Enhanced removal of oxytetracycline from wastewater using bimetallic Fe/Ni nanoparticles combined with ZIF-8 nanocomposites

Green synthesis of diatom-allophane bio-nanocomposites for highly efficient oxytetracycline adsorption

The extensive use of the antibiotic oxytetracycline (OTC) has led to considerable environmental contamination and other negative impacts, prompting an urgent need for a green, effective, and innovative OTC adsorption material. In this study, diatom-allophane bio-nanocomposites were synthesized using a simple and eco-friendly method, yielding a homogeneous coating of allophane nanoparticles on diatom surfaces. The resultant bio-nanocomposites were found to have hierarchically porous structures and abundant active sites derived from successful allophane loading and dispersion on diatom surfaces. The OTC adsorption capacity of this novel adsorbent is remarkable (219.112 mg·g-1), surpassing the capacities of raw allophane and diatoms by >5 and 10 times, respectively. Mechanistically, OTC adsorption by the bio-nanocomposites was found to be driven primarily by chemisorption through a process involving complexation between the amide and amino groups on OTC and the aluminum hydroxyl and carboxyl groups on the adsorbent surface. Electrostatic interactions and hydrogen bonding also contribute significantly to OTC capture. Furthermore, the diatom-allophane bio-nanocomposites exhibit excellent performance over a wide pH range (4-7), in the presence of various cations (Na+, K+, Ca2+, Mg2+) and anions (Cl-, NO3-, SO42-), and in real water bodies. These findings demonstrate the potential of the diatom-allophane bio-nanocomposite as a green, efficient, and promising biological-mineral adsorbent for environmental remediation, leveraging the combined utilization of biological and mineral resources.

A Phosphorylated Dendrimer-Supported Biomass-Derived Magnetic Nanoparticle Adsorbent for Efficient Uranium Removal

A novel biomass-based magnetic nanoparticle (Fe3O4-P-CMC/PAMAM) was synthesized by crosslinking carboxymethyl chitosan (CMC) and poly(amidoamine) (PAMAM), followed by phosphorylation with the incorporation of magnetic ferric oxide nanoparticles. The characterization results verified the successful functionalization and structural integrity of the adsorbents with a surface area of ca. 43 m2/g. Batch adsorption experiments revealed that the adsorbent exhibited a maximum adsorption capacity of 1513.47 mg·g-1 for U(VI) at pH 5.5 and 298.15 K, with Fe3O4-P-CMC/G1.5-2 showing the highest affinity among the series. The adsorption kinetics adhered to a pseudo-second-order model (R2 = 0.99, qe,exp = 463.81 mg·g-1, k2 = 2.15×10-2 g·mg-1·min-1), indicating a chemically driven process. Thermodynamic analysis suggested that the adsorption was endothermic and spontaneous (ΔH° = 14.71 kJ·mol-1, ΔG° = -50.63 kJ·mol-1, 298. 15 K), with increasing adsorption capacity at higher temperatures. The adsorbent demonstrated significant selectivity for U(VI) in the presence of competing cations, with Fe3O4-P-CMC/G1.5-2 showing a high selectivity coefficient. The performed desorption and reusability tests indicated that the adsorbent could be effectively regenerated using 1M HCl, maintaining its adsorption capacity after five cycles. XPS analysis highlighted the role of phosphonate and amino groups in the complexation with uranyl ions, and validated the existence of bimodal U4f peaks at 380.1 eV and 390.1 eV belonging to U 4f7/2 and U 4f5/2. The results of this study underscore the promise of the developed adsorbent as an effective and selective material for the treatment of uranium-contaminated wastewater.

Recent advances in bimetallic nanoscale zero-valent iron composite for water decontamination: Synthesis, modification and mechanisms

The environmental pollution of water is one of the problems that have plagued human society. The bimetallic nanoscale zero-valent iron (BnZVI) technology has increased wide attention owing to its high performance for water treatment and soil remediation. In recent years, the BnZVI technology based on the development of nZVI has been further developed. The material chemistry, synthesis methods, and immobilization or surface stabilization of bimetals are discussed. Further, the data of BnZVI (Fe/Ni, Fe/Cu, Fe/Pd) articles that have been studied more frequently in the last decade are summarized in terms of the types of contaminants and the number of research literatures on the same contaminants. Five contaminants including trichloroethylene (TCE), Decabromodi-phenyl Ether (BDE209), chromium (Cr(VI)), nitrate and 2,4-dichlorophenol (2,4-DCP) were selected for in-depth discussion on their influencing factors and removal or degradation mechanisms. Herein, comprehensive views towards mechanisms of BnZVI applications including adsorption, hydrodehalogenation and reduction are provided. Particularly, some ambiguous concepts about formation of micro progenitor cell, production of hydrogen radicals (H·) and H2 and the electron transfer are highlighted. Besides, in-depth discussion of selectivity for N2 from nitrates and co-precipitation of chromium are emphasized. The difference of BnZVI is also discussed.

