Fluoride removal from natural volcanic underground water by an electrocoagulation process: Parametric and cost evaluations

Synthesis and characterization of a crosslinked deacetylated chitin modified chicken bone waste-derived hydroxyapatite and TiO2 biocomposite for defluoridation of drinking water

This work represents an innovative approach to the synthesis and characterization of a chitosan-based biocomposite for fluoride adsorption. The work involved the development of a biocomposite based on modified chicken bone waste-derived hydroxyapatite and TiO2. The composite was characterized using scanning electron microscopy with Energy Dispersive X-ray analysis (SEM-EDX), X-ray diffraction (XRD), Fourier-transform infrared analysis (FTIR), thermal-gravimetric analysis (TGA), and X-ray photoelectron spectroscopy (XPS). The optimum parameters for fluoride removal were determined, and the kinetic data was better fitted to the pseudo-first-order model. The Liu equations provided a better description of the experimental adsorption isotherm data. The adsorption mechanism and the interaction of the composite with fluoride were better understood using Density Functional Theory (DFT) calculations and Non-Covalent Interactions (NCI) analyses, paving the way for more effective and efficient defluoridation methods.

Insights of using microbial material in fluoride removal from wastewater: A review

Fluoride is an essential trace element for the human body, but excessive fluoride can cause serious environmental and health problems. Therefore, developing efficient fluoride removal technologies is crucial. This review summarizes the progress made in using microbial materials to remove fluoride from wastewater, covering strategies that involve pure cultures of bacteria, fungi, and algae, as well as modified microbial materials and bioreactors. Live microorganisms exhibit high efficiency in adsorbing low concentrations of fluoride, while modified microbial materials are more suitable for treating high concentrations of fluoride. The review discusses the adsorption mechanisms and influencing factors of these technologies, and evaluates their practical application potential through techno-economic analysis. Finally, future research directions are proposed, including the optimization of modification technologies and the selection of effective microbial species, providing theoretical guidance and a basis for future microbial defluoridation technologies.

Approaches for the Efficient Removal of Fluoride from Groundwater: A Comprehensive Review

Contamination of groundwater with fluoride represents a significant global issue, with high concentrations posing serious public health threats. While fluoride is a critical element in water, excessive levels can be detrimental to human health and potentially life-threatening. Addressing the challenge of removing fluoride from underground water sources via nanotechnological approaches is a pressing concern in environmental science. To collate relevant information, extensive literature searches were conducted across multiple databases, including Google Scholar, PubMed, Scopus, Web of Science, the American Chemical Society, Elsevier, Springer, and the Royal Society of Chemistry. VOS Viewer software version 1.6.20 was employed for a systematic review. This article delivers an exhaustive evaluation of various groundwater fluoride removal techniques, such as adsorption, membrane filtration, electrocoagulation, photocatalysis, and ion exchange. Among these, the application of nanoparticles emerges as a notable method. The article delves into nano-compounds, optimizing conditions for the fluoride removal process and benchmarking their efficacy against other techniques. Studies demonstrate that advanced nanotechnologies-owing to their rapid reaction times and potent oxidation capabilities-can remove fluoride effectively. The implementation of nanotechnologies in fluoride removal not only enhances water quality but also contributes to the safeguarding of human health.

Adsorption removal of fluoride from polluted drinking waters using Mn-Al-La oxide

Trimetal oxides have received high attention in treatment of fluoride-polluted drinking waters. In this study, Mn-Al-La (MAL) oxide with a mole ratio of 2:1:1 was successively prepared and characterized by XRD, FTIR, XPS, and TEM. It exhibited as cotton-like assemblages (500-800 nm of axial lengths), and BET specific surface area was 52 m2/g. It was used to study fluoride adsorptions in aqueous solutions by batch experiments, under different adsorbent/adsorbate levels, times, temperatures, pH and coexisting anions, and treat simulated groundwater (with 2.85 mg/L fluoride and pH 7.0) by batch and column tests. Adsorption data well fitted to pseudo-second-order rate model (R2 = 0.996-0.999), and Langmuir (R2 = 0.962 - 0.997) and Freundlich (R2 = 0.964-0.989) isothermal models. Their maximum adsorption capacities could reach 45-113 mg/g. Only H2PO4- anions had a restrictive impact at pH 7.0, and there was a good removal ability at pH 3-9. Adsorption processes were spontaneous, endothermic, and random. Adsorption mechanisms were electrostatic interaction and ligand exchange at pH 7.0. Adsorption capacity could reach 73% of initial value at pH 7.0, after three cycles. All application data on the polluted groundwater treatments show MAL oxide is a potential adsorbent for fluoride removals.

