Waste management in the mining industry of metals ores, coal, oil and natural gas - A review

Dendroremediation of soil contaminated by mining sludge: A three-year study on the potential of Tilia cordata and Quercus robur in remediation of multi-element pollution

The vast amounts of mining and metallurgical wastes containing unimaginable quantities of toxic metal(loid)s require searching for managed ways. The study aimed to long-term assess the growth, elements accumulation (As, Cd, Hg, In, Mn, Mo, Pb, Sb, Sn, Ti, Tl, Zn) and proline content in 2-year-old Tilia cordata Mill. and Quercus robur L. seedlings growing under 1 and 3% extremely polluted mining sludge (MS) after 1, 2 and 3 years. Both species were able to grow efficiently without significant differences resulting from the impact of MS. The overall rise was higher for T. cordata than for Q. robur. The accumulation ability for As, Hg, In, Mn, Mo, Pb, Ti, and Zn in the whole plant was significantly higher for T. cordata, while Cd, Sb, Sn and Tl did not differ considerably between species. The highest content was found for As, Mn and Zn (68.7, 158, and 157 mg per plant, respectively) for T. cordata after 3 years of growth. The calculated Bioconcentration Factors were the highest for Cu (1.23), In (6.86), and Zn (38.4) for Q. robur, as well as for As (1.55), Hg (3.24), Mn (32.8), Mo (1.64) and Ti (18.0) for T. cordata after 3 years. The highest Translocation Factors were observed for In (1.35) and Sn (1.25) after 3 years, as well as for Mn (2.72, 3.38, and 3.03 after 1, 2, and 3 years) for Q. robur seedlings. The proline content was higher for Q. robur, regardless of which organ was examined, and the differences increased with the time of the experiment and the amount of MS addition (possibly more sensitive to stress). Young T. cordata seedlings show much greater potential than Q. robur. This is the first time that a demonstration of the high potential of long-living trees in multi-element MS remediation has been described.

Investigation of arsenic contamination in soil and plants along the river of Xinzhou abandoned gold mine in Qingyuan, China

The exploitation of mineral resources is very important for economic development, but disorderly exploitation poses a serious threat to the ecological environment. However, investigations on the advantages of plant species and environmental pollution in polluted mining areas are limited. Thus, a survey was conducted to evaluate the impacts of abandoned mines on the surrounding ecological environment along rivers in polluted areas and to determine the Arsenic (As) pollution status in soil and plants. The results showed that the soil and vegetation along the river in the survey area were seriously polluted by As. The total As content of the 15 samples was significantly greater than the national soil background value (GB 15618-2018), and degree of pollution was nonlinearly related to the distance from the mine source, R2 = 0.9844. B. bipinnata, P. vittata and B. nivea were predominant with degrees of dominance of 0.01-0.33, 0.05-0.11, and 0.06-0.14 respectively. The As enrichment capacities of Juncus and P. vittata were significantly greater than those of the other plants, while the bioaccumulation factors (BCFs) were 21.81 and 7.04, respectively.

Enhanced gas separation performance for H2 purification using MIL-68(ln)-nh2/PES mixed-matrix membranes

The growing demand for sustainable and efficient gas separation technologies has prompted the exploration of advanced materials to enhance the gas permeability and selectivity. Polyethersulfone (PES) membranes are widely used in gas separation, gas upgrading, and clean energy production owing to their environmental friendliness and low cost. However, their gas permeability and selectivity can be further improved for commercial application. This study explored the incorporation of 10 wt % of MIL-68(ln)-NH2 into PES membranes using a phase-inversion approach to enhance gas permeability and selectivity. The morphological, structural, and thermal properties of the resulting MOF/PES membrane were characterized using SEM, AFM, BET, XRD, FTIR, and TGA-DTG. Gas permeation experiments were conducted using different gases (CO2, N2, CH4, and H2) under different heating conditions (20-60 °C) to evaluate the gas permeability and selectivity of the MOF/PES membrane. The results showed that the incorporation of MOF into the mixed matrix membrane (MMMs) led to a 9% increase in porosity, 87% reduction in roughness, and 32% decrease in pore size compared to neat PES membranes. Significant changes in the morphology, crystallinity, and thermal stability were observed, with notable improvements of up to 22%. Moreover, the MOF/PES membrane exhibited high gas permeability (CO2 = 124656, N2 = 83650, CH4 = 159298, and H2 = 427075 Barrer) and selectivity (H2/N2 = 5.7, H2/CO2 = 4, CH4/N2 = 2, and CH4/CO2 = 1.7) for flammable gases. The optimal gas separation performance was observed at 20 °C and 60 °C for H2/N2 and H2/CO2 separation, respectively. These findings demonstrate the potential of MOF-based PES membranes for gas separation applications, particularly in H2 purification.

