device to overcome sEMG-based motion recognition. When the arm was contracted at different angles, the sEMG-derived root mean square amplitude signals were constant regardless of the angle of the moving arm. However, the coiled CNT yarn-derived open circuit voltage (OCV) signals proportionally increased when the arm's angle increased, and presented negative and positive values depending on the moving direction of the arm. Moreover, isometric contraction is characterized by the onset of EMG signals without an OCV signal, and isotonic contraction is determined by both EMG signals and OCV signals. Taken together, the integration of EMG and coiled CNT yarn electrodes provides complementary information, including the strength, direction, and degree of muscle movement. Therefore, we suggest that our system has high potential as a wearable system to monitor human motions in industrial and human system applications.

Quadriceps Electromyographic Activity in Closed and Open Kinetic-Chain Exercises with Hip-Adductor Co-Contraction in Sedentary Women

BACKGROUND

Different closed and open kinetic-chain exercises with hip-adductor co-contraction have different effects on quadriceps activity. The aim of this study was to investigate the difference in quadriceps activity during the squat (SQ) and knee extension (KE) and straight leg raise (SLR) exercises with and without hip adduction in sedentary women.

METHODS

Twenty-eight sedentary women aged 44.5 ± 8.5 years were recruited. They performed three exercises with and without hip adduction. Surface electromyography (sEMG) activity was measured on the rectus femoris (RF), vastus medialis oblique (VMO) and vastus lateralis (VL) muscles. The levels of sEMG activities of the three muscles were compared among the six exercises using a repeated-measures ANOVA.

RESULTS

The findings showed that RF activity was lowest during the SQ alone and highest during the SLR exercise (p < 0.05 to 0.001). The VMO activity was significantly greater in the SQH than in the five types of exercises (p < 0.05 to 0.001), which led to a significant VMO/VL ratio as well. VL activity increased while the squat with hip adduction and knee extension with hip adduction exercise compared with SQ alone.

CONCLUSION

This study indicates that a closed-chain squat with hip co-contraction can produce the VMO and VMO/VL ratio activity, while an open chain of SLR better activates the RF activity. The findings support the understanding of quadriceps activity in different exercises to be an alternative home-based exercise for physical therapy in women facing muscle weakness.

Motor control strategies differ between monoarticular and biarticular quadriceps muscles during bipedal squats

The interplay between biarticular and monoarticular muscles of the knee and hip joints during bipedal squats (SQ_BP ) requires adequate central-nervous control mechanisms to enable smooth and dynamic movements. Here, we investigated motor control between M. vastus medialis (VM), M. vastus lateralis (VL), and M. rectus femoris (RF) in 12 healthy male recreational athletes during SQ_BP with three load levels (50%, 62.5% & 75% of 3-repetition maximum) following a standardized strength training protocol (3 sets of 10 repetitions). To quantify differences in motor control mechanisms in both time and frequency domains, we analyzed (1) muscle covariation via correlation analyses, as well as (2) common neural input via intermuscular coherence (IMC) between RF, VM, and VL. Our results revealed significantly higher gamma IMC between VM-VL compared to RF-VL and RF-VM for both legs. Correlation analyses demonstrated significantly higher correlation coefficients during ascent periods compared to descent periods across all analyzed muscle pairs. However, no load-dependent modulation of motor control could be observed. Our study provides novel evidence that motor control during SQ_BP is characterized by differences in common input between biarticular and monoarticular muscles. Additionally, muscle activation patterns show higher similarity during ascent compared to descent periods. Future research should aim to validate and extend our observations as insights into the underlying control mechanisms offer the possibility for practical implications to optimize training concepts in elite sports and rehabilitation.