Zirconium/lanthanum-modified chitosan/polyvinyl alcohol composite adsorbent for rapid removal of fluoride

A novel and easily separable adsorbent in the shape of a membrane for the rapid removal of fluoride from water was prepared after testing Zr, La and LaZr to modify a chitosan/polyvinyl alcohol composite adsorbent (CS/PVA-Zr, CS/PVA-La, CS/PVA-LA-Zr). The CS/PVA-La-Zr composite adsorbent can remove a large amount of fluoride within 1 min of contact time, and the adsorption equilibrium can be reached within 15 min. The fluoride adsorption behavior of the CS/PVA-La-Zr composite can be described by pseudo-second-order kinetics and Langmuir isotherms models. The morphology and structure of the adsorbents were characterized by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD). The adsorption mechanism was studied using Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS), and which showed that ion exchange occurred mainly with hydroxide and fluoride ions. This study showed that an easily operable, low-cost and environmentally friendly CS/PVA-La-Zr has the potential to remove fluoride effectively from drinking water in a short time.

Preparation of aluminium-hydroxide-modified diatomite and its fluoride adsorption mechanism

As the current excessive accumulation of fluoride (F^-) in the environment can be hazardous to human health, it is essential to remove fluoride from wastewater. In this study, diatomite (DA) was used as a raw material and modified using aluminum hydroxide (Al-DA) for use in the adsorption of F^- from water bodies. SEM, EDS, XRD, FTIR, and Zeta potential characterization analyses were carried out; adsorption tests and kinetic fitting were performed, and the effects of pH, dosing quantity, and presence of interfering ions on the adsorption of F^- by the materials were investigated. The results show that the Freundlich model effectively describes the adsorption process of F^- on DA, which therefore involves adsorption-complexation interactions; however, the Langmuir model effectively describes the adsorption process of F^- on Al-DA, corresponding to unimolecular layer adsorption mainly via ion-exchange interactions, that is, adsorption is dominated by chemisorption. Aluminum hydroxide was shown to be the main species involved in F^- adsorption. The efficiency of F^- removal by DA and Al-DA was over 91% and 97% for 2 h, and the adsorption kinetics were effectively fit by the quasi-secondary model, suggesting that chemical interactions between the absorbents and F^- control the adsorption process. The adsorption of F^- was highly dependent on the pH of the system, and the maximum adsorption performance was obtained at pH 6 and 4. The optimal dosage of DA and Al-DA was 4 g/L. Even in the presence of interfering ions, the removal of F^- on Al-DA reached 89%, showing good selectivity. XRD and FTIR studies showed that the mechanism of F^- adsorption on Al-DA involved ion exchange and the formation of F-Al bonds.

Fluoride Levels in Supply Water from the Canary Islands Region

The Canary Islands, located in the Atlantic Ocean, are an archipelago of volcanic origin which, for decades, has been affected by natural fluoride contamination in the water supply of some of its islands, mainly the island of Tenerife. In addition, recent volcanic eruptions in the archipelago and the increased demand for water supply have led to an increase in the fluoride content in other areas which, historically, were not affected. Fluoride content was determined in 274 water supply samples from the most populated islands of the Canary Islands (Tenerife and Gran Canaria) collected during the months of June 2021 to May 2022. The samples were analysed by fluoride ion selective potentiometry. The highest concentrations in Tenerife were found in the municipalities of Sauzal (7.00 mg/L) and Tegueste (5.39 mg/L), both water samples are over the parametric value of 1.5 mg/L set in the supply water legislation. In the Gran Canaria Island, the highest fluoride levels were found in Valsequillo and Mogán with 1.44 mg/L in both locations, but under the parametric fluoride value abovementioned. Consumption of just 1 L of water per day in the El Sauzal area would result in a contribution rate of 77% for adults and children over 15 years of age (Upper Level value of 7 mg/day) and 108% for children 9-14 years of age (UL value of 5 mg/day). The contribution rates increase considerably, reaching or exceeding 100% of the reference value (UL) with increasing consumption of 1 to 2 L of water per day. Therefore, it is considered that there is a health risk of overexposure to fluoride on the island of Tenerife. In the case of the island of Gran Canaria, it has been shown that even the consumption of 2 litres of water per day does not confer contribution rates that pose a health risk.