Geochemical properties, heavy metals and soil microbial community during revegetation process in a production Pb-Zn tailings

Lead-zinc (Pb-Zn) tailings pose a significant environmental threat from heavy metals (HMs) contamination. Revegetation is considered as a green path for HM remediation. However, the interplay between HM transport processes and soil microbial community in Pb-Zn tailings (especially those in production) remain unclear. This study investigated the spatial distribution of HMs as well as the crucial roles of the soil microbial community (i.e., structure, richness, and diversity) during a three-year revegetation of production Pb-Zn tailings in northern Guangdong province, China. Prolonged tailings stockpiling exacerbated Pb contamination, elevating concentrations (from 10.11 to 11.53 g/kg) in long-term weathering. However, revegetation effectively alleviated Pb, reducing its concentrations of 9.81 g/kg. Through 16 S rRNA gene amplicon sequencing, the dominant genera shifted from Weissella (44%) to Thiobacillus (17%) and then to Pseudomonas (comprising 44% of the sequences) during the revegetation process. The structural equation model suggested that Pseudomonas, with its potential to transform bioavailable Pb into a more stable form, emerged as a potential Pb remediator. This study provides essential evidence of HMs contamination and microbial community dynamics during Pb-Zn tailings revegetation, contributing to the development of sustainable microbial technologies for tailings management.

Desorption kinetic and sequential extraction of Pb and Zn in a contaminated soil amended with phosphate, lime, biochar, and biosolids

The mining and metallurgical industry sector activities often release potential toxic elements (PTE) surrounding exploitation area. We evaluated the addition of phosphate and lime using the dosage of 0.5:1, 1:1, and 2:1 molar ratio of PO43- and CO32- to the sum of PTE, respectively, and also, biochar and biosolids using the dosage of 2.5, 5, and 10% (m:m) to immobilize PTE in contaminated forest soil (Pb (270 mg kg-1) and Zn (858 mg kg-1)) near an abandoned mine site in Brazil. The desorption by stirred flow kinetics revealed that 15% of the total Zn and 12% Pb contents are mobile before any amendment application. Phosphate amendment decreased Pb desorption but increased Zn desorption. Biochar and biosolids immobilize high amounts of Zn and Pb because of their high cation exchange capacities and alkaline properties; however, 20% biosolid dose increased Pb desorption. X-ray absorption spectroscopy suggested Zn-kerolite as the major species in the contaminated soil, likely from mine dust. The change in Zn speciation after soil amendment addition indicated that biochar and lime kept a high proportion of Zn-Al species, whereas phosphate and biosolids led to more Zn-Fe species. Our results pointed out that lime might reduce both Pb and Zn mobilities; however, field trials are crucial to confirm the immobilization efficiency of lime and other amendments over long term.