Case Study: Intra- and Interpersonal Coherence of Muscle and Brain Activity of Two Coupled Persons during Pushing and Holding Isometric Muscle Action

Inter-brain synchronization is primarily investigated during social interactions but had not been examined during coupled muscle action between two persons until now. It was previously shown that mechanical muscle oscillations can develop coherent behavior between two isometrically interacting persons. This case study investigated if inter-brain synchronization appears thereby, and if differences of inter- and intrapersonal muscle and brain coherence exist regarding two different types of isometric muscle action. Electroencephalography (EEG) and mechanomyography/mechanotendography (MMG/MTG) of right elbow extensors were recorded during six fatiguing trials of two coupled isometrically interacting participants (70% MVIC). One partner performed holding and one pushing isometric muscle action (HIMA/PIMA; tasks changed). The wavelet coherence of all signals (EEG, MMG/MTG, force, ACC) were analyzed intra- and interpersonally. The five longest coherence patches in 8−15 Hz and their weighted frequency were compared between real vs. random pairs and between HIMA vs. PIMA. Real vs. random pairs showed significantly higher coherence for intra-muscle, intra-brain, and inter-muscle-brain activity (p < 0.001 to 0.019). Inter-brain coherence was significantly higher for real vs. random pairs for EEG of right and central areas and for sub-regions of EEG left (p = 0.002 to 0.025). Interpersonal muscle-brain synchronization was significantly higher than intrapersonal one, whereby it was significantly higher for HIMA vs. PIMA. These preliminary findings indicate that inter-brain synchronization can arise during muscular interaction. It is hypothesized both partners merge into one oscillating neuromuscular system. The results reinforce the hypothesis that HIMA is characterized by more complex control strategies than PIMA. The pilot study suggests investigating the topic further to verify these results on a larger sample size. Findings could contribute to the basic understanding of motor control and is relevant for functional diagnostics such as the manual muscle test which is applied in several disciplines, e.g., neurology, physiotherapy.

Muscle oxygenation and time to task failure of submaximal holding and pulling isometric muscle actions and influence of intermittent voluntary muscle twitches

Background

Isometric muscle actions can be performed either by initiating the action, e.g., pulling on an immovable resistance (PIMA), or by reacting to an external load, e.g., holding a weight (HIMA). In the present study, it was mainly examined if these modalities could be differentiated by oxygenation variables as well as by time to task failure (TTF). Furthermore, it was analyzed if variables are changed by intermittent voluntary muscle twitches during weight holding (Twitch). It was assumed that twitches during a weight holding task change the character of the isometric muscle action from reacting (≙ HIMA) to acting (≙ PIMA).

Methods

Twelve subjects (two drop outs) randomly performed two tasks (HIMA vs. PIMA or HIMA vs. Twitch, n = 5 each) with the elbow flexors at 60% of maximal torque maintained until muscle failure with each arm. Local capillary venous oxygen saturation (SvO₂) and relative hemoglobin amount (rHb) were measured by light spectrometry.

Results

Within subjects, no significant differences were found between tasks regarding the behavior of SvO₂ and rHb, the slope and extent of deoxygenation (max. SvO₂ decrease), SvO₂ level at global rHb minimum, and time to SvO₂ steady states. The TTF was significantly longer during Twitch and PIMA (incl. Twitch) compared to HIMA (p = 0.043 and 0.047, respectively). There was no substantial correlation between TTF and maximal deoxygenation independently of the task (r = − 0.13).

Conclusions

HIMA and PIMA seem to have a similar microvascular oxygen and blood supply. The supply might be sufficient, which is expressed by homeostatic steady states of SvO₂ in all trials and increases in rHb in most of the trials. Intermittent voluntary muscle twitches might not serve as a further support but extend the TTF. A changed neuromuscular control is discussed as possible explanation.

Supplementary Information

The online version contains supplementary material available at 10.1186/s13102-022-00447-9.

Muscle Oxygenation Level Might Trigger the Regulation of Capillary Venous Blood Filling during Fatiguing Isometric Muscle Actions

The regulation of oxygen and blood supply during isometric muscle actions is still unclear. Recently, two behavioral types of oxygen saturation (SvO2) and relative hemoglobin amount (rHb) in venous microvessels were described during a fatiguing holding isometric muscle action (HIMA) (type I: nearly parallel behavior of SvO2 and rHb; type II: partly inverse behavior). The study aimed to ascertain an explanation of these two regulative behaviors. Twelve subjects performed one fatiguing HIMA trial with each arm by weight holding at 60% of the maximal voluntary isometric contraction (MVIC) in a 90° elbow flexion. Six subjects additionally executed one fatiguing PIMA trial by pulling on an immovable resistance with 60% of the MVIC with each side and same position. Both regulative types mentioned were found during HIMA (I: n = 7, II: n = 17) and PIMA (I: n = 3, II: n = 9). During the fatiguing measurements, rHb decreased initially and started to increase in type II at an average SvO2-level of 58.75 ± 2.14%. In type I, SvO2 never reached that specific value during loading. This might indicate the existence of a threshold around 59% which seems to trigger the increase in rHb and could explain the two behavioral types. An approach is discussed to meet the apparent incompatibility of an increased capillary blood filling (rHb) despite high intramuscular pressures which were found by other research groups during isometric muscle actions.

