Sewage sludge treatment methods and P-recovery possibilities: Current state-of-the-art

Temporal trends of polycyclic aromatic hydrocarbons in soils amended with sludge, compost, and manure in a Scotland pasture: An 8-year field experiment

To optimize the effective utilization of organic waste in agricultural practices, a comprehensive assessment of associated risks and benefits is crucial. This study investigated the impact of three types of organic wastes (sludge, compost, and manure) on polycyclic aromatic hydrocarbons (PAHs) in contaminated soil in a Scottish pasture. The experimental setup comprised 16 plots with four treatments (compost, manure, sludge, and inorganic fertilizer) and four replicates. After eight years of this study, notable disparities in ΣPAH16 concentrations were observed among the different treatments, with compost-amended soil at 378 μg kg-1, sludge-amended soil at 331 μg kg-1, and manure-amended soil at 223 μg kg-1. The concentrations of ΣPAH16 in soil amended with compost and sludge exhibited a linear increase with extended sampling time. Significant changes in ΣPAH16 concentration were evident in the compost treatment plot, with an increase of 20% in the first year and 82% in the eighth year. Risk assessment suggested a low level of health risk from exposure to PAHs at the measured concentrations in the three organic wastes. In conclusion, this study highlights the importance of considering the effects of organic waste amendments on soil PAH levels to make informed decisions in sustainable agricultural practices. It also underscores the need for ongoing research to fully understand the implications of different organic waste applications on soil health and environmental quality.

Potential for nutrients reuse, carbon sequestration, and CO2 emissions reduction in the practice of domestic and industrial wastewater recycling into agricultural soils: A review

This review assesses the feasibility of reusing treated wastewater for irrigation in agricultural soils as a strategy for nutrients recycling and mitigation of CO2 emissions. Through a literature review, it was examined wastewater sources enriched with carbon and nutrients, including municipal wastewater and associated sludge, vinasse, swine wastewater, as well as wastewater from the food industry and paper and pulp production. The review also explores the dynamics of organic matter within the soil, discussing the aspects related to its potential conversion to CO2 or long-term storage. It was found that industrial wastewaters, owing to their higher organic matter and recalcitrance, exhibit greater potential for carbon storage. However, the presence of pollutants in wastewater necessitates careful consideration, particularly concerning their impact on soil quality. Toxic metals, microplastics, and organic compounds emerged as significant contaminants that could accumulate in the soil, posing risks to ecosystem health. To mitigate the environmental impacts, it was evaluated various wastewater treatment technologies and their associated carbon emissions. While advanced treatments may effectively reduce the contaminant load and mitigate soil impacts, their adoption is often associated with an increase in CO2 emissions. Membrane bioreactors, microfiltration, ultrafiltration, and up-flow anaerobic sludge blanket reactors were identified as promising technologies with lower carbon footprints. Looking ahead, future research should aim to enhance the understanding of carbon dynamics in soil and validate the environmental impacts of treated wastewater disposal. Despite remaining uncertainties, the literature indicates a positive outlook for wastewater recycling in soil, offering a viable strategy for carbon storage and mitigation of greenhouse gas emissions.

Sewage sludge management and enhanced energy recovery using anaerobic digestion: an insight

Sewage sludge (SS) is a potential source of bioenergy, yet its management is a global concern. Anaerobic digestion (AD) is applied to effectively valorize SS by reclaiming energy in the form of methane. However, the complex floc structure of SS hinders hydrolysis during AD process, thus resulting in lower process efficiency. To overcome the rate-limiting hydrolysis, various pre-treatment methods have been developed to enhance AD efficiency. This review aims to provide insights into recent advancements in pre-treatment technologies, including mechanical, chemical, thermal, and biological methods. Each technology was critically evaluated and compared, and its relative worth was summarized based on full-scale applicability, along with economic benefits, AD performance improvements, and impact on digested sludge. The paper illuminates the readers about existing research gaps, and the future research needed for successful implementation of these approaches at full scale.

