Simultaneous removal of Cd (II) and p-cresol from wastewater by micellar-enhanced ultrafiltration using rhamnolipid: Flux decline, adsorption kinetics and isotherm studies

Efficient removal of heavy metals in water utilizing facile cross-link conjugated linoleic acid micelles

Micellar-enhanced ultrafiltration (MEUF) technology is an effective method to treat low-concentration heavy metal wastewater. However, the leakage of surfactants in the ultrafiltration (UF) process will inevitably cause secondary pollution. In this study, a biosurfactant of conjugated linoleic acid (CLA) with conjugated double bonds was selected to bind its micelles by simple thermal crosslinking to obtain morphologically stable stearic acid (SA) nanoparticles. The pure SA nanoparticles were obtained by repeated dialysis. The stability of the SA nanoparticles was verified by comparing the particle size distribution and solubility of the materials before and after crosslinking at different pH levels. The effectiveness of SA nanoparticle-enhanced UF in removing heavy metals was verified by exploring the adsorption performance of SA nanoparticles. The dialysis device was used to simplify the UF device, wherein SA nanoparticles were assessed as adsorbents for the elimination of Cu2+, Pb2+, and Cd2+ ions from aqueous solutions under diverse process parameters, including pH, contact time, metal ion concentration, and coexisting ions. The findings indicate that the SA nanoparticles have no evidence of secondary contamination in UF and exhibit compatibility with a broad pH range and coexisting ions. The maximum adsorption capacities for Cu2+, Pb2+, and Cd2+ were determined to be 152.77, 403.56, and 271.46 mg/g, respectively.

Micellar and solubilizing properties of rhamnolipids

We studied the micellar and solubilizing properties of aqueous solutions of unfractionated rhamnolipids produced by Pseudomonas aeruginosa. We used nuclear magnetic resonance (NMR) diffusometry, dynamic light scattering, and conductometry to measure the critical micelle concentration (CMC) of rhamnolipid solutions and determined the effective hydrodynamic radii of rhamnolipid monomers and micelles. Based on selective measurements of the self-diffusion coefficients of molecules, performed by NMR diffusometry, the solubilizing properties of rhamnolipids were studied depending on their concentration in solution; aromatic hydrocarbons, benzene, toluene, ethylbenzene, and para-xylene were taken as solubilizates. On the basis of the measurement results, we estimated the distribution coefficient of the solubilizate between the micellar (solubilized) and free (in the aqueous phase) states and the solubilizing capacity of rhamnolipid micelles.

Removal of Nutrients from Water Using Biosurfactant Micellar-Enhanced Ultrafiltration

The removal of NH₄⁺, NO₃^-, and NH₃^- from wastewater can be difficult and expensive. Through physical, chemical, and biological processes, metals and nutrients can be extracted from wastewater. Very few scientific investigations have employed surfactants with high biodegradability, low toxicity, and suitability for ion removal from wastewater at different pH and salinity levels. This research employed a highly biodegradable biosurfactant generated from yeast (sophorolipid) through micellar-enhanced ultrafiltration (MEUF). MEUF improves nutrient removal efficiency and reduces costs by using less pressure than reverse osmosis (RO) and nanofiltration (NF). The biosurfactant can be recovered after the removal of nutrient- and ion-containing micelles from the filtration membrane. During the experiment, numerous variables, including temperature, pH, biosurfactant concentration, pollutant ions, etc., were evaluated. The highest amount of PO₄^3- was eliminated at a pH of 6.0, which was reported at 94.9%. Maximum NO₃^- removal occurred at 45.0 °C (96.9%), while maximum NH₄⁺ removal occurred at 25.0 mg/L (94.5%). Increasing TMP to 200 kPa produced the maximum membrane flow of 226 L/h/m². The concentrations of the contaminating ion and sophorolipid were insignificant in the permeate, demonstrating the high potential of this approach.

