Biohydrogen and poly-β-hydroxybutyrate production by winery wastewater photofermentation: Effect of substrate concentration and nitrogen source

Valorization of Purple Phototrophic Bacteria Biomass Resulting from Photo Fermentation Aimed at Biohydrogen Production

This study evaluated the feasibility of contextually producing hydrogen, microbial proteins, and polyhydroxybutyrate (PHB) using a mixed culture of purple phototrophic bacteria biomass under photo fermentative conditions. To this end, three consecutive batch tests were conducted to analyze the biomass growth curve and to explore the potential for optimizing the production process. Experimental findings indicated that inoculating reactors with microorganisms from the exponential growth phase reduced the duration of the process. Furthermore, the most effective approach for simultaneous hydrogen production and the valorization of microbial biomass was found when conducting the process during the exponential growth phase of the biomass. At this stage, achieved after 3 days of fermentation, the productivities of hydrogen, PHB, and microbial proteins were measured at 63.63 L/m3 d, 0.049 kg/m3 d, and 0.045 kg/m3 d, respectively. The biomass composition comprised a total intracellular compound percentage of 56%, with 27% representing PHB and 29% representing proteins. Under these conditions, the estimated daily revenue was maximized, amounting to 0.6 $/m3 d.

Polyhydroxyalkanoates production in purple phototrophic bacteria ponds: A breakthrough in outdoor pilot-scale operation

The versatile capacity of purple phototrophic bacteria (PPB) for producing valuable bioproducts has gathered renewed interest in the field of resource recovery and waste valorisation. However, greater knowledge regarding the viability of applying PPB technologies in outdoor, large-scale systems is required. This study assessed, for the first time, the upscaling of the phototrophic polyhydroxyalkanoate (PHA) production technology in a pilot-scale system operated in outdoor conditions. An integrated system composed of two up-flow anaerobic sludge blanket (UASB) reactors (for fermentation of wastewater with molasses), and two high-rate algal ponds retrofitted into PPB ponds, was operated in a wastewater treatment plant under outdoor conditions. UASB's adaptation to the outdoor temperatures involved testing different operational settings, namely hydraulic retention times (HRT) of 48 and 72 h, and molasses fermentation in one or two UASBs. Results have shown that the fermentation of molasses in both UASBs with an increased HRT of 72 h was able to ensure a suitable operation during colder conditions, achieving 3.83 ± 0.63 g CODFermentative Products/L, compared to the 3.73 ± 0.85 g CODFermentative Products/L achieved during warmer conditions (molasses fermentation in one UASB; HRT 48 h). Furthermore, the PPB ponds were operated under a light-feast/dark-aerated-famine strategy and fed with the fermented wastewater and molasses from the two UASBs. The best PHA production was obtained during the summer of 2018 and spring of 2019, attaining 34.7 % gPHA/gVSS with a productivity of 0.11 gPHA L-1 day-1 and 36 % gPHA/gVSS with a productivity of 0.14 gPHA L-1 day-1, respectively. Overall, this study showcases the first translation of phototrophic PHA production technology from an artificially illuminated laboratory scale system into a naturally illuminated, outdoor, pilot-scale system. It also addresses relevant process integration aspects with UASBs for pre-fermenting wastewater with molasses, providing a novel operational strategy to achieve photosynthetic PHA production in outdoor full-scale systems.

Culture optimization to enhance carotenoid production of a selected purple nonsulfur bacterium and its activity against acute hepatopancreatic necrosis disease-causing Vibrio parahaemolyticus

