Comparison of three explorative methods for identifying building surface materials contributing pollutants to stormwater

Releases of micropollutants from building surface materials into rainwater and snowmelt induced runoff

Building surface materials, exposed to wash-off by rainwater or snowmelt, are recognised as one of the significant urban diffuse pollution sources contributing to the impairment of stormwater quality. The pollution conveyed by roof runoff originates from two potential sources, migration of surface material constituents, or wash-off of pollutants deposited on the surface by atmospheric deposition. This study investigated the releases of metals and several groups of contaminants of emerging concern: alkylphenols, alkylphenol ethoxylates, and phthalates, from commercially available materials, which are commonly used on buildings and structure surfaces in the urban environment. The materials tested included the following: metal sheets of stainless steel, copper, zinc, galvanised steel, corten steel, corrugated and coated steel, coated zinc; and bitumen-based roofing felt and shingles, as well as polyvinyl chloride (PVC) from two manufacturers. The stainless steel was considered a control material serving to estimate pollutant contributions deposited on the pilot panels from the surrounding environment. Moreover, this study presents novel data on roof snowmelt induced runoff quality, not reported in the previous literature. The experimental setup consisted of 2-m² rectangular panels mounted in triplicates of each material and placed in an open-air setting on the campus of Luleå University of Technology, Sweden. Runoff leaving the gently sloping material panels was collected during 11 rain and three snowmelt driven runoff events occurring over a five-year period. The results showed that, in general, the micropollutant concentrations and loads were lower in snowmelt than rain induced runoff, and no decreasing trend was detected in the releases of phthalates or metals during the study period. Moreover, on a yearly basis, copper sheets were estimated to release 0.6 g/m² Cu to runoff, zinc and galvanised sheets 1.3 and 0.7 g/m² Zn, respectively, and, PVC sheets were estimated to release up to 78 mg/m² of diisononyl phthalate (DINP).

Microplastic: A particulate matter(PM) generated by deterioration of building materials

Particulate matter (PM), an inhalable material, is generated from various sources, including building materials. To maintain indoor air quality, it is necessary to analyze harmful substances and establish a method for their remediation. The purpose of this study is to identify the particles generated during the deterioration of building materials and analyze the composition of fine dust particles with respect to the degree of deterioration. The concentration of particles generated was analyzed using an SPS30 PM sensor in the built chamber. PM10 and PM2.5 levels of the maximum of 41.95 mg/m³ and 20.63 mg/m³, respectively, were generated from the tested building materials. The components of the collected PM were carbon, hydrogen, and silicon, among others, which are high-molecular-weight compounds. Particles of size 2.5 µm or less were detected, and the possibility of generating nanoplastics was investigated.