Influence of electrolysis conditions on the treatment of herbicide bentazon using artificial UVA radiation and sunlight. Identification of oxidation products

Preparation of La-doped Ti/SnO2-Sb2O4 anode and its electrochemical oxidation performance of rhodamine B

In this paper, La-doped Ti/SnO2-Sb2O4 electrode was prepared by electrodeposition and used for electrochemical degradation of rhodamine B. The optimum preparation conditions of the electrode were optimized as deposition time of 15 min and calcination at 500 ℃ for 2 h. The water treatment conditions were selected as initial pH 3.0, electrolyte Na2SO4 concentration 0.1 M, current density 30 mA cm-2, and initial rhodamine B concentration 20 mg L-1; the color and TOC removal of RhB reached 99.78% and 82.41% within 30 min. The FESEM, XRD, XPS, CV, LSV, and EIS characterization studies demonstrated that Ti/SnO2-Sb2O4-1%La electrode had a dense structure and the highest oxygen evolution potential (2.14 V) and lowest charge transfer resistance (0.198 Ω cm-2), indicating that doped La has lower energy consumption. Moreover, La doping can expand the specific surface area, active site, performance of pollutant degradation, and service life of the electrode. Especially, the service life of Ti/SnO2-Sb2O4-1%La is increased by three times, and the maximum life span reaches 90 min (1000 mA cm-2, 1 M H2SO4). Free radical quenching experiments show that ·OH plays a major role in the degradation of RhB. The Ti/SnO2-Sb2O4-1%La electrode prepared in this paper and its results will provide data support and reference for the design of efficient electrocatalytic electrode.

Hydrogen peroxide electrogeneration from O2 electroreduction: A review focusing on carbon electrocatalysts and environmental applications

Hydrogen peroxide (H2O2) stands as one of the foremost utilized oxidizing agents in modern times. The established method for its production involves the intricate and costly anthraquinone process. However, a promising alternative pathway is the electrochemical hydrogen peroxide production, accomplished through the oxygen reduction reaction via a 2-electron pathway. This method not only simplifies the production process but also upholds environmental sustainability, especially when compared to the conventional anthraquinone method. In this review paper, recent works from the literature focusing on the 2-electron oxygen reduction reaction promoted by carbon electrocatalysts are summarized. The practical applications of these materials in the treatment of effluents contaminated with different pollutants (drugs, dyes, pesticides, and herbicides) are presented. Water treatment aiming to address these issues can be achieved through advanced oxidation electrochemical processes such as electro-Fenton, solar-electro-Fenton, and photo-electro-Fenton. These processes are discussed in detail in this work and the possible radicals that degrade the pollutants in each case are highlighted. The review broadens its scope to encompass contemporary computational simulations focused on the 2-electron oxygen reduction reaction, employing different models to describe carbon-based electrocatalysts. Finally, perspectives and future challenges in the area of carbon-based electrocatalysts for H2O2 electrogeneration are discussed. This review paper presents a forward-oriented viewpoint of present innovations and pragmatic implementations, delineating forthcoming challenges and prospects of this ever-evolving field.

Progress in environmental monitoring and mitigation strategies for herbicides and insecticides: A comprehensive review

Herbicides and insecticides are pervasively applied in agricultural sector to increase the yield by controlling or eliminating bug vermin and weeds. Although, resistance development occurs, direct and indirect impact on human health and ecosystem is clearly visible. Normally, herbicides and pesticides are water soluble in nature; accordingly, it is hard to decrease their deadliness and to dis-appear them from the environment. They are profoundly specific, and considered as poisonous to various peoples in agricultural and industrial work places. In order to substantially reduce the harmful impacts, it is crucial to thoroughly examine the detection and mitigation measures for these compounds. The primary objective of this paper is to provide an overview of various herbicide and pesticide detection techniques and associated remedial techniques. A short summary on occurrence and harmful effects of herbicides/insecticides on ecosystem has been included to the study. The conventional and advanced, rapid techniques for the detection of insecticides and herbicides were described in detail. A detailed overview on several mitigation strategies including advanced oxidation, adsorption, electrochemical process, and bioremediation as well as the mechanism behind the strategic approaches to reduce the effects of growing pesticide pollution has been emphasized. Regardless of the detection techniques and mitigation strategies, the recent advances employed, obstacles, and perspectives have been discussed in detail.