Purple nonsulfur bacteria (PNSB) were investigated for their carotenoid production and anti-vibrio activity against acute hepatopancreatic necrosis disease (AHPND)-causing Vibrio parahaemolyticus. To test carotenoid production, selected strains were cultivated in basic isolation medium (BIM), glutamate acetate medium, G5 medium and artificial acetic acid wastewater (AAW) medium. From 144 PNSB, Rhodopseudomonas palustris KTSSG46 was selected to produce carotenoids under microaerobic light conditions in BIM. When the culture medium was optimized, strain KTSSG46 grown in BIM modified with l-glutamate at 1 g/L more effectively inhibited AHPND-causing V. parahaemolyticus strains than standard BIM with 1 g/L (NH₄ )₂ SO₄ . BIM was further modified with 1.23 g/L MgSO₄ ·7H₂ O and carotenoid production increased 40.22%. Carotenoid production at day 2 by strain KTSSG46 grown in BIM modified with l-glutamate at 1 and 1.23 g/L MgSO₄ ·7H₂ O was the same as production in BIM modified with monosodium glutamate (MSG). Culture supernatants from all BIM formulations showed similar activity against the resistant AHPND strain SR2. Based on high-performance liquid chromatography, carotenoids of strain KTSSG46 might be canthaxanthin. Grown in BIM modified with MSG, strain KTSSG46 could produce inexpensive carotenoids and release anti-vibrio compounds that, applied as shrimp feed additive, would prevent AHPND strains.

Biomedical Applications of Polyhydroxyalkanoate in Tissue Engineering

Tissue engineering technology aids in the regeneration of new tissue to replace damaged or wounded tissue. Three-dimensional biodegradable and porous scaffolds are often utilized in this area to mimic the structure and function of the extracellular matrix. Scaffold material and design are significant areas of biomaterial research and the most favorable material for seeding of in vitro and in vivo cells. Polyhydroxyalkanoates (PHAs) are biopolyesters (thermoplastic) that are appropriate for this application due to their biodegradability, thermo-processability, enhanced biocompatibility, mechanical properties, non-toxicity, and environmental origin. Additionally, they offer enormous potential for modification through biological, chemical and physical alteration, including blending with various other materials. PHAs are produced by bacterial fermentation under nutrient-limiting circumstances and have been reported to offer new perspectives for devices in biological applications. The present review discusses PHAs in the applications of conventional medical devices, especially for soft tissue (sutures, wound dressings, cardiac patches and blood vessels) and hard tissue (bone and cartilage scaffolds) regeneration applications. The paper also addresses a recent advance highlighting the usage of PHAs in implantable devices, such as heart valves, stents, nerve guidance conduits and nanoparticles, including drug delivery. This review summarizes the in vivo and in vitro biodegradability of PHAs and conducts an overview of current scientific research and achievements in the development of PHAs in the biomedical sector. In the future, PHAs may replace synthetic plastics as the material of choice for medical researchers and practitioners.

Anodic Oxidation of Industrial Winery Wastewater Using Different Anodes

Winery wastewater represents the largest waste stream in the wine industry. This deals with the mineralization of the organic matter present in winery wastewater using anodic oxidation and two types of anodes—namely, a boron-doped diamond electrode (BDD) and two mixed metal oxides (MMO), one with the nominal composition Ti/Ru0.3Ti0.7O2 and the other with Ti/Ir0.45Ta0.55O2. To conduct the study, the variability of different quality parameters for winery wastewater from the Chilean industry was measured during eight months. A composite sample was treated using anodic oxidation without the addition of supporting electrolyte, and the experiments were conducted at the natural pH of the industrial wastewater. The results show that this effluent has a high content of organic matter (up to 3025 ± 19 mg/L of total organic carbon (TOC)), which depends on the time of the year and the level of wine production. With MMO electrodes, TOC decreased by 2.52% on average after 540 min, which may be attributed to the presence of intermediate species that could not be mineralized. However, when using a BDD electrode, 85% mineralization was achieved due to the higher generation of hydroxyl radicals. The electrolyzed sample contained oxamic, acetic, and propionic acid as well as different ions such as sulfate, chloride, nitrate, and phosphate. These ions can contribute to the formation of different species such as active species of chlorine, persulfate, and perphosphate, which can improve the oxidative power of the system.

