Pretreatment effects on the sorption of Cr(VI) onto surfactant-modified zeolite: Mechanism analysis

Adsorption efficiency of chitosan/clinoptilolite (CS/CZ) composite for effective removal of Cd+2 and Cr+6 ions from wastewater effluents of dairy cattle farms

The wastewater effluent is responsible for the major ecological impact of the dairy sectors. To avoid the negative consequences of heavy metal pollution on the ecosystem, creative, affordable, and efficient treatment methods are now required before the effluent flows into the surrounding area. This study was aimed at assessing the effectiveness of three different adsorbents for Cd+2 and Cr+6 ions from wastewater effluents of dairy farms, including chitosan (CS), clinoptilolite zeolite (CZ), and chitosan/clinoptilolite zeolite (CS/CZ) composite. The adsorption kinetics of the CS/CZ composite were established using the effects of the key variables (pH, agitation speed, adsorbent concentrations, and contact durations). The removal (%) and adsorption capacities, qe (mg/g), were calculated using the data from the adsorption kinetics. Wastewater samples (n = 60) were collected from the wastewater effluents of five farms. Cd+2 and Cr+6 ion concentrations in all collected samples were determined. Following the CS/CZ composite creation, it was characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (X-RD), and Fourier-transform infrared spectrum (FT-IR). The CS/CZ composite had an adsorption capacity of 92.4 and 96.5 mg/g for both Cd+2 and Cr+6 ions at a concentration of 2.0 g/100 ml, respectively, while the CZ adsorption capacities for the two ions were 87.5 mg/g and 61.0 mg/g, respectively, at 4.0 g/100 ml concentration. The CS was achieved at 55.56 mg/g and 33.3 mg/g, respectively, at the same concentration. The efficiency of heavy metal removal was enhanced by increasing adsorbent concentration, agitation speed, and contact duration. Using CS/CZ composite at 2.0 g/100 ml concentration, 180 min of contact time, and 300 rpm agitation speed, the greatest removal efficiencies for Cd+2 and Cr+6 ions (96.43 and 98.75%, respectively) were demonstrated.

Modification of natural zeolites and their applications for heavy metal removal from polluted environments: Challenges, recent advances, and perspectives

In recent decades, environmental pollution has become a significant problem for human health and environmental impact. The high accumulation of heavy metals in waters and soils from different sources was conducted by finding efficient and environmentally friendly treatment methods and materials for their removal. Natural zeolites have found wide-ranging applications in environmental remediation and protection, considering various treatment and modification methods designed to enhance the natural zeolites' adsorptive or ion-exchange capabilities for increased efficiency. This paper briefly consolidates the recent scientific literature related to the main characteristics of natural and modified zeolites, the advantages and limitations of their environmental remediation application, and summarizes the methodologies applied to natural zeolites in order to improve their properties. Their application for removing heavy metals from water systems and soils is also comprehensively discussed. This review highlights the excellent potential of natural zeolites to be used after specific treatment or modification as a sustainable and green material to solve numerous environmental pollution issues.

The potential of zeolite nanocomposites in removing microplastics, ammonia, and trace metals from wastewater and their role in phytoremediation

Nanocomposites are emerging as a new generation of materials that can be used to combat water pollution. Zeolite-based nanocomposites consisting of combinations of metals, metal oxides, carbon materials, and polymers are particularly effective for separating and adsorbing multiple contaminants from water. This review presents the potential of zeolite-based nanocomposites for eliminating a range of toxic organic and inorganic substances, dyes, heavy metals, microplastics, and ammonia from water. The review emphasizes that nanocomposites offer enhanced mechanical, catalytic, adsorptive, and porosity properties necessary for sustainable water purification techniques compared to individual composite materials. The adsorption potential of several zeolite-metal/metal oxide/polymer-based composites for heavy metals, anionic/cationic dyes, microplastics, ammonia, and other organic contaminants ranges between approximately 81 and over 99%. However, zeolite substrates or zeolite-amended soil have limited benefits for hyperaccumulators, which have been utilized for phytoremediation. Further research is needed to evaluate the potential of zeolite-based composites for phytoremediation. Additionally, the development of nanocomposites with enhanced adsorption capacity would be necessary for more effective removal of pollutants.