Multiple Metabolism Pathways of Bentazone Potentially Regulated by Metabolic Enzymes in Rice

Bentazone (BNTZ) is a selective and efficient herbicide used in crop production worldwide. However, the persistence of BNTZ residues in the environment has led to their increasing accumulation in farmland and crops, posing a high risk to human health. To evaluate its impact on crop growth and environmental safety, a comprehensive study was conducted on BNTZ toxicity, metabolic mechanism, and resultant pathways in rice. The rice growth was compromised to the treatment with BNTZ at 0.2-0.8 mg/L (529.95-1060.05 g a.i./ha), while the activities of enzymes including SOD, POD, CAT, GST, GT, and CYP450 were elevated under BNTZ stress. A genome-wide RNA-sequencing (RNA-Seq) was performed to dissect the variation of transcriptomes and metabolic mechanisms in rice exposed to BNTZ. The degradative pathways of BNTZ in rice are involved in glycosylation, hydrolysis, acetylation, and conjugation processes catalyzed by the enzymes. Our data provided evidence that helps understand the BNTZ metabolic and detoxic mechanisms.

Solar photoelectro-Fenton: A very effective and cost-efficient electrochemical advanced oxidation process for the removal of organic pollutants from synthetic and real wastewaters

Recalcitrant and toxic organic pollutants from wastewaters are scarcely removed in conventional wastewater treatment plants. To preserve the water quality, organics need to be removed by developing powerful oxidation technologies. Our laboratory proposed in 2007 a potent electrochemical advanced oxidation process (EAOP) for wastewater remediation, so-called solar photoelectro-Fenton (SPEF). This review summarizes the advances of this emerging technology up to 2022, making evident its effectiveness and cost-efficiency for the destruction of usual organic pollutants. The simultaneous action of generated hydroxyl radicals and the photolysis by sunlight explains the high oxidation power of SPEF respect to other EAOPs. The review is initiated by describing the fundamentals of the process to remark the role of the produced oxidants and the benefits of using solar irradiation in its performance. The photoelectrochemical systems used (bench tank reactor and solar pre-pilot flow plant) and the assessment of the operating variables are discussed. The characteristics of the most common homogeneous SPEF for the degradation and mineralization of several synthetic solutions of industrial chemicals, herbicides, pharmaceuticals, and synthetic organic dyes, as well as of some real wastewaters, are further described. The influence of the photoelectrochemical cell, electrodes, solution pH, electrolyte composition, Fe²⁺ and pollutant concentration, and current density is analyzed. The performance of a homogeneous SPEF-like process with active chlorine and heterogeneous SPEF processes with solid catalysts such as Fe₃O₄ and sodium vermiculite is also discussed. Finally, the advances of homogeneous SPEF combined with other techniques like solar photocatalysis, solar photoelectrocatalysis, anaerobic digestion, and nanofiltration are reported.

Decontamination of wastewater containing contaminants of emerging concern by electrooxidation and Fenton-based processes - A review on the relevance of materials and methods

In recent years, there has been an increasingly growing interest regarding the use of electrochemical advanced oxidation processes (EAOPs) which are considered highly promising alternative treatment techniques for addressing environmental issues related to pollutants of emerging concern. In EAOPs, electrogenerated oxidizing agents, such as hydroxyl radical (HO^•), can react non-selectively with a wide range of organic compounds, degrading and mineralizing their structures to unharmful molecules like CO₂, H₂O, and inorganic ions. To this date, a broad spectrum of advanced electrocatalysts have been developed and applied for the treatment of compounds of interest in different matrices, specifically aiming at enhancing the degradation performance. New combined methods have also been employed as alternative treatment techniques targeted at circumventing the major obstacles encountered in Fenton-based processes, such as high costs and energy consumption, which still contribute significantly toward inhibiting the large-scale application of these processes. First, some fundamental aspects of EAOPs will be presented. Further, we will provide an overview of electrode materials which have been recently developed and reported in the literature, highlighting different anode and cathode structures employed in EAOPs, their main advantages and disadvantages, as well as their contribution to the performance of the treatment processes. The influence of operating parameters, such as initial concentrations, pH effect, temperature, supporting electrolyte, and radiation source, on the treatment processes were also studied. Finally, hybrid techniques which have been reported in the literature and critically assess the most recent techniques used for evaluating the degradation efficiency of the treatment processes.

