Kinetics of microbial selenite reduction by novel bacteria isolated from activated sludge

Simultaneous selenite reduction and nitrogen removal using Paracoccus sp.: Reactor performance, microbial community, and mechanism

Selenium-containing wastewater has a high concentration of nitrogen compounds (ammonia nitrogen [NH4+-N]), leading to water pollution. Thus, the simultaneous reduction of selenium and removal of nitrogen compounds during wastewater treatment has become the top priority. However, the exogenous bacteria that can simultaneously reduce selenite and remove ammonia nitrogen and colonize in the wastewater treatment systems have not been reported. Additionally, the effects and the underlying mechanism of biofortification on the reduction and removal efficiency of the microorganisms remain unclear. In this study, we investigated the simultaneous selenite reduction and nitrogen removal efficiency of Paracoccus sp. (strain SSJ) isolated from selenium-contaminated soil and explored biofortification effects on the composition and structure of the microbial community. Using sequencing biofilm batch reactors (SBBRs), the structural and functional characteristics of the microbial community were systematically compared between the control (group A) and biofortified (group B) groups. Strain SSJ could simultaneously reduce 63.28% of selenite and remove 93.05% of NH4+-N within 24 h. Moreover, no accumulation of nitrate nitrogen (NO3--N) and nitrite nitrogen (NO2--N) was observed in the reaction process. The performance and stability of the SBBRs enhanced by strain SSJ were greatly improved. Illumina sequencing results showed that strain SSJ was surprisingly colonized, and Paracoccus was the predominant genus in group B (relative abundance: 13.93%). Moreover, PICRUSt2 analysis results suggested that the microbial community in group B demonstrated increased rates of ammonia nitrogen removal through ammonia assimilation and selenite reduction through sulfur metabolism and glutathione-mediated selenite reduction pathway. In summary, our findings shed light on the mechanism for simultaneous selenite reduction and nitrogen removal by biofortification and provide novel microbial resources for the treatment of selenite-containing wastewater.

Unraveling the molecular mechanisms of selenite reduction: transcriptomic analysis of Bacillus reveals the key role of sulfur assimilation

Selenite biotransformation by microorganisms is an effective detoxification and assimilation process. However, current knowledge of the molecular mechanisms of selenite reduction remains circumscribed. Here, the reduction of Se(IV) by a highly selenite-resistant Bacillus sp. SL (up to 50 mM) was systematically analyzed, and the molecular mechanisms of selenite reduction were investigated. Remarkably, 10 mM selenite was entirely transformed by the strain SL within 20 h, demonstrating a faster conversion rate compared to other microorganisms. Furthermore, glutathione (GSH) and exopolysaccharides (EPS) changes were also monitored during the process. Transcriptomic analysis revealed that the genes of ferredoxin-sulfite oxidoreductase (6.82) and sulfate adenylyltransferase (6.32) were significantly upregulated, indicating that the sulfur assimilation pathway is the primary reducing pathway involved in selenite reduction by strain SL. Moreover, key genes associated with NAD(P)/FAD-dependent oxidoreductases and thioredoxin were significantly upregulated. The reduction of Se(IV) was mediated by multiple pathways in strain SL. To our knowledge, this is the initial report to identify the involvement of sulfur assimilation pathway in selenite reduction for bacillus, which is rare in aerobic bacteria.

Selenite bioreduction by a consortium of halophilic/halotolerant bacteria and/or yeasts in saline media

Selenium oxyanions are released into environments by natural and anthropogenic activities and are present in agricultural and glass manufacturing wastewater in several locations worldwide. Excessive amounts of this metalloid have adverse effects on the health of living organisms. Halophilic and halotolerant microorganisms were selected for selenium oxyanions remediation due to presence of significant amount of salt in selenium-containing wastewater. Effects of aeration, carbon sources, competitive electron acceptors, and reductase inhibitors were investigated on SeO₃^2- bio-removal. Additionally, NO₃^--containing wastewater were exploited to investigate SeO₃^2- remediation in synthetic agricultural effluents. The results showed that the SeO₃^2- removal extent is maximum in aerobic conditions with succinate as a carbon source. SO₄^2- and PO₄^3- do not significantly interfere with SeO₃^2- reduction, while WO₄^2- and TeO₃^2- decrease the SeO₃^2- removal percentage (up to 35 and 37%, respectively). Furthermore, NO₃^- had an adverse effect on SeO₃^2- biotransformation by our consortia. All consortia reduced SeO₃^2- in synthetic agricultural wastewaters with a 45-53% removal within 120 h. This study suggests that consortia of halophilic/halotolerant bacteria and yeasts could be applied to treat SeO₃^2--contaminated drainage water. In addition, sulphates, and phosphates do not interfere with selenite bioreduction by these consortia, which makes them suitable candidates for the bioremediation of selenium-containing wastewater.

