Degradation of chlorinated paraben by integrated irradiation and biological treatment process

Removal of ammonia and phenol from saline chemical wastewater by ionizing radiation: Performance, mechanism and toxicity

Saline chemical wastewater containing ammonia and toxic organic pollutants has been a challenge for conventional wastewater treatment technology. Advanced treatment is thus required. In this study, the removal of ammonia and phenol in saline chemical wastewater by radiation was investigated in detail. The results showed that chloridion in saline chemical wastewater could be transferred to •Cl and •ClO by radiation, which promoted ammonia oxidation, but inhibited phenol degradation. Solution pH affected the types of reactive species, which further affected the removal of ammonia and phenol. When ammonia and phenol co-existed in saline chemical wastewater, the removal efficiency of ammonia was depressed compared to that in the absence of phenol. Similarly, the phenol removal efficiency was also depressed in the presence of ammonia when the solution pH was lower than 7.0. Interestingly, the phenol removal efficiency was improved with increase of either chloridion concentration (2-8 g/L) or dose (2-5 kGy), which was attributed to the formation of intermediate nitrogen-centered radicals that can react with phenol. In addition, the intermediate products of phenol degradation under different conditions were identified. The acute toxicity of saline chemical wastewater after radiation treatment was evaluated. The results of this study could provide an insight into the removal of ammonia and phenol from saline chemical wastewater by radiation technology.

Simultaneous biological removal of nitrogen and phosphorus from secondary effluent of wastewater treatment plants by advanced treatment: A review

With the advancement of water ecological protection and water control standard, it is the general trend to upgrade the wastewater treatment plants (WWTPs). The simultaneous removal of nitrogen and phosphorus is the key to improve the water quality of secondary effluent of WWTPs to prevent the eutrophication. Therefore, it is urgent to develop the applicable technologies for simultaneous biological removal of nitrogen and phosphorus from secondary effluent. In this review, the composition of secondary effluent from municipal WWTPs were briefly introduced firstly, then the three main treatment processes for simultaneous nitrogen and phosphorus removal, i.e., the enhanced denitrifying phosphorus removal filter, the pyrite-based autotrophic denitrification and the microalgae biological treatment system were summarized, their performances and mechanisms were analyzed. The influencing factors and microbial community structure were discussed. The advanced removal of nitrogen and phosphorus by different technologies were also compared and summarized in terms of performance, operational characteristics, disadvantage and cost. Finally, the challenges and future prospects of simultaneous removal of nitrogen and phosphorus technologies for secondary effluent were proposed. This review will deepen to understand the principles and applications of the advanced removal of nitrogen and phosphorus and provide some valuable information for upgrading the treatment process of WWTPs.

Parabens in aerobic granular sludge systems: Impacts on granulation and insights into removal mechanisms

This work assessed the impact of methylparaben, ethylparaben, propylparaben, and butylparaben (200 μg L^-1 each) on the granulation process as well as on the organic matter and nutrient removal of an aerobic granular sludge (AGS) system (6-h cycle). Additionally, some insights into the main paraben removal mechanisms were provided. In the presence of parabens, aerobic granules with good settleability, but with fragile and irregular structure, were grown. No significant effect of parabens on organic matter (>90%) and nitrogen (~70%) removal was evidenced. On the other hand, phosphorus removal was slightly impaired, although high removal efficiencies (~70%) were reached. High paraben removal efficiencies were achieved (>85%) in the AGS system, with methylparaben being the most recalcitrant compound. Concerning the removal mechanisms, biotransformation was the main mechanism in the removal of all parabens (85.5% for methylparaben and 100% for the others), whereas, apparently, adsorption played a role only in the removal of methylparaben. In addition, this compound was also suggested as a probable intermediate of the degradation of the larger alkyl-chain parabens. Lastly, regarding the microbial community, with the exception of Mycobacterium, the reactors shared the same genera, which may explain their comparable operational performances. Additionally, some genera that developed more in the presence of parabens may be related to their degradation. Therefore, although antimicrobial agents such as parabens compromised the granule structure, AGS system maintained a good operational performance and showed to be very efficient in paraben removal.

