Utilizing eco-friendly kaolinite-biochar composite adsorbent for removal of ivermectin in aqueous media

Exploring the interactions of glyphosate in soil: the sorption scenario upon soil depletion and effect on waterleaf (Talinum triangulare) growth

The pesticide glyphosate has contributed immensely to the ease of farming and high yields. However, the ever-increasing environmental input of pesticides is of particular interest due to several unintended effects on non-target organisms. In soil, the sorption, transport, possible uptake, and effect on plant growth are still not well understood, and much so for the sub-Sahara. Sorption processes are contingent on the soil composition, characteristics, and ambient conditions, and these are becoming increasingly affected by climate change in a way that may alter pesticide fate. Hence, representative sub-Saharan whole soil (WS) treated to eliminate organic matter (OMR) and iron oxides (IOR) was employed to ascertain the contributions of these major constituents to glyphosate sorption processes, as well as ascertain the effect of glyphosate in soil on the growth of Talinum triangulare-waterleaf. Glyphosate sorption for all treatments was rapid with equilibrium at around 720 min. The sorption decreased as pH increased, and was concentration-dependent, gradually increasing with glyphosate concentration. The process was endothermic, and sorption data were better described by the fractal pseudo-second-order and Freundlich adsorption isotherm models, suggesting a complex interplay of interactive sorption forces. The IOR sample (with iron oxide depleted but organic matter intact) exhibited higher sorption than the OMR and WS, highlighting the contribution of organic matter in glyphosate sorption. Hysteresis was high for all samples and increased with temperature. Considering the unregulated usage of glyphosate in the sub-Sahara, the poor sorption, especially in treated soils, observed in this study suggests a high possibility of glyphosate leaching into the aquifer and poisoning of this water source, while the high hysteresis implied the bio-availability of glyphosate in surface soil for plant absorption, hence affecting growth; as confirmed in the waterleaf growth study where growth in the organic-matter/iron-oxide-depleted soils was substantially stunted. Hence, glyphosate affects waterleaf growth, especially in organic-matter/iron-oxide-depleted soils.

Mechanistic interpretation of the sorption of terbuthylazine pesticide onto aged microplastics

Microplastics (MPs) pose a global concern due to their ubiquitous distribution. Once in the environment, they are subject to aging, which changes their chemical-physical properties and ability to interact with organic pollutants, such as pesticides. Therefore, this study investigated the interaction of the hydrophobic herbicide terbuthylazine (TBA), which is widely used in agriculture, with artificially aged polyethylene (PE) MP (PE-MP) to understand how aging affects its sorption. PE was aged by an accelerated weathering process including UV irradiation, hydrogen peroxide, and ultrasonic treatment, and aged particles were characterized in comparison to pristine particles. Sorption kinetics were performed for aged and pristine materials, while further sorption studies with aged PE-MP included determining environmental factors such as pH, temperature, and TBA concentration. Sorption of TBA was found to be significantly lower on aged PE-MP compared to pristine particles because aging led to the formation of oxygen-containing functional groups, resulting in a reduction in hydrophobicity and the formation of negatively charged sites on oxidized surfaces. For pristine PE-MP, sorption kinetics were best described by the pseudo-second-order model, while it was intra-particle diffusion for aged PE-MP as a result of crack and pore formation. Sorption followed a decreasing trend with increasing pH, while it became less favorable at higher temperatures. The isotherm data revealed a complex sorption process on altered, heterogeneous surfaces involving hydrophobic interactions, hydrogen bonding, and π-π interactions, and the process was best described by the Sips adsorption isotherm model. Desorption was found to be low, confirming a strong interaction. However, thermodynamic results imply that increased temperatures, such as those resulting from climate change, could promote the re-release of TBA from aged PE-MP into the environment. Time-of-flight secondary ion mass spectrometry (ToF-SIMS) confirmed TBA sorption onto PE.