Bolivian natural zeolite as a low-cost adsorbent for the adsorption of cadmium: Isotherms and kinetics

Population growth in recent years has led to increased wastewater production and pollution of water resources. This situation also heavily affects Bolivia, so wastewater treatment methods and materials suitable for Bolivian society should be explored. This study investigated the natural Bolivian Zeolite (BZ) and its NaCl-modified structure (NaBZ) as adsorbents for cadmium removal from water. The natural BZ and the modified form NaBZ were investigated by different physicochemical characterization techniques. Furthermore, XPS and FT-IR techniques were used to investigate the adsorption mechanisms. The cadmium adsorption on BZ and NaBZ was analyzed using various mathematical models, and the Langmuir model provided a better description of the experimental adsorption data with cadmium adsorption capacities of 20.2 and 25.6 mg/g for BZ and NaBZ, respectively. The adsorption followed the pseudo-second order kinetics. The effect of different parameters, such as initial cadmium concentration and pH on the adsorption was studied. In addition, the results of the regeneration test indicated that both BZ and NaBZ can be regenerated by using hydrochloric acid (HCl). Finally, the adsorption experiment of BZ and NaBZ on a real water sample (brine from Salar de Uyuni salt flat) containing a mixture of different heavy metals was carried out. The results obtained in this study demonstrate the effectiveness of natural BZ and modified NaBZ in the removal of heavy metals from wastewater.

The origins of potentially superior properties and multifunctionalities of carbon-nano zero-valent iron in the carbonization pyrolysis process

Although carbon-nano zero-valent iron (C@nZVI) composites with unique properties have been used for environmental remediation, the origins of their superior properties and multifunctionalities of C@nZVI still need to be verified. Here, iron precursor nanoparticles (PML-Fe NPs) synthesized by Pinus massoniana Lamb and carbonized C@nZVI were systemically compared to reveal the origins of the structure and performance of C@nZVI composites. Characterizations showed that structure-modulated C@nZVI has favorable properties of good crystallinity, graphite carbon-rich structure but also defects when compared to PML-Fe NPs. The resultant carbon layer fundamentally improved its dispersion and anti-oxidation properties. Further experiments demonstrated that the evolution of material crystallinity, graphitization and defects affected the reaction pathway of hexavalent chromium (Cr(VI)), oxytetracycline hydrochloride (OTC), and 17β-estradiol (βE2). The multifunctionalities covered adsorption, reduction and catalytic oxidation. This study explains the origins of multifunctional C@nZVI by understanding the structure-property correlation in the carbonization process.

Fabricating Materials of Institute Lavoisier-53(Fe)/zeolite imidazolate framework-8 hybrid materials as high-efficiency and reproducible adsorbents for removing organic pollutants

Environmental pollution by emerging contaminants has become an urgent problem. Herein, novel binary metal-organic framework hybrids were constructed from Materials of Institute Lavoisier-53(Fe) (MIL-53(Fe)) and zeolite imidazolate framework-8 (ZIF-8) for the first time. A battery of characterizations were employed to determine the MIL/ZIF hybrids' properties and morphology. Furthermore, the MIL/ZIF towards toxic antibiotics (tetracycline, ciprofloxacin and ofloxacin) were studied to explore their adsorption abilities. The present work disclosed that the obtained MIL-53(Fe)/ZIF-8 = 2:3 possessed an eminent specific surface area with an admirable removal efficiency of tetracycline (97.4%), ciprofloxacin (97.1%) and ofloxacin (92.4%), respectively. The tetracycline adsorption process conformed to the pseudo-second-order kinetic model and this process was more compatible with the Langmuir isotherm model with the highest adsorption capacity of 215.0 mg g^-1. Moreover, the process of removing tetracycline was proved to be spontaneous and exothermic by the thermodynamic results. Furthermore, the MIL-53(Fe)/ZIF-8 = 2:3 towards tetracycline exhibited significant regeneration ability. The effects of pH, dosage, interfering ions and oscillation frequency on tetracycline adsorption capacity and removal efficiency were also investigated. The primary factors contributing to the decent adsorption ability between MIL-53(Fe)/ZIF-8 = 2:3 and tetracycline included electrostatic, π-π stacking, hydrogen bonding and weak coordination interactions. Additionally, we also investigated the adsorption ability in real wastewater. Thus, the proposed binary metal-organic framework hybrid materials can be deemed a promising adsorbent in wastewater purification.