Effective removal of Cr(VI) in water by bulk-size polyaniline/polyvinyl alcohol/amyloid fibril composite beads

With the rapid expansion of industrial activities, chromium ions are discharged into the environment and cause water and soil pollution of various extents, which seriously endangers the natural ecological environment and human health. In this study, polyaniline/polyvinyl alcohol/amyloid fibril (PANI/PVA/AFL) composite gel beads (PPA) were prepared from polyaniline and amyloid fibrils with HCl as doping acid and PVA as a cross-linking agent. The results showed that PPA was an irregular composite bead with a diameter of 6 mm. The adsorption of Cr(VI) on the PPA gel beads followed the pseudo-second-order kinetics model, suggesting that chemical reactions were the controlling step in the Cr(VI) adsorption process. Though the Redlich-Peterson isotherm model had the best fit for the adsorption data, the isothermal adsorption process can be simplified using the Langmuir model. The maximum adsorption capacity for Cr(VI) in water was 51.5 mg g-1, comparable to or even higher than some PANI-based nanomaterials. Thermodynamic parameters showed that the adsorption process was a spontaneous, endothermic, and entropy-increasing process. Microscopic analysis revealed that the capture of Cr(VI) on PPA was mainly governed by electrostatic attraction, reduction, and complexation reactions. PPA can be used as a kind of effective remediation agent to remove Cr(VI) in water.

Novel efficient capture of hexavalent chromium by polyethyleneimine/amyloid fibrils/polyvinyl alcohol aerogel beads: Functional design, applicability, and mechanisms

The harmful effects of hexavalent chromium (Cr(VI)) on the environment and human health have aroused wide public concern. In this study, bulk spherical aerogel beads (PAP) were synthesized from polyethyleneimine (PEI), protein amyloid fibrils (AFL), and polyvinyl alcohol (PVA) through green technology and its removal of Cr(VI) from wastewater was comprehensively studied. The results showed that although the bulk PAP beads (∼ 5 mm) only had an average pore size of 16.88 nm and a BET surface area of 12 m²/g, its maximum adsorption capacity for Cr(VI) reached 121.44 mg/g (at 298 K). Cr(VI) adsorption onto PAP conformed to pseudo-second-order adsorption kinetics and was endothermic. The adsorption of Cr(VI) decreased stepwise with the increase of solution alkalinity (pH = 2: 91.97%; pH = 10: 0.04%). Importantly, PAP showed high selectivity towards Cr(VI) in mixed heavy metal solutions (Cr(VI) > Pb(II) > Ni(II) > Cu(II) > Cd(II)) and good reusability (removal efficiency > 88% after 5 cycles). PAP had excellent anti-interference ability against FA and HCO₃^- with the overall removal rate exceeding 87% in the presence of 5 - 25 mg/L of these ions. Cations such as Na⁺, Mg²⁺, and other heavy metal ions at high concentrations could promote the removal efficiency of Cr(VI). The removal rates of Cr(VI) and Cr(III) by PAP in a tannery wastewater were 34.4% and 59.3%, respectively. Meanwhile, the removal rates of Cr(VI) in a electroplating wastewater and a contaminated soil leachate reached 84.4∼89.7%, showing high practicability. Mechanism studies revealed that electrostatic attraction, hydrogen bonding, reduction, and complexation were the main reactions for Cr(VI) removal by PAP. In general, the study of PAP provides a new insight into using bulk monolith materials for treating Cr(VI) contaminated wastewater.