Isolation of aqueous pesticides on surface-functionalized SBA-15: glyphosate kinetics and detailed empirical insights for atrazine

Atrazine and glyphosate are two of the most used pesticides around the world causing serious water contamination. In this study, amine-functionalized Santa Barbara Amorphous-15 silica (SBA-15-NH2) was synthesized and employed for the aqueous adsorption of atrazine and glyphosate. The adsorbent was mesoporous post-functionalization with lower surface area, pore volume, size, and stability when compared to the SBA-15. The pesticides adsorption rates were high with over 85% of potential adsorption having occurred within the initial 180 min. The equilibria for atrazine and glyphosate adsorption were 60 and 360 min, respectively, and the rate data fit the fractal pseudo-second-order and pseudo-second-order models, respectively. Atrazine adsorption was higher at lower solution pH with reduced adsorption as the pH value increased. There was enhanced atrazine adsorption as temperature increased from 22 to 32 °C, but further temperature rise resulted in lower adsorption compared to that recorded at 22 °C. The processes comprise electrostatic interaction, trapping of atrazine within mesopores, and multi-layer adsorption of atrazine on surface-adsorbed atrazine. The equilibrium data fitted the Langmuir adsorption isotherm model better than the Freundlich. The SBA-15-NH2 adsorption capacity for atrazine and glyphosate was better than many adsorbents reported in literature, the adsorbent is reusable, and exhibited sustained efficiencies for atrazine that was ≥82% even after 3-cycles, an indication of chemical stability and renewability.

Impacts of kaolinite enrichment on biochar and hydrochar characterization, stability, toxicity, and maize germination and growth

In this study, biochar (BC) and hydrochar (HC) composites were synthesized with natural kaolinite clay and their properties, stability, carbon (C) sequestration potential, polycyclic aromatic hydrocarbons (PAHs) toxicity, and impacts on maize germination and growth were explored. Conocarpus waste was pretreated with 0%, 10%, and 20% kaolinite and pyrolyzed to produce BCs (BC, BCK10, and BCK20, respectively), while hydrothermalized to produce HCs (HC, HCK10, and HCK20, respectively). The synthesized materials were characterized using X-ray diffraction, scanning electron microscope analyses, Fourier transform infrared, thermogravimetric analysis, surface area, proximate analyses, and chemical analysis to investigate the distinction in physiochemical and structural characteristics. The BCs showed higher C contents (85.73-92.50%) as compared to HCs (58.81-61.11%). The BCs demonstrated a higher thermal stability, aromaticity, and C sequestration potential than HCs. Kaolinite enriched-BCs showed the highest cation exchange capacity than pristine BC (34.97% higher in BCK10 and 38.04% higher in BCK20 than pristine BC), while surface area was the highest in kaolinite composited HCs (202.8% higher in HCK10 and 190.2% higher in HCK20 than pristine HC). The recalcitrance index (R50) speculated a higher recalcitrance for BC, BCK10, and BCK20 (R50 > 0.7), minimal degradability for HCK10 and HCK20 (0.5 < R50 < 0.7), and higher degradability for biomass and HC (R50 < 0.5). Overall, increasing the kaolinite enrichment percentage significantly enhanced the thermal stability and C sequestration potential of charred materials, which may be attributed to changes in the structural arrangements. The ∑ total PAHs concentration in the synthesized materials were below the USEPA's suggested limits, indicating their safe use as soil amendments. Germination indices reflected positive impacts of synthesized charred materials on maize germination and growth. Therefore, we propose that kaolinite-composited BCs and HCs could be considered as efficient and cost-effective soil amendments for improving plant growth.

Wastewater surveillance of pharmaceuticals during the COVID-19 pandemic in Mexico City and the Mezquital Valley: A comprehensive environmental risk assessment

This study tracked five pharmaceutically active compounds (PhACs) in Mexico City's sewage, namely, famotidine, indomethacin, dexamethasone, azithromycin, and ivermectin, which were used to treat COVID-19. The monitoring campaign was carried out over 30 months (May 2020 to November 2022), covering the five COVID-19 waves in Mexico. In the Central Emitter, the main sewage outflow, famotidine displayed levels of 132.57 ± 28.16 ng L-1 (range from < LOQ to 189.1 ng L-1), followed by indomethacin (average 672.46 ± 116.4 ng L-1, range from 516.7 to 945.2 ng L-1), dexamethasone (average 610.4 ± 225.7 ng L-1, range from 233.4 to 1044.5 ng L-1), azithromycin (average 4436.2 ± 903.6 ng L-1, range from 2873.7 to 5819.6 ng L-1), and ivermectin (average 3413.3 ± 1244.6 ng L-1, range from 1219.8 to 4622.4 ng L-1). The concentrations of dexamethasone, azithromycin and ivermectin were higher in sewage from a temporary COVID-19 care unit, by a factor of 3.48, 3.52 and 2.55, respectively, compared with those found in municipal wastewater. In the effluent of the Atotonilco Wastewater Treatment Plant (AWWTP), which treats near 60 % of the Mexico City's sewage, famotidine was absent, while concentrations of indomethacin, dexamethasone, azithromycin and ivermectin were 78.2 %, 76.7 %, 74.4 %, and 88.1 % lower than those in the influent, respectively. The occurrence of PhACs in treated and untreated wastewater resulted in medium to high environmental risk since Mexico City's wastewater is reused for irrigation in the Mezquital Valley. There, PhACs were found in irrigation canals at lower levels than those observed in Mexico City throughout the monitoring. On the other hand, famotidine, indomethacin, and dexamethasone were not found in surface water resulting from the infiltration of wastewater through soil in Mezquital Valley, while azithromycin and ivermectin sporadically appeared in surface water samples collected through 2021. Using an optimized risk assessment based on a semi-probabilistic approach, the PhACs were prioritized as ivermectin > azithromycin > dexamethasone > famotidine > indomethacin.