Synthesis and Characterization of N and Fe-Doped TiO2 Nanoparticles for 2,4-Dimethylaniline Mineralization

The present study aimed to evaluate the feasibility of developing low-cost N- and Fe-doped TiO₂ photocatalysts for investigating the mineralization of 2,4-dimethylaniline (2,4-DMA). With a single anatase phase, the photocatalysts showed high thermal stability with mass losses of less than 2%. The predominant oxidative state is Ti⁴⁺, but there is presence of Ti³⁺ associated with oxygen vacancies. In materials with N, doping was interstitial in the NH₃/NH⁴⁺ form and for doping with Fe, there was a presence of Fe-Ti bonds (indicating substitutional occupations). With an improved band gap energy from 3.16 eV to 2.82 eV the photoactivity of the photocatalysts was validated with an 18 W UVA lamp (340–415 nm) with a flux of 8.23 × 10⁻⁶ Einstein s⁻¹. With a size of only 14.45 nm and a surface area of 84.73 m² g⁻¹, the photocatalyst doped with 0.0125% Fe mineralized 92% of the 2,4-DMA in just 180 min. While the 3% N photocatalyst with 12.27 nm had similar performance at only 360 min. Factors such as high surface area, mesoporous structure and improved E_bg, and absence of Fe peak in XPS analysis indicate that doping with 0.0125% Fe caused a modification in TiO₂ structure.

Toward more sustainable photovoltaic solar electrochemical oxidation treatments: Influence of hydraulic and electrical distribution

Powering electrochemical technologies with renewable energies is a promising way to get more sustainable environmental remediation techniques. However, the operational conditions of those processes must be optimized to undergo fast and efficient treatments. In this work, the influence of electrical and hydraulic connections in the performance of a set of two electrolyzers directly powered by photovoltaic panels was evaluated. Despite both electrolyzers were assembled using the same electrode material, they showed different performances. Results indicate that the electrolyzer with higher ohmic resistance and higher overpotential attained a greater production of oxidant species, being produced under the most efficient strategy around 4.8 and 15.1 mmol of oxidants per Ah by electrolyzer 1 and 2, respectively. Nevertheless, an excess of oxidant production because of an inefficient energy management, led to low removal efficiencies as a consequence of a waste of energy into undesirable reactions. Regarding the hydraulic distribution of wastewater between the cells, it was found to influence on the total remediation attained, being the serial connection 2.5 and 1.8 more efficient than a parallel wastewater distribution under series and parallel electrical strategies, respectively. Regarding electrical strategies, parallel connections maximize the use of power produced by the photovoltaic panels. Furthermore, this allows the system to work under lower current densities, reducing the mass transfer limitations. Considering both advantages, a hydraulic connection of the cells in series and an electrical connection in parallel was found to reach the highest specific removal of pollutant, 2.52 mg clopyralid (Wh)^-1. Conversely, the opposite strategy (parallel hydraulic connection-series electrical connection) showed the lowest remediation ratio, 0.48 mg clopyralid (Wh)^-1. These results are important to be considered in the design of electrolytic treatments of waste directly powered by photovoltaic panels, because they show the way to optimize the cells stack layout in full-scale applications, exhibiting significant impact on the sustainability of the electrochemical application.

Spatiotemporal pattern models for bioaccumulation of pesticides in herbivores: An approximation theory for North American white-tailed deer

Dietary exposure is a major cause of pesticide bioaccumulation in herbivores. However, various types of natural conditions affect the structure of the complicated herbivores' diets, making it difficult to assess their exposure to pesticides. In this study, to evaluate the role of pesticides in the terrestrial food web, a dynamic hybrid dietary model was developed for North American white-tailed deer (or whitetails), which integrates different plant types and the digestibility of deer's foods. Moreover, an equivalent season approach was introduced to generalize the pesticide intake rate geographically. The results indicate that the soil-to-whitetail (meat) bioaccumulation factor (BAF) values in summer are significantly higher than those of other seasonal periods, owing to the high food availability and digestibility. Pesticides with low octanol/water partition coefficients have a high computed soil-to-plant BAF, but a low plant-to-whitetail (meat) BAF, because the transpiration process dominates the bioaccumulation process in plants. Lipid absorption plays a more important role in herbivores and lowers the biomagnification ratio (a smaller amount of pesticides flows to the next level of the food chain). According to the equivalent season approach, geographic locations with warmer climates facilitate pesticide bioaccumulation at a higher level of the terrestrial food web.