A critical review on the migration and transformation processes of heavy metal contamination in lead-zinc tailings of China

The health risks of lead-zinc (Pb-Zn) tailings from heavy metal (HMs) contamination have been gaining increasing public concern. The dispersal of HMs from tailings poses a substantial threat to ecosystems. Therefore, studying the mechanisms of migration and transformation of HMs in Pb-Zn tailings has significant ecological and environmental significance. Initially, this study encapsulated the distribution and contamination status of Pb-Zn tailings in China. Subsequently, we comprehensively scrutinized the mechanisms governing the migration and transformation of HMs in the Pb-Zn tailings from a geochemical perspective. This examination reveals the intricate interplay between various biotic and abiotic constituents, including environmental factors (EFs), characteristic minerals, organic flotation reagents (OFRs), and microorganisms within Pb-Zn tailings interact through a series of physical, chemical, and biological processes, leading to the formation of complexes, chelates, and aggregates involving HMs and OFRs. These interactions ultimately influence the migration and transformation of HMs. Finally, we provide an overview of contaminant migration prediction and ecological remediation in Pb-Zn tailings. In this systematic review, we identify several forthcoming research imperatives and methodologies. Specifically, understanding the dynamic mechanisms underlying the migration and transformation of HMs is challenging. These challenges encompass an exploration of the weathering processes of characteristic minerals and their interactions with HMs, the complex interplay between HMs and OFRs in Pb-Zn tailings, the effects of microbial community succession during the storage and remediation of Pb-Zn tailings, and the importance of utilizing process-based models in predicting the fate of HMs, and the potential for microbial remediation of tailings.

Intuitionistic fuzzy-based entropy weight method-TOPSIS for multi-attribute group decision-making in drilling fluid waste treatment technology selection

Drilling fluid waste is produced by oil and gas industry operations and can potentially cause serious environmental pollution and energy consumption if not properly treated. Currently, there are several treatment methods available for drilling fluid waste such as bioremediation, thermal treatment, solidification/stabilization treatment, electrochemical remediation, physiochemical treatment, and supercritical fluid treatment. However, selecting an adequate method to treat drilling fluid waste is a critical consideration. The objective of this work is to analyze the problem of drilling fluid waste pollution and treatment methods, establish a drilling fluid waste treatment decision index system that takes into account various factors, and apply the intuitionistic fuzzy-based entropy weight method (EWM)-technique for order of preference by similarity to ideal solution (TOPSIS) method to make a multi-attribute group decision on drilling fluid waste treatment methods. The method is then applied to the WBQ004-1-H1 drilling project as an example for comprehensive analysis. The final decision results show that A3 (0.566) > A1 (0.537) > A6 (0.526) > A5 (0.485) > A4 (0.478) > A2 (0.447), so the solidification/stabilization treatment is the most suitable method for this project, providing new insights into selecting drilling fluid waste treatment methods in actual projects.

Recent Advances on Porous Siliceous Materials Derived from Waste

In recent years, significant efforts have been made in view of a transition from a linear to a circular economy, where the value of products, materials, resources, and waste is maintained as long as possible in the economy. The re-utilization of industrial and agricultural waste into value-added products, such as nanostructured siliceous materials, has become a challenging topic as an effective strategy in waste management and a sustainable model aimed to limit the use of landfill, conserve natural resources, and reduce the use of harmful substances. In light of these considerations, nanoporous silica has attracted attention in various applications owing to the tunable pore dimensions, high specific surface areas, tailorable structure, and facile post-functionalization. In this review, recent progress on the synthesis of siliceous materials from different types of waste is presented, analyzing the factors influencing the size and morphology of the final product, alongside different synthetic methods used to impart specific porosity. Applications in the fields of wastewater/gas treatment and catalysis are discussed, focusing on process feasibility in large-scale productions.

Toward sustainable reprocessing and valorization of sulfidic copper tailings: Scenarios and prospective LCA