Influence of policymakers and civil society stakeholders on sewage sludge management strategies: Empirical results from European utilities

Sewage sludge management is crucial for water utilities to move towards a circular valorisation of resources. The current literature focuses mainly on the technological aspects of sludge management strategies. However, the current discussion of these strategies does not consider possible pressures arising from the utilities' civil society stakeholders and from policymakers. To fill this gap, this paper develops a conceptual framework, based on the current literature, that identifies the utility's key decisions on sludge management strategies (valorisation route, overperformance and vertical integration), and links them to possible pressures arising from civil society and existing regulations. Subsequently, the study validates the framework through a multiple explanatory case study, investigating the empirical relevance of such pressures in six water utilities across Europe. The influence of citizens and municipalities is found to be crucial in the choice of sludge valorisation routes. Economic instruments, command and control instruments and, new to the literature, regulatory uncertainty are found to be key policy features influencing utilities' decisions on sludge management. The paper provides a first-of-its-kind investigation that highlights the mechanisms through which policymakers and civil society stakeholders shape utilities' sewage sludge management strategies. The results complement and extend existing theoretical knowledge on the role of institutional pressures in the implementation of sustainable environmental systems.

The state of the art in biosolids gasification

Biosolids is a by-product of wastewater treatment that needs to be further processed. Traditional biosolids treatment and disposal technologies are inefficient under the current demanding standards. Thermochemical conversion technologies have been employed for biosolids management, with gasification being the most promising due to the production of syngas, a gaseous product that may be used for the production of energy or high-added-value substances through reforming reactions. Gasification is a complex thermochemical process; its performance and yield are strongly affected by the type of feedstock, but also by the system configuration and process conditions. Gasification usually takes place at temperatures between 700 and 1,200 °C, but it may also occur at lower temperatures (above 375 °C: supercritical water gasification) or at higher temperatures (above 3,000 °C: plasma gasification). The present review briefly presents the biosolids management practices, focusing on the gasification process and syngas treatment, while the state of the art in biosolids gasification is critically presented and discussed. A number of types of gasifiers (more frequently fluidized bed, but also fixed bed, rotary kiln, downdraft, etc.), gasifying agents, and operational conditions have been used for biosolids gasification. The key results of the study regarding biosolids gasification are: (i) the increase of temperature and equivalence ratio enhances the gasification performance, resulting in high syngas yield and quality, high cold gas efficiency, and low tar and char production; (ii) the calorific value of the obtained syngas tends to decrease with the increase of equivalence ratio; and (iii) the use of catalysts has been proven to substantially improve the gasification performance, compared to non-catalytic gasification. The proper selection of technical parameters determines the effectiveness of biosolids gasification, which is considered as a promising technology for the energy recovery from biosolids, so to upgrade wastewater treatment and improve environmental quality.

Evaluation of the Effectiveness of Innovative Sorbents in Restoring Enzymatic Activity of Soil Contaminated with Bisphenol A (BPA)

As part of the multifaceted strategies developed to shape the common environmental policy, considerable attention is now being paid to assessing the degree of environmental degradation in soil under xenobiotic pressure. Bisphenol A (BPA) has only been marginally investigated in this ecosystem context. Therefore, research was carried out to determine the biochemical properties of soils contaminated with BPA at two levels of contamination: 500 mg and 1000 mg BPA kg-1 d.m. of soil. Reliable biochemical indicators of soil changes, whose activity was determined in the pot experiment conducted, were used: dehydrogenases, catalase, urease, acid phosphatase, alkaline phosphatase, arylsulfatase, and β-glucosidase. Using the definition of soil health as the ability to promote plant growth, the influence of BPA on the growth and development of Zea mays, a plant used for energy production, was also tested. As well as the biomass of aerial parts and roots, the leaf greenness index (SPAD) of Zea mays was also assessed. A key aspect of the research was to identify those of the six remediating substances-molecular sieve, zeolite, sepiolite, starch, grass compost, and fermented bark-whose use could become common practice in both environmental protection and agriculture. Exposure to BPA revealed the highest sensitivity of dehydrogenases, urease, and acid phosphatase and the lowest sensitivity of alkaline phosphatase and catalase to this phenolic compound. The enzyme response generated a reduction in the biochemical fertility index (BA21) of 64% (500 mg BPA) and 70% (1000 mg BPA kg-1 d.m. of soil). The toxicity of BPA led to a drastic reduction in root biomass and consequently in the aerial parts of Zea mays. Compost and molecular sieve proved to be the most effective in mitigating the negative effect of the xenobiotic on the parameters discussed. The results obtained are the first research step in the search for further substances with bioremediation potential against both soil and plants under BPA pressure.