State-of-the-art of research progress on adsorptive removal of fluoride-contaminated water using biochar-based materials: Practical feasibility through reusability and column transport studies

Fluoride (F^-) is one of the essential elements found in soil and water released from geogenic sources and several anthropogenic activities. Fluoride causes fluorosis, dental and skeletal growth problems, teeth mottling, and neurological damage due to prolonged consumption, affecting millions worldwide. Adsorption is an extensively implemented technique in water and wastewater treatment for fluoride, with significant potential due to efficiency, cost-effectiveness, ease of operation, and reusability. This review highlights the current state of knowledge for fluoride adsorption using biochar-based materials and the limitations of biochar for fluoride-contaminated groundwater and industrial wastewater treatment. Biochar materials have shown significant adsorption capacities for fluoride under the influence of low pH, biochar dose, initial concentration, temperature, and co-existing ions. Modified biochar possesses various functional groups (-OH, -CC, -C-O, -CONH, -C-OH, X-OH), in which enhanced hydroxyl (-OH) groups onto the surface plays a significant role in fluoride adsorption via electrostatic attraction and ion exchange. Regeneration and reusability of biochar sorbents need to be performed to a greater extent to improve removal efficiency and reusability in field conditions. Furthermore, the present investigation identifies the limitations of biochar materials in treating fluoride-contaminated drinking groundwater and industrial effluents. The fluoride removal using biochar-based materials at an industrial scale for understanding the practical feasibility is yet to be documented. This review work recommend the feasibility of biochar-based materials in column studies for fluoride remediation in the future.

Simultaneous removal of fluoride and nitrate from synthetic aqueous solution and groundwater by the electrochemical process using non-coated and coated anode electrodes: A human health risk study

Co-presence of fluoride (F^-) and nitrate (NO₃^-) in water causes numerous health complications. Thus, they should be eliminated by an appropriate method like the EC process. In this research, simultaneous removal of F^- and NO₃^- from synthetic aqueous solution and groundwater has been considered by the EC technique under operational parameters like anode materials (un-coated (Al and Fe) and synthesized coated (Ti/TiRuSnO₂ and Ti/PbO₂)), cathode materials (Cu, St, and Gr), current density (12, 24, and 36 mA/cm²), inter-electrode distance (0.5, 1, and 2 cm), pH (5.5, 7, and 8.5), NaCl concentrations (0.5, 1, and 1.5 g/L), electrolysis time (15, 30, 45, 60, 90, and 120 min), NO₃^- concentrations (75, 150, and 225 mg/L), and F^- concentrations (2, 4, 6, and 8 mg/L) for the first time in this research. The results proved that Al as non-coated anode and Cu as cathode electrodes were more effective in the co-removal of F^- and NO₃^-. The maximum removal efficiencies of 94.19 and 95% were observed at the current density of 36 mA/cm², 1 cm of inter-electrode distance, pH 7, 1 g/L of NaCl, and 90 min electrolysis time by Al-Cu electrode for F^- (2 mg/L) and NO₃^- (75 mg/L), respectively. The higher efficiency of Al-Cu electrodes was due to the simultaneous occurrence of electrocoagulation, electroreduction, and electrooxidation processes. Al-Cu electrode application considerably diminished f- and NO3- concentrations in the groundwater. Health risk assessment proved that HQ of F^- was significantly decreased after treatment by the Al-Cu electrode. Thus, the EC process using an appropriate and effective electrode is a promising technique for treating aqueous solutions containing F^- and NO₃^-.

