Adsorption of arsenic (III) from aqueous solution by a novel phosphorus-modified biochar obtained from Taraxacum mongolicum Hand-Mazz: Adsorption behavior and mechanistic analysis

Lanthanum-calcium bimetallic-modified attapulgite- chitosan hydrogel beads for efficient phosphate removal from water: Performance evaluation, mechanistic and life cycle assessment

Phosphorus is a critical factor in the control of eutrophication. We developed a three-dimensional porous, bimetallic-modified adsorbent La-Ca-CS/ATP to remove excess phosphate from water. Langmuir model showed that the theoretical adsorption capacity of La-Ca-CS/ATP was up to 123 mg P/g. The amount of La and Ca leached by La-Ca-CS/ATP was small, and the adsorption of 36.08 mg P/g was maintained during the five cycles of La-Ca-CS/ATP. The La-Ca-CS/ATP adsorption mechanism mainly involved surface precipitation, ligand exchange, electrostatic attraction, and inner-sphere complexation. Molecular dynamics demonstrated that La and Ca had complementary effects on binding sites and energy barriers within the range of 0.5-0.7 nm and 1.2-2 nm, enhancing the adsorption effect of La-Ca-CS/ATP. The life cycle assessment results showed that adding calcium could help reduce the environmental impact of lanthanum and chitosan. The production of La-Ca-CS/ATP adsorbed 73.88 P mg/g and emitted 24.73 kg CO2 eq, which was less than other adsorbents.

Novel chitosan-modified biochar prepared from a Chinese herb residue for multiple heavy metals removal: Characterization, performance and mechanism

In this study, the sorption properties of Cr(VI), As(III), and Pb(II) on chitosan-modified magnetic biochar (CMBC) derived from residues of Ligusticum chuanxiong Hort. were investigated. CMBC was found to be a valuable material for removing three heavy metals from water simultaneously. Kinetic analysis suggested Cr(VI), As(III), and Pb(II) were chemisorbed onto CMBC, while isotherm data conformed well to Langmuir model, the maximum adsorption capacity of CMBC was found to be 65.74 mg/g for Cr(VI), 49.32 mg/g for As(III), and 69.45 mg/g for Pb(II). Experiments, characterization, and density functional theory (DFT) calculations were employed to explore the mechanisms. Furthermore, CMBC demonstrated excellent removal rates of over 95% for Cr(VI), 99% for As(III) and Pb(II) from contaminated water bodies. This work shows that CMBC holds significant potential for wastewater treatment of heavy metals and provides an effective solution for the utilization of Chinese herb residues in environmental remediation.

Remediation of arsenic and fluoride from groundwater: a critical review on bioadsorption, mechanism, future application, and challenges for water purification

In the past few decades, the excessive and inadequate use of technological advances has led to groundwater contamination, mainly caused by organic and inorganic pollutants, which are highly harmful to human health, agriculture, water bodies, and aquaculture. Among all toxic pollutants, As and F- play a significant role in groundwater contamination due to their excellent reactivity with other elements. To mitigate the prevalence of arsenic and fluoride within the water system, the use of biochar gives an attractive strategy for removing them mainly because of the substantial surface area, pore size, pH, aromatic structure, and functional groups inherent in biochar, which are primarily dependent upon its raw material and pyrolysis temperature. Researcher develops different methods like physiochemical and electrochemical for treating arsenic and fluoride contamination. Among all removal methods, bioadsorption using agricultural waste residues shows effective/feasible removal of As and F- due to its low cost, ecofriendly nature, readily available, and efficient reuse compared with several other harmful synthetic materials that demand costly design specifications. This study discusses current developments in bioadsorption methods for As and F- that use agricultural-based biomaterials and describes the prevailing state of arsenic and fluoride removal strategies that use biomaterials precisely.