Co-pyrolysis of fly ash with sewage sludge for PCDD/F removal

Fly ash generated from municipal waste incineration (MWI) contains various toxic substances, and it has to be properly treated before disposal or reuse. Water washing and thermal pyrolysis can improve the destruction efficiency of PCDD/Fs in fly ash generated from municipal solid waste incinerators. Since sulfur oxides and nitrogen compounds generated by the heating of the sewage sludge poison the catalytic active sites for PCDD/Fs formation on fly ash surface, co-pyrolysis of fly ash with sewage sludge effectively inhibits precursor formation and de novo synthesis reaction, resulting in the great reduction of PCDD/F formation. The results of the pyrolysis at 350 °C show that the PCDD/Fs removal efficiencies based on mass concentration are over 99%. The results at 350 °C of different reaction times show that the reaction time of 10 min is sufficient to reach the European End of Waste criteria (≤ 20 pg TEQ/g) when the ratio of fly ash/sewage sludge is controlled at 1:1.

Assessment of three different approaches for integrating phosphorus recovery from sewage sludge and derived products in existing wastewater treatment plants

Three different technological solutions, namely acidogenic fermentation and chemical extraction (alkaline or acidic), followed by precipitation with 1% Ca(OH)2, were investigated in the view of integrating phosphorus recovery into existing wastewater treatment plants. Experiments were conducted at the lab-scale using (i) sludge taken from biologically and chemically promoted phosphorus removal activated sludge processes and (ii) ashes obtained from sludge muffle incineration. Results highlighted the benefits of enhanced biological phosphorus removal (EBPR) systems rather than chemically promoted phosphorus removal in not only phosphorus extraction (up to 40% with EBPR) and recovery directly from secondary sludge (P precipitation between 66 and 92%), but after sludge incineration as well (P extraction up to 96% and precipitation above 96%). Acidogenic fermentation ensured the highest phosphorus release from EBPR sludge (equal to a concentration in solution of 122 mg/L P-PO43-), while the derived ashes had a lower level of metal contamination (particularly Fe and Al content < 2%). The phosphorus-rich product obtained by means of the recovery process showed relevant metal contamination (Cu, Zn, and Ni) under some operating conditions, suggesting the need for further treatments.

Absorbing oxygen carriers promotes phosphorus recovery from sludge via the microwave thermal conversion process

This study aims to apply the Absorbing oxygen carriers (AOCs) to induce the migration and transformation of phosphorus compounds during the microwave thermal conversion of sludge so the hard-to-extract organic phosphorus (OP) can be converted to easy-to-extract inorganic phosphorus (IP) and be enriched onto the sludge char. The AOCs were recycled by screen separation from the IP-rich sludge char, with the latter being a renewable phosphorus source from sludge. The AOCs in this novel process enhanced the conversion efficiency of OP into non-apatite inorganic phosphorus (NAlP), which was further converted to apatite inorganic phosphorus (AP). Most phosphorus in the sludge char is presented in the form of orthophosphate.

PFAS fate using lysimeters during degraded soil reclamation using biosolids

Carbon- and nutrient-rich biosolids are used in agriculture and land reclamation. However, per- and polyfluoroalkyl substances (PFAS) typically present in biosolids raise concerns of PFAS leaching to groundwater and plant uptake. Here, we investigated PFAS persistence and leaching from biosolids applied to a site constructed artificially to mimic degraded soils. Treatments included biosolids and biosolids blended with mulch applied at different rates to attain either one and five times the agronomic N rate for vegetable crops and a control treatment with synthetic urea and triple superphosphate fertilizer. Leachates were collected for a 2-year period from 15-cm depth zero-tension drainage lysimeters. Soils were analyzed post biosolids application. PFAS were quantified using isotope-dilution, solid-phase extraction and liquid chromatography tandem mass spectrometry. Leachate profiles exemplified an initial high total PFAS concentration, followed by a sharp decline and subsequent small fluctuations attributed to pre-existing soil conditions and rainfall patterns. Quantifiable PFAS in leachate were proportional to biosolids application rates. Short-chain perfluoroalkyl acids (CF2 < 6) were dominant in leachate, while the percentage of longer chains homologues was higher in soils. A 43% biosolids blend with mulch resulted in 21% lower PFAS leachate concentrations even with the blend application rate being 1.5 times higher than biosolids due to the blend's lower N-content. The blending effect was more pronounced for long-chain perfluoroalkyl sulfonic acids that have a greater retention by soils and the air-water interface. Biosolids blending as a pragmatic strategy for reducing PFAS leachate concentrations may aid in the sustainable beneficial reuse of biosolids.