Strategy of combining radiation with ferrate oxidation for enhancing the degradation and mineralization of carbamazepine

In this study, the strategy of combining radiation with ferrate oxidation was proposed to decrease the adsorbed dosse and enhance the mineralization of carbamazepine in aqueous solution. Compared to single radiation (800 Gy), the combined process of ferrate pretreatment and radiation required lower dose (600 Gy) for totally removing carbamazepine. During the combined process, the removal efficiency of total organic carbon (TOC) reached 22.2%. However, the removal efficiencies of carbamazepine and TOC decreased when ferrate and radiation were used simultaneously, indicating that the addition of ferrate during the radiation process had negative effect on the removal of carbamazepine. In contrast, the radiation followed by ferrate oxidation presented the best performance in decreasing the absorbed dose and enhancing the mineralization of carbamazepine. Carbamazepine could be completely removed under all conditions. TOC removal efficiency reached 18.3%, 31.3%, 52.9% and 60.6%, respectively, at the adsorbed dose of 100, 300, 600 and 800 Gy when 0.4 mM ferrate was adopted. The enhanced TOC removal could be due to the enhanced oxidation capacity of ferrate caused by the pH decrease at the end of radiation and the further oxidation of intermediate products formed during the radiation process by ferrate. Seven degradation products were identified in total, and thus the degradation pathway of carbamazepine was proposed. This study provides a possible way to decrease the adsorbed dose and enhance the mineralization of carbamazepine by radiation.

Multi-generational effects and variations of stress response by hexabromocyclododecane (HBCD) exposure in the nematode Caenorhabditis elegans

In order to understand multi-generational effects and changes of stress response by hexabromocyclododecane (HBCD) exposure, the animal model Caenorhabditis elegans was chosen for toxicity study. Multiple endpoints, including the physiological levels (growth, reproduction, and locomotion behaviors), stress-related gene expressions, reactive oxygen species (ROS) production and degree of cell apoptosis, were evaluated on exposed nematodes and their progeny. Prolonged exposure to HBCD at concentrations of 2 nM-200 nM caused adverse physiological effects in the parental generation (F0), and these effects were also observed in the offspring under HBCD-free conditions (F1). HBCD-induced toxicities could be transferred from parent to offspring. The integrated gene expressions profiles showed that exposure to HBCD at concentrations of 20-200 nM resulted in obvious changes in stress-related gene expressions, which were more increased in F0 generation than in F1 generation. The increased expressions were pronounced in several genes related to oxidative stress and cell apoptosis, e.g., hsp-16.2, hsp-16.48, sod-1, sod-3 and cep-1 genes. Exposure to 200 nM of HBCD could significantly increase ROS production and degree of cell apoptosis in the F0 and F1 generations. Therefore, it was speculated that HBCD exposure induced oxidative stress and cell apoptosis, which resulted in the adverse physiological effects. This finding is helpful for understanding the multi-generational effects and evaluating the potential risk of HBCD.

The occurrence, distribution and degradation of antibiotics by ionizing radiation: An overview

Antibiotics have been extensively applied, making them ubiquitous in aquatic environment. As emerging contaminants, the occurrence and distribution of antibiotics in the environment has received increasing attention due to their potential adverse effects on human health and ecosystem. However, antibiotics cannot be effectively removed in conventional biological treatment processes, and their natural biodegradation is also ineffective. In this review, the occurrence and distribution of antibiotics in aquatic environments, including surface water, wastewater and effluent of wastewater treatment plants, were analyzed and summarized. Recent progress of antibiotics degradation by ionizing radiation was reviewed. The various influencing factors, such as absorbed dose, initial concentration, inorganic anions and organic matters, on the removal efficiency of antibiotics were introduced and discussed. To improve their removal efficiency, several advanced oxidation processes (AOPs) such as H₂O₂, Fe²⁺, Fe²⁺/H₂O₂, as well as biological treatment processes, are combined with ionizing radiation. Some suggestions for future studies of antibiotics degradation by ionizing radiation were proposed. Ionizing radiation may be a promising technology for removal of antibiotics from water and wastewater.

Fabrication of β-cyclodextrin modified mesostructured silica coated multi-walled carbon nanotubes composites and application for paraben removal

In this work, the novel β-cyclodextrin modified mesostructured silica coated multi-walled carbon nanotubes (MWCNTs) composites were synthesized and applied for the removal of parabens in aqueous solution. The prepared MWCNTs/SiO₂/β-CD composites were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy and thermogravimetric analysis. The effects of the amount of adsorbent, pH and elution solvents on the removal efficiency of parabens from water solutions were investigated. Under the optimized conditions, over 95% removal efficiency was achieved by using 40 mg of MWCNTs/SiO₂/β-CD adsorbents to absorb the parabens from 60 mL of 0.5 μg/mL parabens solutions. The solution pH in the range from 5 to 9 has no influence on the removal efficiency and the parabens sorption capacity of the prepared adsorbents were around 0.75 μg/mg. Furthermore, the stability and reusability studies demonstrated that the prepared MWCNTs/SiO₂/β-CD composites are cost-effective adsorbents for the removal of parabens from water with high regeneration efficiency. The composites fabricated in this study could become an attractive candidate for water purification.