There has been increasing attention recently to reprocessing of mining waste, which aims to recover potentially valuable materials such as metals and other byproducts from untapped resources. Mining waste valorization may offer environmental advantages over traditional make-waste-dispose approaches. However, a quantitative environmental assessment for large-scale reprocessing, accounting for future trends and a broad set of environmental indicators, is still lacking. This article assesses the life cycle impacts and resource recovery potential associated with alternative waste management through mine tailings reprocessing at a regional scale. Sulfidic copper tailings in the EU were selected as a case study. We perform prospective life cycle assessments of future reprocessing scenarios by considering emerging resource recovery technologies, market supply & demand forecasts, and energy system changes. We find that some reprocessing and valorization technologies in future scenarios may have reduction potentials for multiple impact indicators. However, results for indicators such as climate change and energy-related impacts suggest that specific scenarios perform sub-optimally due to energy/resource-intensive processes. The environmental performance of reprocessing of tailings is influenced by technology routes, secondary material market penetration, and choices of displaced products. The trade-off between climate change and energy related impacts, on the one hand, and toxicity impacts, on the other hand, requires critical appraisal by decision makers when promoting alternative tailings reprocessing. Implementing value recovery strategies for building material production, can save up to 3 Mt. CO₂-eq in 2050 compared to business as usual, helping the copper sector mitigate climate impacts. Additional climate mitigation efforts in demand-side management are needed though to achieve the 1.5 °C climate target. This work provides a scientific basis for decision-making toward more sustainable reprocessing and valorization of sulfidic tailings.

Industrial Waste Pretreatment Approach for 3D Printing of Sustainable Building Materials

The large volume of industrial by-products and wastes from the construction, timber and paper industries has become a serious challenge worldwide. Recycling these industrial wastes as functional materials in the construction industry is an efficient approach for sustainable development. This study presents a pretreatment approach for recycling construction and demolition waste (CDW) and industrial side-streams (such as green liquor sludge, fiber waste, flotation sand and fly ash) in order to produce a geopolymer for the 3D printing of construction materials. A treatment approach was developed for screening the residues from CDW with a maximum size of 16 mm and for a combined line treatment for industrial side streams. The treatment processes utilized suitable and economical separation techniques for the recycling of waste materials. The crushing of the screened residues resulted in a homogeneous material size that facilitates the separation of mixed wastes and simplifies the classification of materials. The combined plant enabled the cost-effective treatment of various industrial wastes in a single process unit. The results show that the economic and environmental impact of the chosen techniques, in terms of their energy consumption, is highly dependent on the treatment line, separation technique and quantity of the individual waste that is processed. These recycled industrial wastes can be used as sustainable materials for the production of geopolymer concrete, contributing to the sustainability of the construction industry.

Soil Risk Assessment in the Surrounding Area of Hulene-B Waste Dump, Maputo (Mozambique)

Soil contamination in areas close to unplanned dumpsites represents an increasing risk to the ecosystems and human health. This study aimed to evaluate soil quality in the area surrounding the Hulene-B waste dump, Maputo, Mozambique, and to estimate potential ecological and human health risks. A total of 71 surface soil samples were collected in the surrounding area of the dump, along with 10 samples in areas considered not impacted by the dump. Chemical and mineralogical analyses were performed using XRF and XRD. Quartz was the most abundant mineral phase, followed by feldspars, carbonates, clay minerals, and Fe oxides/hydroxides. Results showed a significant contribution to ecological degradation by PTE enrichment, ranked as Zn >> Cu > Cr > Zr > Pb > Ni > Mn. Carcinogenic risk for both children and adults was significant due to Pb soil content. Soil sample concentrations of Cr, Cu, Mn, Ni, Pb, Zn, and Zr, posing a risk especially in children, suggested the need for continuous monitoring, as well as the definition and implementation of mitigation measures.

Investigation of Pyrolysis and Mild Oxidation Characteristics of Tar-Rich Coal via Thermogravimetric Experiments