Disgusting odours affect the characteristics of the Adaptive Force in contrast to neutral and pleasant odours

The olfactomotor system is especially investigated by examining the sniffing in reaction to olfactory stimuli. The motor output of respiratory-independent muscles was seldomly considered regarding possible influences of smells. The Adaptive Force (AF) characterizes the capability of the neuromuscular system to adapt to external forces in a holding manner and was suggested to be more vulnerable to possible interfering stimuli due to the underlying complex control processes. The aim of this pilot study was to measure the effects of olfactory inputs on the AF of the hip and elbow flexors, respectively. The AF of 10 subjects was examined manually by experienced testers while smelling at sniffing sticks with neutral, pleasant or disgusting odours. The reaction force and the limb position were recorded by a handheld device. The results show, inter alia, a significantly lower maximal isometric AF and a significantly higher AF at the onset of oscillations by perceiving disgusting odours compared to pleasant or neutral odours (p < 0.001). The adaptive holding capacity seems to reflect the functionality of the neuromuscular control, which can be impaired by disgusting olfactory inputs. An undisturbed functioning neuromuscular system appears to be characterized by a proper length tension control and by an earlier onset of mutual oscillations during an external force increase. This highlights the strong connection of olfaction and motor control also regarding respiratory-independent muscles.

Assessment of the Adaptive Force of Elbow Extensors in Healthy Subjects Quantified by a Novel Pneumatically Driven Measurement System with Considerations of Its Quality Criteria

Adaptive Force (AF) reflects the capability of the neuromuscular system to adapt adequately to external forces with the intention of maintaining a position or motion. One specific approach to assessing AF is to measure force and limb position during a pneumatically applied increasing external force. Through this method, the highest (AF_max), the maximal isometric (AFiso_max) and the maximal eccentric Adaptive Force (AFecc_max) can be determined. The main question of the study was whether the AFiso_max is a specific and independent parameter of muscle function compared to other maximal forces. In 13 healthy subjects (9 male and 4 female), the maximal voluntary isometric contraction (pre- and post-MVIC), the three AF parameters and the MVIC with a prior concentric contraction (MVICpri-con) of the elbow extensors were measured 4 times on two days. Arithmetic mean (M) and maximal (Max) torques of all force types were analyzed. Regarding the reliability of the AF parameters between days, the mean changes were 0.31–1.98 Nm (0.61%–5.47%, p = 0.175–0.552), the standard errors of measurements (SEM) were 1.29–5.68 Nm (2.53%–15.70%) and the ICCs(3,1) = 0.896–0.996. M and Max of AFiso_max, AF_max and pre-MVIC correlated highly (r = 0.85–0.98). The M and Max of AFiso_max were significantly lower (6.12–14.93 Nm; p ≤ 0.001–0.009) and more variable between trials (coefficient of variation (CVs) ≥ 21.95%) compared to those of pre-MVIC and AF_max (CVs ≤ 5.4%). The results suggest the novel measuring procedure is suitable to reliably quantify the AF, whereby the presented measurement errors should be taken into consideration. The AFiso_max seems to reflect its own strength capacity and should be detected separately. It is suggested its normalization to the MVIC or AF_max could serve as an indicator of a neuromuscular function.