Ivermectin adsorption by commercial charcoal in batch and fixed-bed operations

Emerging contaminants were used during the COVID-19 pandemic, including ivermectin. Studies that limit the optimal adsorption parameters of ivermectin are scarce in the literature. In this study, we analyzed the adsorption of ivermectin with a high surface area and porosity charcoal. Isotherms were better fitted to the Koble-Corrigan model. The maximum capacity was 203 μg g-1 at 328 K. Thermodynamics indicated a spontaneous and endothermic behavior. The equilibrium was quickly reached within the first few minutes regardless of the ivermectin concentration. The linear driving force (LDF) model fitted the kinetic data (qexp = 164.8 μg g-1; qpred = 148.1 μg g-1) at 100 μg L-1 of ivermectin. The model coefficient (KLDF) and diffusivity (Ds) increased with increasing drug concentration. Two sloped curves were obtained in the column experiments, with a breakthrough time of 415 min and 970 min. The capacity of the column (qeq) was 76 μg g-1. The length of the mass transfer zone was 9.04 and 14.13 cm. Therefore, it can be concluded that the adsorption of ivermectin is highly sensitive to changes in pH, being favored in conditions close to neutrality. Commercial activated charcoal was highly efficient in removing the studied compound showing high affinity with very fast kinetics and a good performance in continuous operation mode.

Development of Rice Straw-derived Biochar-Bentonite Composite and its Application for in situ Sequestration of Ammonium and Phosphate Ions in the Degraded Mine Soil

Nutrient pollution has a diverse impact on the environment and human health. The presence of nutrients, such as ammonium and phosphate, is ubiquitous in the environment due to their extensive use in agricultural land and leaching through non-point sources. In this context, biochar-based composites could play an essential role in improving the soil's nutrient retention capacity. The present study aims to develop bentonite-biochar composites (BNT@BC 400 and 600) and utilize them as an ameliorating material in the coal mine degraded soil to reduce the leaching of ammonium and phosphate ions. The bentonite-biochar composite (BNT@BC 400 and 600) was synthesized using the pristine rice straw-derived biochar using the solvothermal method. The biochar was produced at two different pyrolytic temperatures, 400 °C and 600 °C, and denoted as BC 400 and 600, respectively. Hence, the bentonite-biochar composite was denoted as BNT@BC 400 and 600. The BNT@BC 400 and 600 were characterized using the elemental, proximate, SEM, XRD, and FTIR analysis. Subsequently, the BNT@BC composites were evaluated for the adsorptive removal of NH₄⁺ and PO₄^3- ions using batch adsorption and column leaching studies. In the soil columns, the BNT@BC 400 and 600 were mixed with the soil at two different application rates, viz. 1 and 2.5% (w/w). The leaching characteristics data were fitted using three different fixed-bed models to predict the maximum adsorption capacity of the amended soil columns and the dominant mechanism of adsorption. Results indicated that the BNT@BC 600 showed the maximum adsorption capacity of 33.77 and 64.23 mg g^-1 for the adsorption of NH₄⁺ and PO₄^3- ions, respectively. The dominant adsorption mechanisms in the aqueous solution were the electrostatic attraction, complexation, ion exchange, and precipitation processes. In the soil columns, the sorption of NH₄⁺ and PO₄^3- ions was governed by diffusive mass transfer and electrostatic interaction. Findings of the study indicated that incorporating the BNT@BC composite in the soil can significantly reduce the leaching of the NH₄⁺ and PO₄^3- ions and increase the overall soil fertility.