A preliminary study on a novel bioaugmentation technique enhancing lactic acid production by mixed cultures fermentation

The paper is a preliminary study on the selection of lactic acid producing microorganisms from a mixed microbial population via bioaugmentation. The bioaugmentation technique is based on pH sudden variations occurring in sequential batch steps of a dark fermentation process applied to simple substrates. Different conditions are tested and compared. The structure of microbial communities and concentrations of metabolic intermediates are analyzed to study the possible substrate conversion routes. Obtained results indicate that the initial mixed culture produced a lactic acid percentage of 5% in terms of COD_LA/COD_PRODUCTS. In the most favourable conditions, the selected culture produced a lactic acid percentage of 59%. The analysis of the composition of microbial communities before and after the bioaugmentation processes, indicates that lactic acid production mainly results from the population change to bacteria belonging to the genus Bacillus. Indeed, the relative abundance of Bacilli increased from 0.67%, to 8.40% during the bioaugmentation cycle.

Carbon catabolite repression occurrence in photo fermentation of ethanol-rich substrates

The paper investigates the phenomenon of Carbon Catabolite Repression occurring during photo fermentation of ethanol-rich effluents, which usually contain ethanol as main carbon source, and glycerol as secondary one. The study was conducted using mixed phototrophic cultures, adopting, as substrate, the effluent produced by the alcoholic fermentation of sugar cane bagasse. In order to elucidate the phenomenon, experimental tests were carried out using two different ethanol to glycerol ratios. Results were compared with those resulting from pure ethanol and glycerol conversion. According to the obtained data, as a result of Carbon Catabolite Repression occurrence, the presence of glycerol negatively affects hydrogen production. Indeed, part of the ethanol source is converted to biomass and polyhydroxybutyrate rather than to hydrogen. In more details, the presence of glycerol determines a drop of the hydrogen production, which goes from 12 % to 32 %, according to the ethanol/glycerol ratio, compared to the production obtained from fermentation of ethanol alone. Therefore, to promote the hydrogen production, it is advisable to apply strategies to produce low glycerol concentrations in the ethanol production stage.

Photoautotrophs-Bacteria Co-Cultures: Advances, Challenges and Applications

Photosynthetic microorganisms are among the fundamental living organisms exploited for millennia in many industrial applications, including the food chain, thanks to their adaptable behavior and intrinsic proprieties. The great multipotency of these photoautotroph microorganisms has been described through their attitude to become biofarm for the production of value-added compounds to develop functional foods and personalized drugs. Furthermore, such biological systems demonstrated their potential for green energy production (e.g., biofuel and green nanomaterials). In particular, the exploitation of photoautotrophs represents a concrete biorefinery system toward sustainability, currently a highly sought-after concept at the industrial level and for the environmental protection. However, technical and economic issues have been highlighted in the literature, and in particular, challenges and limitations have been identified. In this context, a new perspective has been recently considered to offer solutions and advances for the biomanufacturing of photosynthetic materials: the co-culture of photoautotrophs and bacteria. The rational of this review is to describe the recently released information regarding this microbial consortium, analyzing the critical issues, the strengths and the next challenges to be faced for the intentions attainment.

Main Hydrogen Production Processes: An Overview

Due to its characteristics, hydrogen is considered the energy carrier of the future. Its use as a fuel generates reduced pollution, as if burned it almost exclusively produces water vapor. Hydrogen can be produced from numerous sources, both of fossil and renewable origin, and with as many production processes, which can use renewable or non-renewable energy sources. To achieve carbon neutrality, the sources must necessarily be renewable, and the production processes themselves must use renewable energy sources. In this review article the main characteristics of the most used hydrogen production methods are summarized, mainly focusing on renewable feedstocks, furthermore a series of relevant articles published in the last year, are reviewed. The production methods are grouped according to the type of energy they use; and at the end of each section the strengths and limitations of the processes are highlighted. The conclusions compare the main characteristics of the production processes studied and contextualize their possible use.

Polyhydroxyalkanoates from organic waste streams using purple non-sulfur bacteria

Many microorganisms can produce intracellular and extracellular biopolymers, such as polyhydroxyalkanoates (PHA). Despite PHA's benefits, their widespread at the industrial level has not occurred due mainly to high production costs. PHA production under a biorefinery scheme is proposed to improve its economic viability. In this context, purple non-sulfur bacteria (PNSB) are ideal candidates to produce PHA and other substances of economic interest. This review describes the PHA production by PNSB under different metabolic pathways, by using a wide range of wastes and under diverse operational conditions such as aerobic and anaerobic metabolism, irradiance level, light or dark conditions. Some strategies, such as controlling the feed regime, biofilm reactors, and open photobioreactors in outdoor conditions, were identified from the literature review as the approach needed to improve the process's economic viability when using mixed cultures of PNSB and wastes as substrates.