Fast and efficient As(III) removal from water by bifunctional nZVI@NBC

As a notable toxic substance, metalloid arsenic (As) widely exists in water body and drinking As-contaminated water for an extended period of time can result in serious health concerns. Here, the performance of nanoscale zero-valent iron (nZVI) modified N-doped biochar (NBC) composites (nZVI@NBC) activated peroxydisulfate (PDS) for As(III) removal was investigated. The removal efficiencies of As(III) with initial concentration ranging from 50 to 1000 μg/L were above 99% (the residual total arsenic below 10 μg/L, satisfying the contaminant limit for arsenic in drinking water) within 10 min by nZVI@NBC (0.2 g/L)/PDS (100 μM). As(III) removal efficiency influenced by reaction time, PDS dosage, initial concentration, pH, co-existing ions, and natural organic matter in nZVI@NBC/PDS system were investigated. The nZVI@NBC composite is magnetic and could be conveniently collected from aqueous solutions. In practical applications, nZVI@NBC/PDS has more than 99% As(III) removal efficiency in various water bodies (such as deionized water, piped water, river water, and lake water) under optimized operation parameters. Radical quenching and EPR analysis revealed that SO4·- and ·OH play important roles in nZVI@NBC/PDS system, and the possible reaction mechanism was further proposed. These results suggest that nZVI@NBC activated peroxydisulfate may be an efficient and fast approach for the removal of water contaminated with As(III).

Biochar and nano biochar: Enhancing salt resilience in plants and soil while mitigating greenhouse gas emissions: A comprehensive review

Salinity stress poses a significant challenge to agriculture, impacting soil health, plant growth and contributing to greenhouse gas (GHG) emissions. In response to these intertwined challenges, the use of biochar and its nanoscale counterpart, nano-biochar, has gained increasing attention. This comprehensive review explores the heterogeneous role of biochar and nano-biochar in enhancing salt resilience in plants and soil while concurrently mitigating GHG emissions. The review discusses the effects of these amendments on soil physicochemical properties, improved water and nutrient uptake, reduced oxidative damage, enhanced growth and the alternation of soil microbial communities, enhance soil fertility and resilience. Furthermore, it examines their impact on plant growth, ion homeostasis, osmotic adjustment and plant stress tolerance, promoting plant development under salinity stress conditions. Emphasis is placed on the potential of biochar and nano-biochar to influence soil microbial activities, leading to altered emissions of GHG emissions, particularly nitrous oxide(N2O) and methane(CH4), contributing to climate change mitigation. The comprehensive synthesis of current research findings in this review provides insights into the multifunctional applications of biochar and nano-biochar, highlighting their potential to address salinity stress in agriculture and their role in sustainable soil and environmental management. Moreover, it identifies areas for further investigation, aiming to enhance our understanding of the intricate interplay between biochar, nano-biochar, soil, plants, and greenhouse gas emissions.

Adsorption of acetochlor-contaminated water systems using novel P-doped biochar: Effects, application, and mechanism

Given the serious threat of acetochlor (ACT) to the aquatic ecological environment, designing wastewater treatment-oriented adsorbents for the sustainable remediation of actual ACT-contaminated water is a promising yet challenging strategy. Herein, a novel P-doped biochar (PBC-800) with a high adsorption capacity (51.34 mg g-1) and a rapid reaction rate (47.35 mg g-1 h-1) for ACT was prepared through pyrolyzing of rice straw biomass pre-impregnated with potassium dihydrogen phosphate (KH2PO4). Additionally, P-doped biochars synthesized at different pyrolysis temperatures exhibited significant variations in ACT adsorption performance, which was mainly ascribed to the distinction between hydrophilicity and sp2 conjugate C (ID/IG = 0.84-1.08). The adsorption behavior of ACT on PBC-800 followed the Elovich kinetics and Freundlich adsorption isotherm models. Thermodynamic calculations indicated that the adsorption of ACT by PBC-800 was a spontaneously disordered decreasing exothermic process. Besides, PBC-800 exhibited a powerful anti-interference for ACT adsorption within complex water matrices, highlighting its potential for various of practical applications. Through characterization analysis and further experiments, it was proved that the excellent adsorption performance of PBC-800 on ACT was ascribed to a combination of physical and chemical adsorption mechanisms, including 57.5% pore filling, 23.4% hydrophobic interaction, 12.7% π-π interaction, and 6.4% hydrogen bonding. Moreover, PBC-800 exerted a prominent adhesion impact upon Gram-positive and negative bacteria at 3 h. This study offers a new idea for the utilization of agricultural residues and provides insights into the mechanism of ACT adsorption through its derived biochar.