Pyrolysed sewage sludge for metal(loid) removal and immobilisation in contrasting soils: Exploring variety of risk elements across contamination levels

Efficient treatment of sewage sludge may transform waste into stable materials with minimised hazardous properties ready for secondary use. Pyrolysed sewage sludge, sludgechar, has multiple environmental benefits including contaminant sorption capacity and nutrient recycling. The properties of five sludgechars were tested firstly for adsorption efficiency in laboratory solutions before prospective application to soils. A wide variety of metal(loid)s (As, Cd, Co, Cr, Cu, Ni, Pb, Sb, and Zn) was involved. Secondly, the sludgechars (3 % v/v) were incubated in five soils differing in (multi)-metal(loid) presence and the level of contamination. The main aim was to evaluate the metal(loid) immobilisation potential of the sludgechars for soil remediation. Moreover, nutrient supply was investigated to comprehensively assess the material's benefits for soils. All sludgechars were efficient (up to 100 %) for the removal of metal cations while their efficiency for metal(loid) anions was limited in aqueous solutions. Phosphates and sulphates were identified crucial for metal(loid) capture, based on SEM/EDS, XRD and MINTEQ findings. In soils, important fluctuations were observed for Zn, being partially immobilised by the sludgechars in high-Zntot soils, while partially solubilised in moderate to low-Zntot soils. Moreover, pH showed to be crucial for material stability, metal(loid) adsorption ability and their immobilisation in soils. Although metal(loid) retention was generally low in soils, nutrient enrichment was significant after sludgechar application. Long-term evaluation of the material sorption efficiency, nutrient supply, and ageing in soil environments will be necessary in future studies.

A review of the influence of heat drying, alkaline treatment, and composting on biosolids characteristics and their impacts on nitrogen dynamics in biosolids-amended soils

Application of biosolids to agricultural land has gained increasing attention due to their rich nutrient content. There are a variety of treatment processes for converting sewage sludge to biosolids. Different treatment processes can change the physicochemical properties of the raw sewage sludge and affect the dynamics of nutrient release in biosolids-amended soils. This paper reviews heat drying, alkaline treatment, and composting as biosolids treatment processes and discusses the effects of these treatments on biosolid nitrogen (N) content and availability. Most N in the biosolids remain in organic forms, regardless of biosolids treatment type but considerable variation exists in the mean values of total N and mineralizable N across different types of biosolids. The highest mean total N content was recorded in heat-dried biosolids (HDB) (4.92%), followed by composted biosolids (CB) (2.25%) and alkaline-treated biosolids (ATB) (2.14%). The mean mineralizable N value was similar between HDB and ATB, with a broader range of mineralizable N in ATB. The lowest N availability was observed in CB. Although many models have been extensively studied for predicting potential N mineralization in soils amended with organic amendments, limited research has attempted to model soil N mineralization following biosolids application. With biosolids being a popular, economical, and eco-friendly alternative to chemical N-fertilizers, understanding biosolids treatment effects on biosolids properties is important for developing a sound biosolids management system. Moreover, modeling N mineralization in biosolids-amended soils is essential for the adoption of sustainable farming practices that maximize the agronomic value of all types of biosolids.

The synergistic regulation of sewage sludge biodrying and greenhouse gas reduction by additives

As a dewatering method of high moisture solid waste sludge, biodrying still faces environmental problems such as material loss and greenhouse gas emission in the process of treatment. In this study, biochar and magnesium chloride were used to explore the synergistic effect of enhancing sludge biodrying and reducing greenhouse gas emissions. The highest temperature of biodrying was raised to 68.2 °C within 3 days, extending the longest high-temperature period to 5 days, which reduced the water content to 28.8 % in the single addition of biochar treatment. The complex addition increased the NH4+-N content of materials by 57.49 % and decreased the NO3--N content of materials by 40.62 %. The use of additives significantly reduced the emissions of CO2, CH4, and N2O compared to the no-addition treatment. The increase in dominant Actinomycetes and Chloroflexibacter was the main reason for the reduction in gas emissions.

Machine learning for municipal sludge recycling by thermochemical conversion towards sustainability

The sustainable disposal of high-moisture municipal sludge (MS) has received increasing attention. Thermochemical conversion technologies can be used to recycle MS into liquid/gas bio-fuel and value-added solid products. In this review, we compared energy recovery potential of common thermochemical technologies (i.e., incineration, pyrolysis, hydrothermal conversion) for MS disposal via statistical methods, which indicated that hydrothermal conversion had a great potential in achieving energy recovery from MS. The application of machine learning (ML) in MS recycling was discussed to decipher complex relationships among MS components, process parameters and physicochemical reactions. Comprehensive ML models should be developed considering successive reaction processes of thermochemical conversion in future studies. Furthermore, challenges and prospects were proposed to improve effectiveness of ML for energizing thermochemical conversion of MS regarding data collection and preprocessing, model optimization and interpretability. This review sheds light on mechanism exploration of MS thermochemical recycling by ML, and provide practical guidance for MS recycling.