A review of biopolymer (Poly-β-hydroxybutyrate) synthesis in microbes cultivated on wastewater

The large quantities of non-degradable single use plastics, production and disposal, in addition to increasing amounts of municipal and industrial wastewaters are among the major global issues known today. Biodegradable plastics from biopolymers such as Poly-β-hydroxybutyrates (PHB) produced by microorganisms are potential substitutes for non-degradable petroleum-based plastics. This paper reviews the current status of wastewater-cultivated microbes utilized in PHB production, including the various types of wastewaters suitable for either pure or mixed culture PHB production. PHB-producing strains that have the potential for commercialization are also highlighted with proposed selection criteria for choosing the appropriate PHB microbe for optimization of processes. The biosynthetic pathways involved in producing microbial PHB are also discussed to highlight the advancements in genetic engineering techniques. Additionally, the paper outlines the factors influencing PHB production while exploring other metabolic pathways and metabolites simultaneously produced along with PHB in a bio-refinery context. Furthermore, the paper explores the effects of extraction methods on PHB yield and quality to ultimately facilitate the commercial production of biodegradable plastics. This review uniquely discusses the developments in research on microbial biopolymers, specifically PHB and also gives an overview of current commercial PHB companies making strides in cutting down plastic pollution and greenhouse gases.

A comparative review on clean hydrogen production from wastewaters

This paper provides a unique review of hydrogen production methods with wastewater treatment to depict a clean and sustainable approach. Various methods for hydrogen production from wastewaters are identified and discussed with recent details by discussing the critical challenges, opportunities, and future directions. Five main performance sectors are considered in detail for each hydrogen production method of the recent case studies, including economic, environmental, social, technical, and reliability. Eight hydrogen production methods are reviewed, including anaerobic method, photo fermentation, dark fermentation, electrolysis, electrodialysis, photocatalysis, photoelectrochemical methods, and super water gasification. A comparative assessment of six reviewed methods for hydrogen production, including environmental, economic, energetic, and exergetic impacts, is evaluated. The comparative assessment results indicate that dark fermentation technology is the most economical method, and it is followed by microbial electrolysis and photofermentation. The most environmentally friendly method for the lowest global warming potential (GWP) is the microbial electrolysis method, and it is followed by photocatalysis and photoelectrochemical methods. Furthermore, the highest energy and exergy efficiencies have been recorded for the microbial electrolysis to be 68% and 64.7%, respectively.

Production of Biohydrogen and/or Poly-β-hydroxybutyrate by Rhodopseudomonas sp. Using Various Carbon Sources as Substrate

The polyhydroxyalkanoates (PHA) are family of biopolyesters synthesized by numerous bacteria which are attracting a great attention due to their thermoplastic properties. Polyhydroxybutyrate (PHB) is the most common type of PHA which presents thermoplastic and biodegradable properties. It is synthesized under stressful conditions by heterotrophic bacteria and many photosynthetic microorganisms such as purple non-sulfur bacteria and cyanobacteria. Biological hydrogen (H₂) production is being evaluated for use as a fuel since it is a promising substitute for carbonaceous fuels owing to its high conversion efficiency and high specific content. In the present work, the purple non-sulfur photosynthetic bacterium Rhodopseudomonas sp. for the simultaneous H₂ photo-evolution and poly-β-hydroxybutyrate (PHB) production has been investigated. Three different types of carbon sources were tested in the presence of glutamate as a nitrogen source in a batch cultivation system, under continuous irradiance. The results indicated the fact that the type of carbon source in the culture broth affects in various ways the metabolic activity of the bacterial biomass, as evidenced by the production of PHB and/or H₂ and biomass. The best carbon source for PHB accumulation and H₂ production by Rhodopseudomonas sp. turned out to be the acetate, having the highest H₂ production (2286 mL/L) and PHB accumulation (68.99 mg/L, 18.28% of cell dry weight).