Visualizing the bibliometrics of biochar research for remediation of arsenic pollution

Arsenic-contamination of soil and water has always been a topic of considerable concern, and the potential of biochar for remediation of arsenic contamination has been widely recognized due to its advantages, including abundant sources, simple preparation, large surface area, significant pore size, and rich functional groups. To gain insights into the development trends in this field and provide suggestions for future research directions, scientometric analysis was conducted on articles sourced from the Web of Science core collection database by using the CiteSpace and VOSviewer software. In total, 637 bibliographic records, retrieved using the keywords "biochar" and "arsenic" were analyzed based on publication distribution over the years, contributing countries, keywords, authors, cited authors, publishing journals, and highly cited articles. Further, progress maps were generated from these data sets to assess the current research landscape. Results revealed a steady increase in annual publications since 2009, and China has the most publications. Notably, Daniel C. W. Tsang stood out as a representative author. The journal "Science of the Total Environment" published the most articles related to biochar and arsenic. "Adsorption" is the most frequently occurring keyword. The investigations of the impact and mechanism of biochar and modified biochar on inorganic arsenic removal from water and immobilization in soil have been identified as current research focal points. In order to realize the efficient and safe use of biochar, the future necessitates the implementation of advanced technology to conduct further comprehensive research. This study highlights the ongoing advancements in the research field on biochar and arsenic. Valuable insights are provided for future researchers and policymakers to guide their significant efforts toward addressing the issue of soil and water contamination caused by arsenic and exploring the potential of biochar for effective remediation strategies.

Exploring biochar and fishpond sediments potential to change soil phosphorus fractions and availability

Phosphorus (P) availability in soil is paradoxical, with a significant portion of applied P accumulating in the soil, potentially affecting plant production. The impact of biochar (BR) and fishpond sediments (FPS) as fertilizers on P fixation remains unclear. This study aimed to determine the optimal ratio of BR, modified biochar (MBR), and FPS as fertilizer replacements. A pot experiment with maize evaluated the transformation of P into inorganic (Pi) and organic (Po) fractions and their contribution to P uptake. Different percentages of FPS, BR, and MBR were applied as treatments (T1-T7), T1 [(0.0)], T2 [FPS (25.0%)], T3 [FPS (25.0%) + BR (1%)], T [FPS (25%) +MBR (3%)], T5 [FPS (35%)], T6 [FPS (35%) +BR (1%)], and T7 [FPS (35%) + MBR (1%)]. Using the modified Hedley method and the Tiessen and Moir fractionation scheme, P fractions were determined. Results showed that various rates of MBR, BR, and FPS significantly increased labile and moderately labile P fractions (NaHCO3-Pi, NaHCO3-Po, HClD-Pi, and HClC-Pi) and residual P fractions compared with the control (T1). Positive correlations were observed between P uptake, phosphatase enzyme activity, and NaHCO3-Pi. Maximum P uptake and phosphatase activity were observed in T6 and T7 treatments. The addition of BR, MBR, and FPS increased Po fractions. Unlike the decline in NaOH-Po fraction, NaHCO3-Po and HClc-Po fractions increased. All Pi fractions, particularly apatite (HClD-Pi), increased across the T1-T7 treatments. HClD-Pi was the largest contributor to total P (40.7%) and can convert into accessible P over time. The T5 treatment showed a 0.88% rise in residual P. HClD-Pi and residual P fractions positively correlated with P uptake, phosphatase activity, NaOH-Pi, and NaOH-Po moderately available fractions. Regression analysis revealed that higher concentrations of metals such as Ca, Zn, and Cr significantly decreased labile organic and inorganic P fractions (NaHCO3-Pi, R 2 = 0.13, 0.36, 0.09) and their availability (NaHCO3-Po, R 2 = 0.01, 0.03, 0.25). Excessive solo BR amendments did not consistently increase P availability, but optimal simple and MBR increased residual P contents in moderately labile and labile forms (including NaOH-Pi, NaHCO3-Pi, and HClD-Pi). Overall, our findings suggest that the co-addition of BR and FPS can enhance soil P availability via increasing the activity of phosphatase enzyme, thereby enhancing plant P uptake and use efficiency, which eventually maintains the provision of ecosystem functions and services.

