An Aspergillus aculateus strain was capable of producing agriculturally useful nanoparticles via bioremediation of iron ore tailings

Occupational safety assessment of biogenic urea nanofertilisers using in vitro pulmonary, and in vivo ocular models

Nanomaterials (NMs) are now gaining popularity to be used in agriculture as fertilisers to reduce the dose of conventional fertilisers and enhance nutrient use efficiency. Urea has found its application as a conventional nitrogenous fertiliser since long, however, the nutrient use efficiency of the bulk form of urea is low due to issues related to ammonia volatilisation. This study proposes a biogenic synthesis route to develop urea nanoparticles that can be used as nano-fertiliser for better uptake and hence improved nutrient efficiency. Large scale production and widespread application of these nano-fertilisers to the agricultural fields will enhance the direct exposure to workers and farmers. Therefore, the occupational safety evaluation becomes critical. In this study, we report a new method for synthesis of urea nanoparticles (TNU, absolute size: 12.14 ± 7.79 nm) followed by nano-safety evaluation. Herein, the pulmonary and ocular compatibilities of TNU were investigated in vitro and in vivo respectively. The assay for cellular mitochondrial activity was carried out on human lung fibroblasts (WI-38) under varied TNU exposure concentrations up to 72 h. The acute biocompatibility effect, ocular irritation and sub-lethal effects were measured on New Zealand Rabbit. The results show that TNU do not exhibit any cytotoxicity and detrimental cell mitochondrial activity up to the highest tested concentration of 1000 μg/mL and 72 h of testing. The animal experiment results also show that neither acute nor sub-lethal toxic effects can be detected after TNU ocular instillation up to 21 days when tested up to environmentally relevant concentration of 15 μg/mL. These results suggest the occupational safety of biogenic urea nanoparticles and support its application as nanofertiliser.

Eco-friendly strategy for preparation of high-purity silica from high-silica IOTs using S-HGMS coupling with ultrasound-assisted fluorine-free acid leaching technology

Iron ore tailings (IOTs), a typical hazardous solid waste, seriously threaten human health and the ecological environment. However, the abundance of quartz, particularly in high-silica IOTs, renders them useful. Yet, state-of-the-art technologies have rarely reported the preparation of high-purity silica from high-silicon IOTs. Thus, this study proposed an eco-friendly technology for producing high-purity silica from high-silica IOTs through the coupling of superconducting high gradient magnetic separation (S-HGMS) preconcentration with leaching followed by the use of ultrasound-assisted fluorine-free acid solution. Following an analysis of the separation index and chemical composition, the optimum conditions for the quartz preconcentration were determined as a magnetic flow ratio of 0.068 T s/m, a slurry flow velocity of 500 mL/min, and a pulp concentration of 40 g/L. Consequently, the SiO₂ grade increased from 69.32% in the raw sample to 93.12% in quartz concentrate following the application of S-HGMS, with the recovery reaching 45.24%. X-ray diffraction, vibrating sample magnetometer, and scanning electron microscope analyses indicated that quartz was effectively preconcentrated from the tailings by S-HGMS. Subsequently, employing the "ultrasound-assisted fluorine-free acid leaching process," impurity elements were removed and high-purity silica was produced. Under optimal leaching conditions, the SiO₂ purity of silica sand increased to 97.42%. Following a three-stage acid leaching process with 4 mol/LHCl +2 mol/LH₂C₂O₄, the removal efficiency of Al, Ca, Fe, and Mg exceeded 97% for all cases, and the SiO₂ purity in high-purity silica reached 99.93%. Thus, this study proposes a new strategy for the preparation of high-purity quartz from IOTs, which facilitated the effective realization of the high-value utility of the tailings. Furthermore, it provides a theoretical basis for the industrial application of IOTs, which is of great scientific significance and practical application value.

Mechanism of nanotoxicity in Chlorella vulgaris exposed to zinc and iron oxide

•

Growth kinetics of C. vulgaris is influenced by NPs exposure.

•

NPs exposure influence proline, carotenoid, activity of SOD, CAT and LDH.

•

NPs exposure disintegrate cellular membrane.

•

Zinc and iron oxide NPs are more toxic to C. vulgaris compared to bulk counterpart.

Usage of nanoparticle in various products has increased tremendously in the recent past. Toxicity of these nanoparticles can have a huge impact on aquatic ecosystem. Algae are the ideal organism of the aquatic ecosystem to understand the toxicity impact of nanoparticles. The present study focuses on the toxicity evaluation of zinc oxide (ZnO) and iron oxide (Fe₂O₃) nanoparticles towards freshwater microalgae, Chlorella vulgaris. The dose dependent growth retardation in Chlorella vulgaris is observed under ZnO and Fe₂O₃ nanoparticles and nanoform attributed more toxicity than their bulk counterparts. The IC₅₀ values of ZnO and Fe₂O₃ nanoparticles was reported at 0.258 mg L⁻¹ and 12.99 mg L^-1 whereas, for the bulk-form, it was 1.255 mgL^-1 and 17.88 mg L⁻¹, respectively. The significant decline in chlorophyll content and increase in proline content, activity of superoxide dismutase and catalase, indicated the stressful physiological state of microalgae. An increased lactate dehydrogenase level in treated samples suggested membrane disintegration by ZnO and Fe₂O₃ nanoparticles. Compound microscopy, scanning electron microscopy and transmission electron microscopy confirm cell entrapment, deposition of nanoparticles on the cell surface and disintegration of algal cell wall. Higher toxicity of nanoform in comparison to bulk chemistry is a point of concern.