Paired personal interaction reveals objective differences between pushing and holding isometric muscle action

In sports and movement sciences isometric muscle function is usually measured by pushing against a stable resistance. However, subjectively one can hold or push isometrically. Several investigations suggest a distinction of those forms. The aim of this study was to investigate whether these two forms of isometric muscle action can be distinguished by objective parameters in an interpersonal setting. 20 subjects were grouped in 10 same sex pairs, in which one partner should perform the pushing isometric muscle action (PIMA) and the other partner executed the holding isometric muscle action (HIMA). The partners had contact at the distal forearms via an interface, which included a strain gauge and an acceleration sensor. The mechanical oscillations of the triceps brachii (MMGtri) muscle, its tendon (MTGtri) and the abdominal muscle (MMGobl) were recorded by a piezoelectric-sensor-based measurement system. Each partner performed three 15s (80% MVIC) and two fatiguing trials (90% MVIC) during PIMA and HIMA, respectively. Parameters to compare PIMA and HIMA were the mean frequency, the normalized mean amplitude, the amplitude variation, the power in the frequency range of 8 to 15 Hz, a special power-frequency ratio and the number of task failures during HIMA or PIMA (partner who quit the task). A "HIMA failure" occurred in 85% of trials (p < 0.001). No significant differences between PIMA and HIMA were found for the mean frequency and normalized amplitude. The MMGobl showed significantly higher values of amplitude variation (15s: p = 0.013; fatiguing: p = 0.007) and of power-frequency-ratio (15s: p = 0.040; fatiguing: p = 0.002) during HIMA and a higher power in the range of 8 to 15 Hz during PIMA (15s: p = 0.001; fatiguing: p = 0.011). MMGtri and MTGtri showed no significant differences. Based on the findings it is suggested that a holding and a pushing isometric muscle action can be distinguished objectively, whereby a more complex neural control is assumed for HIMA.

The task dependent differences in electromyography activity of hamstring muscles during leg curls and hip extensions

This study aimed to investigate the influence of the task type on the relative electromyography (EMG) activity of biceps femoris long head (BFlh) to semitendinosus (ST) muscles, and of proximal to distal regions during isometric leg-curl (LC) and hip-extension (HE). Twenty male volunteers performed isometric LC with the knee flexed to 30° (LC30) and 90° (LC90), as well as isometric HE with the knee extended (HE0) and flexed to 90° (HE90), at 40% and 100% maximal voluntary contraction (MVIC). Hip position was neutral in all conditions. EMG activity was recorded from the proximal and distal region of the BFlh and ST muscles. BFlh/ST was calculated from the raw root-mean-square (RMS) amplitudes. The RMS of 40% MVIC was normalized using MVIC data and the proximal/distal (P/D) ratio of normalized EMG (NEMG) was calculated. The BFlh/ST ratio was higher in HE0 than in LC90 during MVIC and 40% MVIC (p<0.05), and was higher in HE90 than in LC90 (p<0.05) during 40% MVIC at the proximal region, whereas no difference was observed between HE0 and LC30. There was no inter-task difference in BFlh/ST ratio in the distal region. Furthermore, the P/D ratio was higher in LC90 than in LC30 and HE0 (p<0.05) in BFlh and ST muscles, and was higher in HE90 than in LC30 and HE0 (p<0.05) in BFlh during 40% MVIC. However, there was no difference in P/D ratio between LC30 and LC90, and HE0 and HE90. This showed that there was no task-dependent difference in the EMG activity of the BFlh muscle relative to the ST muscle between prone hip extension and prone knee flexion when the knee joint was set at an equivalent angle. Similarly, there was no task-dependent difference in the NEMG of the proximal region relative to the distal region in BFlh and ST muscles during 40% MVIC.

Manual Muscle Testing-Force Profiles and Their Reproducibility

The manual muscle test (MMT) is a flexible diagnostic tool, which is used in many disciplines, applied in several ways. The main problem is the subjectivity of the test. The MMT in the version of a "break test" depends on the tester's force rise and the patient's ability to resist the applied force. As a first step, the investigation of the reproducibility of the testers' force profile is required for valid application. The study examined the force profiles of n = 29 testers (n = 9 experiences (Exp), n = 8 little experienced (LitExp), n = 12 beginners (Beg)). The testers performed 10 MMTs according to the test of hip flexors, but against a fixed leg to exclude the patient's reaction. A handheld device recorded the temporal course of the applied force. The results show significant differences between Exp and Beg concerning the starting force (padj = 0.029), the ratio of starting to maximum force (padj = 0.005) and the normalized mean Euclidean distances between the 10 trials (padj = 0.015). The slope is significantly higher in Exp vs. LitExp (p = 0.006) and Beg (p = 0.005). The results also indicate that experienced testers show inter-tester differences and partly even a low intra-tester reproducibility. This highlights the necessity of an objective MMT-assessment. Furthermore, an agreement on a standardized force profile is required. A suggestion for this is given.