A Gadolinium-Based Magnetic Ionic Liquid for Dispersive Liquid–Liquid Microextraction of Ivermectin from Environmental Water

The recently introduced gadolinium-based magnetic ionic liquid (Gd-MIL) has been exploited as an extractant in dispersive liquid–liquid microextraction (DLLME) for preconcentration of ivermectin (IVR) from water samples followed by analysis using reversed-phase HPLC with UV detection at 245 nm. The utilized Gd-MIL extractant is hydrophobic with markedly high magnetic susceptibility. These features result in an efficient extraction of the lipophilic analyte and facilitate the phase separation under the influence of a strong magnetic field, thus promoting the method sensitivity and increasing the potential for automation. To maximize the IVR enrichment by DLLME, the procedure was optimized for extractant mass, dispersive solvent type/volume, salt addition and diluent pH. At optimized conditions, an enrichment factor approaching 70 was obtained with 4.0-mL sample sizes. The method was validated in terms of accuracy, precision, specificity and limit of quantitation. The method was successfully applied to the determination of IVR in river water samples with a mean relative recovery of 97.3% at a spiked concentration of 400 ng/mL. Compared with other reported methods, this approach used a simpler procedure with improved precision, lower amounts of safer solvents and a short analysis time.

Adsorption Characteristics and Mechanism of Methylene Blue in Water by NaOH-Modified Areca Residue Biochar

To solve the water pollution problem caused by methylene blue (MB), areca residue biochar (ARB) was prepared by pyrolysis at 600 °C, and modified areca residue biochar (M-ARB) was obtained by modifying ARB with 1.5 mol/L NaOH, and they were utilized to adsorb and eliminate MB from water. The structural characteristics of ARB and M-ARB were examined, and the main influencing factors and adsorption mechanism of MB adsorption process were investigated. The outcomes demonstrated an increase in M-ARB’s specific surface area and total pore volume of 66.67% and 79.61%, respectively, compared with ARB, and the pore structure was more abundant, and the content of oxygen element was also significantly increased. When the reaction temperature was 25 °C, starting pH of the mixture was 10, the initial MB concentration was 50 mg/L, the ARB and M-ARB dosages were 0.07 g/L and 0.04 g/L, respectively, the adsorption equilibrium was achieved at about 210 min, and the elimination rate for MB exceeded 94%. The adsorption behaviors of ARB and M-ARB on MB were more in line with the Langmuir isotherm model (R2 > 0.95) and the quasi-secondary kinetic model (R2 > 0.97), which was characterized by single-molecule layer chemisorption. The highest amount of MB that may theoretically be absorbed by M-ARB in water ranging from 136.81 to 152.72 mg/g was 74.99–76.59% higher than that of ARB. The adsorption process was a spontaneous heat absorption reaction driven by entropy increase, and the adsorption mechanism mainly involved electrostatic gravitational force, pore filling, hydrogen bonding, and π–π bonding, which was a complex process containing multiple mechanisms of action. NaOH modification can make the ARB have more perfect surface properties and more functional group structures that can participate in the adsorption reaction, which can be used as an advantageous adsorption material for MB removal in water.

Pharmaceutical compounds used in the COVID-19 pandemic: A review of their presence in water and treatment techniques for their elimination

During the COVID-19 pandemic, high consumption of antivirals, antibiotics, antiparasitics, antiprotozoals, and glucocorticoids used in the treatment of this virus has been reported. Conventional treatment systems fail to efficiently remove these contaminants from water, becoming an emerging concern from the environmental field. Therefore, the objective of the present work is to address the current state of the literature on the presence and removal processes of these drugs from water bodies. It was found that the concentration of most of the drugs used in the treatment of COVID-19 increased during the pandemic in water bodies. Before the pandemic, Azithromycin concentrations in surface waters were reported to be in the order of 4.3 ng L-1, and during the pandemic, they increased up to 935 ng L-1. Laboratory scale studies conclude that adsorption and advanced oxidation processes (AOPs) can be effective in the removal of these drugs. Up to more than 80% removal of Azithromycin, Chloroquine, Ivermectin, and Dexamethasone in aqueous solutions have been reported using these processes. Pilot-scale tests achieved 100% removal of Azithromycin from hospital wastewater by adsorption with powdered activated carbon. At full scale, treatment plants supplemented with ozonation and artificial wetlands removed all Favipiravir and Azithromycin, respectively. It should be noted that hybrid technologies can improve removal rates, process kinetics, and treatment cost. Consequently, the development of new materials that can act synergistically in technically and economically sustainable treatments is required.