Adsorption of heavy metals on natural zeolites: A review

Water pollution has jeopardized human health, and a safe supply of drinking water has been recognized as a worldwide issue. The increase in the accumulation of heavy metals in water from different sources has led to the search for efficient and environmentally friendly treatment methods and materials for their removal. Natural zeolites are promising materials for removing heavy metals from different sources contaminating the water. It is important to know the structure, chemistry, and performance of the removal of heavy metals from water, of the natural zeolites to design water treatment processes. This review focuses on critical analyses of the application of distinct natural zeolites for the adsorption of heavy metals from water, specifically, arsenic (As(III), As(V)), cadmium (Cd(II)), chromium (Cr(III), Cr(VI)), lead (Pb(II)), mercury(Hg(II)) and nickel (Ni(II)). The reported results of heavy-metal removal by natural zeolites are summarized, and the chemical modification of natural zeolites by acid/base/salt reagent, surfactants, and metallic reagents has been analyzed, compared, and described. Furthermore, the adsorption/desorption capacity, systems, operating parameters, isotherms, and kinetics for natural zeolites were described and compared. According to the analysis, clinoptilolite is the most applied natural zeolite to remove heavy metals. It is effective in removing As, Cd, Cr, Pb, Hg, and Ni. Additionally, an interesting fact is a variation between the natural zeolites from different geological origins regarding the sorption properties and capacities for heavy metals suggesting that natural zeolites from different regions of the world are unique.

Combined passivators regulate the heavy metal accumulation and antioxidant response of Brassica chinensis grown in multi-metal contaminated soils

Passivation of heavy metals is one of the most efficient techniques to remediate soil pollution. However, passivators with single component are usually unsatisfactory in the case of multi-metal contaminated soils. To resolve this problem, a series of combined passivators containing different ratios of Fe-Mn ore, Fe powder, zeolite, bentonite, etc. were designed and used to study their effects on the growth, heavy metal accumulation, and the antioxidant response of Chinese cabbage (Brassica chinensis L.) as well as the soil available forms of heavy metals in a copper refinery's multi-metal (As, Cd, Pb, Cu) contaminated yellow-brown soil and an artificially contaminated (As, Cd, Pb, Cu) calcareous alluvial soil. The results showed that compared with the control, the addition of combined passivators significantly promoted cabbage growth, with the biomass increase up to 1.77 and 3.54 times in yellow-brown soil and calcareous alluvial soil, respectively. The activity of antioxidant enzymes (SOD, CAT, POD) and the content of malondialdehyde (MDA) and glutathione (GSH) decreased, while the chlorophyll content increased significantly, as compared with no passivators. In addition, passivator application decreased As, Cd, Pb, and Cu contents in shoots and roots by 34.8%, 45.6%, 34.9%, and 11.1% and 49.2%, 63.8%, 38.6%, and 46.4% in yellow-brown soil and by 29.8%, 27.3%, 26.8%, and 25.5% and 45.8%, 55.2%, 61.8%, and 5.7% in calcareous alluvial soil, respectively. Besides, the content of soil available heavy metals was reduced by 8.0-17.1% in yellow-brown soil and 3.3-19.1% in calcareous alluvial soil after the application of passivators. The results indicated that the combined passivators formulated in this experiment could efficiently reduce the content of the multi-metals in cabbage and relieve the oxidant stress and could be used as a way to remediate multi-metal polluted soils.

Simultaneous immobilization of As and Cd in a mining site soil using HDTMA-modified zeolite