Use of Microbial Consortia in Bioremediation of Metalloid Polluted Environments

Metalloids are released into the environment due to the erosion of the rocks or anthropogenic activities, causing problems for human health in different world regions. Meanwhile, microorganisms with different mechanisms to tolerate and detoxify metalloid contaminants have an essential role in reducing risks. In this review, we first define metalloids and bioremediation methods and examine the ecology and biodiversity of microorganisms in areas contaminated with these metalloids. Then we studied the genes and proteins involved in the tolerance, transport, uptake, and reduction of these metalloids. Most of these studies focused on a single metalloid and co-contamination of multiple pollutants were poorly discussed in the literature. Furthermore, microbial communication within consortia was rarely explored. Finally, we summarized the microbial relationships between microorganisms in consortia and biofilms to remove one or more contaminants. Therefore, this review article contains valuable information about microbial consortia and their mechanisms in the bioremediation of metalloids.

Biogenic synthesis of selenium and tellurium nanoparticles by marine bacteria and their biological activity

Selenium (SeNPs) and tellurium nanoparticles (TeNPs) were synthesized by green technology using the three new bacterial marine isolates (strains PL 2476, AF 2469 and G 2451). Isolates were classified as Pseudoalteromonas shioyasakiensis according to 16S rRNA sequence analysis, morphological characteristics, and biochemical reactions. The bioreduction processes of isolates were studied in comparison with the previously described Alteromonas macleodii (strain 2328). All strains exhibited significant tolerance to selenite and tellurite up to 1000 µg/mL. A comparative analysis of the bioreduction processes of the isolates demonstrated that the strains have a high rate of reduction processes. Characterization of biogenic red SeNPs and black TeNPs using scanning electron microscopy (SEM), EDX analysis, Dynamic Light Scattering, and micro-Raman Spectroscopy revealed that all the isolates form stable spherical selenium and tellurium nanoparticles whose size as well as elemental composition depend on the producer strain. Nanoparticles of the smallest size (up to 100 nm) were observed only for strain PL 2476. Biogenic SeNPs and TeNPs were also characterized and tested for their antimicrobial, antifouling and cytotoxic activities. Significant antimicrobial activity was shown for nanoparticles at relatively high concentrations (500 and 1000 µg/mL), with the antimicrobial activity of TeNPs being more significant than SeNPs. In contrast, against cell cultures (breast cancer cells (SkBr3) and human dermal fibroblasts (HDF) SeNPs showed greater toxicity than tellurium nanoparticles. Studies have demonstrated the high antifouling effectiveness of selenium and tellurium nanoparticles when introduced into self-polishing coatings. According to the results obtained, the use of SeNPs and TeNPs as antifouling additives can reduce the concentration of leachable biocides used in coatings, reducing the pressure on the environment.

Se transformation and removal by a cattail litter treatment system inoculated with sulfur-based denitrification sludge: Role of the microbial community composition under various temperature and aeration conditions

With a narrow margin between deficiency and toxicity, rising levels of selenium (Se) are threatening aquatic ecosystems. To investigate the role of microorganisms in Se bioremediation, a cattail litter system inoculated with the sulfur-based denitrification sludge was conducted. The results show the litter, as a carrier and nutrient source for bacteria, efficiently removed Se by ~ 97.0% during a 12-d treatment with water circulating. As the major removal pathways, immobilization rates of selenite were ~ 2.9-fold higher than selenate, and the volatilization, contributing to ~ 87.7% of the total Se removal, was significantly correlated with temperature (positively) and oxidation-reduction potential (ORP; negatively). Using X-ray absorption spectroscopy to speciate litter-borne Se, more Se⁰ formed without aeration due to abundant Se-reducing bacteria, among which Azospira and Azospirillum were highly related to the removal of both Se oxyanions, while Desulfovibrio, Azoarcus, Sulfurospirillum, Thauera, Geobacter, Clostridium, and Pediococcus were the major contributors to selenate removal. Overall, our study suggests microbial Se metabolism in the litter system was significantly affected by temperature and ORP, which could be manipulated to enhance Se removal efficiency and the transformation of selenate/selenite into low toxic Se⁰ and volatile Se, reducing risks posed by the residual Se in the system.