A critical review on environmental presence of pharmaceutical drugs tested for the covid-19 treatment

On March 11, 2020, the World Health Organization (WHO) declared COVID-19 a pandemic. The outbreak caused a worldwide impact, becoming a health threat to the general population and its professionals. To date, there are no specific antiviral treatments or vaccines for the COVID-19 infection, however, some drugs are being clinically tested. The use of these drugs on large scale raises great concern about their imminent environmental risk, since the elimination of these compounds by feces and urine associated with the inefficiency of sewage treatment plants in their removal can result in their persistence in the environment, putting in risk the health of humans and of other species. Thus, the goal of this work was to conduct a review of other studies that evaluated the presence of the drugs chloroquine, hydroxychloroquine, azithromycin, ivermectin, dexamethasone, remdesivir, favipiravir and some HIV antivirals in the environment. The research indicated the presence of these drugs in the environment in different regions, with concentration data that could serve as a basis for further comparative studies following the pandemic.

Metals and Antibiotics as Aqueous Sequestration Targets for Magnetic Polyamidoamine-Grafted SBA-15

In this study, a magnetic generation-5 polyamidoamine (G-5 PAMAM) dendrimer-functionalized SBA-15 (mPSBA) composite was synthesized by coupling amine-functionalized silica (SBA-15-NH2) and amine-functionalized magnetic nanoparticles (MNP-NH2) with the G-5 PAMAM, before characterization and aqueous sorption of As(III), Cd(II), tetracycline, and ciprofloxacin using the composite. The mPSBA characterization data exhibited the typical Si-O-Si infrared peaks from the SBA-15 backbone in addition to the acquired characteristic infrared Fe-O and amide-I/II peaks from the MNP and G-5 PAMAM dendrimers, respectively. Postsorption infrared spectra showing shifts for the amide-linked groups indicated the likely points of contaminant attachment on the composite. Its thermal stability was lower than that of SBA-15 but higher than that of SBA-15-NH, while the XRD diffractograms of the backbone SBA-15-NH and MNP were unchanged in the final composite. The mPSBA composite was a better As(III) and Cd(II) adsorbent than SBA-15 by ≈400 and 140%, respectively, with rapid uptake in the first 60 min and equilibrium achieved at 120 min. Sorption was enhanced with increasing pH (until pHpzc) and initial contaminant concentration. The process was spontaneous and endothermic; thus, increasing ambient temperature enhanced Cd(II) sorption. The sorption data fitted better to the homogeneous fractal pseudo-second-order (FPSO) kinetics model and the Brouers-Sotolongo fractal adsorption isotherm models, indicating complex sorption interactions and pore-filling/contaminant trapping within mPSBA. Further experiments using mPSBA for the uptake of tetracycline and ciprofloxacin showed 679% and 325% higher sorption, respectively, compared with that for SBA-15-NH. In addition to the added advantage of easy removal from solution/treated water after the adsorption process, mPSBA sorption capacities for these studied contaminants [As(III): 23.3 mg/g; Cd(II): 74.5 mg/g; tetracycline: 38.4 mg/g; ciprofloxacin: 23.0 mg/g] are better than those of several advanced adsorbents reported in the literature.

Removal of abamectin and conventional pollutants in vertical flow constructed wetlands with Fe-modified biochar

To improve the ability of constructed wetlands to remove abamectin (ABM) and nutrients, the influence of four different substrates on constructed wetlands was studied. Four vertical up-flow constructed wetlands (UVCWs) were established to treat simulated agricultural wastewater: CW1 (quartz sand + pebbles), CW2 (pebbles + coke), CW3 (Fe-modified biochar + pebbles + coke), and CW4 (unmodified biochar + pebbles + coke). Under different combinations of hydraulic loading and organic loading, CW3 was extremely effective at removing nitrogen compared with CW1, CW2 and CW4. We found that CW3 was the most effective at treating ABM and conventional pollutants. The highest efficiency of removal of abamectin (99%), COD (98%), NH₄ ⁺-N (65%), and TP (80%) was obtained in CW3. These results were directly verified by microbiological tests and microbial community analysis. The microbial diversity of CW3 and CW4 was significantly higher than those of CW1 and CW2. Fe-modified biochar provides a feasible and effective amendment for constructed wetlands to improve the nitrogen removal for C/N (2.5 : 1-5 : 1) wastewater by the ability of microbes to remove nitrogen. Fe-modified bamboo charcoal can be used in engineering as a new type of green environmental protection constructed wetland filler in the future.