Arsenic (As) and cadmium (Cd) co-contamination has been a typical problem in Chinese agricultural land adjacent to historical metal mining and smelting activities. Remediation of As and Cd in soil has encountered many difficulties owing to the distinct nature of the two metal(loid)s. In this study, we developed a remediation scheme by adding a hexadecyltrimethylammonium (HDTMA)-modified zeolite to a mining site soil and evaluated the immobilization effect. The result of the increased surface zeta potential indicates that the HDTMA modification conferred the zeolite with adsorbability towards As through the cationic surfactant head. The addition of the highest dosage of HDTMA-modified zeolite (10%) to the contaminated soil greatly improved soil organic matter by 1.4 times, partly due to the elevated C loading on the zeolite from HDTMA. Sequential extraction results show that the addition of HDTMA-modified zeolite not only increased the residual fraction of As (by 2.7-5.9%) but also reduced the toxicity-related fraction (by 2.3-2.7%) when compared to the unmodified zeolite and blank treatments. The oxidizable fractions of Cd in the modified zeolite treatment were significantly higher than that in the blank soil. Besides, the exchangeable fractions of Cd were all significantly reduced in the zeolite treatments. Enzyme activity assays show that the HDTMA-modified zeolite treatment could greatly improve soil microbial environment. The physiologically based extraction test (PBET) also proved that the bioavailability of As and Cd was reduced after the modified zeolite treatment.

Different Insights into Silicate Rectorite Modification and Its Role in Removal of Heavy Metal Ions from Wastewater

In the field of water management, the separation of metal contaminants from wastewater is very important and challenging. This study systematically investigated the effect and underlying mechanism of silicate rectorite (REC) on the removal of heavy metal ions (Cr(VI) and Pb(II)) from wastewater. The adsorption and removal capacity of REC was further improved by its novel modification with ferric chloride hexahydrate. Compared to natural REC, the modified rectorite (Fe-REC) showed comparatively superior adsorption efficiency for both Cr(VI) and Pb(II) due to the chemisorption of Fe3+ on the REC surface as its oxidation state (Fe–O, Fe–OH, Fe–OOH). Adsorption on Cr(VI) attributed to the reaction between iron hydroxy complexes (FeOH2+, Fe(OH)2+ and Fe(OH)3(aq)) and Cr(VI) species (HCrO4− and CrO42−) in the aqueous solution. This reaction was perfectly consistent with the binding energy shifts in O 1s and Fe 2p species, as reflected by XPS analysis. While, the existence of –Al–OH and –Si–OH in silicate REC slurry reacted with PbOH+ colloids produced from lead ions hydrolysis to promote Pb(II) adsorption. Zeta potential after modification and removal occurred to shift positively or negatively to testify the adsorption of Fe3+ and heavy metal ions. Freundlich and Langmuir isotherms conformed adsorption process for Cr(VI) and Pb(II), respectively.

A review on recent developments in the adsorption of surfactants from wastewater

The pollution of the world's water resources is a growing issue which requires remediation. Surfactants used in many domestic and industrial applications are one of the emerging contaminants that require immediate attention. Treating water contaminated with surfactants using adsorption provides better performance when compared to other techniques. A variety of materials have been developed for adsorbing surfactants. Activated carbon is the most suitable adsorbent for removing surfactants but is expensive to synthesize and difficult to regenerate. Therefore, a variety of new adsorbents such as zeolites, nanomaterials, resins, biomaterials and clays have been developed as alternatives. The developed adsorbents are promising but considerable research is still required to develop highly efficient, economical, environment friendly and sustainable adsorbents to replace activated carbon. This paper critically reviews the characteristics of adsorbents, the performance of adsorbents, kinetics, isotherms and thermodynamics, mechanisms of adsorption, regeneration of adsorbents and future perspectives in the adsorption of surfactants. Developing novel adsorbents, testing adsorbents in real wastewaters and recycling the adsorbents are required in future studies in the removal of surfactants.

Disinfection and removal performance for Escherichia coli, toxic heavy metals and arsenic by wood vinegar-modified zeolite