A Comparison of Motor Unit Control Strategies between Two Different Isometric Tasks

Background: This study examined the motor unit (MU) control strategies for non-fatiguing isometric elbow flexion tasks at 40% and 70% maximal voluntary isometric contraction. Methods: Nineteen healthy individuals performed two submaximal tasks with similar torque levels: contracting against an immovable object (force task), and maintaining the elbow joint angle against an external load (position task). Surface electromyographic (EMG) signals were collected from the agonist and antagonist muscles. The signals from the agonist were decomposed into individual action potential trains. The linear regression analysis was used to examine the MU recruitment threshold (RT) versus mean firing rates (MFR), and RT versus derecruitment threshold (DT) relationships. Results: Both agonist and antagonist muscles’ EMG amplitudes did not differ between two tasks. The linear slopes of the MU RT versus MFR and RT versus DT relationships during the position task were more negative (p = 0.010) and more positive (p = 0.023), respectively, when compared to the force task. Conclusions: To produce a similar force output, the position task may rely less on the recruitment of relatively high-threshold MUs. Additionally, as the force output decreases, MUs tend to derecruit at a higher force level during the position task.

Scientific Basis for Eccentric Quasi-Isometric Resistance Training: A Narrative Review

Oranchuk, DJ, Storey, AG, Nelson, AR, and Cronin, JB. The scientific basis for eccentric quasi-isometric resistance training: A narrative review. J Strength Cond Res 33(10): 2846-2859, 2019-Eccentric quasi-isometric (EQI) resistance training involves holding a submaximal, yielding isometric contraction until fatigue causes muscle lengthening and then maximally resisting through a range of motion. Practitioners contend that EQI contractions are a powerful tool for the development of several physical qualities important to health and sports performance. In addition, several sports involve regular quasi-isometric contractions for optimal performance. Therefore, the primary objective of this review was to synthesize and critically analyze relevant biological, physiological, and biomechanical research and develop a rationale for the value of EQI training. In addition, this review offers potential practical applications and highlights future areas of research. Although there is a paucity of research investigating EQIs, the literature on responses to traditional contraction types is vast. Based on the relevant literature, EQIs may provide a practical means of increasing total volume, metabolite build-up, and hormonal signaling factors while safely enduring large quantities of mechanical tension with low levels of peak torque. Conversely, EQI contractions likely hold little neuromuscular specificity to high velocity or power movements. Therefore, EQI training seems to be effective for improving musculotendinous morphological and performance variables with low injury risk. Although speculative due to the limited specific literature, available evidence suggests a case for future experimentation.

Recurrent inhibition is higher in eccentric compared to isometric and concentric maximal voluntary contractions

AIM

This study was designed to investigate the influence of muscle contraction type on spinal recurrent inhibition during maximal voluntary contractions (MVC) of the plantar flexor muscles.

METHODS

To that purpose, the paired Hoffmann-reflex (H-reflex) technique permitted to assess changes in recurrent pathway by comparing the modulations of test, reference and conditioning H-reflexes (H', H_ref and H₁ respectively) in the soleus muscle during isometric, concentric and eccentric MVC. Twenty-five subjects participated in an experimental session designed to assess the activity of the recurrent inhibition pathway.

RESULTS

The results indicate that both the electromyographic activity and the amplitude of H₁ normalized to the maximal M-wave (M_max ) were similar regardless of the muscle contraction type while the ratio between H' and H₁ amplitudes was significantly smaller during eccentric compared with isometric and concentric MVC. Furthermore, H_ref and H' amplitudes did not differ significantly during both isometric and concentric MVCs while H' amplitude was significantly lower than H_ref amplitude during eccentric MVC. In addition, the V/M_max ratio was similar for all muscle contraction type and greater H' amplitude was significantly correlated with greater V-wave amplitude regardless of the muscle contraction type.