Integral evaluation of effective conversion of sewage sludge from WWTP into highly porous activated carbon

Urban sewage sludge (SL) is a major concern due to the number of environmental problems it causes. Its application for different purposes is strictly regulated, limiting the possibilities of recycling and reusing this material. Thus, in this work, a complete study of a simple method to convert SL into activated carbon (AC) was carried out. The comprehensive study involves an evaluation of the main process parameters, such as the activating agent (AA) content (25 %, 33 %, 50 %), using the lowest amount of AA as novelty, different pyrolysis temperatures (600 and 800 °C), and purification conditions (6 M HCl:AC ratio, v:w). Under controlled and optimised conditions and through a single combined activation and pyrolysis step followed by acid purification, ACs with well-developed porosity can be obtained. Surface area values of around 870 m2/g and over 60 % carbon content were achieved, demonstrating that the prepared ACs could have applications in a wide variety of fields as high-value products. As an innovative aspect in this research, the gases streams and liquid effluents generated during the global process were analysed, achieving elimination of over 63 % of the concentration of the chemical elements contained in the SL during the chemical purification stage. Finally, mass, energy, and economic balances were carried out to estimate the production cost of AC derived from SL (<€ 8/kg AC).

Phosphorus recovery from sewage sludge ash (SSA): An integrated technical, environmental and economic assessment of wet-chemical and thermochemical methods

Incineration is a promising disposal method for sewage sludge (SS), enriching more than 90% of phosphorus (P) in the influent into the powdered product, sewage sludge ash (SSA), which is convenient for further P recovery. Due to insufficient bioavailable P and enriched heavy metals (HMs) in SSA, it is limited to be used directly as fertilizer. Hence, this paper provides an overview of P transformation in SS incineration, characterization of SSA components, and wet-chemical and thermochemical processes for P recovery with a comprehensive technical, economic, and environmental assessment. P extraction and purification is an important technical step to achieve P recovery from SSA, where the key to all technologies is how to achieve efficient separation of P and HMs at a low economic and environmental cost. It can be clear seen from the review that the economics of P recovery from SSA are often weak due to many factors. For example, the cost of wet-chemical methods is approximately 5∼6 €/kg P, while the cost of recovering P by thermochemical methods is about 2∼3 €/kg P, which is slightly higher than the current P fertilizer (1 €/kg P). So, for now, legislation is significant for promoting P recovery from SSA. In this regard, the relevant experience in Europe is worth learning from countries that have not yet carried out P recovery from SSA, and to develop appropriate policies and legislation according to their own national conditions.

Characteristic of phosphorus rich compounds in the incinerated sewage sludge ashes: a case for sustainable waste management

Growing concern over mineral resources supply forces us to search for alternative sources of Phosphorus. The possibility to recover phosphorus from incinerated sewage sludge ashes appears to be an important aspect in anthropogenic phosphorus cycle and sustainable economy. To make phosphorus recovery efficient it is important to learn the chemical and mineral composition of ash and phosphorus speciation. The phosphorus content in the ash was over 7%, what corresponds to medium rich phosphorus ores. The main phosphorus rich mineral phases were phosphate minerals. The most widespread was tri-calcium phosphate Whitlockite with various Fe, Mg and Ca proportions. In minority Fe-PO₄ and Mg-PO₄ were detected. Whitlockite commonly overgrown with hematite, influences negatively mineral solubility and thus recovery potential and indicates low bioavailability of phosphorus. Considerable amount of phosphorus was found in the low crystalline matrix where phosphorus content was around 10 wt% however low crystallinity and dispersed phosphorus also does not strengthen the potential to recover this element.