Zeolite has traditionally been used to remediate wastewater and soil. The present study shows a new method for natural zeolite (NZ) modification with wood vinegar (WV). The optimal conditions for NZ modification with WV were determined, and the adsorption capacities towards lead (Pb), cadmium (Cd) and arsenic (As), antimicrobial activities against Escherichia coli, heavy metal(loid) fraction and characterizations of selected modified zeolites (MZs) were also investigated. The results indicate that 50-fold dilution of WV, 5 g of NZ dosage, 105 °C of drying temperature, 4 h and 95 °C of water bath are preferred for NZ modification with WV. The WV+NaOH-MZ exhibited the best performance in heavy metal removal and the most powerful antimicrobial activity among all the zeolites. The sequence of WV+NaOH-MZ for the maximum single metal(loid) adsorption capacities was Pb (48.67 mg/g) >Cd (23.67 mg/g) > As (0.024 mg/g). The WV+NaOH and WV modifications also can increase the stabilities of heavy metals in the MZs. The residual fractions of single Pb and Cd in WV+NaOH-MZ and WV-MZ were 50%, 55%, 34% and 30%, respectively. The pore size of WV+NaOH-MZ (11.73 nm) was bigger than that of NZ or WV-MZ. Additionally, the proportion of clinoptilolite in WV+NaOH-MZ was also higher than other zeolites. The surfaces of WV+alkali-MZs were rougher than that of NZ. Considering the low cost and environmental risk of WV, this work provides some useful information for management of agricultural and industrial residues, environment and food safety.

Zeolite as a Potential Medium for Ammonium Recovery and Second Cheese Whey Treatment

The efficiency of natural zeolite to remove ammonium from artificial wastewater (ammonium aqueous solutions) and to treat second cheese whey was examined, aiming to recover nitrogen nutrients that can be used for further applications, such as slow-release fertilizers. Sorption experiments were performed using artificial wastewater and zeolite of different granulometries (i.e., 0.71–1.0, 1.8–2.0, 2.0–2.8, 2.8–4.0, and 4.0–5.0 mm). The granulometry of the zeolite had no significant effect on its ability to absorb ammonium. Nevertheless, smaller particles (0.71–1.0 mm) exhibited quicker NH4+-N adsorption rates of up to 93.0% in the first 10 min. Maximum ammonium removal efficiency by the zeolite was achieved at ammonium concentrations ranging from 10 to 80 mg/L. Kinetic experiments revealed that chemisorption is the mechanism behind the adsorption process of ammonium on zeolite, while the Freundlich isotherm model fitted the experimental data well. Column sorption experiments under batch operating mode were performed using artificial wastewater and second cheese whey. Column experiments with artificial wastewater showed high NH4+-N removal rates (over 96% in the first 120 min) for all granulometries and initial NH4+-N concentrations tested (200 and 5000 mg/L). Column experiments with second cheese whey revealed that natural zeolite can remove significant organic loads (up to 40%, 14.53 mg COD/g of zeolite) and NH4+-N (about 99%). For PO43−-P, the zeolite appeared to saturate after day 1 of the experiments at a removal capacity of 0.15 mg P/g of zeolite. Desorption experiments with water resulted in low NH4+-N and PO43−-P desorption rates indicating that the zeolite could be used as a substrate for slow nitrogen release in soils.

Effects and mechanisms of anionic and nonionic surfactants on biochar removal of chromium

This work found that the removal of chromium by a straw-derived biochar was significantly promoted or inhibited by various surfactants. For example, the anionic surfactant sodium dodecyl benzene sulfonate (SDBS) inhibited the removal of Cr(VI) by the biochar but significantly promoted the removal of Cr(III) by the biochar. The nonionic surfactant Triton X-100 (TX-100) promoted the removal of Cr(VI) at low concentrations (< 100 mg L^-1) but inhibited the removal at high concentrations. Different mechanisms were found for the two surfactants. As an anionic surfactant, surface-sorbed SDBS changed the surface functional groups of the biochar, making the biochar negative charged and changing the sorption ability of the biochar. For the nonionic TX-100, monomers and micelles in the aqueous phase had a major influence on the sorption of chromium due to the impact on the interfacial tension between the biochar and the solution phase as well as the solution pH. The results suggest that when biochar is used to treat heavy metal wastewater containing coexisting surfactants, the type and concentration of surfactants must be considered as important factors. Under certain surfactant conditions, biochar will enable the simultaneous and efficient removal of heavy metals and surfactants.