Removal of nutrients and other emerging inorganic contaminants from water and wastewater by electrocoagulation process

The continual discharge of emerging inorganic pollutants into natural aquatic systems and their negative effects on the environment have motivated the researchers to explore and develop clean and efficient water treatment strategies. Electrocoagulation (EC) is a rapid and promising pollutant removal approach that does not require any chemical additives or complicated process management. Therefore, inorganic pollutant treatment via the EC process is considered one of the most feasible processes. The potential developments of EC process may make the process a wise choice for water treatment in the future. Thus, the present study mainly focuses on the use of EC technology to remove nutrients and other emerging inorganic pollutants from water medium. The operating factors that influence EC process efficiency are explained. The major advancement of the EC technique as well as field-implemented units are also discussed. Overall, this study mainly focuses on emerging issues, present advancements, and techno-economic considerations in EC process.

Structural modification of aluminum oxides for removing fluoride in water: crystal forms and metal ion doping

In this paper, the effect of different crystal forms of Al₂O₃ on fluoride removal was studied. All crystal forms of Al₂O₃ were based on the same boehmite precursor and were obtained using a hydrothermal and calcination method. γ-Al₂O₃ had higher fluoride removal performance (52.15 mg/g) compared with θ-Al₂O₃ and α-Al₂O₃. Density functional theory (DFT) calculations confirmed that fluoride removal was greatest for γ-Al₂O₃, followed by θ-Al₂O₃ and α-Al₂O₃, and γ-Al₂O₃ possessed the strongest fluoride binding energy (-3.93 eV). The typical adsorption behaviour was consistent with the Langmuir model and pseudo-second-order model, indicating chemical and monolayer adsorption. Different metal ions were used to modify γ-Al₂O₃, and lanthanum had the best effect. Lanthanum oxide was shown to play an important role in fluoride removal. The best La/Al doping ratio was 20 At%. The adsorption process of the composite was also consistent with chemical and monolayer adsorption. When the La/Al doping rate was 20%, the adsorption capacity reached 94.64 mg/g. Compared with γ-Al₂O₃ (1.39 × 10^-7 m/s), the adsorption rate of 20La-Al₂O₃ was 3.93 × 10^-7 m/s according to the mass transfer model. Furthermore, DFT was used to provide insight into the adsorption mechanism, which was mainly driven by electrostatic attraction and ion exchange.

Fluoride removal from aqueous solution via environmentally friendly adsorbent derived from seashell

Nowadays, the presence of excessive ions in water resources is of utmost concern and has attracted increasing attention; therefore, excessive amounts of these ions such as fluoride should be removed from drinking water. Conventional water treatment processes are shown to be incapable of the complete removal of redundant fluoride from aqueous water bodies, whereas adsorption is a promising, effective, cost–benefit, and simple method for this purpose. This study aimed to synthesize effective adsorbents from bivalve shells and evaluate the adsorption function of bivalve shells in removing fluoride from aqueous solutions. In this study, the oyster shell was collected from the Persian Gulf’s seaside and were crushed by manual mortar and blender, and graded with standard sieves with 70 mesh size. The prepared bivalve shell was characterized by SEM and FTIR. To investigate and optimize various variables on fluoride removal percentage a response surface methodology based on central composite design (RSM-CCD) was used. Under optimal conditions (pH: 5.5, adsorbent dose: 0.3 g/L, contact time: 85 min and fluoride concentration: 3 mg/L) the maximum removal efficiency was 97.26%. Results showed that the adsorption equilibrium and kinetic data were matched with the isotherm Langmuir Model (R² = 0.98) with q_max = 27.31 mg/g and pseudo-second-order reaction (R² = 0.99). Also, a thermodynamic study exhibited that the adsorption process of fluoride into bivalve shells was an exothermic reaction and could not be a spontaneous adsorption process. Based on the results, the bivalve shell was found as an appropriate adsorbent to remove fluoride from aqueous solutions.

Minimizing the Fluoride Load in Water Using the Electrocoagulation Method: An Experimental Approach

The abundant presence of fluoride (F-) in surface water bodies is an environmental concern because of its effects on human health; medical reports confirmed that fluoride intake above 1.5 mg/L leads to many health complications, including but not limited to weak bones and enamel fluorosis. Thus, the World Health Organisation (WHO) defines 1.20 mg/L as the maximum permissible F- concentration in drinking water. The electrocoagulation method (EC) is globally practised to remove many pollutants from water due to its cost-effectiveness, safety, and ease of use. However, EC has some drawbacks, such as the lack of reactors’ design. In this study, a new EC reactor, which uses four drilled aluminium electrodes and a variant cross-section section container, was designed and used to remove F- from water. The design of the new EC eliminated the need for water mixers. The ability of the new EC unit to remove F- from synthetic water was evaluated at different current densities (CD) (1–3 mA/cm2), electrode distances (ELD) (5–15 mm), pH of the solution (pHoS) (4–10), and initial F- concentrations (IFC) (5–20 mg/L). The outcomes of this study prove that the new reactor could remove as much as 98.3% of 20 mg/l of F- at CD, ELD, pHoS, and IFC of 2 mA/cm2, 5 mm, and 4 and 10 mg/L, respectively.