Biosolids-derived fertilisers: A review of challenges and opportunities

Soil application of biosolids as an organic fertiliser continues to be a cost-effective way to beneficially utilise its carbon and nutrient contents to maintain soil fertility. However, ongoing concerns over microplastics and persistent organic contaminants means that land-application of biosolids has come under increased scrutiny. To identify a way forward for the ongoing future use of biosolids-derived fertilisers in agriculture, the current work presents a critical review of: (1) contaminants of concern in biosolids and how regulatory approaches can address these to enable on-going beneficial reuse, (2) nutrient contents and bioavailability in biosolids to understand agronomic potential, (3) developments in extractive technologies to preserve and recover nutrients from biosolids before destructive dissipation when the biosolids are thermally processed to deal with persistent contaminants of concern (e.g. microplastics), and (4) use of the recovered nutrients, and the biochar produced by thermal processing, in novel organomineral fertilisers that match specific equipment, crop and soil requirements of broad-acre cropping. Several challenges were identified and recommendations for prioritisation of future research and development are provided to enable safe beneficial reuse of biosolids-derived fertilisers. Opportunities include more efficient technologies to preserve, extract and reuse nutrients from sewage sludge and biosolids, and the production of organomineral fertiliser products with characteristics that enable reliable widespread use across broad-acre agriculture.

Transformation and environmental risk of heavy metals in sewage sludge during the combined thermal hydrolysis, anaerobic digestion and heat drying treatment process

The design of this study was to investigate the solid-aqueous migration and chemical speciation transformation of heavy metals (HMs) in the sewage sludge during the combined process of thermal hydrolysis, anaerobic digestion and heat-drying. The results showed that most of the HMs were still accumulated in the solid phase of various sludge samples after treatment. After thermal hydrolysis, the concentrations of Cr, Cu and Cd increased slightly. All the HMs measured after anaerobic digestion were concentrated obviously. While the concentrations of all HMs decreased slightly after heat-drying. The stability of HMs in the sludge samples was enhanced after treatment. The environmental risks of various HMs were also relieved in the final dried sludge samples.

Microbiologically induced calcite precipitation for in situ stabilization of heavy metals contributes to land application of sewage sludge

Microbiologically induced calcite precipitation (MICP) has shed new light on solving the problem of in situ stabilization of heavy metals (HMs) in sewage sludge before land disposal. In this study, we examined whether MICP treatment can be integrated into a sewage sludge anaerobic digestion-land application process. Our results showed that MICP treatment not only prevented the transfer of ionic-state Cd from the sludge to the supernatant (98.46 % immobilization efficiency) but also reduced the soluble exchangeable Pb and Cd fractions by up to 100 % and 48.54 % and increased the residual fractions by 22.54 % and 81.77 %, respectively. In addition, the analysis of the stability of HMs in MICP-treated sludge revealed maximum reductions of 100 % and 89.56 % for TCLP-extractable Pb and Cd, respectively. Three-dimensional fluorescence, scanning electron microscopy-energy-dispersive X-ray spectroscopy, X-ray diffraction, and Fourier-transform infrared spectroscopy analyses confirmed the excellent performance of the ureolytic bacteria Sporosarcina ureilytica ML-2 in the sludge system. High-throughput sequencing showed that the relative abundance of Sporosarcina sp. reached 53.18 % in MICP-treated sludge, and the urease metabolism functional genes unit increased by a maximum of 239.3 %. The MICP technology may be a feasible method for permanently stabilizing HMs in sewage sludge before land disposal.

Evolution and Prospects in Managing Sewage Sludge Resulting from Municipal Wastewater Purification

Municipal sewage sludge is the residual material produced as a waste of municipal wastewater purification. It is a sophisticated multi-component material, hard to handle. For many years, it has been landfilled, incinerated, and widely used in agriculture practice. When unproperly discharged, it is very polluting and unhealthy. The rapidly increasing global amount of municipal sewage sludge produced annually depends on urbanization, degree of development, and lifestyle. Some diffused traditional practices were banned or became economically unfeasible or unacceptable by the communities. In contrast, it has been established that MSS contains valuable resources, which can be utilized as energy and fertilizer. The objective of the review was to prove that resource recovery is beneficially affordable using modern approaches and proper technologies and to estimate the required resources and time. The open sources of information were deeply mined, critically examined, and selected to derive the necessary information regarding each network segment, from the source to the final point, where the municipal sewage sludge is produced and disposed of. We found that developed and some developing countries are involved with ambitious and costly plans for remediation, the modernization of regulations, collecting and purification systems, and beneficial waste management using a modern approach. We also found that the activated sludge process is the leading technology for wastewater purification, and anaerobic digestion is the leading technology for downstream waste. However, biological technologies appear inadequate and hydrothermal carbonization, already applicable at full scale, is the best candidate for playing a significant role in managing municipal sewage sludge produced by big towns and small villages.