Remediation of cadmium or arsenic contaminated water and soil by modified biochar: A review

Biochar has a high specific surface area with abundant pore structure and functional groups, which has been widely used in remediation of cadmium or arsenic contaminated water and soil. However, the bottleneck problem of low-efficiency of pristine biochar in remediation of contaminated environments always occurs. Nowadays, the modification of biochar is a feasible way to enhance the performance of biochar. Based on the Web of science™, the research progress of modified biochar and its application in remediation of cadmium or arsenic contaminated water and soil have been systematically summarized in this paper. The main modification strategies of biochar were summarized, and the variation of physicochemical properties of biochar before and after modification were illustrated. The efficiency and key mechanisms of modified biochar for remediation of cadmium or arsenic contaminated water and soil were expounded in detail. Finally, some constructive suggestions were given for the future direction and challenges of modified biochar research.

New trends on green energy and environmental technologies, with special focus on biomass valorization, water and waste recycling: editorial of the special issue

In this editorial piece, the Editors of the Virtual Special Issue (VSI) "New Trends on Green Energy and Environmental Technologies, with Special Focus on Biomass Valorization, Water and Waste Recycling", present summarized data corresponding to the accepted submissions, as well as additional comments regarding the thematic of the VSI. Overall, 83 manuscripts were received, with final publication of those having the highest quality, accepted after peer-reviewing. The Editors think that the result is a set of very interesting papers that increase the knowledge on the matter, and which would be useful for researchers and the whole society.

Herbal plants- and rice straw-derived biochars reduced metal mobilization in fishpond sediments and improved their potential as fertilizers

Fishpond sediments are rich in organic carbon and nutrients; thus, they can be used as potential fertilizers and soil conditioners. However, sediments can be contaminated with toxic elements (TEs), which have to be immobilized to allow sediment reutilization. Addition of biochars (BCs) to contaminated sediments may enhance their nutrient content and stabilize TEs, which valorize its reutilization. Consequently, this study evaluated the performance of BCs derived from Taraxacum mongolicum Hand-Mazz (TMBC), Tribulus terrestris (TTBC), and rice straw (RSBC) for Cu, Cr, and Zn stabilization and for the enhancement of nutrient content in the fishpond sediments from San Jiang (SJ) and Tan Niu (TN), China. All BCs, particularly TMBC, reduced significantly the average concentrations of Cr, Cu, and Zn in the overlying water (up to 51% for Cr, 71% for Cu, and 68% for Zn) and in the sediments pore water (up to 77% for Cr, 76% for Cu, and 50% for Zn), and also reduced metal leachability (up to 47% for Cr, 60% for Cu, and 62% for Zn), as compared to the control. The acid soluble fraction accounted for the highest portion of the total content of Cr (43-44%), Cu (38-43%), and Zn (42-45%), followed by the reducible, oxidizable, and the residual fraction; this indicates the high potential risk. As compared with the control, TMBC was more effective in reducing the average concentrations of the acid soluble Cr (15-22%), Cu (35-53%), and Zn (21-39%). Added BCs altered the metals acid soluble fraction by shifting it to the oxidizable and residual fractions. Moreover, TMBC improved the macronutrient status in both sediments. This work provides a pathway for TEs remediation of sediments and gives novel insights into the utilization of BC-treated fishpond sediments as fertilizers for crop production.

Effects of phosphorus-modified biochar as a soil amendment on the growth and quality of Pseudostellaria heterophylla

Phosphorus (P) deficiency in agricultural soil is a worldwide concern. P modification of biochar, a common soil conditioner produced by pyrolysis of wastes and residues, can increase P availability and improve soil quality. This study aims to investigate the effects of P-modified biochar as a soil amendment on the growth and quality of a medicinal plant (Pseudostellaria heterophylla). P. heterophylla were grown for 4 months in lateritic soil amended with P-modified and unmodified biochar (peanut shell) at dosages of 0, 3% and 5% (by mass). Compared with unmodified biochar, P-modified biochar reduced available heavy metal Cd in soil by up to 73.0% and osmotic suction in the root zone by up to 49.3%. P-modified biochar application at 3% and 5% promoted the tuber yield of P. heterophylla significantly by 68.6% and 136.0% respectively. This was different from that in unmodified biochar treatment, where tuber yield was stimulated at 3% dosage but inhibited at 5% dosage. The concentrations of active ingredients (i.e., polysaccharides, saponins) in tuber were increased by 2.9–78.8% under P-modified biochar amendment compared with control, indicating the better tuber quality. This study recommended the application of 5% P-modified biochar for promoting the yield and quality of P. heterophylla.