Removal of fluoride from coke wastewater by aluminum doped chelating ion-exchange resins: a tertiary treatment

Coke wastewater is one of the most problematic industrial wastewaters, due to its large volume and complex pollutant load. In this study, ion exchange technology was investigated with the objective of reducing the fluoride content of the effluent from a coke wastewater treatment plant (26.7 mg F^-/L). Two Al-doped exchange resins with chelating aminomethyl-phosphonic acid and iminodiacetic groups were assessed: Al-doped TP260 and TP207 resins, respectively. The effect of resin dosage, varying from 5 to 25 g/L, was evaluated. F^- removal was within the range 57.8-89.3% and 72.0-92.1% for Al-doped TP260 and TP207, respectively. A kinetic study based on a generalized integrated Langmuir kinetic equation fitted the experimental data (R² > 0.98). The parameters of the said kinetics met the optimal conditions for the ion exchange process, which seemed to be more favorable with Al-doped TP260 resin than with Al-doped TP207 resin, using the same resin dosage. Furthermore, the experimental data were well described (R² > 0.98) by Langmuir and Freundlich isotherm models, in agreement with the findings of the kinetic study: the maximum sorption capacity was obtained for the Al-doped TP260 resin.

Goethite/montmorillonite adsorption coupled with electrocoagulation for improving fluoride removal from aqueous solutions

A new material GMS is produced as electrodes in the electrocoagulation (EC) process for F− removing from aqueous environments. The removal rate reaches 99.47% through the EC/GMS. Adsorption and co-precipitation are the main F− removal pathways.

Removal of inorganic pollutants using electrocoagulation technology: A review of emerging applications and mechanisms

Electrocoagulation (ECoag) technique has shown considerable potential as an effective method in separating different types of pollutants (including inorganic pollutants) from various sources of water at a lower cost, and that is environmentally friendly. The EC method's performance depends on several significant parameters, including current density, reactor geometry, pH, operation time, the gap between electrodes, and agitation speed. There are some challenges related to the ECoag technique, for example, energy consumption, and electrode passivation as well as its implementation at a larger scale. This review highlights the recent studies published about ECoag capacity to remove inorganic pollutants (including salts), the emerging reactors, and the effect of reactor geometry designs. In addition, this paper highlights the integration of the ECoag technique with other advanced technologies such as microwave and ultrasonic to achieve higher removal efficiencies. This paper also presents a critical discussion of the major and minor reactions of the electrocoagulation technique with several significant operational parameters, emerging designs of the ECoag cell, operating conditions, and techno-economic analysis. Our review concluded that optimizing the operating parameters significantly enhanced the efficiency of the ECoag technique and reduced overall operating costs. Electrodes geometry has been recommended to minimize the passivation phenomenon, promote the conductivity of the cell, and reduce energy consumption. In this review, several challenges and gaps were identified, and insights for future development were discussed. We recommend that future studies investigate the effect of other emerging parameters like perforated and ball electrodes on the ECoag technique.

Electrocoagulation as a Promising Defluoridation Technology from Water: A Review of State of the Art of Removal Mechanisms and Performance Trends

Fluoride ions present in drinking water are beneficial to human health when at proper concentration levels (0.5–1.5 mg L−1), but an excess intake of fluoride (>1.5 mg L−1) may pose several health problems. In this context, reducing high fluoride concentrations in water is a major worldwide challenge. The World Health Organization has recommended setting a permissible limit of 1.5 mg L−1. The application of electrocoagulation (EC) processes has received widespread and increasing attention as a promising treatment technology and a competitive treatment for fluoride control. EC technology has been favourably applied due to its economic effectiveness, environmental versatility, amenability of automation, and low sludge production. This review provides more detailed information on fluoride removal from water by the EC process, including operating parameters, removal mechanisms, energy consumption, and operating costs. Additionally, it also focuses attention on future trends related to improve defluoridation efficiency.