Ligand Modulation on the Various Structures of Three Zinc(II)-Based Coordination Polymers for Antibiotics Degradation

The efficient removal of organic contaminants from wastewater is, nowadays, a prominent area of study due to its biological as well as environmental significance. Antibiotics are now found in wastewater because of their high use, which has become a source of aquatic pollution. These antibiotics have dangerous implications for people’s health. Hence, effective pharmaceutical removal from wastewater and contaminated water bodies, especially the removal of antibiotics, is of major interest to global research organizations. This is why it is necessary to investigate this class of toxic material in wastewater discharge. We synthesized three different coordination polymers (CPs) in the presence of various assistant carboxylate linkers, namely, [Zn(Hbtc)(dip)]n (1), [Zn4(1,2-bdc)4(dip)4]n (2), and [Zn(1,4-bdc)(dip)]n (3) (3,5-di(1H-imidazol-1-yl)pyridine = dip, 1,3,5-benzenetricarboxylic acid = H3btc, 1,2-benzenedicarboxylic acid = 1,2-H2bdc, and 1,4-benzendicarboxylic acid = 1,4-bdc). These CPs were characterized by using different techniques, including single-crystal X-ray diffraction. The structural studies demonstrated that in 2, there are four Zn(II) centers and both centers are in different coordination environments (Zn2 has distorted tetrahedral geometry, whereas Zn1, Zn3, and Zn4 have square pyramidal geometry). Hirshfeld surfaces analysis revealed that different types of intermolecular interactions (C⋯C, H⋯C, H⋯H, O⋯C, N⋯H, and O⋯H) are present in the synthesized CPs. We examined the different antibiotics, such as metronidazole (MDZ), nitrofurazone (NFZ), dimetridazole (DTZ), sulfasalazine(SLA), and oxytetracycline (OXY), degradation behaviors of the synthesized CPs, which showed remarkable degradation efficiency. 1 showed photocatalytic behavior toward the NFZ antibiotic in an aqueous media. This study also showed that these catalysts are stable and reusable under mild conditions.

Carbon nanotube-loaded copper-nickel ferrite activated persulfate system for adsorption and degradation of oxytetracycline hydrochloride

In this study, a new composite (MWCNTs-CuNiFe₂O₄) prepared by loading magnetic CuNiFe₂O₄ particles onto carboxylated carbon nanotubes (MWCNTs) through co-precipitation was applied to remove oxytetracycline hydrochloride (OTC-HCl) in solution. The magnetic properties of this composite could address of the issue of difficulty associated with the separation of MWCNTs from mixtures when applied as an adsorbent. In addition to the good adsorption properties recorded for MWCNTs-CuNiFe₂O₄ towards OTC-HCl, this developed composite could be used to activate potassium persulfate (KPS) for an efficient degradation of OTC-HCl. The MWCNTs-CuNiFe₂O₄ was systematically characterized using Vibrating Sample Magnetometer (VSM), Electron Paramagnetic Resonance (EPR) and X-ray Photoelectron Spectroscopy (XPS). The influence of dose of MWCNTs-CuNiFe₂O₄, the initial pH, the amount of KPS and the reaction temperature on the adsorption and degradation of OTC-HCl by MWCNTs-CuNiFe₂O₄ were discussed. The adsorption and degradation experiments showed that MWCNTs-CuNiFe₂O₄ exhibited an adsorption capacity of 270 mg·g^-1 for OTC-HCl with the removal efficiency 88.6% at 303 K (at an initial pH 3.52, 5 mg KPS, 10 mg composite, 10 mL reaction concentration 300 mg·L^-1 of OTC-HCl). The Langmuir and Koble-Corrigan models were used to describe the equilibrium process while the Elovich equation and Double constant model were suitable to describe the kinetic process. The adsorption process was based on single-molecule layer reaction and non-homogeneous diffusion process. The mechanisms of adsorption were complexation and hydrogen bond whereas active species such as SO₄^‧-, ^‧OH and ¹O₂ were confirmed to have played a major role in the degradation of OTC-HCl. The composite was also found to be very stable with good reusability property. These results confirm the good potential associated with the use of MWCNTs-CuNiFe₂O₄/KPS system for the removal of some typical pollutants from wastewater.

A new 3D 8-connected Cd(ii) MOF as a potent photocatalyst for oxytetracycline antibiotic degradation

1 exhibits the best photocatalytic decomposition efficiency towards antibiotic OXY. The plausible photocatalytic mechanism has been explained with the help of the density of states calculations and Hirshfeld surface analysis.