Recent advances in technologies for removal and recovery of selenium from (waste)water: A systematic review

Selenium (Se) is distributed into different environmental compartments by natural and anthropogenic activities, and generally discharged in the form of selenate [SeO₄^2-] and selenite [SeO₃^2-], which are both toxic. Physical-chemical and biological treatment processes have been reported to exhibit good treatment efficiencies for Se from aqueous streams, only a few demonstrated to achieve effluent concentrations <5 μg/L. Moreover, there are only a few numbers of studies that describe the progress in technological developments over the last decade. Therefore, to unify the state of knowledge, identify ongoing research trends, and determine the challenges associated with available technologies, this systematic review critically analyses the published research on Se treatment. Specific topics covered in this review include (1) Se chemistry, toxicity, sources and legislation, (2) types of Se treatment technologies, (3) development in Se treatment approaches, (4) Se recovery and circular economy and (5) future prospects. The current research has been found to majorly focused on Se removal via adsorption techniques. However, the key challenges facing Se treatment technologies are related to the presence of competing ions in the solution and the persistence of selenate compared to selenite during their reduction.

Diversity of Endophytic Bacteria in Cardamine hupingshanensis and Potential of Culturable Selenium-Resistant Endophytes to Enhance Seed Germination Under Selenate Stress

The endophytic bacterial communities of Se hyperaccumulator Cardamine hupingshanensis collected from greenhouse and selenium mining area in Enshi City were investigated by Illumina sequencing technology. In addition, 14 culturable endophytic selenium-resistant strains were isolated and their selenium tolerance and plant growth promotion abilities were studied. The results showed that phylum Proteobacteria predominated in all the plants (> 70%) regardless of their habitats, with most of the OTUs related to Betaproteobacteria, Alphaproteobacteria, and Gammaproteobacteria. Roots harbored many more OTUs and showed higher alpha diversities than the leaves. Both growing environment and specific microflora selection of plants were found to have noticeable effects on endophytic bacterial community structure. The 14 culturable endophytes belonging to 11 bacterial genera were able to resist different levels of selenite and selenate, with their MIC ranges of 10-120 mM and 100-600 mM. Among them, Oceanobacillus and Terribacillus genera were firstly reported for the selenium-tolerant properties of their members. Inoculation experiment revealed that three endophytic strains (CHP07, CHP08, and CHP14) with excellent plant growth-promoting traits were beneficial for growth of Brassica chinensis seeds at germination stage under 0.19 mM selenate stress.

Biological Manganese Removal by Novel Halotolerant Bacteria Isolated from River Water

Manganese-oxidizing bacteria have been widely investigated for bioremediation of Mn-contaminated water sources and for production of biogenic Mn oxides that have extensive applications in environmental remediation. In this study, a total of 5 Mn-resistant bacteria were isolated from river water and investigated for Mn removal. Among them, Ochrobactrum sp. NDMn-6 exhibited the highest Mn removal efficiency (99.1%). The final precipitates produced by this strain were defined as a mixture of Mn₂O₃, MnO₂, and MnCO₃. Optimal Mn-removal performance by strain NDMn-6 was obtained at a temperature range of 25-30 °C and the salinity of 0.1-0.5%. More interestingly, strain NDMn-6 could be resistant to salinities of up to 5%, revealing that this strain could be possibly applied for Mn remediation of high salinity regions or industrial saline wastewaters. This study also revealed the potential of self-detoxification mechanisms, wherein river water contaminated with Mn could be cleaned by indigenous bacteria through an appropriate biostimulation scheme.

Composition of bacterial communities in municipal wastewater treatment plant

Efforts to understand the environmental and biological factors that influence the dynamics of microbial communities have received substantial attention in microbial ecology. In this study, Illumina MiSeq high-throughput sequencing technology was used to examine the microbial community structure of activated sludge in municipal wastewater treatment systems (Chuzhou city, China). Overall, Proteobacteria, Chloroflexi, Actinobacteria, Acidobacteria, Actinobacteria, Bacteroidetes, and Firmicutes were the most dominant phyla in the five activated sludge samples. However, the community structure of nitrifying bacteria was relatively simple, and diversity was low; only AOB (Nitrosomonas) and NOB (Nitrospira) were detected. The dominant bacteria in the anaerobic sludge, anoxic sludge and oxic sludge were the same, and each bacterial species was relatively uniform, with differences only in proportions. Redundancy analysis indicated that pH, TP and COD were strong environmental factors influencing the bacterial community distribution. PICRUSt was used to describe the metabolic and functional abilities of the activated sludge bacterial communities. The results emphasized the vast genetic diversity of these organisms, which are involved in various essential processes such as amino acid transport and metabolism, energy production and conversion, cell wall/membrane/envelope/biogenesis, signal transduction mechanisms, and carbohydrate transport and metabolism. Activated sludge of municipal wastewater treatment systems can be ranked in the following order based on the 16S rRNA gene copy numbers of the detected phylotypes: S1 > S2 > S4 > S5 > S3. This study provides basic data and a theoretical analysis of the optimal design and operation in wastewater treatment plants.