Electrochemical removal of RRX-3B in residual dyeing liquid with typical engineered carbonaceous cathodes

Efficient removal of methylene blue from water using magnetic Alyssum homolocarpum seed gum-based matrix

In this study, we fabricated magnetic Fe₃O₄ nanoparticles conjugated with anionic hydroxypropyl starch-graft-acrylic acid (Fe3O4@AHSG) for the efficient removal of methylene blue (MB) dye from aqueous solutions. The synthesized nanoconjugates were characterized using various techniques. Scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX) analysis revealed that the particles exhibited homogeneously distributed nanosized spherical shapes with a mean diameter of 41.72 ± 6.81 nm. The EDX analysis confirmed the absence of impurities, with the Fe₃O₄ particles comprising 64.76 % iron and 35.24 % atomic oxygen. Dynamic light scattering (DLS) measurements showed a monodisperse particle system with a mean hydrodynamic size of 135.4 nm (polydispersity index, PI = 0.530) for the Fe₃O₄ nanoparticles and 163.6 nm (PI = 0.498) for the Fe3O4@AHSG adsorbent. Vibrating sample magnetometer (VSM) analysis indicated superparamagnetic behavior for both Fe₃O₄ and Fe₃O₄@AHSG, with higher saturation magnetization (Ms) observed for Fe₃O₄. The dye adsorption studies demonstrated that the adsorbed dye capacity increased with increasing initial MB concentration and adsorbent dose. The pH of the dye solution significantly influenced the adsorption, with the highest adsorption observed at basic pH values. The presence of NaCl reduced the adsorption capacity due to increased ionic strength. Thermodynamic analysis indicated the thermodynamically favorable and spontaneous nature of the adsorption process. Kinetic studies revealed that the pseudo-second-order model provided the best fit to the experimental data, suggesting chemisorption as the rate-limiting step. Overall, Fe₃O₄@AHSG nanoconjugates exhibited excellent adsorption capacity and could be a promising material for effective removal of MB dye from wastewater.

Highly selective electrosynthesis of H2O2 by N, O co-doped graphite nanosheets for efficient electro-Fenton degradation of p-nitrophenol

The activity and selectivity of the cathode towards electrosynthesis of H₂O₂ are critical for electro-Fenton process. Herein, nickel-foam modified with N, O co-doped graphite nanosheets (NO-GNSs/Ni-F) was developed as a cathode for highly efficient and selective electrosynthesis of H₂O₂. Expectedly, the accumulation of H₂O₂ at pH= 3 reached 494.2 mg L^-1 h^-1, with the selectivity toward H₂O₂ generation reaching 93.0%. The synergistic effect of different oxygen-containing functional groups and N species on the performance and selectivity of H₂O₂ electrosynthesis was investigated by density functional theory calculations, and the combination of epoxy and graphitic N (EP + N) was identified as the most favorable configuration with the lowest theoretical overpotential for H₂O₂ generation. Moreover, NO-GNSs/Ni-F was applied in the electro-Fenton process for p-nitrophenol degradation, resulting in 100% removal within 15 min with the kinetic rate constant of 0.446 min^-1 and 97.6% mineralization within 6 h. The efficient removal was mainly attributed to the generation of bulk ·OH. Furthermore, NO-GNSs/Ni-F exhibited excellent stability. This work provides a workable option for the enhancement of H₂O₂ accumulation and the efficient degradation of pollutants in electro-Fenton system.

Catalytic activity comparison of natural ferrous minerals in photo-Fenton oxidation for tertiary treatment of dyeing wastewater

Natural ferrous minerals are readily available and recyclable catalysts in photo-Fenton-like oxidation for wastewater treatment. In this work, typical ferrous oxide and sulfide minerals including magnetite, chalcopyrite, and pyrrhotite were exploited as catalysts in heterogeneous photo-Fenton oxidation for purification of biological effluent of dyeing wastewater. In a wide initial pH range (3.0~7.5), ferrous mineral-based heterogeneous photo-Fenton-like reactions were proven to be effective on the oxidation of recalcitrant pollutants. COD removals achieved 60.57%, 58.83%, and 57.41% using pyrrhotite, chalcopyrite, and magnetite, respectively, as catalyst under ultraviolet irradiation of 220~275 nm at H₂O₂ concentration of 9.8 mM. The corresponding COD removals were 51.75% and 34.09% with or without ferrous sulfate additions in UV/H₂O₂ systems. Minerals exhibited excellent stability and reusability with photo-catalytic activity reduction of less than 10% in the reuse of 5 cycles. Dissolved iron concentrations were determined to be 1.86 mg L^-1, 4.62 mg L^-1, and 7.53 mg L^-1 for magnetite, chalcopyrite, and pyrrhotite, respectively, at pH 3 and decreased to zero in neutral pH environment, which were much lower than those required for homogenous Fenton reaction. It was deduced that oxidation of recalcitrant pollutants was mainly catalyzed by Fe(II) on the mineral surface. The more reactive oxygen species such as hydroxyl radicals were resulted from the reaction of surface Fe (II) with H₂O₂, H₂O₂ photolysis, and charge separation of minerals under UV irradiation.