CONCLUSION

Together, the current results indicate that recurrent inhibition is elevated for the soleus muscle during eccentric compared to isometric and concentric MVC. Data further suggest that the Renshaw cell activity is specifically controlled by the descending neural drive and/or peripheral neural mechanisms during eccentric MVC.

Are there two forms of isometric muscle action? Results of the experimental study support a distinction between a holding and a pushing isometric muscle function

BACKGROUND

In isometric muscle function, there are subjectively two different modes of performance: one can either hold isometrically - thus resist an impacting force - or push isometrically - therefore work against a stable resistance. The purpose of this study is to investigate whether or not two different isometric muscle actions - the holding vs. pushing one (HIMA vs PIMA) - can be distinguished by objective parameters.

METHODS

Ten subjects performed two different measuring modes at 80% of MVC realized by a special pneumatic system. During HIMA the subject had to resist the defined impacting force of the pneumatic system in an isometric position, whereby the force of the cylinder works in direction of elbow flexion against the subject. During PIMA the subject worked isometrically in direction of elbow extension against a stable position of the system. The signals of pressure, force, acceleration and mechanomyography/-tendography (MMG/MTG) of the elbow extensor (MMGtri/MTGtri) and the abdominal muscle (MMGobl) were recorded and evaluated concerning the duration of maintaining the force level (force endurance) and the characteristics of MMG-/MTG-signals. Statistical group differences comparing HIMA vs. PIMA were estimated using SPSS.

RESULTS

Significant differences between HIMA and PIMA were especially apparent regarding the force endurance: During HIMA the subjects showed a decisively shorter time of stable isometric position (19 ± 8 s) in comparison with PIMA (41 ± 24 s; p = .005). In addition, during PIMA the longest isometric plateau amounted to 59.4% of the overall duration time of isometric measuring, during HIMA it lasted 31.6% (p = .000). The frequency of MMG/MTG did not show significant differences. The power in the frequency ranges of 8-15 Hz and 10-29 Hz was significantly higher in the MTGtri performing HIMA compared to PIMA (but not for the MMGs). The amplitude of MMG/MTG did not show any significant difference considering the whole measurement. However, looking only at the last 10% of duration time (exhaustion), the MMGtri showed significantly higher amplitudes during PIMA.

CONCLUSION

The results suggest that under holding isometric conditions muscles exhaust earlier. That means that there are probably two forms of isometric muscle action. We hypothesize two potential reasons for faster yielding during HIMA: (1) earlier metabolic fatigue of the muscle fibers and (2) the complexity of neural control strategies.

Specific modulation of corticospinal and spinal excitabilities during maximal voluntary isometric, shortening and lengthening contractions in synergist muscles

This study was designed to investigate the cortical and spinal mechanisms involved in the modulations of neural activation during lengthening compared with isometric and shortening maximal voluntary contractions (MVCs). Two muscles susceptible to different neural adjustments at the spinal level, the soleus (SOL) and medial gastrocnemius (MG), were compared. Twelve healthy males participated in at least two experimental sessions designed to assess corticospinal and spinal excitabilities. We compared the modulation of motor evoked potentials (MEPs) in response to transcranial magnetic stimulation and Hoffmann reflexes (H-reflexes) during isometric and anisometric MVCs. The H-reflex and MEP responses, recorded during lengthening and shortening MVCs, were compared with those obtained during isometric MVCs. The results indicate that the maximal amplitude of both MEP and H-reflex in the SOL were smaller (P < 0.01) during lengthening MVCs compared with isometric and shortening MVCs but similar (P > 0.05) in MG for all three muscle contraction types. The silent period that follows maximal MEPs was reduced (P < 0.01) during lengthening MVCs in the SOL but not the MG. Similar observations were obtained regardless of the initial length of the MG muscle. Collectively, the current results indicate that the relative contribution of both cortical and spinal mechanisms to the modulation of neural activation differs during lengthening MVCs and between two synergist muscles. The comparison of SOL and MG responses further suggests that the specific modulation of the corticospinal excitability during lengthening MVCs depends mainly on pre- and postsynaptic inhibitory mechanisms acting at the spinal level.