Molecularly Imprinted Magnetic Nanocomposite Based on Carboxymethyl Dextrin for Removal of Ciprofloxacin Antibiotic from Contaminated Water

Broad-spectrum antibiotics from the fluoroquinolone family have emerged as prominent water contaminants, among other pharmaceutical pollutants. In the present study, an antibacterial magnetic molecularly imprinted polymer (MMIP) composite was successfully fabricated using carboxy methyl dextrin grafted to poly(aniline-co-meta-phenylenediamine) in the presence of Fe3O4/CuO nanoparticles and ciprofloxacin antibiotic. The characteristics of obtained materials were investigated using FTIR, XRD, VSM, TGA, EDX, FE-SEM, zeta potential, and BETanalyses. Afterward, the MMIP's antibacterial activity and adsorption effectiveness for removing ciprofloxacin from aqueous solutions were explored. The results of the antibacterial tests showed that MMIP had an antibacterial effect against Escherichia coli, a Gram-negative pathogen (16 mm), and Staphylococcus aureus, a Gram-positive pathogen (22 mm). Adsorption efficacy was evaluated under a variety of experimental conditions, including solution pH, adsorbent dosage, contact time, and initial concentration. The maximum adsorption capacity (Qmax) of the MMIP for ciprofloxacin was determined to be 1111.1 mg/g using 3 mg of MMIP, with an initial concentration of 400 mg/L of ciprofloxacin at pH 7, within 15 min, and agitated at 25 °C, and the experimental adsorption results were well-described by the Freundlich isotherm model. The adsorption kinetic data were well represented by the pseudo-second-order model. Electrostatic interaction, cation exchange, π-π interactions, and hydrogen bonding were mostly able to adsorb the majority of the ciprofloxacin onto the MMIP. Adsorption-desorption experiments revealed that the MMIP could be retrieved and reused with no noticeable reduction in adsorption efficacy after three consecutive cycles.

MEUF for removal and recovery of valuable organic components present in effluents: A process intensified technology

In recent years, the domain of the research space in novel separation process has been led by membrane systems as a panacea providing multifarious benefits of high separation efficiency, elimination of extreme process conditions, sustainability, and environment friendliness coupled with high operational flexibility. In this niche area, often, ultrafiltration is touted as a robust separation technique due to its high separation efficiency, membrane stability, and lower operating costs. The only drawback of relatively large pore size can be overcome by combining surfactant addition, leading to development of integrated processes termed as Micellar Enhanced Ultrafiltration. MEUF processes isolate and selectively separate valuable organics present in effluent streams. The process characteristics fit the bill as a typified example for process intensification Technology interventions for recycling of surfactants can enhance the cost-competitiveness of the process. This has the potential to develop into a broad-spectrum effluent treatment option with a change of surfactants for target contaminants. Here, in this review, we attempt to critically examine the unique features of this technology, development of spin-offs with wide-ranging applications. Specifically applications in removal of hazardous, and persistent components like dissolved organics have been critically studied. The focus was to highlight the crux of the novel technologies highlighting the efficacy and the underlying concept of process intensification. PRACTITIONER POINTS: Role of MEUF as a sustainable process intensifying separation technique for removal and recovery of organics. Novel process development using MEUF. Comparative performance analysis to assess efficacy. Discussions on future integrative process development. Sustainability aspect of MEUF with possibility of byproduct recovery.

Efficient remediation of chlorpyrifos pesticide from contaminated water by superparamagnetic adsorbent based on Arabic gum-grafted-polyamidoxime

A novel organic/inorganic biosorbent hydrogel nanocomposite based on Arabic Gum-grafted-polyamidoxime and CuFe₂O₄ magnetic nanoparticles (AG-g-PAO/CuFe₂O₄) was prepared in three steps. The prepared hydrogel nanocomposite was well characterized using Fourier transform infrared (FT-IR), energy-dispersive X-ray analysis (EDX), scanning electron microscopy (SEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), CHN, zeta potential, and Brunauer-Emmett-Teller (BET) analyses. The adsorption efficiency of the AG-g-PAO/CuFe₂O₄ for removing an organophosphorus pesticide (OPP) (chlorpyrifos) from aqueous solutions was studied. Effect of different experimental conditions such as the pH of the solution, adsorbent dosage, contact time, initial concentration on adsorption efficiency was evaluated. The experimental adsorption data described well by the Langmuir isotherm model and the maximum adsorption capacity (Q_max) of the prepared biosorbent for chlorpyrifos was found 769.23 mg/g. The adsorption kinetic data were well fitted by the pseudo-second-order model. It was suggested that the chlorpyrifos was adsorbed onto AG-g-PAO/CuFe₂O₄ hydrogel biosorbent mainly through electrostatic interaction and hydrogen bonding. The result of adsorption-desorption experiments revealed that the AG-g-PAO/CuFe₂O₄ can be excellently regenerated and reused after three sequential runs without a considerable decline in its adsorption performance.