Remediation of emerging metal pollutants using environment friendly biochar- Review on applications and mechanism

Bioremediation of heavy metals has become a major environmental concern due to their bio resistant nature and tendency to accumulate. Application of various technologies, involving physical and chemical working principles are applied and passive uptake using sorption involving eco-friendly substrates gained significant attention. Biochar, a cheaper and efficient material, offers good potential due to the greater ease of production, treatment and disposal. This review focuses on the effective application of biochar to treat water contaminated by three specific heavy metals: chromium, lead and arsenic. The on-field applications like soil amendment, industrial wastewater treatment and groundwater treatment using biochar are highlighted. The review article describes the feedstock available for biochar production, various production processes and the importance of optimum conditions like pyrolysis temperature, rate and retention time for various feedstocks reported in literature. The energy requirement of the production process can be supplied by its own energy output. Various modifications that are suitable for the biochar from distinct feedstocks are also discussed. The removal performance of biochar at different working conditions like pH, initial concentration of pollutant and adsorbent dose are consolidated. The highest removal efficiencies reported were by coconut shell biochar (Cr - 99.9%), canola straw biochar (Pb - 100%) and perilla leaf biochar (As - 100%). The adsorption mechanism is explained with reference to kinetics, isotherms, and molecular dynamics. Adsorption mechanism of most of the biochars was found to fit either Freundlich or Langmuir isotherm.

Synthesis of Oxidant Functionalised Cationic Polymer Hydrogel for Enhanced Removal of Arsenic (III)

A cationic polymer gel (N-[3-(dimethylamino)propyl]acrylamide, methyl chloride quaternary)(DMAPAA-Q gel)-supported oxidising agent (KMnO₄ or K₂Cr₂O₇) was proposed to remove As from water. The gel could adsorb arsenite, As(III), and arsenate, As(V), through the ion exchange method, where the oxidising agent oxidised As(III) to As(V). theoretically speaking, the amount of oxidant in the gels can reach 73.7 Mol%. The maximal adsorption capacity of the D-Mn gel (DMAPAA-Q gel carrying MnO₄⁻) and D-Cr gel (DMAPAA-Q gel carrying Cr₂O₇²⁻) for As(III) could reach 200 mg g⁻¹ and 263 mg g⁻¹, respectively; moreover, the As(III) removal rate of the gels could still be maintained above 85% in a neutral or weak acid aquatic solution. Studies on the kinetic and adsorption isotherms indicated that the As adsorption by the D-Mn and D-Cr gels was dominated by chemisorption. The thermodynamic parameters of adsorption confirmed that the adsorption was an endothermic process. The removal of As is influenced by the co-existing high-valence anions. Based on these results, the gels were found to be efficient for the As(III) adsorption and could be employed for the As(III) removal from the industrial wastewater.

Preparation and characterization of magnetic modified bone charcoal for removing Cu2+ ions from industrial and mining wastewater

Heavy metal water pollution is an urgent global problem to be addressed. Copper ions are common toxic heavy metal pollutants in wastewater. In order to remove the excessive copper ions in wastewater, in this study, chicken bone charcoal was modified by sodium dodecyl sulfonate and combined with magnetic nanoparticles prepared with ferric chloride hexahydrate and ferrous sulfate heptahydrate to produce a high efficiency adsorbent. The characterization of the magnetically modified bone charcoal was analyzed by scanning electron microscopy, surface and porosity analyses, FTIR and thermogravimetric analysis. The optimal adsorption conditions of magnetically modified bone charcoal for Cu²⁺ were obtained through batch experiments. The highest removal rate and adsorption capacity of Cu²⁺ was 99.98% and 15.057 mg/g, respectively, when the pH was 3.0, adsorbent dosage was 0.2 g, initial concentration of the Cu²⁺ solution was 50 mg/L, and temperature was 25 °C. The adsorption process fitted well with the Langmuir isotherm and the pseudo-second-order kinetic model. The regeneration experiment indicated that M-SDS-BC-500 maintained a high removal rate after five repetitions. The results suggest that the adsorbent has wide application prospects.