In-situ dosage of Fe2+ catalyst using natural pyrite for thiamphenicol mineralization by photoelectro-Fenton process

The degradation of the antibiotic thiamphenicol has been studied by photoelectro-Fenton (PEF) process with UVA light using pyrite particles as catalyst source. Pyrite is a sulfide mineral that naturally acidifies the reaction medium and releases Fe²⁺, thus promoting the effective generation of OH from Fenton's reaction. The assays were made in an IrO₂/air-diffusion cell, which yielded similar results to a boron-doped diamond (BDD)/air-diffusion one at a lower cost. In dark conditions, electro-Fenton (EF) process showed an analogous ability for drug removal, but mineralization was much poorer because of the large persistence of highly stable by-products. Their photolysis explained the higher performance of PEF. Conventional homogeneous PEF directly using dissolved Fe²⁺ exhibited a lower mineralization power. This suggests the occurrence of heterogeneous Fenton's reaction over the pyrite surface. The effect of current density and drug content on pyrite-catalyzed PEF performance was examined. The drug heteroatoms were gradually converted into SO₄^2-, Cl^- and NO₃^- ions. Nine aromatic derivatives and two dichloroaliphatic amines were identified by GC-MS, and five short-chain carboxylic acids were detected by ion-exclusion HPLC. A reaction route for thiamphenicol mineralization by PEF process with continuous H₂O₂ and Fe²⁺ supply on site is proposed.

Layered platforms of Ti4O7 as flow-through anodes for intensifying the electro-oxidation of bentazon

In this study, we prepared Ti₄O₇ porous electrodes with continuous layered structures characterized by different layer-to-layer distance (from 2 to 10 μm) but the same total void fraction (88-90%), to modulate the electrodes' permeability and the volumetric electrochemical surface area (from 90 to 840 cm² cm^-3). These platforms were evaluated as anodes in the electro-oxidation (EO) of bentazon in a three-electrode cell under galvanostatic conditions, operated both in traditional batch (TB) or batch recycle flow-through (BRFT) modes. The performance was significantly enhanced when the liquid was recirculated through the lamellar structure of the electrodes. In BRFT mode, the electrode interlayer gap was found to be a key factor to control the bentazon and total organic carbon (TOC) conversions. For the best conditions evaluated (BRFT, 10 μm-interlayered Ti₄O₇ electrodes with a volumetric surface area of 90 cm² cm^-3), the effect of the applied current (1 or 3 mA) and liquid flow rate (10, 12 or 14 mL. min^-1) was investigated. Specific energy consumption (SEC) values were estimated to reveal the performance of each of the EO treatments from an energetic point of view. The use of 10 μm-interlayered Ti₄O₇ electrodes at 1 mA in BRFT mode at a flow rate of 14 mL min^-1 showed the best results, yielding 85% bentazon removal, 57% mineralization and SEC values of 0.006 kWh.g_TOC^-1 after 6 h of treatment. This contribution highlights the use of layered Ti₄O₇ electrodes as a promising strategy for intensifying EO processes, pointing to a trade-off between the accessibility to the internal electrode structure and the volumetric electrode surface area to enhance the contact between the target molecules and the hydroxyl radicals physisorbed on the electrode surface, while minimizing simultaneously the energy requirements.

Removal of Phenazopyridine from wastewater by merging biological and electrochemical methods via Azolla filiculoides and electro-Fenton process

In the present study, the potential of Azolla filiculoides (A. filiculoides) was first investigated for degradation of Phenazopyridine (PhP), an analgesic drug. The effects of main variables such as initial pharmaceutical concentration, amount of plant, and pH were studied on the efficiency of the biological process. It was observed that A. filiculoides was able to remove pharmaceuticals from contaminated water up to 85.90% during 48 h. Then, the electro-Fenton (EF) method was applied for further removal of PhP yielding a removal rate of about 98.72% under optimum conditions during 2 h. The effects of variables including the current, amount of catalyst, and pH were also studied in this phase. Also, the probability of adsorption was investigated during this step. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis were performed for the used magnetite nanoparticles, total organic carbon (TOC) were performed to investigate PhP removal efficiency during the reaction time and Gas chromatography-mass spectrometry (GC-MS) were performed to analyze degradation byproducts of PhP. Based on the results, it was found that a combination of these bioremediation and electrochemical removal steps were capable of PhP removal from contaminated water. Therefore, this approach may be effective for phytoremediation of pharmaceutical-contaminated aquatic ecosystems.