Simultaneous decontamination of multi-pollutants: A promising approach for water remediation

Water remediation techniques have been extensively investigated due to the increasing threats of soluble pollutants posed on the human health, ecology and sustainability. Confronted with the complex composition matrix of wastewater, the simultaneous elimination of coexisting multi-pollutants remains a great challenge due to their different physicochemical properties. By integrating multi-contaminants elimination processes into one unit operation, simultaneous decontamination attracted more and more attention under the consideration of versatile applications and economical benefits. In this review, the state-of-art simultaneous decontamination methods were systematically summarized as chemical precipitation, adsorption, photocatalysis, oxidation-reduction, biological removal and membrane filtration. Their applications, mechanisms, mutual interactions, sustainability and recyclability were outlined and discussed in detail. Finally, the prospects and opportunities for future research were proposed for further development of simultaneous decontamination. This work could provide guidelines for the design and fabrication of well-organized simultaneous decontaminating system.

Simultaneous photocatalytic reduction of hexavalent chromium and oxidation of p-cresol over AgO decorated on fibrous silica zirconia

The co-existence of heavy metals and organic compounds including Cr(VI) and p-cresol (pC) in water environment becoming a challenge in the treatment processes. Herein, the synchronous photocatalytic reduction of Cr(VI) and oxidation of pC by silver oxide decorated on fibrous silica zirconia (AgO/FSZr) was reported. In this study, the catalysts were successfully developed using microemulsion and electrochemical techniques with various AgO loading (1, 5 and 10 wt%) and presented as 1, 5 and 10-AgO/FSZr. Catalytic activity was tested towards simultaneous photoredox of hexavalent chromium and p-cresol (Cr(VI)/pC) and was ranked as followed: 5-AgO/FSZr (96/78%) > 10-AgO/FSZr (87/61%) > 1-AgO/FSZr (47/24%) > FSZr (34/20%). The highest photocatalytic activity of 5-AgO/FSZr was established due to the strong interaction between FSZr and AgO and the lowest band gap energy, which resulted in less electron-hole recombination and further enhanced the photoredox activity. Cr(VI) ions act as a bridge between the positive charge of catalyst and cationic pC in pH 1 solution which can improve the photocatalytic reduction and oxidation of Cr(VI) and pC, respectively. The scavenger experiments further confirmed that the photogenerated electrons (e^-) act as the main species for Cr(VI) to be reduced to Cr(III) while holes (h⁺) and hydroxyl radicals are domain for photooxidation of pC. The 5-AgO/FSZr was stable after 5 cycles of reaction, suggesting its potential for removal of Cr(VI) and pC simultaneously in the chemical industries.

Solubilization and separation of o-toluidine and tricyclazole in sodium dodecyl sulfate micelles in micellar enhanced ultrafiltration

The solubilization laws of pollutants in micelles and their separation efficiency are very important in the successfully efficient application of micellar enhanced ultrafiltration (MEUF). The solubilization behavior of o-toluidine (OT) and tricyclazole (TC) into sodium dodecyl sulfate (SDS) micelles in MEUF was studied using nonlinear equation sets for concentration analysis, which resolved the issue on the overlap of absorption spectra of multicomponent compounds restricting the application of conventional ultraviolet (UV) spectroscopic method. The solubilization isotherms for both pollutants could be best explained by the Langmuir-Freudlich model (R²>0.99) followed by the modes of Langmuir and Freudlich, inferring the complexity of solubilization mechanism and solubilization advantage of monolayer over multilayer. The calculated thermodynamic parameters (ΔG⁰, ΔH⁰ and ΔS⁰) indicated that this process was endothermic and spontaneous. The solubilization of OT and TC well followed the pseudo second-order and pseudo first-order kinetics, respectively. The separation and recovery of SDS solubilizing these two pollutants were also investigated through lowering solution temperature to 2 °C followed by centrifugation. The best recovery rate of about 66% for SDS was achieved containing 10 and 5% of each initial amount of OT and TC, respectively, at near-neutral solution pH value. The recovery of SDS could decrease to some extent under alkaline and acidic conditions.