Preparation and Cr(VI) removal performance of corncob activated carbon

Corncob activated carbon (CCAC) was prepared by a H₃PO₄ activation method. The optimum conditions for the preparation of CCAC were determined by orthogonal experiments. The effects of pH, reaction time, CCAC dosage, and hexavalent chromium (Cr(VI)) concentrations on Cr(VI) removal by CCAC were studied. Corn straw activated carbon (CSAC) was also prepared using the optimum preparation conditions determined for CCAC. The properties of samples were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) analysis, scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS). The results showed that the optimum preparation conditions for CCAC were as follows: a mass of corncob of 10 g; a mass ratio of corncob to H₃PO₄ of 1:2; a 5% H₃BO₃ content of 10 mL; an impregnation time of 45 min; a carbonization temperature of 500 °C. The optimum conditions for the removal of Cr(VI) were as follows: pH < 9; temperature, 308 K; rotation speed, 150 r min^-1; reaction time, 60 min; CCAC dosage, 1 g L^-1. The Cr(VI) removal rate was above 98%, and the maximum adsorption capacity of CCAC was 9.985 mg g^-1. The concentration of residual Cr(VI) in water was less than 0.05 mg L^-1. FTIR showed that the surfaces of the samples had more oxygen-containing functional groups, which promoted the adsorption. XRD showed that CCAC and CSAC had similar peaks and that these peaks promoted the adsorption of Cr(VI). BET indicated that the number of pores in the samples followed the order CCAC > CSAC > CAC. SEM showed that the CCAC surface had a more porous structure, which enhanced adsorption. EDS showed that the C contents of CCAC and CSAC were much higher than that of CAC. Cr(VI) adsorption on CCAC followed quasi-second-order kinetics and was in accordance with a Langmuir adsorption isotherm, with monolayer adsorption. The adsorption reaction was endothermic, where higher temperatures increased the degree of spontaneous reaction.

Preparation and application of modified zeolites as adsorbents in wastewater treatment

Natural zeolite has been recognized as a useful adsorbent for wastewater treatment for removing cations. Natural zeolite is a kind of porous material with large specific surface area but limited adsorption capacity. In recent years, emphasis has been given to prepare the surface modified zeolite using various procedures to enhance the potential of zeolite for pollutants. Modification treatment for zeolite can greatly change surface chemistry and pore structure. The article describes various modification methods of zeolite, and introduces the removal mechanisms of common pollutants such as ammonium, phosphorus and heavy metals. In addition, this review paper intends to present feasibility of applying modified zeolite to constructed wetlands which will be beneficial to achieve higher removal effect.

Magnetic Schiff's base sorbent based on shrimp peels wastes for consummate sorption of chromate

Magnetic Schiff's base chitosan composite has been prepared starting from shrimp peels as a raw material. Chitosan extraction involved three main stages as preconditioning, demineralization deproteinization and deacetylation. Chitosan modification process took place through the reaction between chitosan and polymeric Schiff's base of thiourea/glutaraldehyde in the presence of magnetite. The synthetic hybrid composite was characterized by Fourier transform infrared spectroscopy and scanning electron microscopy-energy dispersive X-ray analyses and tested as sorbent for Cr(VI) recovery from aqueous solution. The performance of the sorbent was systematically evaluated by batch sorption experiments, followed by equilibrium and kinetic studies with different mathematical models. The isotherm study demonstrate that the sorbent achieved 99.1% (sorption capacity; 252.45 mg g^-1) removal efficiency in Cr(VI) solution with concentrations up to 400 mg/L. Experimental data gave better mathematical fitting towards pseudo-second-order kinetic model and Langmuir isotherm model. The distribution coefficient was obtained at different temperatures and the thermodynamic parameters have been calculated: the sorption is endothermic, spontaneous and contributes to increase the randomness of the system. The sorbent could be recycled for three cycles of sorption/desorption.