Arsenic and fluoride removal by electrocoagulation process: A general review

The environmental sector has expressed a growing interest in using electrocoagulation (EC) to treat groundwater/wastewater for drinking/recycling purposes. In the EC process, the electro-dissolution of sacrificial metallic anodes through direct application of current/cell potential dissolves the metals, which precipitate as oxides and hydroxides depending on the electrolyte pH. These particles have large surface areas and can remove pollutants by coagulation. The EC process has been considered an alternative technology due to its versatility, efficiency, low cost, and environmental compatibility. Unfortunately, the lack of knowledge about scaling-up this process has limited its implementation at the industrial scale. The aim of this study is to provide a review of the EC process used for removing arsenic and fluoride from groundwater and wastewater. Approximately 80 published studies were reviewed for this paper. The fundamentals of the EC process and importance of its operating conditions, i.e., electrode material, current density, supporting electrolyte, and pH, are reported in this paper. Additionally, overview of floc characterization and energy consumption are also presented. Finally, this paper also discusses the future perspectives.

Distributed treatment systems

This section presents a review of the scientific literature published in 2019 on topics relating to distributed treatment systems. This review is divided into the following sections: constituent removal, treatment technologies, planning and treatment management, and other topics. PRACTITIONER POINTS: Highlights changes and innovation in removal techniques and technologies in water treatment. Reviews management systems of distributed treatment systems. Discusses point-of-use treatment systems.

Removal of fluoride from multicomponent water solutions with the use of monovalent selective ion-exchange membranes

Fluorine is a chemical element which is often present in natural environment. According to the World Health Organization (WHO) standards fluoride content in drinking water cannot be higher than 1.5 mg F^-/L. Nitrate was also found in many regions in the world. According to guidelines its content in drinking water cannot exceed 50 mg NO₃^-/L. Ingestion of fluoride and nitrate in excess leads to various health issues. There are many methods of fluoride removal, e.g. reverse osmosis, ion exchange or electrodialysis (ED). The aim of the research was to evaluate the influence of nitrate on fluoride separation by electrodialysis with monovalent selective ion-exchange membranes (PC-MVA and PC-MVK). During experiments the laboratory installation PCCell BED-1-System was applied. The ED tests were conducted at constant current density (0.78, 1.72, and 2.34 mA/cm²). Model solutions containing fluoride (5, 10, 15 mg F^-/L), nitrate (15, 30, 45 mg NO₃^-/L) and sodium chloride (0.5 g NaCl/L) were applied. The obtained results showed that the ED process with monovalent selective ion-exchange membranes allowed to decrease fluoride content in product water below the WHO guidelines. It was observed that competition between nitrate and fluoride ions occurred during their transport through the anion-exchange membranes. The energy demand was dependent on the current density as well as on the salt concentration in treated solutions.

Removal of fluoride from wastewater solution using Ce-AlOOH with oxalic acid as modification

In this paper, Ce-AlOOH were investigated to develop as an adsorbent for removing fluoride. Oxalic acid was selected as an effectively modified reagent to improve the performance of adsorption. Cerium existed in the form of CeO₂ and kept good stability during the adsorption process through XRD, TEM, BET, Raman, and Infrared spectra. The adsorption capacity could be improved with the addition of cerium (62.8 mg/g). Specially, the oxalic acid modification significantly promoted the adsorption capacity to 90 mg/g. There adsorption isotherm and kinetics were estimated independently. These adsorption behaviors were in accordance with the Freundlich model and pseudo-second-order model, indicating that chemisorption was the rate-determining step. the obtained adsorbents all exhibited good recycling performance using oxalic acid as the regeneration reagent. The species of tetravalent cerium was the important adsorption sites. The mechanism was carefully explored by XPS analysis. The fluoride adsorption process can be ascribed to the combined effect of the electrostatic action, surface coordination, and ion exchange between M-OH and F^-. Furthermore, modification of oxalic acid exhibited a new easier way to quickly increase M-OH content, which contributed to the dominated adsorption sites.