Tar-rich coal has the potential to substitute the supply of oil-gas resources, which is abundant in China. The effective conversion of tar-rich coal into oil-gas products can promote coal utilization, reduce resource wastage, alleviate environmental pollution, and benefit carbon neutrality. Nevertheless, less work, if any, has been performed on the pyrolysis and mild oxidation behaviors of tar-rich coal in Northwestern China. The influences of limited oxygen addition and an extremely low heating rate on the micromorphology of the residual semi-coke are yet to be fully understood. Here, an experimental study on the pyrolysis and mild oxidation characteristics of tar-rich coal was conducted by the thermogravimetric analysis method, with further elucidation of the physical-chemical properties of the residual semi-coke. Experimental results show that an increase in the ultimate temperature of pyrolysis leads to a decline in the residue mass, while the mass loss from 500 to 550 °C presents the maximum elevation. Volatile matter is inclined to discharge from a certain direction, and the pores formed in various directions hold different possibilities. The organic components undergo both pyrolysis and slow oxidation with limited oxygen in the heating medium. Compared with an inert atmosphere, the mass loss under conditions of a small amount of O₂ is brought forward but prolonged. Compared with a N₂ atmosphere, the oxidation reactions of tar-rich coal are weakened in the presence of CO₂. A large decrease in the heating rate exerts an unfavorable effect on the production of total volatiles. An extremely low heating rate possibly brings about a change in the mechanism of chemical bond cracking during pyrolysis. More pores can be yielded in tar-rich coal with an increase in the heating rate, and the morphology of the residual semi-coke after pyrolysis is susceptible to the heating rate. The present study offers an improved understanding of the pyrolysis characteristics of tar-rich coal as well as insights into the efficient utilization of tar-rich coal.

Response Surface Methodology Analysis of the Effect of the Addition of Silicone Oil on the Transfer of Carbon Dioxide during Bioleaching of Mining Tailings by Native Microorganisms

The bioleaching of manganese present in mining waste after metal extraction can be catalyzed by Leptospirillum (L.) ferriphilum by allowing atmospheric carbon dioxide to be used in this autotrophic process and generating the subsequent recovery of silver. Bioleaching of metals is widely performed in agitated tanks; therefore, it is important to assess the mass transfer capacity of gaseous substrates, such as carbon dioxide, during the microbial processes. The main objective of this research was to evaluate the effects of the presence and concentration of a transfer vector (silicone oil) added into a stirred-tank bioreactor during bioleaching of mining tailings catalyzed by L. ferriphilum, determined by the combined gas/oil mass transfer coefficient of carbon dioxide (kLaCO2) into the aqueous phase. The experiments were carried out following a Box–Behnken experimental design, evaluating the concentrations of mining waste (30%, 40%, and 50%), Fe2+, serving as electron donor (2, 8, and 14 g/L), and silicon oil (0%, 5%, and 10%). A significant increase in kLaCO2 was observed after the addition of the transfer vector by comparing the lowest kLaCO2 value of 1.68 h−1 (obtained at 50% pulp, 8 g/L Fe2+, and 0% silicone oil) and the highest kLaCO2 of 21.81 h−1 (obtained at 30% pulp, 2 g/L Fe2+, 5% silicone oil). The results showed statistically significant differences in the transfer of carbon dioxide during the bioleaching process with a transfer vector.

Reutilisation of Water Contaminated by Mining Waste for the Encapsulation of Potentially Toxic Elements

Mining activities are essential for a population’s development; however, they also produce negative effects such as the production of waste, an impact on flora and water pollution. On the other hand, construction is one of the sectors which is most demanding of raw materials, with one of the main such materials being water. For this reason, this research evaluates the feasibility of incorporating water contaminated by mining waste into ceramic materials for bricks. In this way, the use of water is reduced and, on the other hand, the contaminating elements of the mining water are encapsulated in the ceramic matrix. To achieve this, the clay used and the contaminated water were first analysed, then different families of samples were conformed with different percentages of contaminated water. These samples were tested to determine their physical and mechanical properties. At the same time, leachate tests were carried out to determine that the ceramic material created did not cause environmental problems. The test results showed that the physical and mechanical properties of the ceramics were not influenced by the addition of contaminated water. On the other hand, the leachate tests showed that encapsulation of most of the potentially toxic elements occurred. However, the use of contaminated water as mixing water for ceramics could only be performed up to 60%, as higher percentages would leach impermissible arsenic concentrations. Accordingly, a new way of reusing water contaminated by mining activities is developed in this study, taking advantage of resources, avoiding environmental pollution and creating economic and environmentally friendly end products.