Pressure-Driven Membrane Process: A Review of Advanced Technique for Heavy Metals Remediation

Pressure-driven processes have come a long way since they were introduced. These processes, namely Ultra-Filtration (UF), Nano-Filtration (NF), and Reverse-Osmosis (RO), aim to enhance the efficiency of wastewater treatment, thereby aiming at a cleaner production. Membranes may be polymeric, ceramic, metallic, or organo-mineral, and the filtration techniques differ in pore size from dense to porous membrane. The applied pressure varies according to the method used. These are being utilized in many exciting applications in, for example, the food industry, the pharmaceutical industry, and wastewater treatment. This paper attempts to comprehensively review the principle behind the different pressure-driven membrane technologies and their use in the removal of heavy metals from wastewater. The transport mechanism has been elaborated, which helps in the predictive modeling of the membrane system. Fouling of the membrane is perhaps the only barrier to the emergence of membrane technology and its full acceptance. However, with the use of innovative techniques of fabrication, this can be overcome. This review is concluded with perspective recommendations that can be incorporated by researchers worldwide as a new problem statement for their work.

Separation and concentration of o-toluidine and tricyclazole from water with micellar enhanced ultrafiltration based on sodium dodecyl sulfate surfactant

Micellar enhanced ultrafiltration (MEUF) of o-toluidine and tricyclazole in aqueous stream using polyethersulfone (PES) hollow-fibre membrane of 6 kDa molecule weight cut-off (MWCO) and sodium dodecyl sulfate (SDS) as anionic surfactant was studied. It was found that the concentration ratio and adsorption ratio were better for the determination of the optimal pollutant or surfactant concentration than the rejection rate. The excessive dosage of surfactant had only limited effect on the separation and concentration of o-toluidine and tricyclazole but could further decrease the permeate flux. The transmembrane pressure had a significantly positive effect on the permeate flux and recovery ratio. o-Toluidine was significantly separated and concentrated by lowering the solution pH, while tricyclazole reached the best treatment efficiency in near-neutral pH condition. The sodium salts (i.e. Na₂SO₄, NaCl and Na₂CO₃) could lead to the increase in the adsorption ratio of SDS. However, Na₂CO₃ could result in the decrease in both the rejection rates and adsorption ratios of o-toluidine and tricyclazole. The distribution coefficient, micellar loading and micelle binding constant were evaluated to confirm the effectiveness for the MEUF treatment of these two pollutants.

Roles of surfactants in pressure-driven membrane separation processes: a review

Surfactants widely exist in various kinds of wastewaters which could be treated by pressure-driven membrane separation (PDMS) techniques. Due to the special characteristics of surfactants, they may affect the performance of membrane filtration. Over the last two decades, there are a number of studies on treating wastewaters containing surfactants by PDMS. The current paper gives a review of the roles of surfactants in PDMS processes. The effects of surfactants on membrane performance were discussed via two aspects: influence of surfactants on membrane fouling and enhanced removal of pollutants by surfactants. The characteristics of surfactants in solution and at solid-liquid interface were summarized. Surfactants in membrane filtration processes cause membrane fouling mainly through adsorption, concentration polarization, pore blocking, and cake formation, and fouling degree may be influenced by various factors (feed water composition, membrane properties, and operation conditions). Furthermore, surfactants may also have a positive effect on membrane performance. Enhanced removal of various kinds of pollutants by PDMS in the presence of surfactants has been summarized, and the removal mechanism has been revealed. Based on the current reports, further studies on membrane fouling caused by surfactants and enhanced removal of pollutants by surfactant-aided membrane filtration were also proposed.